Firmware version 9.9.11 added support for hw_scan and is reportedly
causing more problems than 9.9.10 does. Until we get a chance to
test this out downgrade the firmware in order to help people testing
more.
Sponsored by: The FreeBSD Foundation
PR: 248235
MFC after: 2 days
X-MFC: just to get the reminder with the original commit
X-MFC with: 73d4ebea35
FSE_createCTable raises the warning because we stub out malloc() to
NULL in the kernel, so the passed in size is unused.
ZSTD_seqDecompressedSize has a variable whose value is only used in
assertions.
NB: These files are missing corresponding entries in sys/conf/files.
miivar.h includes opt_platform.h. Make sure all the drivers that use the
miibus_if.h interface file have opt_platform.h as well. While some of
these may not, strictly speaking, need it, it's easier to include it
universally for miibus.
Sponsored by: Netflix
As of today, using 'kldload miibus' is not equivalent to using 'device
miibus' in a kernel config. Newly introduced PHY drivers (DP83822,
DP83867, VSCPHY) and source files/PHY driver for FDT-enabled kernels
are missing. Without including them, kernel modules using any function
from dev/mii/mii_fdt.c refuse to load. Additionally, miivar.h directly
includes opt_platform.h.
Add the missing sources to the module build, with the FDT-only files
gated behind an OPT_FDT check. Maintain the alphabetical listing of
SRCS, but move the required header files to a separate line to improve
readability.
Reviewed by: mhorne, mindal@semihalf.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34256
For development, building a driver as kernel module is both convenient
and a time saver (no need for reboot on some change, testing it requires
just kldunload and kldload, a matter of seconds). For some special
cases, it may be even desirable to postpone initializing the network
interface after some action is done (loading a FPGA bitstream may be
required for Zynq/ZynqMP based hardware as an example).
Building is limited to ARM, ARM64 and RISC-V architectures (for Zynq,
ZynqMP, PolarFire Soc based boards, and HiFive based boards are known to
use CGEM at the moment).
Reviewed by: mhorne
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34687
Add man pages for rtw88 and rtw88fw. Install a copy of the firmware
license file and hook up the driver and firmware modules to the build.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Relnotes: yes
Import the most recent versions of the firmware images for the
rtw88 driver.
This is based on linux-firmware at 681281e49fb6778831370e5d94e6e1d97f0752d6.
The license of the firmware matches the previous rtwnfw(4) firmware
files (modulo a Copyright year) and you can find a copy in
sys/contrib/dev/rtw88fw/LICENCE.rtlwifi_firmware.txt.
Add build infrastructure to create the .ko files but do not yet hook
it up to the build until all parts are in the tree.
Approved by: core (imp)
MFC after: 2 weeks
Import rtw88 based on wireless-testing at
5d5d68bcff1f7ff27ba0b938a4df5849849b47e3 with adjustments for FreeBSD.
While our version of the driver has knowledge about the incapablity
of DMA above 4GB we do see errors if people have more than that
often already showing when laoding firmware.
The problem for that is currently believed to be outside this driver
so importing it anyway for now.
Given the lack of full license texts on non-local files this is
imported under the draft policy for handling SPDX files (D29226). [1]
Approved by: core (imp) [1]
MFC after: 2 weeks
Notable upstream pull request merges:
#9078: log xattr=sa create/remove/update to ZIL
#11919: Cross-platform xattr user namespace compatibility
#13014: Report dnodes with faulty bonuslen
#13016: FreeBSD: Fix zvol_cdev_open locking
#13019: spl: Don't check FreeBSD rwlocks for double initialization
#13027: Fix clearing set-uid and set-gid bits on a file when
replying a write
#13031: Add enumerated vdev names to 'zpool iostat -v' and
'zpool list -v'
#13074: Enable encrypted raw sending to pools with greater ashift
#13076: Receive checks should allow unencrypted child datasets
#13098: Avoid dirtying the final TXGs when exporting a pool
#13172: Fix ENOSPC when unlinking multiple files from full pool
Obtained from: OpenZFS
OpenZFS commit: a86e089415
- Adds FW logging support
- Once enabled, this lets the firmware print event and error messages
to the log, increasing the visibility into what the hardware is
doing; this is useful for debugging
- General bug fixes
- Adds inital DCB support to the driver
- Notably, this adds support for DCBX to the driver; now with the
fw_lldp sysctl set to 1, the driver and adapter will adopt a DCBX
configuration sent from a link partner
- Adds statistcs sysctls for priority flow control frames
- Adds new configuration sysctls for DCB-related features: (VLAN) user
priority to TC mapping; ETS bandwidth allocation; priority flow
control
- Remove unused SR-IOV files (until support gets added)
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Tested by: jeffrey.e.pieper@intel.com
MFC after: 3 days
MFC with: 213e91399b, e438f0a975
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34024
Define NO_WUNUSED_BUT_SET_VARIABLE for newer clang, and use it in ATH_C
to account for different clang versions. Use it in Makefiles as well.
Sponsored by: Netflix
Reviewed by: kevans, jhb
Differential Revision: https://reviews.freebsd.org/D34408
The ath driver has a lot of these warnings. It's an older driver, so
just supress these warnings until they can be fixed. They are a mix of
simple dead stores, debubgging output and stuff that would require
careful study to know if its safe to remove the access or not (there are
likely very few of the latter, but if there are any they are latent bugs
that compiler could optimize away). Since I have no ath hardware to test
on anymore, take the conservative approach.
Sponsored by: Netflix
The gunion(8) utility is used to track changes to a read-only disk on
a writable disk. Logically, a writable disk is placed over a read-only
disk. Write requests are intercepted and stored on the writable
disk. Read requests are first checked to see if they have been
written on the top (writable disk) and if found are returned. If
they have not been written on the top disk, then they are read from
the lower disk.
The gunion(8) utility can be especially useful if you have a large
disk with a corrupted filesystem that you are unsure of how to
repair. You can use gunion(8) to place another disk over the corrupted
disk and then attempt to repair the filesystem. If the repair fails,
you can revert all the changes in the upper disk and be back to the
unchanged state of the lower disk thus allowing you to try another
approach to repairing it. If the repair is successful you can commit
all the writes recorded on the top disk to the lower disk.
Another use of the gunion(8) utility is to try out upgrades to your
system. Place the upper disk over the disk holding your filesystem
that is to be upgraded and then run the upgrade on it. If it works,
commit it; if it fails, revert the upgrade.
Further details can be found in the gunion(8) manual page.
Reviewed by: Chuck Silvers, kib (earlier version)
tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D32697
Update to the latest firmware based on
linux-firmware at c53073d4e1485ac9f7cb065db466793c495aead7
and update firmware module Makefiles accordingly.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Import new code from iwlwifi-next at cb0a1fb7fd86b0062692b5056ca8552906509512
(matching tag: iwlwifi-next-for-kalle-2022-02-18).
Also add files not previously imported because we are not yet compiling
them to ease updating and having them when needed.
This adds MEI (Management Engine) support upstream which we cannot import
(currently GPL-only) so we have stub functions for the missing bits.
This also reduces the diff to upstream. Changes submitted to avoid
problems with const and with void * arithmetics were merged.
In the module build Makefile disable CONFIG_IWLWIFI_OPMODE_MODULAR
as we are building iwlwifi as a single module.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Parts of zstd, used in openzfs and other places, trigger a new clang 14
-Werror warning:
```
sys/contrib/zstd/lib/decompress/huf_decompress.c:889:25: error: use of bitwise '&' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
(BIT_reloadDStreamFast(&bitD1) == BIT_DStream_unfinished)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
While the warning is benign, it should ideally be fixed upstream and
then vendor-imported, but for now silence it selectively.
MFC after: 3 days
clang doesn't implement it, and Linux doesn't enforce it. As a
result, new instances keep cropping up both in FreeBSD's code and in
upstream sources from vendors.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D34144
A lot more generic cam related things were done in mmc_sim so this
simplifies the driver a lot.
Differential Revision: https://reviews.freebsd.org/D32154
Reviewed by: imp
GCC's -Wformat complains about NULL format strings passed to
iwl_fw_dbg_collect_trig (though the function handles NULL format
strings). Curious that upstream iwlwifi in Linux is built with GCC
and explicitly opts into this warning via the __printf() attribute.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D34146
TLS RX support is modeled after TLS TX support. The basic structures and layouts
are almost identical, except that the send tag created filters RX traffic and
not TX traffic.
The TLS RX tag keeps track of past TLS records up to a certain limit,
approximately 1 Gbyte of TCP data. TLS records of same length are joined
into a single database record.
Regularly the HW is queried for TLS RX progress information. The TCP sequence
number gotten from the HW is then matches against the database of TLS TCP
sequence number records and lengths. If a match is found a static params WQE
is queued on the IQ and the hardware should immediately resume decrypting TLS
data until the next non-sequential TCP packet arrives.
Offloading TLS RX data is supported for untagged, prio-tagged, and
regular VLAN traffic.
MFC after: 1 week
Sponsored by: NVIDIA Networking
This change adds convenience functions to setup a flow steering rule based on
a TCP socket. The helper function gets all the address information from the
socket and returns a steering rule, to be used with HW TLS RX offload.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Internal send queues are regular sendqueues which are reserved for WQE commands
towards the hardware and firmware. These queues typically carry resync
information for ongoing TLS RX connections and when changing schedule queues
for rate limited connections.
The internal queue, IQ, code is more or less a stripped down copy
of the existing SQ managing code with exception of:
1) An optional single segment memory buffer which can be read or
written as a whole by the hardware, may be provided.
2) An optional completion callback for all transmit operations, may
be provided.
3) Does not support mbufs.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Add i2c support to linuxkpi. This is needed by drm-kmod.
For every i2c_adapter added by i2c_add_adapter we add a child to the
device named "lkpi_iic". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
For every i2c_adapter added by i2c_bit_add_bus we add a child to the
device named "lkpi_iicbb". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
With the help of iic(4), this expose the i2c controller to userspace
allowing a user to query DDC information from a monitor.
e.g.: i2c -f /dev/iic0 -a 0x28 -c 128 -d r
will query the standard EDID from the monitor if plugged.
The bitbang part (lkpi_iicbb) isn't tested at all for now as I don't have
compatible hardware (all my hardware have native i2c controller).
Tested on: Intel (SandyBridge, Skylake, ApolloLake)
Tested on: AMD (Picasso, Polaris (amd64 and arm64))
MFC after: 1 month
Reviewed by: hselasky
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33053
This is intended to be used with forthcoming ice(4) driver version 1.34.2.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
