Add missing words after PCI in the description of the PCIOCWRITE and
PCIOCATTACHED ioctls.
Use singular in PCIOCREAD, we only read one register at the time.
Reviewed by: bcr, bjk, rgrimes, cem
MFC after: 2 weeks
X-MFC-with: r349133
Differential Revision: https://reviews.freebsd.org/D20671
Document the PCIOCATTACHED ioctl(2) in the pci(4) manual.
PCIOCATTACHED is used to query if a driver has attached to a PCI.
Reviewed by: bcr, imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20652
Default to tracking .depend.* for OBJS rather than SRCS.
This helps cover some special case builds like gnu/lib/csu which
do more of a PROGS-like thing with bsd.prog.mk.
It is possible this causes out-of-tree Makefiles to have problems if they use
this pattern:
foo.o: foo.c
${CC} -o ${.TARGET} ${.ALLSRC}
This may cause multiple source files to be compiled due to finding the
'foo.o: foo.c' dependency both in the Makefile at the .depend file. Or
it may try compiling headers. This can be worked around by either of these:
foo.o: foo.c
${CC} -o ${.TARGET} ${.ALLSRC:N*.h:[1]}
Or
foo.o: foo.c
${CC} -o ${.TARGET} ${.CURDIR}/foo.c
In the latter case the ${.CURDIR} may need to be a different path. The
first case covers automatically using .PATH.
Sponsored by: DellEMC
If a meta mode change is triggered but then the build fails then the
next build will not retrigger meta mode. This only prevented by
removing the target on rebuild or on the failure to rebuild.
Sponsored by: DellEMC
This is in the case of not having any .depend.foo.o yet. Don't force add *.h
as a dependency for those. They are built in beforebuild already when in
SRCS/DPSRCS.
This change allows custom rules, like in bin/sh/Makefile for mksyntax, to not
have cyclic dependency problems when connected to the .depend.* handling.
This is purposely not copied to sys/conf/kern.post.mk as it handles
generating headers slightly differently.
MFC after: 2 weeks
Sponsored by: DellEMC
asserted. Some development boards for example will reset on DTR,
and some radio interfaces will transmit on RTS.
This patch allows "stty -f /dev/ttyu9.init -rtsdtr" to prevent
RTS and DTR from being asserted on open(), allowing these devices
to be used without problems.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D20031
New sysctl/tunables can now set the interval (in seconds) between
rate-limited crypto warnings. The new sysctls are:
- kern.cryptodev_warn_interval for /dev/crypto
- net.inet.ipsec.crypto_warn_interval for IPsec
- kern.kgssapi_warn_interval for KGSSAPI
Reviewed by: cem
MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20555
This documents the behavior of sysctl_msec_to_ticks and
SYSCTL_{ADD,}_SBINTIME_[UM]SEC.
Reviewed by: cem
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20596
Consensus seems to be that eliding blank lines for functions with no local
variables is acceptable. Codify that explicitly in the style document.
Reported by: jhb
Reviewed by: delphij, imp, vangyzen (earlier version); rgrimes
With feedback from: kib
Differential Revision: https://reviews.freebsd.org/D20448
ccr depends on symbols exported by the cxgbe driver as well as having
a runtime dependency. While the runtime depenency was noted in the
manpage already, the compile-time dependency wasn't as clear.
PR: 238265
MFC after: 3 days
Sponsored by: Chelsio Communications
Other frameworks, such as googletest, should be added there as well,
once they become viable. For now let's keep it simple.
Discussed with: ngie, emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20124
struct xucred. Do not bump XUCRED_VERSION as struct layout is not changed.
PR: 215202
Reviewed by: tijl
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20415
The issues were pointed in community review:
https://reviews.freebsd.org/D10427#inline-67587
Also, fix other issues found by the igor tool.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
* F_RDLCK, F_UNLCK, and F_WRLCK aren't flags. They're stored in the
fl.l_type field.
* Add F_REMOTE, added in r177633
* Add F_NOINTR, added in r180025
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Due to how the linker.hints file is laid out, we'll associate the pnp
info with the wrong module if the module declaration comes after the
pnp info. Until that limiation is removed, we need to have this
ordering. Ideally, we'd also enforce the ordering somehow, but I've
come up with no way to do that yet...
Revison 222167 added a new argument to VFS_FHTOVP. This revision updates the
man page to match.
Reviewed by: rmacklem
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20323
ed(4) and ep(4) have been removed. fxp(4) remains popular in older
systems, but isn't as future proof as em(4).
Reviewed by: bz, jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20311
This is described in the vmem paper: "directs vmem to use the next free
segment after the one previously allocated." The implementation adds a
new boundary tag type, M_CURSOR, which is linked into the segment list
and precedes the segment following the previous M_NEXTFIT allocation.
The cursor is used to locate the next free segment satisfying the
allocation constraints.
This implementation isn't O(1) since busy tags aren't coalesced, and we
may potentially scan the entire segment list during an M_NEXTFIT
allocation.
Reviewed by: alc
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17226
tun(4) and tap(4) share the same general management interface and have a lot
in common. Bugs exist in tap(4) that have been fixed in tun(4), and
vice-versa. Let's reduce the maintenance requirements by merging them
together and using flags to differentiate between the three interface types
(tun, tap, vmnet).
This fixes a couple of tap(4)/vmnet(4) issues right out of the gate:
- tap devices may no longer be destroyed while they're open [0]
- VIMAGE issues already addressed in tun by kp
[0] emaste had removed an easy-panic-button in r240938 due to devdrn
blocking. A naive glance over this leads me to believe that this isn't quite
complete -- destroy_devl will only block while executing d_* functions, but
doesn't block the device from being destroyed while a process has it open.
The latter is the intent of the condvar in tun, so this is "fixed" (for
certain definitions of the word -- it wasn't really broken in tap, it just
wasn't quite ideal).
ifconfig(8) also grew the ability to map an interface name to a kld, so
that `ifconfig {tun,tap}0` can continue to autoload the correct module, and
`ifconfig vmnet0 create` will now autoload the correct module. This is a
low overhead addition.
(MFC commentary)
This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this,
and how critical they are. Changes after this are likely easily MFC'd
without taking this merge, but the merge will be easier.
I have no plans to do this MFC as of now.
Reviewed by: bcr (manpages), tuexen (testing, syzkaller/packetdrill)
Input also from: melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20044
device_printf does multiple calls to printf allowing other console messages to
be inserted between the device name, and the rest of the message. This change
uses sbuf to compose to two into a single buffer, and prints it all at once.
It exposes an sbuf drain function (drain-to-printf) for common use.
Update documentation to match; some unit tests included.
Submitted by: jmg
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16690
By default, cores are now assigned to queues in a sequential
manner rather than all NICs starting at the first core. On a four-core
system with two NICs each using two queue pairs, the nic:queue -> core
mapping has changed from this:
0:0 -> 0, 0:1 -> 1
1:0 -> 0, 1:1 -> 1
To this:
0:0 -> 0, 0:1 -> 1
1:0 -> 2, 1:1 -> 3
Additionally, a device can now be configured to use separate cores for TX
and RX queues.
Two new tunables have been added, dev.X.Y.iflib.separate_txrx and
dev.X.Y.iflib.core_offset. If core_offset is set, the NIC is not part
of the auto-assigned sequence.
Reviewed by: marius
MFC after: 2 weeks
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D20029
This GRE-in-UDP encapsulation allows the UDP source port field to be
used as an entropy field for load-balancing of GRE traffic in transit
networks. Also most of multiqueue network cards are able distribute
incoming UDP datagrams to different NIC queues, while very little are
able do this for GRE packets.
When an administrator enables UDP encapsulation with command
`ifconfig gre0 udpencap`, the driver creates kernel socket, that binds
to tunnel source address and after udp_set_kernel_tunneling() starts
receiving of all UDP packets destined to 4754 port. Each kernel socket
maintains list of tunnels with different destination addresses. Thus
when several tunnels use the same source address, they all handled by
single socket. The IP[V6]_BINDANY socket option is used to be able bind
socket to source address even if it is not yet available in the system.
This may happen on system boot, when gre(4) interface is created before
source address become available. The encapsulation and sending of packets
is done directly from gre(4) into ip[6]_output() without using sockets.
Reviewed by: eugen
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19921
This commit adds new if_alloc_domain() and if_alloc_dev() methods to
allocate ifnets. When called with a domain on a NUMA machine,
ifalloc_domain() will record the NUMA domain in the ifnet, and it will
allocate the ifnet struct from memory which is local to that NUMA
node. Similarly, if_alloc_dev() is a wrapper for if_alloc_domain
which uses a driver supplied device_t to call ifalloc_domain() with
the appropriate domain.
Note that the new if_numa_domain field fits in an alignment pad in
struct ifnet, and so does not alter the size of the structure.
Reviewed by: glebius, kib, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19930
r345708 worked for the base system, but unfortunately, caused a lot of
disruption for third-party packages that relied on C++, since bsd.sys.mk is
used by applications outside the base system. The defaults picked didn't match
the compiler's defaults and broke some builds that didn't specify a standard,
as well as some that overrode the value by setting `-std=gnu++14` (for
example) manually.
This change takes a more relaxed approach to appending `-std=${CXXSTD}` to
CXXFLAGS, by only doing so when the value is specified, as opposed to
overriding the standard set by an end-user. This avoids the need for having
to bake NOP default into bsd.sys.mk for supported compiler-toolchain
versions.
In order to make this change possible, add CXXSTD to Makefile snippets which
relied on the default value (c++11) added in r345708.
MFC after: 2 weeks
MFC with: r345708, r346574
Reviewed by: emaste
Reported by: jbeich
Differential Revision: https://reviews.freebsd.org/D19895 (as part of a larger change)
Previous spellings of my name (NGie, Ngie) weren't my legal spelling. Use Enji
instead for clarity.
While here, remove "All Rights Reserved" from copyrights I "own".
MFC after: 1 week
This fixes a bug where, even when hw.psm.tap_enabled=0, touchpad taps
were processed.
tap_enabled has three states: unconfigured, disabled, and enabled (-1, 0, 1).
To respect PR kern/139272, taps are ignored only when explicity disabled.
Submitted by: Ben LeMasurier <ben@crypt.ly> (initial version)
MFC after: 2 weeks
It is a useful arc4random wrapper in the kernel for much the same reasons as
in userspace. Move the source to libkern (because kernel build is
restricted to sys/, but userspace can include any file it likes) and build
kernel and libc versions from the same source file.
Copy the documentation from arc4random_uniform(3) to the section 9 page.
While here, add missing arc4random_buf(9) symlink.
Sponsored by: Dell EMC Isilon
FreeBSD does not set the pid field in the pfloghdr struct. This field is
populated on other platforms, document this to save people from trying
to use this field.
Event: Aberdeen hackathon 2019
Reviewed by: kp, bcr, bz
Approved by: bz (mentor)
Differential Revision: https://reviews.freebsd.org/D19952
FDT_DTS_FILE was built separately with a rule in sys/conf/files and
recreated the rules we used in dtb.mk. Now that we have other infrastructure
to build a DTB along with the kernel, fold FDT_DTS_FILE into that since it
doesn't have any special requirements.
fdt(4) never got revised to mention the DTS/DTSO make options, so do that
now.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19736
isc_rxd_refill, isc_rxd_flush return nothing, not void *.
isc_txd_credits_update, isc_rxd_available return int, not int *.
isc_txd_credits_update has a bool as final argument, not a uint32_t.
Prior to r315217 it took four arguments; the final two were
uint32_t, bool.
Reported by: Gerald Aryeetey <aryeeteygerald_rogers.com>
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The imagined use is for early boot consumers of random to be able to make
decisions based on whether random is available yet or not. One such
consumer seems to be __stack_chk_init(), which runs immediately after random
is initialized. A follow-up patch will attempt to address that.
Reported by: many
Reviewed by: delphij (except man page)
Approved by: secteam(delphij)
Differential Revision: https://reviews.freebsd.org/D19926
The pflog0 interface is created when the module is loaded, this can
be triggered by pf and pflogd being enabled or by kldloading the module.
By default the interface would be pflog0, add the ifconfig stage of the
example to make this example clearer.
Reviewed by: kp, bz, bcr, jtl, 0mp
Approved by: jtl (mentor), bz (mentor)
Differential Revision: https://reviews.freebsd.org/D19861