Create definitions for the Optional Asynchronous Events Supported (OAES)
values. Also adds a helper macro for the common use case of "mask and
shift". E.g.
value = NVME_CTRLR_DATA_OAES_NS_ATTR_MASK << NVME_CTRLR_DATA_OAES_NS_ATTR_SHIFT;
becomes
value = NVMEB(NVME_CTRLR_DATA_OAES_NS_ATTR);
Reviewed by: mav, imp
Differential Revision: https://reviews.freebsd.org/D34300
mmc_helper have an hard dependency on gpio_if.h
gpio(4) isn't in the default x86 kernel and none of the x86
sd/mmc drivers uses mmc_helper so just add a dependency on gpio.
Fixes: 85b3794cee ("files: Make ext_resources non-optional")
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
For RISC-V it was always enabled.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33835
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33834
The only valid condition for if_awg and aw_syscon is syscon.
EXT_RESOURCES is enabled in GENERIC since 12-CURRENT.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33833
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33832
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33831
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33830
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
Reviewed by: kevans
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33829
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33828
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33827
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33826
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33825
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33824
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33823
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33822
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33821
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33820
Use kern.elfXX.allow_wx to decide whether to map W+X or W-only memory.
Future work could expand this test to add an "allow_wx" axis to the
test matrix, but I would argue that a separate test should be written,
since that's orthogonal to map_at_zero.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
In the transport call on 12/3 Gleb asked to move the CC modules towards
using reference counting to prevent folks from unloading a module in use.
It was also agreed that Michael would do a user space utility like tcp_drop
that could be used to move all connections that are using a specific CC
to some other CC.
This is the half I committed to doing, making it so that we maintain a refcount
on a cc module every time a pcb refers to it and decrementing that every
time a pcb no longer uses a cc module. This also helps us simplify the
whole unloading process by getting rid of tcp_ccunload() which munged
through all the tcb's. Instead we mark a module as being removed and
prevent further references to it. We also make sure that if a module is
marked as being removed it cannot be made as the default and also
the opposite of that, if its a default it fails and does not mark it as being
removed.
Reviewed by: Michael Tuexen, Gleb Smirnoff
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D33249
The IBTA specification has new speed - NDR. That speed supports signaling
rate of 100Gb. mlx5 IB driver translates link modes reported by ConnectX
device to IB speed and width. Added translation of new 100Gb, 200Gb and
400Gb link modes to NDR IB type and width of x1, x2 or x4 respectively.
Linux commits:
f946e45f59ef01ff54ffb3b1eba3a8e7915e7326
MFC after: 1 week
Sponsored by: NVIDIA Networking
This reverts commit 489d7a8528.
The flag leaks into some port builds, causing them to fail. I will
recommit it with some sort of opt-out later on.
Reported by: mi
A panic has been observed on a system with a Intel X520 dual LAN
device. The panic is caused by a KASSERT() noticing that the amount
of VPD data copied out to the pciconf command does not match the
amount of data read from the device.
The cause of the size mismatch was VPD data that started with 0x82,
the VPD tag that indicates that a VPD ident follows, but with a length
of more than 255 characters, which happens to be the maximum ident
size supported by the API between kernel and the pciconf program.
The data provided did not resemble an actual VPD identifier, and it
can be assumed that the initial tag value 0x82 happens to be there
by accident.
An ident size of 255 far exceeds the sensible length of that data
element, which is in the order of at most 30 to 40 bytes.
This patch adds several consitstency checks to the VPD parser, the
most critical being that ident lengths of more than 255 bytes are
rejected. Other checks reject VPD with more than one ident tag or
with an empty (zero length) ident string.
This patch prevents the panic that occured when "pciconf -lV" was
executed on the affected system.
During the anaylsis of the issue and the VPD code it has been
found that the VPD parser uses a state machine that accepts tags
in any order and combination. This is a bad match for the actual
VPD data, which has a very simple structure that can be parsed
with a non-recursive direct descent parser (which always knows
exactly which token to expect next).
A review fpr a much simpler VPD parser that performs many more
consistency checks and rejects invalid VPD has been proposed in
review https://reviews.freebsd.org/D34268.
Reported by: mikej at paymentallianceintl.com (Michael Jung)
Approved by: jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D34255
Normally fsck_ffs never does reads or writes that are not aligned
to the size of one of the checked filesystems fragments. The one
exception is when it finds that it needs to write the superblock
recovery information. Here it will write with the alignment reported
by the underlying disk as its sector size as reported by an
ioctl(diskfd, DIOCGSECTORSIZE, &secsize).
Modern disks have a sector size of 4096, but for backward compatibility
with older disks will report that they have a sector size of 512.
When presented with a 512 byte write, they have to read the associated
4096 byte sector, replace the 512 bytes to be written, and write
the updated 4096 byte sector back to the disk. Unfortunately, some
disks report that they have 512 sectors, but fail writes that are not
aligned to 4096 boundaries and are a multiple of 4096 bytes in size.
This commit updates fsck_ffs(8) so that it uses the filesystem fragment
size as the smallest size and alignment for doing writes rather than
the disk's reported sector size.
Reported by: Andriy Gapon
MFC after: 1 week
