Commit Graph

129 Commits

Author SHA1 Message Date
Mateusz Guzik
790cd2071a ral: clean up empty lines in .c and .h files 2020-09-01 21:56:10 +00:00
Hans Petter Selasky
b65f813c1a Widen EPOCH(9) usage in PCI WLAN drivers.
Make sure all occurrences of ieee80211_input_xxx() in sys/dev are
covered by a network epoch section. Do not depend on the interrupt
handler nor any taskqueues being in a network epoch section.

This patch should unbreak the PCI WLAN drivers after r357004.

Pointy hat:	glebius@
Sponsored by:	Mellanox Technologies
2020-01-30 10:28:01 +00:00
Michael Zhilin
cfd474794f [Bug 240473] add support of Ralink RT5390R Wireless Card
This commit adds PCI ID of Ralink RT5390R into ids table of driver ral.
Tests show stability of card during day. Network speed is reasonable (
around several megabytes per second).

PR:	https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=240473
Reported by:	zetrotrack000@gmail.com
Reviewed by:	ray
Approved by:	ray
MFC after:	5 days
Differential Revision:  https://reviews.freebsd.org/D21604
2019-09-12 18:37:26 +00:00
Pedro F. Giffuni
26d9565dfc ral(4): Use unsigned to avoid undefined behavior.
Found by NetBSD's kUBSan

Obtained from:	NetBSD (github 5b153f1)
2019-09-09 03:31:46 +00:00
Kyle Evans
82bac68cdc ral: rt2860: fix wcid2ni access/size issue
RT2860_WCID_MAX is supposed to describe the max STA index for wcid2ni, and
was instead being used as the size -- off-by-one.

rt2860_drain_stats_fifo was range-checking wcid only after accessing
out-of-bounds potentially.

Submitted by:	Augustin Cavalier <waddlesplash@gmail.com> (basically)
Obtained from:	Haiku (58d16d9fe2d5a209cf22823359a8407d138e1a87)
Differential Revision:	3 days
2019-08-06 20:21:57 +00:00
Andriy Voskoboinyk
786ac7035f Fix ieee80211_radiotap(9) usage in wireless drivers:
- Alignment issues:
 * Add missing __packed attributes + padding across all drivers; in
most places there was an assumption that padding will be always
minimally suitable; in few places - e.g., in urtw(4) / rtwn(4) -
padding was just missing.
 * Add __aligned(8) attribute for all Rx radiotap headers since they can
contain 64-bit TSF timestamp; it cannot appear in Tx radiotap headers, so
just drop the attribute here. Refresh ieee80211_radiotap(9) man page
accordingly.

- Since net80211 automatically updates channel frequency / flags in
ieee80211_radiotap_chan_change() drop duplicate setup for these fields
in drivers.

Tested with Netgear WG111 v3 (urtw(4)), STA mode.

MFC after:	2 weeks
2019-03-11 01:27:01 +00:00
Andriy Voskoboinyk
b84b36380e Remove 2GHz channel list copies from wireless drivers.
Wrap ieee80211_add_channel_list_2ghz into another function
which supplies default (1-14) channel list to it and drop
its copies from drivers.

Checked with RTL8188EE, country US / JP / KR / UA.

MFC after:	2 weeks
2019-01-26 17:00:55 +00:00
Warner Losh
b28589287b Remove bogus spaces.
Spaces aren't allowed in these strings.

Approved by: re@ (glen)
2018-09-26 19:41:00 +00:00
Warner Losh
0dc34160f3 Add PNP info to PCI attachments of cbb, cxgb, ida, iwn, ixl, ixlv,
mfi, mps, mpr, mvs, my, oce, pcn, ral, rl. This only labels existing
pci device tables, and has no probe / attach code changes.

Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
Approved by: re (glen)
2018-09-26 17:12:30 +00:00
Andriy Voskoboinyk
d1b671061b net80211: wrap protection frame allocation into ieee80211_alloc_prot()
Move copy-pasted code for RTS/CTS frame allocation into net80211.
While here, add stat / debug message for allocation failures
(copied from run(4)) + return error here in bwn(4).

Reviewed by:	adrian
Differential Revision:	https://reviews.freebsd.org/D14628
2018-03-09 11:33:56 +00:00
Pedro F. Giffuni
ac2fffa4b7 Revert r327828, r327949, r327953, r328016-r328026, r328041:
Uses of mallocarray(9).

The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.

Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.

Reported by:	wosch
PR:		225197
2018-01-21 15:42:36 +00:00
Pedro F. Giffuni
26c1d774b5 dev: make some use of mallocarray(9).
Focus on code where we are doing multiplications within malloc(9). None of
these is likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.

This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
2018-01-13 22:30:30 +00:00
Adrian Chadd
9fbe631a1a [net80211] convert all of the WME use over to a temporary copy of WME info.
This removes the direct WME info access in the ieee80211com struct and instead
provides a method of fetching the data.  Right now it's a no-op but eventually
it'll turn into a per-VAP method for drivers that support it (eg iwn, iwm,
upcoming ath10k work) as things like p2p support require this kind of behaviour.

Tested:

* ath(4), STA and AP mode

TODO:

* yes, this is slightly stack size-y, but it is an important first step
  to get drivers migrated over to a sensible WME API.  A lot of per-phy things
  need to be converted to per-VAP before P2P, 11ac firmware, etc stuff shows up.
2018-01-02 00:07:28 +00:00
Andriy Voskoboinyk
f631357540 net80211 drivers: fix rate setup for EAPOL frames, obtain Tx parameters
directly from the node.

- Use ni_txparms directly instead of calculating them manually every time
- Move M_EAPOL flag check upper; otherwise it may be skipped due to
'ucastrate' / 'mcastrate' check
- Use 'mgtrate' for control frames too (see ifconfig(8), mgtrate parameter)
- Add few more M_EAPOL checks where it was missing (zyd(4), ural(4),
urtw(4))
- Few unrelated cleanups

Tested with:
 - Intel 6205 (iwn(4)), STA mode;
 - WUSB54GC (rum(4)), HOSTAP mode + RTL8188EU (rtwn(4)), STA mode.

Reviewed by:	adrian
Differential Revision:	https://reviews.freebsd.org/D9811
2017-02-26 20:49:35 +00:00
Andriy Voskoboinyk
ce017db11c iwi, ral, zyd: fix possible use-after-free.
MFC after:	5 days
2017-02-17 23:20:22 +00:00
Andriy Voskoboinyk
f6930bec33 net80211: ieee80211_ratectl*: switch to reusable KPI
Replace various void * / int argument combinations with common structures:
- ieee80211_ratectl_tx_status for *_tx_complete();
- ieee80211_ratectl_tx_stats for *_tx_update();

While here, improve amrr_tx_update() for a bit:
1. In case, if receiver is not known (typical for Ralink USB drivers),
refresh Tx rate for all nodes on the interface.
2. There was a misuse:
- otus(4) sends non-decreasing counters (as originally intended);
- but ural(4), rum(4) and run(4) are using 'read & clear' registers
to obtain statistics for some period of time (and those 'last period'
values are used as arguments for tx_update()). If arguments are not big
enough, they are just discarded after the next call.

Fix: move counting into *_tx_update()
(now otus(4) will zero out all node counters after every tx_update() call)

Tested with:
- Intel 3945BG (wpi(4)), STA mode.
- WUSB54GC (rum(4)), STA / HOSTAP mode.
- RTL8188EU (urtwn(4)), STA mode.

Reviewed by:	adrian
Differential Revision:	https://reviews.freebsd.org/D8037
2016-10-02 20:35:55 +00:00
Andriy Voskoboinyk
d6c3624cce ral (rt2860): eliminate duplicate ieee80211_process_callback() call
(left after r287197)

MFC after:	1 week
2016-09-30 13:37:50 +00:00
Kevin Lo
5c95ab023c - Replace the magic numbers with something more readable.
- Reset DMA indexes after disabling DMA.
2016-06-08 02:37:23 +00:00
Andriy Voskoboinyk
c146f2712e ral: add missing ic_getradiocaps() assignment. 2016-05-26 17:06:43 +00:00
Andriy Voskoboinyk
0a02496f4b ral: switch to ieee80211_add_channel_list_*()
- Use device's channel list instead of default one (from
ieee80211_init_channels()).
- Add ic_getradiocaps() method.

Added channels:
- 2GHz (all): 12, 13, 14.
- 5GHz:
 * rt2661: 165
 * rt2860: 38, 46, 54, 62, 102, 110, 118, 126, 134, 151, 159, 165, 167,
169, 171, 173.

Differential Revision:	https://reviews.freebsd.org/D6182
2016-05-26 16:05:19 +00:00
Stanislav Galabov
83cb053574 Align radiotap structures in ral(4)
Currently all radiotap structures in ral(4) are packed, but are not
aligned, which causes ral based devices to crash when one does
'ifconfig wlan0 up' for a wlan interface with a ral wlandev on arches
that care about structure alignment (e.g., MIPS).

Adding an aligned attribute helps fix this problem and ral devices
can be properly brought up.

Reviewed by:	adrian
Sponsored by:	Smartcom - Bulgaria AD
2016-05-25 06:29:23 +00:00
Kevin Lo
b0f7be91aa The EEPROM is lying about antennas. Don't hardcode things based on the chip
version which is not what the vendor driver happens to do.
2016-05-17 06:04:33 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Andriy Voskoboinyk
a061fea6ee net80211 + drivers: hide size of 'bands' array behind a macro.
Auto-replace 'howmany(IEEE80211_MODE_MAX, 8)' with 'IEEE80211_MODE_BYTES'.
No functional changes.
2016-04-29 22:14:11 +00:00
Pedro F. Giffuni
057b4402bf sys/dev: extend use of the howmany() macro when available.
We have a howmany() macro in the <sys/param.h> header that is
convenient to re-use as it makes things easier to read.
2016-04-26 15:03:15 +00:00
Pedro F. Giffuni
74b8d63dcc Cleanup unnecessary semicolons from the kernel.
Found with devel/coccinelle.
2016-04-10 23:07:00 +00:00
Andriy Voskoboinyk
0046e1868f net80211 drivers: fix ieee80211_init_channels() usage
Fix out-of-bounds read (all) / write (11n capable) for drivers
that are using ieee80211_init_channels() to initialize channel list.

Tested with:
 * RTL8188EU, STA mode.
 * RTL8188CUS, STA mode.
 * WUSB54GC, HOSTAP mode.

Approved by:	adrian (mentor)
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D4818
2016-01-07 18:41:03 +00:00
Andriy Voskoboinyk
bdfff33ff6 net80211: remove hardcoded slot time durations from drivers
- Add IEEE80211_GET_SLOTTIME(ic) macro.
- Use predefined macroses to set slot time.

Approved by:	adrian (mentor)
Differential Revision:	https://reviews.freebsd.org/D4044
2015-12-13 20:48:24 +00:00
Kevin Lo
e3cf3d4428 Remove the static function declaration. 2015-10-29 04:51:27 +00:00
Kevin Lo
1c1cd920d7 - Add a missing prototype
- Fix typos
2015-10-29 04:21:34 +00:00
Adrian Chadd
4f4a7a03ce net80211 drivers: eliminate any references to sc_rxtap_len/sc_txtap_len (never used here)
Submitted by:	<s3erios@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D3776
2015-10-12 05:21:51 +00:00
Adrian Chadd
d957a93abe net80211: move ieee80211_free_node() call on error from ic_raw_xmit() to ieee80211_raw_output().
This doesn't free the mbuf upon error; the driver ic_raw_xmit method is still
doing that.

Submitted by:	<s3erios@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D3774
2015-10-12 04:55:20 +00:00
Adrian Chadd
210ab3c258 net80211: drop ieee80211_beacon_offsets parameter from ieee80211_beacon_alloc() and ieee80211_beacon_update()
Submitted by:	<s3erios@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D3659
2015-10-03 22:12:25 +00:00
Adrian Chadd
0cf00015be net80211: include one copy of struct ieee80211_beacon_offsets into ieee80211vap
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D3658
2015-09-22 06:34:07 +00:00
Adrian Chadd
d6166def28 net80211 & wireless drivers: remove duplicate defines (noop)
* IEEE80211_DIR_DSTODS(wh) -> IEEE80211_IS_DSTODS(wh).
* N(a) -> nitems(a).
* Remove LE_READ_2(p)/LE_READ_4(p) definitions (and include ieee80211_input.h instead).
* <drvname>_TXOP_TO_US(txop) -> IEEE80211_TXOP_TO_US(txop).
* Put IEEE80211_RV(v) into ieee80211_proto.h and remove local RV(v) definitions.

Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D3705
2015-09-22 02:44:59 +00:00
Kevin Lo
4bae831003 Fix a debug message which didn't quite get it right about eeprom version. 2015-09-16 07:18:54 +00:00
Gleb Smirnoff
7a79cebfba Replay r286410. Change KPI of how device drivers that provide wireless
connectivity interact with the net80211 stack.

Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.

Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:

- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
  the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
  driver about any changes: number of wlan(4) interfaces, number of them
  in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
  driver experiences errors and can not attribute them to any specific
  interface, driver updates ic_oerrors or ic_ierrors counters.

Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
  now provided by net.wlan.devices sysctl.

Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann,
Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in
testing.

Reviewed by:	adrian
Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-08-27 08:56:39 +00:00
Adrian Chadd
ba2c1fbc03 Revert the wifi ifnet changes until things are more baked and tested.
* 286410
* 286413
* 286416

The initial commit broke a variety of debug and features that aren't
in the GENERIC kernels but are enabled in other platforms.
2015-08-08 01:10:17 +00:00
Gleb Smirnoff
79d2c5e857 Change KPI of how device drivers that provide wireless connectivity interact
with the net80211 stack.

Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.

Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:

- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
  the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
  driver about any changes: number of wlan(4) interfaces, number of them
  in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
  driver experiences errors and can not attribute them to any specific
  interface, driver updates ic_oerrors or ic_ierrors counters.

Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
  now provided by net.wlan.devices sysctl.

Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to Olivier Cochard, gjb@, mmoll@,
op@ and lev@, who also participated in testing. Details here:

https://wiki.freebsd.org/projects/ifnet/net80211

Still, drivers: ndis, wtap, mwl, ipw, bwn, wi, upgt, uath were not
tested. Changes to mwl, ipw, bwn, wi, upgt are trivial and chances
of problems are low. The wtap wasn't compilable even before this change.
But the ndis driver is complex, and it is likely to be broken with this
commit. Help with testing and debugging it is appreciated.

Differential Revision:	D2655, D2740
Sponsored by:	Nginx, Inc.
Sponsored by:	Netflix
2015-08-07 11:43:14 +00:00
Gleb Smirnoff
272f6ade9b Change three methods in struct ieee80211com, namely ic_updateslot,
ic_update_mcast and ic_update_promisc, to pass pointer to the ieee80211com,
not to the ifnet.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-05-25 19:53:29 +00:00
Gleb Smirnoff
59686fe935 Set ic_softc in all 802.11 drivers. Not required right now, but will be
used quite soon.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-05-25 18:50:26 +00:00
Gleb Smirnoff
c8550c0278 Make net80211 drivers supply their device name to the net80211 layer, so
that the latter doesn't need to go through struct ifnet to get their name.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-05-25 13:51:13 +00:00
Kevin Lo
6fc44dab19 Add preliminary support for the Ralink RT5390 and RT5392 chipsets.
Committed over the D-Link DWA-525 rev A2 on amd64 with WPA.
2015-02-11 05:25:23 +00:00
Gleb Smirnoff
c8dfaf382f Mechanically convert to if_inc_counter(). 2014-09-19 03:51:26 +00:00
Kevin Lo
5945b5f5ab Rename definition of IEEE80211_FC1_WEP to IEEE80211_FC1_PROTECTED.
The origin of WEP comes from IEEE Std 802.11-1997 where it defines
whether the frame body of MAC frame has been encrypted using WEP
algorithm or not.
IEEE Std. 802.11-2007 changes WEP to Protected Frame, indicates
whether the frame is protected by a cryptographic encapsulation
algorithm.

Reviewed by:	adrian, rpaulo
2014-01-08 08:06:56 +00:00
Marius Strobl
97db2528ed - Add support for using MSI instead of INTx, controllable via the tunable
hw.ral.msi_disable (defaulting to using MSI).
- Probe with BUS_PROBE_DEFAULT instead of 0.
- Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0
  devices.
- Use PCIR_BAR instead of a homegrown macro.
- There's no need to keep track of resource IDs.
- Release resources again in case attaching fails.
- Quiesce the interrupt before detaching.
- Sprinkle const.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
- Trim headers.
- Nuke dupe $FreeBSD$.

MFC after:	1 week
2013-12-29 22:43:14 +00:00
Eitan Adler
7a22215c53 Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this
shifts into the sign bit.  Instead use (1U << 31) which gets the
expected result.

This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.

A similar change was made in OpenBSD.

Discussed with:	-arch, rdivacky
Reviewed by:	cperciva
2013-11-30 22:17:27 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Adrian Chadd
f8bf74f232 Implement basic 802.11n awareness in the PHY and AMRR rate control code.
* Add 802.11n 2ghz and 5ghz tables, including legacy rates and up to
  MCS23 rates (3x3.)

* Populate the rate code -> rate index lookup table with MCS _and_
  normal rates, but _not_ the basic rate flag.  Since the basic rate flag
  is the same as the MCS flag, we can only use one.

* Introduce some accessor inlines that do PLCP and rate table lookup/access
  and enforce that it doesn't set the basic rate bit.  They're not
  designed for MCS rates, so it will panic.

* Start converting drivers that use the rate table stuff to use the
  accessor inlines and strip the basic flag.

* Teach AMRR about basic 11n - it's still as crap for MCS as it is
  being used by iwn, so it's not a step _backwardS_.

* Convert iwn over to accept 11n MCS rates rather than 'translate' legacy
  to MCS rates.  It doesn't use a lookup table any longer; instead it's a
  function which takes the current node (for HT parameters) and the
  rate code, and returns the hardware PLCP code to use.

Tested:

* ath - it's a no-op, and it works that way
* iwn - both 11n and non-11n
2013-07-04 21:16:49 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00