Commit Graph

2445 Commits

Author SHA1 Message Date
Eric Anholt
8ec9a6c5a6 Add support for i915 GMCH AGP. This diff is a combination of work by myself
and some fixes from Motomichi Matsuzaki.  Testing involved many people, but the
final, successful testing was from rwatson who endured several rounds of "it
crashes at XYZ stage" "oh, please correct this typo and try again."  The Linux
driver, and to a small extent the limited specs, were both used as a reference
for how to program the chipset.

PR:		kern/80396
Submitted by:	Martin Mersberger
2005-12-02 23:51:36 +00:00
Ruslan Ermilov
6a4cb6fd25 Fix the type of "eaddr" to guarantee the required alignment.
Suggested by:	marcel
2005-12-01 21:18:04 +00:00
Ruslan Ermilov
3faffd5dae Byte copy IF_LLADDR() on stack to align it to be safe for typecasts.
Tested by:	jhb
2005-11-30 17:48:23 +00:00
Eric Anholt
f0fc8e98b3 Add support for the i855GM, tested by an r300 user. 2005-11-29 04:53:22 +00:00
John Baldwin
f5e19c7342 Various fixes to make de(4) not panic after ru@'s IF_LLADDR() changes:
- Don't call tulip_addr_filter() to reset the RX address filter in
  tulip_reset() since that gets called before ether_ifattach().  Just
  call it in tulip_init_locked().
- Use be16dec() and le16dec() to parse MAC addresses when programming
  the RX filter.
- Let ether_ioctl() handle SIOCSIFMTU since we were doing the exact same
  thing with the added bonus that we leaked the driver lock if the MTU
  was > ETHERMTU in the homerolled version.  This part will be MFC'd.

Clue from:	wpaul (1)
Stolen from:	marcel (2 via patch for dc(4))
MFC after:	1 week
2005-11-21 21:50:07 +00:00
Jung-uk Kim
5c0619a7f0 0xb1881106 seems to be an AGP bridge and some BIOSes incorrectly handle
the bridge.  Therefore, we give the same treatment as we did for nForce3-250
and ULi chipsets.  VIA AGPv3 code was copied from agp_via.c.
2005-11-14 21:54:20 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Ruslan Ermilov
f5071cacb1 Catch up with IFP2ENADDR() type change (array -> pointer). 2005-11-11 12:17:31 +00:00
John Baldwin
13df733045 - Use callout_*() to manage the callout and make it MPSAFE.
- Fix locking in detach(), we only need to lock across vr_stop().

Tested by:	Mike Tancsa mike at sentex dot net
MFC after:	1 week
2005-10-31 21:37:27 +00:00
John Baldwin
aa14e8f4b4 Add the device ID for the VIA VT8235 south bridge.
PR:		kern/62438
Submitted by:	FUJIMOTO Kou fujimoto at j dot dendai dot ac dot jp
Tested by:	Oliver Fromme olli at secnetix dot de
MFC after:	1 week
2005-10-31 18:43:28 +00:00
John Baldwin
6647585e2d Some of the VIA pm and propm devices are actually the same device as the
PCI-ISA bridge.  Thus, when viapm0 or viapropm0 attaches, isab0 dosen't
attach so there is no isa0 bus hung off of that bridge.  In the non-ACPI
case, legacy0 will add an isa0 anyway as a fail-safe, but ACPI assumes that
any ISA bus will be enumerated via a bridge.  To fix this, call
isab_attach() to attach an isa0 ISA child bus device if the pm or propm
device we are probing is a PCI-ISA bridge.  Both drivers now have to
implement the bus_if interface via the generic methods for resource
allocation, etc. to work.  Also, we now add 2 new ISA bus drivers that
attach to viapm and viapropm devices.

PR:		kern/87363
Reported by:	Oliver Fromme olli at secnetix dot de
Tested by:	glebius
MFC after:	1 week
2005-10-31 18:31:16 +00:00
Bill Paul
bcb02fd532 Remove forgotten, no longer needed WB_UNLOCK() from the end wb_ioctl().
With this change, the driver tests good (at least on i386):

wb0: <Winbond W89C840F 10/100BaseTX> port 0xb800-0xb87f mem 0xe6800000-0xe680007f irq 12 at device 10.0 on pci0
miibus1: <MII bus> on wb0
amphy0: <Am79C873 10/100 media interface> on miibus1
amphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wb0: Ethernet address: 00:00:e8:18:2a:02
wb0: link state changed to DOWN
wb0: link state changed to UP
2005-10-28 02:17:40 +00:00
John Baldwin
80e963994a Fixup locking and mark MPSAFE.
- Add locked variants of init() and start().
- Use callout_*() to manage callout.
- Test IFF_DRV_RUNNING rather than IFF_UP in wb_intr() to see if we are
  still active when an interrupt comes in.

I couldn't find any of these cards anywhere to test on myself, and google
turns up references to FreeBSD and OpenBSD manpages for this driver when
trying to locate a card that way.  I'm not sure anyone actually uses these
cards with FreeBSD.

Tested by:	NO ONE (despite repeated requests)
2005-10-27 21:22:58 +00:00
John Baldwin
4cc88f8f33 - Use if_printf() and device_printf() and remove vr_unit from the softc.
I had to initialize the ifnet a bit earlier in attach so that the
  if_printf()'s in vr_reset() didn't explode with a page fault.
- Use M_ZERO with contigmalloc() rather than an explicit bzero.
2005-10-27 21:18:37 +00:00
Warner Losh
7b279558cc Replace FreeBSD 3.x syntax (controller miibus0) with 4.x syntax
(device miibus) in time for 7.0 :-)
2005-10-22 05:06:55 +00:00
Warner Losh
349920b201 Remove dc after repo copy. 2005-10-18 06:10:03 +00:00
John Baldwin
26390635de Only allow the sk(4) driver to attach to revision 2 of the LinkSys EG1032
cards and teach the re(4) driver to attach to revision 3 cards.

Submitted by:	Fredrik Lindberg fli+freebsd-current at shapeshifter dot se
MFC after:	2 weeks
Reviewed by:	imp, mdodd
2005-10-14 18:51:30 +00:00
Ruslan Ermilov
e019908ee7 In detach method, move if_free() after bus_teardown_intr(). 2005-10-13 21:11:20 +00:00
Yaroslav Tykhiy
45c11f832a Mark sk(4) as capable of handling extended VLAN frames. NICs
based on XMAC II chip should be ready for this in their initial
mode of operation, and Yukon-based NICs are configured so by
the driver.

PR:		kern/79998
MFC after:	1 month
2005-10-11 22:55:16 +00:00
Gleb Smirnoff
f0796cd26c - Don't pollute opt_global.h with DEVICE_POLLING and introduce
opt_device_polling.h
- Include opt_device_polling.h into appropriate files.
- Embrace with HAVE_KERNEL_OPTION_HEADERS the include in the files that
  can be compiled as loadable modules.

Reviewed by:	bde
2005-10-05 10:09:17 +00:00
Gleb Smirnoff
4092996774 Big polling(4) cleanup.
o Axe poll in trap.

o Axe IFF_POLLING flag from if_flags.

o Rework revision 1.21 (Giant removal), in such a way that
  poll_mtx is not dropped during call to polling handler.
  This fixes problem with idle polling.

o Make registration and deregistration from polling in a
  functional way, insted of next tick/interrupt.

o Obsolete kern.polling.enable. Polling is turned on/off
  with ifconfig.

Detailed kern_poll.c changes:
  - Remove polling handler flags, introduced in 1.21. The are not
    needed now.
  - Forget and do not check if_flags, if_capenable and if_drv_flags.
  - Call all registered polling handlers unconditionally.
  - Do not drop poll_mtx, when entering polling handlers.
  - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx.
  - In netisr_poll() axe the block, where polling code asks drivers
    to unregister.
  - In netisr_poll() and ether_poll() do polling always, if any
    handlers are present.
  - In ether_poll_[de]register() remove a lot of error hiding code. Assert
    that arguments are correct, instead.
  - In ether_poll_[de]register() use standard return values in case of
    error or success.
  - Introduce poll_switch() that is a sysctl handler for kern.polling.enable.
    poll_switch() goes through interface list and enabled/disables polling.
    A message that kern.polling.enable is deprecated is printed.

Detailed driver changes:
  - On attach driver announces IFCAP_POLLING in if_capabilities, but
    not in if_capenable.
  - On detach driver calls ether_poll_deregister() if polling is enabled.
  - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING
    flag. If there is no, then unlocks and returns.
  - In ioctl handler driver checks for IFCAP_POLLING flag requested to
    be set or cleared. Driver first calls ether_poll_[de]register(), then
    obtains driver lock and [dis/en]ables interrupts.
  - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable.
    If present, then returns.This is important to protect from spurious
    interrupts.

Reviewed by:	ru, sam, jhb
2005-10-01 18:56:19 +00:00
John Baldwin
d1754a9b9c - Use if_printf() and device_printf() in re(4) and remove rl_unit from
the softc.
- Use callout_init_mtx() and rather than timeout/untimeout in both rl(4)
  and re(4).
- Fix locking for ifmedia by locking the driver in the ifmedia handlers
  rather than in the miibus functions.  (re(4) didn't lock the mii stuff
  at all!)
- Fix some locking in re_ioctl().

Note: the two drivers share the same softc declared in if_rlreg.h, so they
had to be change simultaneously.

MFC after:	 1 week
Tested by:	several on rl(4), none on re(4)
2005-09-29 16:52:19 +00:00
John Baldwin
dc6f00687c Use if_printf() and device_printf(). 2005-09-29 16:47:08 +00:00
John Baldwin
ccb7a62ef7 Typo. 2005-09-29 15:04:58 +00:00
Jung-uk Kim
d8e205ef93 - Add a work-around for nForce3-250. Aperture base address encoded in misc.
control register and AGP bridge seems to be inconsistent with some BIOS.
Instead of relying on BIOS settings, we just take the initial aperture size
and encode them for both miscellaneous control register and AGP bridge.
Some idea was borrowed from agp_nvidia.c.

- Add preliminary ULi M1689 chipset support.  The idea was taken from Linux
because hardware and documentation are unavailable.  Not tested.

- Add more VIA chipset PCI IDs taken from Linux driver.

Approved by:	anholt (mentor)
Tested by:	Adam Gregoire <ebola at psychoholics dot org>
		Ganael Laplanche <ganael.laplanche at martymac dot com>
		K Wieland <kwieland at wustl dot edu>
2005-09-27 20:57:50 +00:00
Max Laier
b6de9e91bd Remove bridge(4) from the tree. if_bridge(4) is a full functional
replacement and has additional features which make it superior.

Discussed on:	-arch
Reviewed by:	thompsa
X-MFC-after:	never (RELENG_6 as transition period)
2005-09-27 18:10:43 +00:00
John Baldwin
25067ba265 Small fixes to sis(4):
- Remove sis_unit and use device_printf() and if_printf() instead.
- Use callout_init_mtx() for the callout.
- Remove spls.
- Fix locking for ifmedia to happen in the ifmedia handlers rather than in
  sis_ioctl().
- Log an error message if we fail to allocate any resources.  Perform
  cleanup if we fail to allocate any resources so that we don't leave
  a mutex hanging around.

Tested by:	Jason Tsai jason dot tsai at newcyberian dot com (1-4)
MFC after:	3 days
2005-09-26 18:42:27 +00:00
Poul-Henning Kamp
ca72f67d70 Use the new bus_space/resource convenience functions. 2005-09-24 20:46:02 +00:00
Poul-Henning Kamp
f38deea185 Move code macros from if_sis*reg*.h to if_sis.*c* 2005-09-20 09:52:53 +00:00
Eric Anholt
e3e1ac8615 Add a new AGP driver for ATI IGP chipsets. The driver is based on reading of
the Linux driver, since specs are unavailable.  Many thanks to Adam Kirchhoff
for multiple useful testing cycles, and Ralf Wostrack for the final fix to get
it working.

PR:		i386/75251
Submitted by:	anholt
2005-09-17 03:36:47 +00:00
Eric Anholt
695b15ca91 Fix agp_nvidia.c to behave more like the linux driver, fixing DRI on Radeon
9200 according to one responder.  The primary issue was not setting some bits
to say that the entries were active, but also fix one place where some memory
wasn't being used as volatile as it should.  While here, change some use of ffs
to a relatively short case statement, to make it more obvious what's going on.

PR:		kern/71638, kern/72372, kern/71547?
Submitted by:	Andrew J. Caines <A.J.Caines@halplant.com>,
		Robin Schoonover <end@endif.cjb.net>,
		Jason Henson <jason@ec.rr.com>
2005-09-16 22:59:47 +00:00
Ruslan Ermilov
3badacee8c Fix "struct ifnet" leaks when attach() fails in the middle, e.g.
when mii_phy_probe() or bus_setup_intr() fails.  For drivers that
call their detach() in this case, call if_free() there to cover
this case too.
2005-09-16 11:11:51 +00:00
Giorgos Keramidas
4f867c2d17 When bus_alloc_resource_any() fails, dc_detach() is called and it
attempts to deallocate busdma tags and resources that haven't been
allocated yet, causing a panic every time a dc interface fails to
attach.  Fix by checking that we really have something to dealloc
before calling bus_dma*() functions.

Approved by:	jhb
MFC after:	1 week
2005-09-15 17:51:39 +00:00
John Baldwin
8d75d3087d - Fixup locking and mark MPSAFE.
- Use callout_init_mtx() and static callouts rather than timeout().
- m_getcl() in one place to simplify the code.

Tested by:	Gavin Atkinson gavin dot atkinson at ury dot york dot ac dot uk
MFC after:	1 week
2005-09-15 17:12:29 +00:00
Ruslan Ermilov
8d7a953fb2 Fixed "Memory modified after free" panic in rl_detach() due
to rl_stop() accessing already freed "struct ifnet".

Fixed LOR between rl mutex and some ACPI mutex in rl_detach().
2005-09-14 12:33:23 +00:00
John Baldwin
7afed9d69a Use if_printf() and device_printf() for printf's and remove the unit number
from the softc.

MFC after:	3 days
2005-08-31 18:03:18 +00:00
John Baldwin
a6c222c739 Various locking fixes and mark MPSAFE:
- Add locked variants of start(), init(), ifmedia_upd(), and poll() and stop
  recursing on the driver lock.
- Add locking to ifmedia_upd() and ifmedia_sts().
- Use callout_*() instead of timeout/untimeout.
- Fix locking in ioctl().

Tested by:	Bob Bishop rb at gid dot co dot uk
MFC after:	3 days
2005-08-30 20:35:08 +00:00
Warner Losh
919ccba73e Better comment 2005-08-29 18:45:21 +00:00
Warner Losh
667b0824d7 Fix another instance of old info re: miibus 2005-08-29 17:03:31 +00:00
Warner Losh
c3b6bc1a2a Fix obsolete comment.
MFC After: 2 days
2005-08-29 16:48:28 +00:00
John Baldwin
dbc2a95f40 - Use m_defrag() instead of homerolling our own variant
tulip_mbuf_compress().  If we fail to allocate a new mbuf to copy the
  data into, put the mbuf back in the driver's send queue so that we can
  retry it later rather than throwing the packet away.
- Use m_devget() instead of doing it inline ourselves in the
  TULIP_COPY_RXDATA case.  If we fail to allocate an mbuf to copy the data
  into, don't forget about the original mbuf cluster.  The old code would
  lose the pointer and leak the cluster in that case.  Now it doesn't lose
  it but always sticks the original rx buffer back into the receive ring
  after trying to copy the data out and send it up the stack.  Also, if we
  fail to allocate a new mbuf to copy the data into, log an input error.
  Also, don't combine the priming case with the received-a-packet case to
  make the code flow a bit clearer and easier to follow.
2005-08-26 14:27:38 +00:00
John Baldwin
4faaaed479 - Remove non-bus-dma code.
- Remove form feed characters.
- Fixup style of function declarations.
- Assume that an mbuf cluster is big enough to hold an ethernet frame.
  (This should really be using m_defrag(), but this diff is just simple
  changes for now.)
2005-08-25 21:06:56 +00:00
John Baldwin
f8190d8dc8 Major rototill of this driver to add FreeBSD bus-dma support:
- Allocate arrays of metadata for the descriptors in the rx and tx rings
  and change the ring pointers to walk the metadata array rather than the
  actual descriptor rings.  Each metadata object contains a pointer to its
  descriptor, a pointer to any associated mbuf, and a pointer to the
  associated bus_dmamap_t in the bus_dma case.  The mbuf pointers replace
  the tulip_txq and tulip_rxq local ifqueue's in the softc.
- Add lots of KTR trace entries using a local KTR_TULIP level which
  defaults to 0, but can be changed to KTR_DEV at the top of the file
  when debugging.
- Rename tulip_init(), tulip_start(), tulip_ifinit(), and tulip_ifstart()
  to tulip_init_locked(), tulip_start_locked(), tulip_init(), and
  tulip_start(), respectively, to match the convention in other drivers.
- Add a TULIP_SP_MAC() macro to encode two bytes of the MAC address into
  the setup buffer and use that in place of lots of BYTE_ORDER #ifdef's.
  Also, remove an incorrect XXX comment I added earlier, the driver was
  correct (at least it does the same thing dc(4) does).  TULIP_SP_MAC
  was shamelessly copied from DC_SP_MAC() in dc(4).
- Remove the #ifdef'd NetBSD bus-dma code and replace it with FreeBSD
  bus-dma code that not only compiles but even works at runtime.
- Use callout_init_mtx() instead of just callout_init().
- Correct the various wrapper macros for bus_dmamap_sync() for the rx
  and tx buffers to only ask for the sync ops that they actually need.
- Tidy the #ifdef TULIP_COPY_RXDATA code by expanding an #ifdef a bit
  so it becomes easier to read at the expense of a couple of duplicated
  lines of code.  Also, use m_getcl() to get an mbuf cluster rather than
  MGETHDR() followed by MCLGET().
- Maintain the ring free (ri_free) count for the rx ring metadata since
  we no longer have tulip_rxq.ifq_len around to indicate how many mbuf's
  are currently in the rx ring.
- Add code to teardown bus_dma resources when attach fails and generally
  fixup attach to do a better job of cleaning up when it fails.  This
  gets us a good bit closer to possibly having a detach method someday
  and making this driver an unloadable module.
- Add some functions that can be called from ddb to dump the state of
  a descriptor ring and to dump the state of an individual descriptor.
- Various comment grammer and spelling fixes.

I have bus-dma turned on by default, but I've left the non-bus-dma code
around so that it can be turned off to aid in debugging should any problems
turn up later on.  I'll be removing the non-bus-dma code in a subsequent
commit.
2005-08-25 20:12:43 +00:00
John Baldwin
997452064e Various fixups to locking:
- Remove a lot of superfluous locking during attach.  There is no need
  to lock access to the driver until some other thread has a way of getting
  to it.  For ethernet drivers the other ways include registering an
  interrupt handler via bus_setup_intr(), calling ether_ifattach() to hook
  into the network stack, and kicking off a callout-driven timer via
  callout_reset().
- Use callout_* rather than timeout/untimeout.
- Break out of xl_rxeof() if IFF_DRV_RUNNING is clear after ifp->if_input
  returns to handle the case where the interface was stopped while we were
  passing a packet up the stack.  Don't call xl_rxeof() in xl_rxeof_task()
  unless IFF_DRV_RUNNING is set.  With these fixes in place, any
  outstanding task will gracefully terminate as soon as it gets a chance to
  run after the interface has been stopped via xl_stop().  As a result,
  taskqueue_drain() is no longer required in xl_stop().  The task is still
  drained in detach() however to make sure that detach() can safely destroy
  the driver mutex at the end of the function.
- Lock the driver lock in the ifmedia callouts and don't lock across
  ifmedia_ioctl() in xl_ioctl().

Note: glebius came up with most of (3) as well independently.  I took a
rather roundabout way of arriving at the same conclusion.

MFC after:	3 days
2005-08-18 19:24:30 +00:00
John Baldwin
c8b27aca43 Fixup locking and mark MPSAFE:
- Add locked versions of start and init.  The SRM_MEDIA code in dc_init()
  stayed in dc_init() instead of moving to dc_init_locked() to make the
  locking saner.
- Use callout_init_mtx().
- Fixup locking in detach and ioctl.
- Lock the driver in the ifmedia callouts.
- Don't recurse on the driver lock.
- De-spl.

MFC after:	3 days
2005-08-18 19:10:07 +00:00
John Baldwin
2a3e25a07f Fixup locking for sf(4) and mark MPSAFE:
- Add locked variants of start, init, and ifmedia_upd.
- Use callout_* instead of timeout/untimeout.
- Don't recurse on the driver lock.
- Fixup locking in ioctl.
- Lock the driver lock in the ifmedia handlers rather than across
  ifmedia_ioctl().

Tested by:	brueffer
MFC after:	3 days
2005-08-18 17:09:16 +00:00
John Baldwin
8a8573fdb2 - Use htole32() instead of using bswap32() conditional on #if BYTE_ORDER.
- Don't set IFF_ALLMULTI in our ifnet's if_flags if we end up allowing
  all multicast due to limits in the MAC receive filters in hardware.

Requested by:	rwatson (2)
2005-08-17 17:46:51 +00:00
John Baldwin
6da5b383f1 Remove the unused TULIP_CSR_{READ,WRITE}BYTE macros. 2005-08-17 17:45:19 +00:00
John Baldwin
f512b596a8 Use callout_init_mtx() to simplify the stats callout.
MFC after:	3 days
2005-08-17 17:44:58 +00:00
John Baldwin
f68d1644f8 Use device_printf() and if_printf() and remove ste_unit from the softc. 2005-08-17 14:37:39 +00:00
Bjoern A. Zeeb
e3c18d1d11 * Solve "No PHY found" problem for more Yukon Lite variants.
* Catch a bus attach error.
* Improve locking.

MFC after:	6 days
2005-08-13 11:13:12 +00:00
John Baldwin
22f6205d3b Use device_printf() and if_printf() and remove dc_unit from softc. 2005-08-10 20:33:46 +00:00
John Baldwin
fc8c1e5d98 Use if_printf() and device_printf() and axe sf_unit from the softc as a
result.
2005-08-10 20:24:39 +00:00
John Baldwin
fcde23065f Call tulip_start() rather than tulip_ifstart() from the interrupt handler
to avoid recursing on the driver lock.  Not sure why my test box didn't
catch this earlier.

MFC after:	3 days
2005-08-09 21:53:26 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
John Baldwin
718e387c34 Fix up the locking in pcn(4) and mark it MPSAFE.
- Add locked versions of the init() and start() methods.
- Use callout_*() rather than timeout().
- Make the driver lock non-recursive.
- Push down locking in detach() and ioctl().
- Fix the tick routine to bail if the interface has been stopped and use
  callout_drain() in detach() after the call to stop().
- Lock the driver lock in the ifmedia handlers.

Tested by:	Ketrien I. Saihr-Kesenchedra ketrien at error404.nls.net
MFC after:	1 week
2005-08-05 16:03:16 +00:00
Anton Berezin
32aa5f0e3e Recognize D-Link DGE-528(T) Gigabit as an re(4) device.
Submitted by:	Andrus Nomm <andrus@members.ee>
PR:		76780
MFC After:	1 week
2005-08-05 08:19:12 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
John Baldwin
d0e98e85f8 - Use callout_*() rather than timeout() to periodically poll the media.
- Add locking to protect the softc and mark this driver as MP safe.  There
  are still some edge cases with multiport cards that need more locking
  work.

MFC after:	1 week
Tested on:	alpha
2005-07-27 13:51:01 +00:00
John Baldwin
8bc92074e8 Fix a typo in the name of the dmamap for a bus_dmamap_sync().
MFC after:	3 days
2005-07-27 13:48:45 +00:00
Warner Losh
6fa45429f9 The 575A doesn't have funcregs in memio. So don't claim that it does.
This gets my 575A card probing.

Card provided by: James Flemer
MFC After: 3 days
2005-07-27 06:38:55 +00:00
John Baldwin
9cc8edda00 - Use the PCIR_BAR() macro rather than hardcoding rids.
- Use pci_enable_busmaster() rather than fiddling with the PCI command
  register directly.
2005-07-21 16:43:07 +00:00
John Baldwin
88519d6427 Don't set if_start to tulip_ifstart all over the place. It is already
set in tulip_attach() and its value is never changed, so all the extra sets
are redundant.  I'm guessing that at some point in time de(4) had an
alternate start routine, but that hasn't been true in recent history.
2005-07-21 16:42:21 +00:00
John Baldwin
fe0c8544ff Remove conditional code that has largely rotted that is also not on by
default:
- TULIP_NEED_FASTTIMEOUT - tulip_fasttimeout() wasn't called anywhere
- BIG_PACKET - only worked on i386 anyway
- TULIP_USE_SOFTINTR - doesn't compile and was never updated to handle
  new netisr registration
- non-FreeBSD code
2005-07-21 16:40:08 +00:00
John Baldwin
9862c11e9d Use get_cyclecount() rather than hardcoding rdtsc and rpcc in asm for i386
and alpha, respectively.
2005-07-21 16:34:14 +00:00
John Baldwin
e5e871963c Fix a typo and some whitespace nits. 2005-07-21 16:33:05 +00:00
Gleb Smirnoff
016fcebe90 NET_LOCK_GIANT() when entering network code.
Pointy hat to:	glebius
Reported by:	rodrigc
2005-07-13 14:06:13 +00:00
Max Laier
ade6e491fc ALTQify ste(4).
Requested and tested by:	<nike_d at cytexbg dot com>
Approved by:			re (scottl)
2005-07-08 13:05:59 +00:00
Scott Long
8225bf4c36 Fix ifnet fallout in if_ti.
Reviewed by: brooks
Approved by: re
2005-07-07 01:05:45 +00:00
Eric Anholt
11b0d58251 Make the initialization in the AGPv3 case match that of Linux. Fixes hangs on
X startup with DRI enabled, with a v3-capable card.

Tested by:	Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Approved by:	re (scottl)
2005-06-26 04:01:11 +00:00
Brooks Davis
cd036ec193 Move if_alloc() up so it's before mii_phy_probe(). 2005-06-11 01:37:46 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Gleb Smirnoff
e9ace2571c Calling xl_rxeof() at the end of xl_start_locked() leads to recursion
in case of IP fast forwarding. Enqueue a taskqueue(9) task instead of
calling xl_rxeof() directly.

Reported & tested by:	Slava Alpatov
Reviewed by:		wpaul
MFC after:		1 week
2005-05-20 07:16:09 +00:00
Bjoern A. Zeeb
261a19c1ee Deal with failed malloc calls[1].
While there also check for failed device_add_child calls.

Found by:	Coventry Analysis tool[1].
Submitted by:	sam[1]
Approved by:	pjd (mentor)
MFC after:	1 week
2005-04-25 10:18:24 +00:00
Warner Losh
6d431b17c9 Fix newer Xircom CBE2-100 cards that were reporting
dc0: MII without any PHY!
We have to enable the connection to the MII first.  Doing so fixes the
problem cards without breaking the older, working cards.

Bad card provided by: deischen
2005-04-18 03:31:29 +00:00
Matthew N. Dodd
c7ae8b4fa8 Invert conditional and use continue to reduce nesting. 2005-04-13 01:32:06 +00:00
David E. O'Brien
fd92279bef Add nForce3-250. 2005-04-08 18:04:39 +00:00
David E. O'Brien
824a5e96dc nVidia AGP chipsets beyond nForce2 are AMD64-specific.
So move the AGP support to there.

Submitted by:	Jung-uk Kim <jkim@niksun.com>
2005-04-02 01:10:09 +00:00
Scott Long
69bbb4fe70 If resource allocation fails, we could wind up freeing the cdev without it
being allocated.  Add a simple check for this.

Submitted by: yongari
2005-03-31 17:16:40 +00:00
David E. O'Brien
f6bb4f25a4 Bring rev 1.31 to the AMD64 platform.
This adds support for the SiS intergrated NIC on some Athlon64 motherboards.
The MAC address is stored in the APC CMOS RAM and this fixes the
sis driver ending up with a 00:00:00:00:00:00 MAC address.

Submitted by:	Stasys Smailys <ssmailys@komvista.lt>
2005-03-28 18:06:44 +00:00
Sam Leffler
52c94c38dc deal with malloc failure when setting up the multicast filter
Noticed by:	Coverity Prevent analysis tool
2005-03-26 23:26:49 +00:00
Sam Leffler
af5691cdd5 handle malloc failure and sk_vpd_prodname potentially being null for
other reasons

Noticed by:	Coverity Prevent analysis tool
Reviewed by:	bz, jmg
2005-03-26 22:57:28 +00:00
Ruslan Ermilov
77d23c9bc3 xl(4) meets polling(4). Hardware for this work kindly provided by
Eric Masson.

MFC after:	3 weeks
2005-03-26 20:22:58 +00:00
Scott Long
586cfbb265 Start the process of modernizing the Tigon driver by using busdma for the
descriptor and configuration data.  Thanks to Martin Nilsson for providing
hardware.
2005-03-21 07:17:27 +00:00
Bjoern A. Zeeb
e7f8ebb45e Do not try to free non allocated memory in error case.
Do our best to plug some memory leaks (VPD data, jumbo memory buffer,...).
Log if we cannot free because memory still in use[1].
Change locking to avoid ''acquiring duplicate lock of same
  type: "network driver"'' and potential deadlock. Also seems to fix LOR #063.

[1] This change does not solve problems if buffers are still in use when
    unloading if_sk.ko. There is ongoing work which will address jumbogram
    allocations in a more general way.

PR:		kern/75677 (with changes, no mii fixes in here)
Tested by:	net, Antoine Brodin (slightly different version)
Approved by:	rwatson (mentor)
MFC after:	5 days
2005-03-17 14:27:22 +00:00
Bjoern A. Zeeb
9f0877efe3 * Lower interrupt moderation timer 200->100.
Obtained from:	NetBSD if_sk.c rev. 1.11

* Make interrupt moderation configurable via sysctl/tuneable.
PR:		kern/41220
Approved by:	rwatson (mentor)
2005-03-17 14:23:13 +00:00
Bjoern A. Zeeb
2dfd4c0a21 * Improve chip identification.
Obtained from:	NetBSD if_sk.c rev. 1.11

* Take PHY out of reset for Yukon Lite Rev. A3.
Submitted by:	postings on net@ in thread "skc0: no PHY found", 2005-02-22

Tested by:	net
Approved by:	rwatson (mentor)
MFC after:	5 days
2005-03-17 14:21:51 +00:00
Bjoern A. Zeeb
d34019b31e * When adding/deleting multicast addresses, only whack the address filter
if the interface is marked RUNNING.
Obtained from:	NetBSD if_sk.c rev. 1.12

* Don't initialize the card (and start an autonegotiation) every time the IP
  address changes. Makes 'dhclient sk0' invocations way faster and more
  consistant. i.e. one DHCPREQUEST elicits the DHCPACK.
Obtained from:	OpenBSD if_sk.c rev. 1.56

* Additional locking changes in sk_ioctl.

PR:		kern/61296 should see improvements by the last two.
Approved by:	rwatson (mentor)
MFC after:	5 days
2005-03-17 14:18:58 +00:00
Scott Long
ab0d8702bf Bugger, wiped out a needed comma in the previous commit. 2005-03-09 00:54:55 +00:00
Scott Long
c1b677aa80 The DC driver asks for an alignment of PAGE_SIZE for data buffers, but also
asks that each buffer be (2048 * 256) bytes long.  I suspect that alignment
isn't a real requirement since busdma only recently started honoring it.  The
size is also bogus.  Fix both of these and stop busdma from trying to
exhaust the system memory pool with bounce pages.

Submitted by: Kevin Oberman
MFC After: 7 days
2005-03-08 23:25:46 +00:00
Olivier Houchard
4ac78327de Add device id for the Ali M1671 host to AGP bridge. 2005-02-27 13:05:34 +00:00
Warner Losh
576f8ba203 Add back 'n' that went missing in last commit 2005-02-25 03:43:43 +00:00
Warner Losh
d24ae19d0e Fix style(9) issues with __P removal.
Noticed by: bde
2005-02-24 22:33:05 +00:00
Warner Losh
d701c91325 Return BUS_PROBE_DEFAULT instead of 0. 2005-02-24 21:32:56 +00:00
Eric Anholt
9271f7b6d5 Correct the SiS 755 PCI ID. Confirmed against Linux code.
PR:		kern/76411
Submitted by:	Jonathan Fosburgh, jonathan at fosburgh dot org
Obtained from:	Jung-uk Kim, jkim at niksun.com
2005-02-14 07:30:04 +00:00
Eric Anholt
ba16275b9f No use for this AMD64 special-case "return NULL;" in probe now that we don't
do fake "generic" support.
2005-02-14 07:16:25 +00:00
Max Laier
0afa9c9e2c Adjust TX threshold on every TX underrun. Some supported cards (8139-based)
can retransmit on TX underrun and set TOK in addition to TUND.  Also add a
check to prevent overflow of the addressable threshold.

This fixes some reports of rl(4) slowness, believed to be related to ALTQ
before.

PR:		kern/61448
Submitted by:	Tim Draegen-Gilman <timNOeudaemonSPAMnet> (with changes)
MFC after:	1 week
2005-02-11 01:05:52 +00:00
Bjoern A. Zeeb
9eed64cad9 Cleanup debugging code and put it under bootverbose
(includes minor style polishing).

Approved by:	rwatson (mentor)
2005-01-29 19:26:53 +00:00
Warner Losh
5fb99dcabe Bring in support for SUGOI LAN GIGA NIC made by System TALKS, Inc from
a RealTek 8169SB.

PR: 74262
Submitted by: Yoshikazu GOTO-san

# Submitter notes that he's unsure of the revision string for 8169SB
2005-01-22 22:40:53 +00:00
Ruslan Ermilov
37c3875846 Reimplement the fix in rev. 1.126.
OK'ed by:	phk
2005-01-10 09:56:47 +00:00
Sam Leffler
b03eb9a092 correct direction for bus_dma sync of rx buffer
Submitted by:	Tai-hwa Liang
2005-01-09 19:57:55 +00:00
Poul-Henning Kamp
90711964ef Revert local experiment which leaked into commit. 2005-01-07 23:54:16 +00:00
Poul-Henning Kamp
aeaf0a3a68 Fix compilation of DEVICE_POLLING code. 2005-01-07 23:52:41 +00:00
Scott Long
45a0fd86e1 Fix typos from previous commit. 2005-01-07 05:01:24 +00:00
Warner Losh
60727d8b86 /* -> /*- for license, minor formatting changes 2005-01-07 02:29:27 +00:00
Poul-Henning Kamp
72f0eb9104 We no longer recurse the mutex. 2005-01-07 00:02:11 +00:00
Poul-Henning Kamp
8397f22c34 If we get an interrupt and the interface is down, return before we
grab the lock.  This should help a tiny bit on machines where unused
if_sis interfaces share IRQ.
2005-01-07 00:01:43 +00:00
Poul-Henning Kamp
41166e0488 Don't tweak DSP on the ..16 chips. 2005-01-06 23:56:13 +00:00
Poul-Henning Kamp
4ce7885f87 Fix for an issue with excessive collisions in half duplex mode. 2005-01-06 23:54:55 +00:00
Poul-Henning Kamp
bce3bc624c Nail the short cable problem the exact way National says it should be. 2005-01-06 23:49:26 +00:00
Poul-Henning Kamp
0608b4a20c Simplify and fix bugs in rx/tx ring cleanup. 2005-01-06 23:36:43 +00:00
Poul-Henning Kamp
7302042943 Rewrite the rx/tx ring initialization to use pointers instead of arrays. 2005-01-06 23:31:41 +00:00
Poul-Henning Kamp
1bad258b05 Eliminate a bunch of unnecessary prototypes. 2005-01-06 23:26:13 +00:00
Poul-Henning Kamp
878f347274 Move the module related stuff to the bottom of the file. This will
allow us to save prototypes.
2005-01-06 23:22:38 +00:00
Poul-Henning Kamp
951365068b Make sure to clear any pending interrupts when we stop the interface. 2005-01-06 23:18:44 +00:00
Poul-Henning Kamp
c884a1dc23 Close a theoretical race: By the time the watchdog comes around
the interface may have been stopped, so we should not restart it.
2005-01-06 23:13:50 +00:00
Poul-Henning Kamp
9be9637246 Align if else if properly 2005-01-05 22:28:24 +00:00
Poul-Henning Kamp
93368d1eb2 Style: new-speak functions, remove pointless "return". 2005-01-05 22:23:03 +00:00
Poul-Henning Kamp
1e079a9113 Make sis_initl() take a typed argument.
Expect caller to lock before calling sis_stop()
Various style stuff.
2005-01-05 10:26:12 +00:00
Poul-Henning Kamp
a55fd2ad97 Add locked/unlocked variants of sis_init() 2005-01-05 10:11:37 +00:00
Poul-Henning Kamp
93e6be6cd7 Make a locked and unlocked variant of sis_start() 2005-01-05 10:04:45 +00:00
Poul-Henning Kamp
93a8f35688 Don't declare variables "register", the compiler ought to know what to do. 2005-01-05 09:02:05 +00:00
Poul-Henning Kamp
dc010b7380 Instead of keeping track of the index into the receive ring use the already
implemented "sis_nextdesc" pointer to keep a pointer instead.
2005-01-04 22:39:35 +00:00
Poul-Henning Kamp
32a300364d Forget about the sis_list_data and sis_ring_data structures and embedd
their fields directly in the softc structure.

This is a no-op which shortens most of the affected source lines
by N * 10 characters.
2005-01-04 22:25:58 +00:00
Poul-Henning Kamp
42eb5bb725 Prototype busdma callback using the typedef. 2005-01-04 22:14:18 +00:00
Robert Watson
12412ce921 Add PCI and device ID's to if_xl to support:
3C920B-EMB-WNM Integrated Fast Ethernet Controller

Submitter reports that the card appears to autonegotiate properly, and
operate well with high levels of NFS traffic.

PR:		75253
Submitted by:	"Oleg V. Nauman" <oleg at reis dot zp dot ua>
MFC after:	2 weeks
2005-01-03 19:22:37 +00:00
Eric Anholt
124cfec04a [1] Remove the generic bridge support from those drivers that had it. The
generic bridge support was biting us more than it helped, whenever a new chipset
came out from a vendor and misprogramming it caused strange hangs or corruption.
[2] Add a large number of PCI IDs based on what the linux drivers support.
Note that the new PCI IDs haven't been tested, they're just *likely* to work.
In particular the VIA AGP 8x chipsets are concerning, due to lack of testing,
possible issues (kern/69953), and not having a nice "does this bridge say it
would do 8x" function.  However, this shouldn't make the situation worse, since
these chips would have probed in the past anyway.
2004-12-30 07:18:58 +00:00
Max Laier
b9c5f41258 Enable sk(4) for ATLQ.
Thoroughly tested by:	Ender <ender NO tog SPAM net>
MFC after:		4 weeks
2004-12-24 14:13:38 +00:00
Bjoern A. Zeeb
969e69711e Enable jumbo frames on Yukon variants of sk(4).
In contrast to OpenBSD we enable jumbo frame support
depending on MTU setting (like done for xmac).

Approved by:	pjd (mentor)
Obtained from:	OpenBSD if_sk.c r1.52 (YU_SMR_MFL_JUMBO flag)
Tested by:	Heinz Knocke <knockefreebsd at o2 dot pl>
MFC after:	5 days
2004-12-20 10:07:12 +00:00
Alan Cox
370abcb3e5 Update the Tigon 1 and 2 driver to use the sf_buf API for implementing
zero-copy receive of jumbo frames.  This eliminates the need for the
jumbo frame allocator implemented in kern/uipc_jumbo.c and sys/jumbo.h.
Remove it.

Note: Zero-copy receive of jumbo frames did not work without these changes;
I believe there was insufficient locking on the jumbo vm object.

Tested by: ken@
Discussed with: gallatin@
2004-12-06 00:43:40 +00:00
Matthew N. Dodd
1f73cc7d3d - Simplify pcn_probe() by moving vendor/device matching code to pcn_match().
- Avoid LOR in pcn_probe() by removing useless mutex stuff.
2004-12-03 18:35:00 +00:00
Matthew N. Dodd
219cfd405b - Move chip ID code into separate function.
- Initialize sc->pcn_type during ATTACH as softc contents may not surivive
  from PROBE.
- Print out chip-id to assist with ongoing pcn(4) debugging efforts.
2004-12-03 18:21:30 +00:00
Matthew N. Dodd
dd3e3dfb6f Additional register definitions.
Obtained from:	 NetBSD
2004-12-03 16:45:11 +00:00
Christian Brueffer
b0103a491a Correct URL of the programming manual. 2004-11-17 23:36:11 +00:00
Christian Brueffer
b0452ccacc Add missing /* DEVICE_POLLING */ 2004-11-17 23:33:56 +00:00
John-Mark Gurney
39189ef797 only clear the IFF_OACTIVE flag when we have a chance of being able to
queue a packet to the hardware... instead of when the hardware queue is
empty..

don't initalize cur_tx now that it doesn't need to be...

Pointed out by:	bde
2004-11-17 21:35:22 +00:00
John-Mark Gurney
c42f170477 move the lock after the NULL check so we don't have a hard(er) to diagnose
panic...

Pointed out by:	Bjoern A. Zeeb
2004-11-15 22:24:32 +00:00
John-Mark Gurney
069114c230 fix the missing lock in sk_jfree (verified w/ an assert)
also fix up handling and proding of the tx, _OACTIVE is now handled
better...

Submitted by:	Peter Edwards (sk_jfree)
Obtained from:	OpenBSD and/or NetBSD (tx prod)
2004-11-15 19:37:21 +00:00
David E. O'Brien
acebe0cb2c Commit more debugging output. This is a little bit of using a large hammer,
but sk(4) is so prevalent on AMD64 motherboards we need to reduce the number
of round trips in the mailing lists trying to get sufficient information to
make sure we've got a handle on all the problems and are working towards
making sk(4) solid.

Submitted by:	bz
2004-11-14 20:17:01 +00:00
Bjoern A. Zeeb
70502bea85 Set ramsize depending on a value from eprom instead of using
hardcoded 128k for Yukon devices. 88E8001 only has 64k of on-chip RAM[1].

[1] http://www.marvell.com/products/pcconn/yukon/Yukon_88E8001_10_073103_final.pdf

Tested by:	amd64, current
Approved by:	rwatson (mentor)
MFC after:	1 week
2004-11-13 20:21:57 +00:00
Christian Brueffer
a62ba928f7 Add altq support.
Patch by mlaier.

Approved by:	mlaier
MFC after:	2 weeks
2004-11-12 18:12:04 +00:00
Christian Brueffer
1f606ecd84 Add device polling support
Original patch by me, improvements by ru

Happy birthday to:	BSDforen.de!
Approved by:		ru
MFC after:		2 weeks
2004-11-10 23:04:39 +00:00
Poul-Henning Kamp
6d6b7a18aa Hide link up/down/media printfs behind bootverbose 2004-11-08 19:21:57 +00:00
Max Laier
f4444d4a61 Another missing ! in front of IFQ_DRV_IS_EMPTY, this time in an even more
sensitive, but less excercised location (the watchdog). While here use the
*_start_locked function directly to avoid drop, grab, drop lock.

I have to be very careful with future ALTQ patches!

Found & reviewed by:	rwatson
MFC after:		3 days
2004-11-08 16:16:04 +00:00
David E. O'Brien
220df35f05 * Correct an off-by-one reading vpd ro data.
* Announce some more fields from ro area for better debugging of broken
  sk(4)s on various boards.

Submitted by:	Bjoern A. Zeeb <bzeeb-lists@lists.zabbadoz.net>
2004-11-01 17:21:04 +00:00
Bruce M Simpson
d6dd4af4ac Forcibly disable interrupts, if we find ourselves servicing one when
the device is suspended or shutting down. This will need to be rethought
slightly if we implement suspend/resume support within vr(4).
This appears to fix the vr_shutdown() panic on SMP machines.

My theory here is there's a race somewhere during vr_detach() with
vr_intr() in the SMP case which was sometimes being triggered,
although quite why this was happening is unclear (vr_stop() also
explicitly disables interrupts by writing to the IMR register).

MFC-to-RELENG_5* candidate.

PR:		kern/62889
Tested by:	seb at struchtrup dot com
MFC after:	10 days
2004-10-27 19:02:23 +00:00
Bruce M Simpson
4cc36d8a8b Workaround for a recursive acquisition of the driver mutex during device
detach; triggered by ether_ifdetach() -> if_delmulti() -> vr_ioctl().
MFC candidate.

PR:		kern/62889
MFC after:	3 days
2004-10-26 19:49:45 +00:00
Alan Cox
2a444f81a0 Use VM_ALLOC_NOBUSY to eliminate an unneeded vm_page_wakeup() call and the
synchronization that one entails.
2004-10-24 07:31:07 +00:00
Alan Cox
91dd969325 Avoid repeated acquisition and release of the vm object lock inside of
two loops in agp_generic_bind_memory().  As an intended side-effect, all
of the calls to vm_page_wakeup() are now performed with the containing
vm object lock held.
2004-10-24 07:12:13 +00:00
Bruce M Simpson
9a3b0b8cdf Really really fix typo this time. 2004-10-19 20:02:07 +00:00
Bruce M Simpson
80f7b487a1 Fix typo sc -> dev. 2004-10-19 16:47:53 +00:00
Bruce M Simpson
33bab57d1e Detach the Rhine completely on shutdown, rather than merely stopping it
as the original logic did. This fixes a race with vr_intr() which was
masked on UP systems and manifested on SMP systems.

PR:		kern/62889
MFC after:	1 day
2004-10-19 15:30:47 +00:00
John-Mark Gurney
7a099cc936 fix (for me) the problems where if_de gets really slow after time
(usually taking 20 seconds to transmit a packet).. no longer fall back
to only transmitting one packet (instead of the entire queue) after we
have processed the entire send queue...  I have no idea why we didn't
start seeing this problem ~6 years ago when this code was introduced...
2004-10-18 23:06:12 +00:00
Max Laier
22d0ab2ef8 Fix sis, bfe and ndis in the same way dc was fixed:
Do not tell the hardware to send when there were no packets enqueued.

Found and reviewed by:	green
MFC after:		1 days
2004-10-08 16:14:42 +00:00
Eric Anholt
161cb1a5c6 Add PCI ID for VIA K8T800Pro chipset. Tested with agptest and X with DRI
enabled, but not 3D.
2004-10-05 04:40:32 +00:00
Maxime Henrion
8c7ff1f331 Read the MAC address in the EEPROM in the correct byte order. This
is a no-op on little endian architectures, but fixes getting the MAC
address for some dc(4) cards on big endian architectures.

This is a RELENG_5 candidate.

Tested by:	gallatin (powerpc), marius (sparc64)
First version of the patch written by:	gallatin
2004-10-01 15:23:31 +00:00
Brian Feldman
cbaf877f7d Add ALTQ support for dc(4), based upon a mostly-working patch from mlaier. 2004-10-01 07:04:09 +00:00
Brian Feldman
3d57a2e58e Conditionalize IFF_NEEDSGIANT, like everything else here, on IS_MPSAFE.
The driver doesn't look any less safe without Giant than with, and works
with IS_MPSAFE set to 1 here, so others should probably test it as such.
2004-10-01 07:01:38 +00:00
John-Mark Gurney
22a11c9657 fix jumbo frames as much as they can be fixed for re. We now cap the MTU
to 7422 since it appears that the 8169S can't transmit anything larger..
The 8169S can receive full jumbo frames, but we don't have an mru to let
the upper layers know this...

add fixup so that this driver should work on alignment constrained platforms
(!i386 && !amd64)

MFC after:	5 days
2004-09-28 18:22:24 +00:00
Johan Karlsson
1868ee666e style: Move the { back to the else line to match the }.
Discussed with:		glebius
X-MFC after:		5.3-Release
2004-09-26 09:01:02 +00:00
Stefan Farfeleder
e7b80a8e24 Prefer C99's __func__ over GCC's __FUNCTION__. 2004-09-22 17:16:04 +00:00
John-Mark Gurney
81d4eca1ef fix misspelling of TX...
Submitted by:	Johan Karlsson
MFC after:	3 days
2004-09-19 18:16:28 +00:00
John-Mark Gurney
efefe913d2 comment requirement that rx/tx descriptor counts must be equal due to
shared code...
define rx descriptor count in terms of tx
align defines

MFC after:	3 days
2004-09-19 17:45:56 +00:00
Stefan Eßer
c7754014fa Fix oversight reported by Norikatsu Shigemura for the "sym" driver
(which was derived from the "ncr" driver) and add a MODULE_DEPEND
on "cam".

MT5 candidate, IMHO.
MFC after:	1 week
2004-09-10 19:35:44 +00:00
Gleb Smirnoff
9fdd451496 Do not call xl_init_locked() unconditionally when we are bringed UP. Call
it only if we weren't UP before. In some cases xl_init causes long media
re-negotiation, and ppp(8) fails to open PPPoE connection because it sets
IFF_UP every time before opening PPPoE connection.

PR:		kern/69133
Patch by:	mdodd
Approved by:	wpaul, julian (mentor)
MFC after:	1 week
2004-09-09 12:16:29 +00:00
Christian Brueffer
0b6470435c Fix a couple of typos in comments
MFC after:	3 days
2004-09-06 13:42:38 +00:00
Robert Watson
2a567ae5ec Tag a last set of PCI network interfaces as IFF_NEEDSGIANT until they
are either locked down or demonstrated MPSAFE.
2004-08-28 15:10:35 +00:00
MIHIRA Sanpei Yoshiro
ea263191fd Add support Corega CG-LAPCIGT Gigabit Ethernet(8169S)
PR:		[FreeBSD-users-jp 80667]
Submitted by:	FUJIMOTO Kou <fujimoto@j.dendai.ac.jp>
MFC after:	1 week
2004-08-28 10:59:02 +00:00
Robert Watson
5162f7de6f if_dc includes locking, but that locking is disabled by a #ifdef
by default.  As such, mark if_dc as IFF_NEEDSGIANT until such
time as appropriate locking review and testing can take place,
and the locking can be enabled by default.

RELENG_5 candidate.
2004-08-25 03:37:25 +00:00
Eric Anholt
7eed267f0c Add support for Intel E7205 AGP.
PR:		kern/69858
Submitted by:	Jacobo Arvelo <unix4all at gulic dot org>
2004-08-22 03:55:04 +00:00
Eric Anholt
8c9610c9fe Fix aperture size detection on some ALi chipsets by only using the lowest 4 bits
to check aperture size, avoiding hangs.  Maintain the rest of the bits when
setting/unsetting ATTBASE.  This essentially matches Linux's AGP driver as well.

PR:		kern/70037
Submitted by:	Mark Tinguely <tinguely at casselton dot net>
Obtained from:	NetBSD
2004-08-21 06:24:21 +00:00
Eric Anholt
74674ea7f2 Apply some stylistic changes based off of kern/70037 (content changes to
follow).
2004-08-21 06:18:11 +00:00
John-Mark Gurney
c3e8b950c7 fix LOR's in sk. Original patch from dwhite. This moves the memory
allocation earlier on in sk_attach so we don't have to lock until a bit
later.

PR:		69752
2004-08-20 06:22:04 +00:00
John-Mark Gurney
e7290ad28f put function's name at begining of column... 2004-08-20 05:09:31 +00:00
John-Mark Gurney
50a6c77a02 add pci id for Belkin F5D5005 Gigabit ethernet card. 2004-08-20 05:06:10 +00:00
David E. O'Brien
f49f2ca64e Unconditionally support the AMD64 GART HW. 2004-08-19 20:58:24 +00:00
David E. O'Brien
3c749e3fb1 AMD64 on-CPU GART support.
This also applies to AMD64 HW running 'i386' OS.

Submitted by:	Jung-uk Kim <jkim@niksun.com>
Integration by:	obrien
2004-08-16 12:25:48 +00:00
David E. O'Brien
15720d822e style.9. 2004-08-16 12:23:53 +00:00
Marius Strobl
b7b6c9e6fa - Make OF_getetheraddr() honour the "local-mac-address?" system config
variable. If set to "true" OF_getetheraddr() will now return the unique
  MAC address stored in the "local-mac-address" property of the device's
  OFW node if present and the host address/system default MAC address if
  the node doesn't doesn't have such a property. If set to "false" the
  host address will be returned for all devices like before this change.
  This brings the behaviour of device drivers for NICs with OFW support/
  FCode, i.e. dc(4) for on-board DM9102A on Sun machines, gem(4) and hme(4),
  regarding "local-mac-address?" in line with NetBSD and Solaris.
  The man pages of the respective drivers will be updated separately to
  reflect this change.
- Remove OF_getetheraddr2() which was used as a stopgap in dc(4). Its
  functionality is now part of OF_getetheraddr().
2004-08-14 21:43:37 +00:00
Robert Watson
09e54b95d3 Since the if_de driver doesn't contain locking, mark it as
IFF_NEEDSGIANT so that ifp->if_start won't be called without Giant
when running debug.mpsafenet=1.
2004-08-13 22:48:05 +00:00
Scott Long
8ab79fb0e1 Revert rev 1.93 and replace it by grabbing the vr lock before calling
mii_pollstat().  The previous was causing the vr lock to recurse.

PR:	kern/70189
2004-08-11 04:30:49 +00:00
Eric Anholt
b6e05739c5 Minimal fix to prevent crashes when an AGP v2 card is used with the new v3 VIA
chipsets, based on Linux's via-agp.c.  On boot, the system selects which AGP
version to use based on the inserted card.  If v2 was chosen, the chipset
needs to be programmed with the v2 registers still.  Also included in kern/69953
are changes to make the programming of the v3 registers match linux, but that
will be left out until the need to do so is confirmed (want specs or a tester).

PR:		kern/69953
Submitted by:	Oleg Sharoiko <os@rsu.ru>
Tested by:	Oleg Sharoiko <os@rsu.ru>, Geoff Speicher <geoff@speicher.org>
		(full version from PR)
2004-08-09 21:01:49 +00:00
Brian Feldman
6eb3cb4a13 Fix rl(4)'s lock behavior upon deinitialization. I would get a panic
when kldunloading due to its private locking being acquired recursively.
2004-08-09 20:22:17 +00:00
Robert Watson
0dab4d146c Acquire vr lock before entering vr_setcfg() in vr_miibus_statchg(),
since vr_setcfg() expects it.

Reported by:	Mike Bristow <mike@urgle.com>
2004-08-07 19:40:19 +00:00
Peter Pentchev
3f35d5150b Do not attempt to clean up data that has not been initialized yet.
This fixes two kernel panics on boot when the xl driver fails to
allocate bus/port/memory resources.

Reviewed by:	silence on -net
2004-08-06 09:08:33 +00:00
Max Laier
e3dbc2ddcd Unbreak DEVICE_POLLING build / LINT. Sorry!
Submitted by:	roam
2004-08-02 10:08:28 +00:00
Max Laier
154b8df2ed Second part of ALTQ driver modifications, covering:
an(4), ath(4), hme(4), ndis(4), vr(4) and wi(4)

Please help testing: http://people.freebsd.org/~mlaier/ALTQ_driver/

Tested by:	Vaidas Damosevicius (an, ath, wi)
		Roman Divacky (vr)
Submitted by:	yongari (hme)
2004-08-01 23:58:04 +00:00
Marcel Moolenaar
32240d082c Update for the KDB framework:
o  Call kdb_enter() instead of Debugger().
2004-07-10 21:47:53 +00:00
Bruce M Simpson
69599f22f0 Further improve locking in xl(4):
- Avoid an additional lock acquire/release when leaving xl_intr(), by
   changing xl_start*() to xl_start*_locked(), and calling the appropriate
   routine by chip revision (as the DMA descriptors are different).

 - Simplify the appropriate routines now that they are called with the
   lock held.

This should save a significant amount of CPU cycles spent on servicing
each interrupt for both UP and SMP whilst remaining MPSAFE.

Tested by:	rwatson
2004-07-09 02:28:23 +00:00
Bruce M Simpson
63dff30ee7 Apply the long-overdue hatchet of style(9) death to this file. 2004-07-09 02:19:07 +00:00
Bruce M Simpson
d911052d10 Further locking improvements for vr(4):
- Add *_locked() entry points as needed to avoid unnecessary lock thrashing.
 - Use these entry points wisely.
 - Only acquire the lock once when servicing an interrupt.
 - Check 'suspended' on interrupt to avoid racing detach.
 - Correct a mis-spelled comment.
 - Don't take the lock in vr_reset() to avoid lock thrashing in attach.
  - Comment this.

Reviewed by:	-net (silence)
2004-07-09 00:17:14 +00:00
Bruce M Simpson
ee06f01331 Add a 'suspended' flag to softc so that we can avoid races on detach. 2004-07-09 00:12:41 +00:00
Bruce M Simpson
c73a317e98 Actually turn on driver locking in xl(4). 2004-07-09 00:11:25 +00:00
Bruce M Simpson
cdeef8e7f3 Further rl(4) locking improvements:
- Avoid unnecessary re-acquisition elsewhere by adding *_locked()
   entry points as needed.
 - Correct locking for the DEVICE_POLLING case.
 - Hold the driver lock for the entire duration of interrupt servicing,
   to avoid unneeded, expensive re-acquisition; use *_locked() entry
   points as needed.

Reviewed by:	-net (silence)
2004-07-09 00:07:06 +00:00
Bruce M Simpson
b4e8c523d0 Whitespace nit 2004-07-05 22:52:01 +00:00
Bruce M Simpson
244f35108f Eliminate redundant return keywords. 2004-07-05 22:50:52 +00:00
Bruce M Simpson
140c64b1fc Whitespace pass. 2004-07-05 22:46:28 +00:00
Bruce M Simpson
03b37a461e style(9):
- Space before bracketized non-void function returns.
 - Space before condition for conditional blocks.
2004-07-05 22:42:07 +00:00
Bruce M Simpson
fb7411a6c9 Eliminate redundant return keywords. 2004-07-05 22:36:48 +00:00