Commit Graph

164324 Commits

Author SHA1 Message Date
Marius Strobl
c0e3e9d4d2 - In gem_reset_rx() also reset the RX MAC which is necessary in order to
get it out of a stuck condition that can be caused by GEM_MAC_RX_OVERFLOW.
- In gem_reset_rxdma() call gem_setladrf() in order to reprogram the RX
  filter and restore the previous content of GEM_MAC_RX_CONFIG. While at it
  consistently use the newly introduced sc_mac_rxcfg throughout the driver
  instead of reading the its old content.
- Increment if_iqdrops instead of if_ierrors in case of RX buffer allocation
  failure.
- According to the GEM datasheet the RX MAC should also be disabled in
  gem_setladrf() before changing its configuration.
- Add error messages to gem_disable_{r,t}x() and take advantage of these
  throughout the driver instead of duplicating their functionality all over
  the place.

In joint forces with:	yongari
2011-06-28 16:16:43 +00:00
Sergey Kandaurov
1bb5e90ffd Run load_rc_config before stop_cmd definition, so that ${quotaoff_flags}
is correctly expanded inside stop_cmd instead of getting nothing.

PR:		conf/157687
Reported by:	Dmitry Banschikov <d.banschikov peterhost ru>
MFC after:	1 week
2011-06-28 14:26:34 +00:00
Hans Petter Selasky
a7e048a23f LibUSB v1.0: Need at least one frame when doing the dummy open
else clear stall won't work in that case.
2011-06-28 14:07:28 +00:00
Sergey A. Osokin
877854f667 Remove needless file due to Russia scraps DST in 2011. 2011-06-28 12:32:24 +00:00
Bjoern A. Zeeb
e0bfbfce79 Update packet filter (pf) code to OpenBSD 4.5.
You need to update userland (world and ports) tools
to be in sync with the kernel.

Submitted by:	mlaier
Submitted by:	eri
2011-06-28 11:57:25 +00:00
Edwin Groothuis
e6df989fe4 Remove AN again now that tzdata2011h has been imported. 2011-06-28 10:38:12 +00:00
Edwin Groothuis
14808f1355 MFV of tzdata2011h, r223627
- Russia scraps DST in 2011
- Remove Netherlands Antilles, add Bonaire, Curacao, Sint Maarten
2011-06-28 10:24:01 +00:00
Edwin Groothuis
0b50722bc1 Vendor import of tzdata2011h:
- Russia scraps DST in 2011
- Remove Netherlands Antilles, add Bonaire, Curacao, Sint Maarten

Obtained from:	ftp://elsie.nci.nih.gov/pub/
2011-06-28 10:11:40 +00:00
Bjoern A. Zeeb
a9b3947837 Compare port numbers correctly. They are stored by SRCPORT()
in host byte order, so we need to compare them as such.
Properly compare IPv6 addresses as well.

This allows the, by default, 8 badaddrs slots per address
family to work correctly and only print sendto() errors once.

The change is no longer applicable to any latest upstream versions.

Approved by:	roberto
Sponsored by:	Sandvine Incorporated
MFC after:	1 week
2011-06-28 09:46:25 +00:00
Sergey Kandaurov
235195988b Update ifc_len field of struct ifconf passed for the ioctl SIOCGIFCONF32
(i.e. under COMPAT_FREEBSD32) in case ifconf() returned success to match
the native SIOCGIFCONF behavior.

PR:		kern/158369
Reported by:	Paul Procacci <pprocacci att gmail com>
MFC after:	1 week
2011-06-28 08:41:44 +00:00
Kevin Lo
ee6eac62f7 Remove duplicate header includes 2011-06-28 08:36:48 +00:00
Martin Matuska
fbfed0cda6 Add a new "REFCOMPRESSRATIO" property.
For snapshots, this is the same as COMPRESSRATIO, but for
filesystems/volumes, the COMPRESSRATIO is based on the data "USED" (ie,
includes blocks in children, but not blocks shared with the origin).

This is needed to figure out how much space a filesystem would use if it
were not compressed (ignoring snapshots).

Illumos-gate revision:	13387

Obtained from:	Illumos (Feature #1092)
MFC after:	2 weeks
2011-06-28 07:52:01 +00:00
Martin Matuska
85a418012f Disable vdev cache (readahead) by default.
The vdev cache is very underutilized (hit ratio 30%-70%) and may consume
excessive memory on systems with many vdevs.

Illumos-gate revision:	13346

Obtained from:	Illumos (Bug #175)
MFC after:	1 week
2011-06-28 06:32:35 +00:00
Martin Matuska
855c382417 Allow mountpoints as arguments for the 'zfs get' command.
Illumos-gate revision:	13295

Obtained from:	Illumos (Feature #510)
MFC after:	1 week
2011-06-28 06:16:33 +00:00
Xin LI
c62908a982 Incorporate vendor commit ecdc5c0a7f7591a7cd4a:
In userland, sign extend the offset for JA instructions.

We currently use that to implement "ip6 protochain", and "pc" might be
wider than "pc->k", in which case we need to arrange that "pc->k" be
sign-extended, by casting it to bpf_int32.

PR:		kern/157188
Submitted by:	plosher
MFC after:	2 weeks
2011-06-28 00:58:12 +00:00
Adrian Chadd
7d12b6e172 Make sure the extended regdomain word is initialised.
As with the AR9285, the AR9287 has a default word of 0x1F which means
all the various bits in that field are set on by default.
2011-06-28 00:01:55 +00:00
Michael Tuexen
3c4401ecab Add support for SCTP_PR_SCTP_NONE which I misded to add.
This constant is defined in the socket API ID.

MFC after: 2 months.
2011-06-27 22:03:33 +00:00
John Baldwin
bda6775d59 Revert the entry point label to 'start' to unbreak the build.
Pointy hat to:	jhb
2011-06-27 21:43:56 +00:00
Pyun YongHyeon
50df388d0e Enable CPUSaver D102 E-step microcode loading for 82551 revision
0x10.
2011-06-27 21:37:38 +00:00
Pyun YongHyeon
e8449b7908 Disable microcode loading for 82550 and 82550C controllers. Loading
the microcode caused SCB timeouts. Linux driver does not allow
microcode loading for these controllers and jfv also confirmed that
there is no need to do and it shouldn't.

PR:				kern/103332
Additional confirmation from:	jfv
MFC after:			1 week
2011-06-27 21:27:12 +00:00
Hans Petter Selasky
88bf23ef94 Regenerate usb.conf after r223566. 2011-06-27 20:32:19 +00:00
Nathan Whitehorn
68a108e626 Build Scrt.o on powerpc64. Its introduction on other platforms got lost
during the period of time the powerpc64 port was on a project branch.
2011-06-27 16:24:36 +00:00
John Baldwin
4c7b01b9f8 - Remove the fake BPB from zfsldr. zfsldr doesn't support booting from
floppies, so it will not be used as the start of an emulated floppy
  image on a bootable CD which is what the fake BPB was used for.
- Only check that EDD packet mode is available once at the start of
  zfsldr rather than for each disk sector now that we read data in one
  sector at a time.  As a result, collapse the remaining bits of read
  up into nread and rename nread to read.
- Restore a return at the end of putstr that I removed in the previous
  revision.

Tested by:	Henri Hennebert (earlier version)
MFC after:	1 week
2011-06-27 13:58:24 +00:00
Stefan Eßer
cf78df8a0e Add macros to specify owner, group and mode of config files for installation.
Submitted by:	Chris Rees (crees)
2011-06-27 13:23:51 +00:00
Andrey V. Elsukov
671dfdbf11 EBR could contain an early stage of boot code. But we do not support it.
Remove message about non empty bootcode, we can not break something
while GEOM_PART_EBR_COMPAT is defined.

But without GEOM_PART_EBR_COMPAT any changes in EBR are allowed and we
can accidentally wipe the boot code. To do not break anything save
the first EBR chunk and keep it untouched each time when we are
changing EBR. Note that we are still not support boot code for EBR.

PR:		kern/141235
MFC after:	1 month
2011-06-27 12:42:48 +00:00
Gleb Smirnoff
812f1d32e7 Add possibility to pass IPv6 packets to a divert(4) socket.
Submitted by:	sem
2011-06-27 12:21:11 +00:00
Andrey V. Elsukov
61162e857a MS Windows NT+ uses 4 bytes at offset 0x1b8 in the MBR to identify
disk drive. The boot0cfg(8) utility preserves these 4 bytes when is
writing bootcode to keep a multiboot ability.
Change gpart's bootcode method to keep DSN if it is not zero. Also
do not allow writing bootcode with size not equal to MBRSIZE.

PR:		kern/157819
Tested by:	Eir Nym
MFC after:	1 month
2011-06-27 10:42:06 +00:00
Pawel Jakub Dawidek
a6de1e5c85 Compile hastd and hastctl with capsicum support.
X-MFC after:	capsicum merge
2011-06-27 09:15:41 +00:00
Pawel Jakub Dawidek
699b26bdce Compile capsicum support only if HAVE_CAPSICUM is defined.
MFC after:	3 days
2011-06-27 09:14:25 +00:00
Pawel Jakub Dawidek
133d75ed18 Log a warning if we cannot sandbox using capsicum, but only under debug level 1.
It would be too noisy to log it as a proper warning as CAPABILITIES are not
compiled into GENERIC by default.

MFC after:	3 days
2011-06-27 09:10:48 +00:00
Adrian Chadd
e1ab183c5e Print out a big warning if DFS can't find a channel to use.
This way people debugging DFS won't be surprised when their
AP stops talking.
2011-06-27 05:57:14 +00:00
Colin Percival
02d98cd4da Rewrite HISTORY: The SHA256 code first appeared in 6.0, and the SHA512
code in 9.0; neither existed in FreeBSD 4.0.
2011-06-27 02:10:10 +00:00
Jilles Tjoelker
4004e05e8a sh: Include <limits.h> instead of non-standard <sys/limits.h>. 2011-06-26 20:12:05 +00:00
Dimitry Andric
4b9414ab92 For some reason, contrib/traceroute/traceroute.c ensures MAXHOSTNAMELEN
is defined, but then proceeds to use a hardcoded maximum hostname length
of 64 anyway.  Fix this by checking against MAXHOSTNAMELEN instead.

PR:		bin/157732
MFC after:	3 days
2011-06-26 19:03:33 +00:00
Ed Schouten
1d9a9b79d0 Fix whitespace inconsistencies in libc in files copyrighted by me. 2011-06-26 18:27:17 +00:00
Ed Schouten
7c9669276e Fix whitespace inconsistencies in the TTY layer and its drivers owned by me. 2011-06-26 18:26:20 +00:00
Ed Schouten
aaa232d41d Fix various whitespace inconsistencies in sys/teken. 2011-06-26 18:25:10 +00:00
Tim Kientzle
79f67f37a7 The --newer-than test should descend into old
directories to look for new files.

PR:		bin/150890
Submitted by:	Tobias Herre
MFC after:	3 weeks
2011-06-26 17:54:11 +00:00
Nathan Whitehorn
9134df8b6f Add better error handling for RTAS calls. These can potentially cause
machine checks (e.g. invalid PCI configuration cycles), but these can
be caught and recovered from. This change also the RTAS PCI driver to
work without modification as a replacement for the Grackle driver on
Grackle-based Powermacs.
2011-06-26 16:11:36 +00:00
Nathan Whitehorn
1b17fa33dc Revert r223479. It is unnecessary and served only to slightly ameliorate
some manifestations of the bug actually fixed in r223485.
2011-06-26 15:08:14 +00:00
Adrian Chadd
3b34e0a097 .. this wasn't supposed to be committed! sorry. 2011-06-26 14:29:49 +00:00
Adrian Chadd
2fd9aabb1b Fix beacon transmission after a channel set.
The DFS code was tickling the channel set directly whilst going
through the state RUN -> CSA -> RUN. This only changed the channel;
it didn't go via ath_reset(). However in this driver, a channel
change always causes a chip reset, which resets the beacon timer
configuration and interrupt setup. This meant that data would go
out but as the beacon timers never fired, beacons would never
be queued.

The confusing part is that sometimes the state transition was
RUN -> SCAN -> CAC -> RUN (with CSA being in there sometimes);
going via SCAN would clear sc_beacons and thus the transition
to RUN would reprogram beacon transmission.

In case someone tries debugging why suspending a device currently
beaconing (versus just RX'ing beacons which is what occurs in STA
mode), add a silly comment which should hopefully land them at
this commit message. The call to ath_hal_reset() will be clearing
the beacon config and it may not be always reset.
2011-06-26 13:53:24 +00:00
Adrian Chadd
10dc8de41b Add ATH_ENABLE_DFS which enables the DFS flag so the DFS code
can be tested.

This doesn't at all actually do radar detection! It's just
so developers who wish to test the net80211 DFS code can easily
do so. Without this flag, the DFS channels are never marked
DFS and thus the DFS stuff doesn't run.
2011-06-26 13:43:15 +00:00
Gavin Atkinson
16169457f0 The SMCWUSBG is a zyd(4) device, not an uath(4) device. Remove from the
latter.

It appears that the addition to uath(4) came in through PR kern/135009,
which had tested another device, the SMCWUSBTG2, successfully with uath(4)
and included the SMCWUSBG as it "has the same chipset".  I can find no
other evidence that these two do actually share the same chipset.  Moreover,
Linux treats the SMCWUSBG as a zyd(4) device also.

This reverts r223537.

Discussed with:	hselasky, kevlo
MFC after:	1 week
2011-06-26 11:37:24 +00:00
Adrian Chadd
3cef2d90e3 I think 23dBm is the correct value to use here. CRDA uses 20dBm + 3dB max antenna
gain; I believe net80211 doesn't take antenna gain into account and leaves it
up to the driver to enforce. (ath_hal(4) certainly tries to do this.)
2011-06-26 10:34:01 +00:00
Adrian Chadd
1b8805b8aa Add a couple more frequency ranges to the FCC3 (FCC + DFS) regulatory domain.
The frequency range 5490MHz -> 5710MHz was opened up sometime in 2009, but
regdomain.xml wasn't updated.

FCC reference: (Section 15.407): http://louise.hallikainen.org/FCC/FccRules/2009/15/407/

The hole between 5600-5650MHz is due to a request from Airports using
a weather radar system which also utilises this range.
The GIT commit explaining this hole in more detail can be found here:

http://git.kernel.org/?p=linux/kernel/git/linville/wireless-regdb.git;a=commit;h=fcbf9225d56e82d9a4e506187d42285e76d81523
2011-06-26 10:32:09 +00:00
Kevin Lo
281f0ca8e7 Remove duplicate header includes 2011-06-26 10:07:48 +00:00
Adrian Chadd
e43496e5e6 Replace tab with 8 spaces, bringing it in line with the rest of the file. 2011-06-26 09:32:46 +00:00
Justin T. Gibbs
c41ba40947 cam/scsi/scsi_cd.c:
In cdregister(), hold the periph lock semaphore during changer
	probe/configuration.  This removes a window where an open of the
	cd device may succeed before probe processing has completed.
2011-06-26 01:32:46 +00:00
Justin T. Gibbs
5245d98d0f cam/cam_xpt.c:
In camisr_runqueue(), we need to run the sims queue regardless of
	whether or not the current peripheral has more work to do.  This
	reverts a change mistakenly made in revision 223081.

Reported by: ache
2011-06-26 01:14:54 +00:00