bug that caused us to reintroduce it is believed to be fixed, and Kris
says he no longer sees problems with fifofs in highly parallel builds.
If this works out, we'll MFC it for 7.1.
MFC after: 3 months
Pointed out by: kris
process parallel checks in the same way as fsck, since fsck supports
pass numbers other than 0, 1 or 2. Without this, quotacheck would
ignore file systems with pass numbers > 2.
The -l (maxrun) option is now deprecated and can be tuned with pass
numbers in /etc/fstab if needed.
out because the rc.conf(5) variable was not enabled. Display a
message that the command wasn't run and offer suggestions on
what the user can do.
Implement a quiet prefix, which will disable some diagnostics. The
fast prefix also implies quiet. During boot we use either fast or
quiet. For shutdown we already use 'faststop'. So, this informational
message should only appear during interactive use.
An additional benefit of having a quiet prefix is that we can start
putting some of our diagnostic messages behind this knob and start
"de-cluttering" the console during boot and shutdown.
resulted in the argument to the make_dev() to be a unit number.
Correct this by supplying a minor number to make_dev(), and using
the unit number for the calculation of the slave tty name.
Reported and tested by: Peter Holm
Reviewed by: jhb
Yet another pointy hat to: kib
MFC after: 1 day
while the thread does not hold the thread lock would stop blocking for
subsequent interruptible sleeps and would always immediately fail the
sleep with EWOULDBLOCK instead (even sleeps that didn't have a timeout).
Some background:
- KSE has a facility for allowing one thread to interrupt another thread.
During this process, the target thread aborts any interruptible sleeps
much as if the target thread had a pending signal. Once the target
thread acknowledges the interrupt, normal sleep handling resumes. KSE
manages this via the TDF_INTERRUPTED flag. Specifically, it sets the
flag when it sends an interrupt to another thread and clears it when
the interrupt is acknowledged. (Note that this is purely a software
interrupt sort of thing and has no relation to hardware interrupts
or kernel interrupt threads.)
- The old code for handling the sleep timeout race handled the race
by setting the TDF_INTERRUPT flag and faking a KSE-style thread
interrupt to the thread in the process of going to sleep. It probably
should have just checked the TDF_TIMEOUT flag in sleepq_catch_signals()
instead.
- The bug was that the sleepq code would set TDF_INTERRUPT but it was
never cleared. The sleepq code couldn't safely clear it in case there
actually was a real KSE thread interrupt pending for the target thread
(in fact, the sleepq timeout actually stomped on said pending interrupt).
Thus, any future interruptible sleeps (*sleep(.. PCATCH ..) or
cv_*wait_sig()) would see the TDF_INTERRUPT flag set and immediately
fail with EWOULDBLOCK. The flag could be cleared if the thread belonged
to a KSE process and another thread posted an interrupt to the original
thread. However, in the more common case of a non-KSE process, the
thread would pretty much stop sleeping.
- Fix the bug by just setting TDF_TIMEOUT in the sleepq timeout code and
not messing with TDF_INTERRUPT and td_intrval. With yesterday's fix to
fix sleepq_switch() to check TDF_TIMEOUT, this is now sufficient.
MFC after: 3 days
during boot and shutdown. I think I'll hide it behind autoboot or
maybe take brooks@ suggestion and implement a different command
prefix for booting/shutdown purposes, but in any case it needs more
thought and attention.
Noticed by: ceri
Pointyhat to: mtm
exposing them to all consumers of ip_fw.h. These structures are
used in both ipfw(8) and ipfw(4), but not part of the user<->kernel
interface for other applications to use, rather, shared
implementation.
MFC after: 3 days
Reported by: Paul Vixie <paul at vix dot com>
being properly cancelled by a timeout. In general there is a race
between a the sleepq timeout handler firing while the thread is still
in the process of going to sleep. In 6.x with sched_lock, the race was
largely protected by sched_lock. The only place it was "exposed" and had
to be handled was while checking for any pending signals in
sleepq_catch_signals().
With the thread lock changes, the thread lock is dropped in between
sleepq_add() and sleepq_*wait*() opening up a new window for this race.
Thus, if the timeout fired while the sleeping thread was in between
sleepq_add() and sleepq_*wait*(), the thread would be marked as timed
out, but the thread would not be dequeued and sleepq_switch() would
still block the thread until it was awakened via some other means. In
the case of pause(9) where there is no other wakeup, the thread would
never be awakened.
Fix this by teaching sleepq_switch() to check if the thread has had its
sleep canceled before blocking by checking the TDF_TIMEOUT flag and
aborting the sleep and dequeueing the thread if it is set.
MFC after: 3 days
Reported by: dwhite, peter
`kn_sdata' member of the newly registered knote. The problem is that
this member is overwritten by a call to kevent(2) with the EV_ADD flag,
targetted at the same kevent/knote. For instance, a userland application
may set the pointer to NULL, leading to a panic.
A testcase was provided by the submitter.
PR: kern/118911
Submitted by: MOROHOSHI Akihiko <moro@remus.dti.ne.jp>
MFC after: 1 day
architectures, so call it "traditional" instead.
- sched_ule is no longer buggy or experimental (according to
rev. 1.7 of sched_ule(4)), so don't call it experimental
(reported by a user on stable@).
Reviewed by: rwatson
- Remove the "thread" argument from the lockmgr() function as it is
always curthread now
- Axe lockcount() function as it is no longer used
- Axe LOCKMGR_ASSERT() as it is bogus really and no currently used.
Hopefully this will be soonly replaced by something suitable for it.
- Remove the prototype for dumplockinfo() as the function is no longer
present
Addictionally:
- Introduce a KASSERT() in lockstatus() in order to let it accept only
curthread or NULL as they should only be passed
- Do a little bit of style(9) cleanup on lockmgr.h
KPI results heavilly broken by this change, so manpages and
FreeBSD_version will be modified accordingly by further commits.
Tested by: matteo
doesn't overflow in arc.c in this check:
if (kmem_used() > (kmem_size() * 4) / 5)
return (1);
With this bug ZFS almost doesn't cache.
Only 32bit machines are affected that have vm.kmem_size set to values >=1GB.
Reported by: David Taylor <davidt@yadt.co.uk>
Introduce a new privilege allowing to set certain IP header options
(hop-by-hop, routing headers).
Leave a few comments to be addressed later.
Reviewed by: rwatson (older version, before addressing his comments)
- Improve error handling for load operations.
- Fix a memory corruption bug when using certain linux management apps.
- Allocate all commands up front to avoid OOM deadlocks later on.
tx start threshold ..." Looking around on the mailing lists, and even having
one of these cards I agree the messages should be documented.
Bump doc date.
PR: 88477
while in principle a good idea, opened us up to a race inherrent to
the syncache's direct insertion of incoming TCP connections into the
"completed connection" listen queue, as it transpires that the socket
is inserted before the inpcb is fully filled in by syncache_expand().
The bug manifested with the occasional returning of 0.0.0.0:0 in the
address returned by the accept() system call, which occurred if accept
managed to execute tcp_usr_accept() before syncache_expand() had copied
the endpoint addresses into inpcb connection state.
Re-add tcbinfo locking around the address copyout, which has the effect
of delaying the copy until syncache_expand() has finished running, as
it is run while the tcbinfo lock is held. This is undesirable in that
it increases contention on tcbinfo further, but a more significant
change will be required to how the syncache inserts new sockets in
order to fix this and keep more granular locking here. In particular,
either more state needs to be passed into sonewconn() so that
pru_attach() can fill in the fields *before* the socket is inserted, or
the socket needs to be inserted in the incomplete connection queue
until it is actually ready to be used.
Reported by: glebius (and kris)
Tested by: glebius
Even though I believe this is a good change, it does
have the potential to break certain clients, so it's
good to document the reasoning behind the change.
a run-queue. If the priority is numerically raised only change lowpri
if we're certain it will be correct. Some slop is allowed however
previously we could erroneously raise lowpri for an idle cpu that a
thread had recently run on which lead to errors in load balancing
decisions.
