vm_page_queue(), added in r333256, generalizes vm_pageout_page_queued(),
so use it instead. No functional change intended.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D15402
For a fairly rare case of a client doing an ExchangeID after a hard reboot,
the old confirmed clientid still exists, but some clients use a new
co_verifier. For this case, the server was not freeing up the sessions on
the old confirmed clientid.
This patch fixes this case. It also adds two LIST_INIT() macros, which are
actually no-ops, since the structure is malloc()d with M_ZERO so the pointer
is already set to NULL.
It should have minimal impact, since the only way I could exercise this
code path was by doing a hard power cycle (pulling the plus) on a machine
running Linux with a NFSv4.1 mount on the server.
Originally spotted during testing of the ESXi 6.5 client.
Tested by: andreas.nagy@frequentis.com
MFC after: 2 months
When an NFSv4.1 session is busy due to a callback being in progress,
nfsrv_freesession() should return NFSERR_BACKCHANBUSY instead of NFS_OK.
The only effect this has is that the DestroySession operation will report
the failure for this case and this probably has little or no effect on a
client. Spotted by inspection and no failures related to this have been
reported.
MFC after: 2 months
- Create getblkx(9) variant of getblk(9) which can return error.
- Add GB_NOSPARSE flag for getblk()/getblkx() which requests that BMAP
was performed before the buffer is created, and EJUSTRETURN returned
in case the requested block does not exist.
- Make ffs_read() use GB_NOSPARSE to avoid instantiating buffer (and
allocating the pages for it), copying from zero_region instead.
The end result is less page allocations and buffer recycling when a
hole is read, which is important for some benchmarks.
Requested and reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D14917
It appears that domain information is set correctly independent
of whether or not NUMA is defined. However, there is no memory
backing secondary domains leading to allocation failure.
Reported by: pho@, np@
Approved by: sbruno@
unwind_frame() may be instrumented by FBT, leading to recursion into
dtrace_probe(). Manually inline unwind_frame() as we do with stack
unwinding code for other architectures.
Submitted by: Domagoj Stolfa
Reviewed by: manu
MFC after: 1 week
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D15359
Don't enable regulator on attach but dealt with them on power_up/power_off
Only set the voltage for the signaling regulator since I don't have boards
that can change the supply voltage.
Enable 1.8v signaling voltage.
Only do a reset of the controller at attach and init it at power_up.
We use to enable some interrupts in reset, only enable the interrupts
we are interested in when doing a request.
While here remove the regulators handling in power_on as it is very wrong
and will be dealt with in another commit.
Tested on: A31, A64
is executed on the right stack already. No copy from the entry stack
to the kstack must be performed for vm86 bios call code to function.
To access the pcb flags on kernel entry, unconditionally switch to
kernel address space if vm86 mode is detected.
This fixes very early vm86 bios calls, typically done when boot is
performed by boot2 without loader, and kernel falls back to BIOS calls
to get SMAP.
Reported by: bde
Sponsored by: The FreeBSD Foundation
PCB_VM86CALL pcb flag not set should be treated same as return to
userspace.
Most important, the address space must be switched. This fixes
usermode vm86 operations after the 4/4 split.
Sponsored by: The FreeBSD Foundation
exception code is copied to the trampoline.
The correct value is then copied to trampoline automatically, so
tramp_idleptd_reloced can be eliminated.
This will allow to use the same exception entry code to handle traps
from vm86 bios calls on early boot stage, as after the trampoline is
configured.
Sponsored by: The FreeBSD Foundation
Record common_tssd, the descriptor to be written in GDT to point to
the common TSS, before LTR is executed. The LTR instruction sets the
loaded descriptor type to 386 TSS busy, which traps on reloads.
Sponsored by: The FreeBSD Foundation
On non-trivial SMP systems the contention on the pmc_owner mutex leads
to a substantial number of samples captured being from the pmc process
itself. This change a) makes buffers larger to avoid contention on the
global list b) makes the working sample buffer per cpu.
Run pmcstat in the background (default event rate of 64k):
pmcstat -S UNHALTED_CORE_CYCLES -O /dev/null sleep 600 &
Before:
make -j96 buildkernel -s >&/dev/null 3336.68s user 24684.10s system 7442% cpu 6:16.50 total
After:
make -j96 buildkernel -s >&/dev/null 2697.82s user 1347.35s system 6058% cpu 1:06.77 total
For more realistic overhead measurement set the sample rate for ~2khz
on a 2.1Ghz processor:
pmcstat -n 1050000 -S UNHALTED_CORE_CYCLES -O /dev/null sleep 6000 &
Collecting 10 samples of `make -j96 buildkernel` from each:
x before
+ after
real time:
N Min Max Median Avg Stddev
x 10 76.4 127.62 84.845 88.577 15.100031
+ 10 59.71 60.79 60.135 60.179 0.29957192
Difference at 95.0% confidence
-28.398 +/- 10.0344
-32.0602% +/- 7.69825%
(Student's t, pooled s = 10.6794)
system time:
N Min Max Median Avg Stddev
x 10 2277.96 6948.53 2949.47 3341.492 1385.2677
+ 10 1038.7 1081.06 1070.555 1064.017 15.85404
Difference at 95.0% confidence
-2277.47 +/- 920.425
-68.1574% +/- 8.77623%
(Student's t, pooled s = 979.596)
x no pmc
+ pmc running
real time:
HEAD:
N Min Max Median Avg Stddev
x 10 58.38 59.15 58.86 58.847 0.22504567
+ 10 76.4 127.62 84.845 88.577 15.100031
Difference at 95.0% confidence
29.73 +/- 10.0335
50.5208% +/- 17.0525%
(Student's t, pooled s = 10.6785)
patched:
N Min Max Median Avg Stddev
x 10 58.38 59.15 58.86 58.847 0.22504567
+ 10 59.71 60.79 60.135 60.179 0.29957192
Difference at 95.0% confidence
1.332 +/- 0.248939
2.2635% +/- 0.426506%
(Student's t, pooled s = 0.264942)
system time:
HEAD:
N Min Max Median Avg Stddev
x 10 1010.15 1073.31 1025.465 1031.524 18.135705
+ 10 2277.96 6948.53 2949.47 3341.492 1385.2677
Difference at 95.0% confidence
2309.97 +/- 920.443
223.937% +/- 89.3039%
(Student's t, pooled s = 979.616)
patched:
N Min Max Median Avg Stddev
x 10 1010.15 1073.31 1025.465 1031.524 18.135705
+ 10 1038.7 1081.06 1070.555 1064.017 15.85404
Difference at 95.0% confidence
32.493 +/- 16.0042
3.15% +/- 1.5794%
(Student's t, pooled s = 17.0331)
Reviewed by: jeff@
Approved by: sbruno@
Differential Revision: https://reviews.freebsd.org/D15155
The Linux client now uses the TestStateID operation, so this patch adds
support for it to the NFSv4.1 server. The FreeBSD client never uses this
operation, so it should not be affected.
MFC after: 2 months
r333175 updated the join_group functions, but not the leave_group ones.
Reviewed by: sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15393
Part 3 of many ...
The VPC framework relies heavily on cloning pseudo interfaces
(vmnics, vpc switch, vcpswitch port, hostif, vxlan if, etc).
This pulls in that piece. Some ancillary changes get pulled
in as a side effect.
Reviewed by: shurd@
Approved by: sbruno@
Sponsored by: Joyent, Inc.
Differential Revision: https://reviews.freebsd.org/D15347
This hardware isn't totally ancient, about equal to a mxge(4) or mlx4en(4),
but the company was sold to Exar which then promptly exited the Ethernet
business so the card was commercially available for under 2 years. On deep
search, the only usage of these cards I found was by the importing of the
driver. There are code quality issues identified by Brooks and Hiren and
no visible use nor maintainership that warrant removal from FreeBSD 12.0.
Submitted by: kbowling
Reviewed by: gnn brooks
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15363
It is guaranteed that if_ipsec(4) interface is used only for tunnel
mode IPsec, i.e. decrypted and decapsultaed packet has its own IP header.
Thus we can consider it as new packet and clear the protocols flags.
This allows ICMP/ICMPv6 properly handle errors that may cause this packet.
PR: 228108
MFC after: 1 week
sys/dev/ocs/ocs_os.c:
In ocs_thread_create(), use sizeof(*thread) (instead of
sizeof(thread)) as the size argument to memset so that we clear
out the entire thread structure instead of just a few bytes of it.
Submitted by: jtl
MFC after: 3 days
LAN7800 USB 3.1 to 10/100/1000 Ethernet with PHY
LAN7801 USB 3.1 to 10/100/1000 Ethernet with RGMII interface
Also update manufacturer name for the Vendor ID. Microchip acquired
SMSC in May 2012.
Sponsored by: The FreeBSD Foundation
This aligns the section itself compared to other sections, does not change
internal alignment of fields stored inside. This may or may not come later.
The motivation is partially combating adverse effects of the adjacent cache
line prefetcher. Without the annotation part of read_mostly section was on
the line of fire.
- initialize the pcpu STAILQ in the NUMA case
- don't enqueue the callback task if there isn't sufficient work to be done
Reported by: pho@
Approved by: sbruno@
Current UMA internals are not suited for efficient operation in
multi-socket environments. In particular there is very common use of
MAXCPU arrays and other fields which are not always properly aligned and
are not local for target threads (apart from the first node of course).
Turns out the existing UMA_ALIGN macro can be used to mostly work around
the problem until the code get fixed. The current setting of 64 bytes
runs into trouble when adjacent cache line prefetcher gets to work.
An example 128-way benchmark doing a lot of malloc/frees has the following
instruction samples:
before:
kernel`lf_advlockasync+0x43b 32940
kernel`malloc+0xe5 42380
kernel`bzero+0x19 47798
kernel`spinlock_exit+0x26 60423
kernel`0xffffffff80 78238
0x0 136947
kernel`uma_zfree_arg+0x46 159594
kernel`uma_zalloc_arg+0x672 180556
kernel`uma_zfree_arg+0x2a 459923
kernel`uma_zalloc_arg+0x5ec 489910
after:
kernel`bzero+0xd 46115
kernel`lf_advlockasync+0x25f 46134
kernel`lf_advlockasync+0x38a 49078
kernel`fget_unlocked+0xd1 49942
kernel`lf_advlockasync+0x43b 55392
kernel`copyin+0x4a 56963
kernel`bzero+0x19 81983
kernel`spinlock_exit+0x26 91889
kernel`0xffffffff80 136357
0x0 239424
See the review for more details.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D15346
if_bridge has a lot of limitations that make it scale poorly to higher data
rates. In my projects/VPC branch I leverage the bridge interface between
layers for my high speed soft switch as well as for purposes of stacking
in general.
Reviewed by: sbruno@
Approved by: sbruno@
Differential Revision: https://reviews.freebsd.org/D15344
- Lend priority to preempted threads in epoch_wait to handle the case
in which we've had priority lent to us. Previously we borrowed the
priority of the lowest priority preempted thread. (pointed out by mjg@)
- Don't attempt allocate memory per-domain on powerpc, we don't currently
handle empty sockets (as is the case on jhibbits Talos' board).
- Handle deferred callbacks as pcpu lists and poll the lists periodically.
Currently the interval is 1/hz.
- Drop the thread lock when adaptive spinning. Holding the lock starves
other threads and can even lead to lockups.
- Keep a generation count pcpu so that we don't keep spining if a thread
has left and re-entered an epoch section.
- Actually removed the callback from the callback list so that we don't
double free. Sigh ...
Approved by: sbruno@
Make if_printf() use vlog() instead of vprintf(). This means it can no
longer return the number of characters printed, as it used to, but every
single call to if_printf() in the entire kernel ignores the return value
anyway; just return 0 so we don't have to change the prototype.
Consistently use if_printf() throughout sys/net/if.c, instead of a
mixture of if_printf() and log().
In ifa_maintain_loopback_route(), don't needlessly log an error if we
either failed to add a route because it already existed or failed to
remove one because it did not. We still return an error code, though.
MFC after: 1 week
While <sys/sysctl.h> includes <sys/queue.h> unconditionally, it is only
actually used in code which is conditional on _KERNEL. Make the #include
itself conditional as well, and fix userland code that uses <sys/queue.h>
for other purposes but relied on <sys/sysctl.h> to bring it in.
MFC after: 1 week
As of r333461 we require ifunc support to link a working amd64 kernel.
The default in-tree bootstrap linker is lld and it has the required
support, as does any modern out-of-tree binutils linker. The in-tree
GNU ld is from binutils 2.17.50 and it does not have ifunc support,
so produce an error rather than a broken kernel.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15378
Read locking is over used in the kernel to guarantee liveness. This API makes
it easy to provide livenes guarantees without atomics.
Includes epoch_test kernel module to stress test the API.
Documentation will follow initial use case.
Test case and improvements to preemption handling in response to discussion
with mjg@
Reviewed by: imp@, shurd@
Approved by: sbruno@
- Remove unused or dead store variable
- Remove unused function ctl_copyin_alloc
- Add missing curly brackets, this seems a regression in r287720
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D15383
Before this change, the VGA palette was configured to match the shell
palette (e.g. color #1 was red). There was one glitch early in boot when
the vt(4)'s VGA palette was loaded: the loader's logo would switch from
red to blue. Likewise for the "Booting..." message switching from blue
to red. That's because the loader's logo was drawed with the default VGA
palette where a few colors are swapped compared to the shell palette
(e.g. blue <-> red).
This change configures the default VGA palette during initialization and
converts input's colors from shell to VGA palette index.
There should be no visible changes, except the loader's logo which will
keep its original color.
Reviewed by: eadler
This makes it more logical:
1. It checks the requested color format
2. It fills the palette accordingly
Also vt_palette_init() is only called when needed (i.e. when the format
is `COLOR_FORMAT_RGB`).
Use LIST_FOREACH_SAFE in in6m_disconnect() since we're
deleting and freeing item from the membership list
while traversing the list.
Reviewed by: mmacy
Sponsored by: Netflix
From now on, linking amd64 kernel requires either lld or newer ld.bfd.
Reviewed by: jhb (as part of the large patch)
Discussed with: emaste
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13838
