This change includes:
hpen - Generic / MS Windows compatible HID pen tablet driver.
hgame - Generic game controller and joystick driver.
xb360gp - Xbox360-compatible game controller driver.
Submitted by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27993)
hidmap is a kernel module that maps HID input usages to evdev events.
Following dependent drivers is included in the commit:
hms - HID mouse driver.
hcons - Consumer page AKA Multimedia keys driver.
hsctrl - System Controls page (Power/Sleep keys) driver.
ps4dshock - Sony DualShock 4 gamepad driver.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27993
which installs /dev/uhid# alias to hidraw character device for
compatibility with some existing uhid(4) users like Firefox.
As side effect it renames traditional uhid(4) driver to hidraw
to make possible using of common unit number allocator.
Requested by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27992)
This driver provides raw access to HID devices through uhid(4)-compatible
interface and is based on pre-8.x uhid(4) code. Unlike uhid(4) it does
not take devices in to monopoly ownership and allows parallel access
from other drivers.
hidraw supports Linux's hidraw-compatible interface as well.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27992
This allows to mark HID-device interrupt handlers as MP-SAFE.
Atomics-based lockless key event queue with swi_giant taskqueue is used
to pass key-press events into Giant-protected system console.
Reviewed by: hselasky (as part of D27991)
This change implements hid_if.m methods for HID-over-USB protocol [1].
Also, this change adds USBHID_ENABLED kernel option which changes
device_probe() priority and adds/removes PnP records to prefer usbhid
over ums, ukbd, wmt and other USB HID device drivers and vice-versa.
The module is based on uhid(4) driver. It is disabled by default for
now due to conflicts with existing USB HID drivers.
[1] https://www.usb.org/sites/default/files/hid1_11.pdf
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27893
hidquirk(4) is derived from usb_quirk(4) and inherits all its HID-related
functionality. It does not support ioctl(2) interface yet.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27890
This driver provides support for multiple HID driver attachments
to single HID transport backend. This ability existed in Net/OpenBSD
(uhidev and ihidev drivers) but has never been ported to FreeBSD.
Unlike Net/OpenBSD we do not use report number alone to distinct report
source but we follow MS way and use a top level collection (TLC) usage
index that report belongs to as a location key.
The driver performs child device autodiscovery based on HID report
descriptor data, proxying of HID requests from child devices to parent
transport backends and broadcasting of interrupts in backward direction.
Differential revision: https://reviews.freebsd.org/D27888
Create an abstract HID interface that provides hardware independent
access to HID capabilities and functions through the device tree.
hid_if.m resembles existing USBHID KPI and consist of next methods:
HID method USBHID variant
-----------------------------------------------------------------------
hid_intr_setup usbd_transfer_setup (INTERRUPT IN xfer)
hid_intr_unsetup usbd_transfer_unsetup (INTERRUPT IN xfer)
hid_intr_start usbd_transfer_start (INTERRUPT IN xfer)
hid_intr_stop usbd_transfer_drain (INTERRUPT IN xfer)
hid_intr_poll usbd_transfer_poll (INTERRUPT IN xfer)
hid_get_rdesc usbd_req_get_report_descriptor
hid_read No direct analog. Not intended for common use.
hid_write uhid(4) write()
hid_get_report usbd_req_get_report
hid_set_report usbd_req_set_report
hid_set_idle usbd_req_set_idle
hid_set_protocol usbd_req_set_protocol
This change is part of D27888
Also hide shim code added in a previous commit under COMPAT_USBHID12.
Note: it is enough to add -DCOMPAT_USBHID12 to CFLAGS to compile old
code with new HID subsystem, but it is not enough to link it at runtime.
HID dependency has to be added explicitly with MODULE_DEPEND macro.
Reviewed by: manu, hselasky (as part of D27887)
This does an import of quirk stubs, debugging macros from USB code and
numerous usage constants used by dependent drivers.
Besides, this change renames some functions to get a better matching
with userland library and NetBSD/OpenBSD HID code. Namely:
- Old hid_report_size() renamed to hid_report_size_max()
- New hid_report_size() calculates size of given report rather than
maximum size of all reports.
- hid_get_data_unsigned() renamed to hid_get_udata()
- hid_put_data_unsigned() renamed to hid_put_udata()
Compat shim functions are provided in usbhid.h to make possible compile
of legacy code unmodified after this change.
Reviewed by: manu, hselasky
Differential revision: https://reviews.freebsd.org/D27887
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
It is possible that the client list lock is taken by other process for too
long due to e.g. IO timeouts. Allow user to terminate open() in this case.
Reviewed by: markj (as part of D27865)
At the beginning of evdev there was a LOR between hardware driver's and
evdev client list locks as they were taken in different order at
driver's interrupt and evdev open()/close() handlers.
The LOR was fixed with introduction of evdev_register_mtx() function
which allowed to use a hardware driver's lock as evdev client list lock.
While this works good with PS/2 and USB, this does not work with I2C.
Unlike PS/2 and USB, I2C open()/close() handlers do unbound sleeps
while waiting for I2C bus to release and while performing IO.
This change uses epoch(9) for traversing evdev client list in interrupt
handler to avoid the LOR thus making possible to convert evdev client
list lock to sleepable sx.
While here add brief locking protocol description.
Reviewed by: markj
Differential revision: https://reviews.freebsd.org/D27865
hid_locate() currently ignores all HID items which tagged as constant,
i.e. bit 0 of main item data is set to 1. See p.6.2.2.4 of
hid1_11.pdf [1]. Such an items are unconditionally treated as
byte-alignment padding. While that may be right decision for input and
output reports that is wrong for features reports. Feature reports can
contain constant capabilities e.g. 'Contact Count Maximum'.
See: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=232040
Remove check for constant from hid_locate() to make possible parsing of
such a reports.
[1] https://www.usb.org/sites/default/files/documents/hid1_11.pdf
Reviewed by: hselasky
Obtained from: sysutils/iichid
Differential Revision: https://reviews.freebsd.org/D27747
This was overlooked in the pfi_kkif/pfi_kif splitup and as a result
userspace could no longer tell which interfaces had the skip flag
applied.
MFC after: 2 weeks
Doing a 'dd' over iscsi will reliably cause stalls. Tx
cleaning _should_ reliably happen as data is sent.
However, currently if the transmit queue fills it will
wait until the iflib timer (hz/2) runs.
This change causes the the tx taskq thread to be run
if there are completed descriptors.
While here:
- make timer interrupt delay a sysctl
- simplify txd_db_check handling
- comment on INTR types
Background on the change:
Initially doorbell updates were minimized by only writing to the register
on every fourth packet. If txq_drain would return without writing to the
doorbell it scheduled a callout on the next tick to do the doorbell write
to ensure that the write otherwise happened "soon". At that time a sysctl
was added for users to avoid the potential added latency by simply writing
to the doorbell register on every packet. This worked perfectly well for
e1000 and ixgbe ... and appeared to work well on ixl. However, as it
turned out there was a race to this approach that would lockup the ixl MAC.
It was possible for a lower producer index to be written after a higher one.
On e1000 and ixgbe this was harmless - on ixl it was fatal. My initial
response was to add a lock around doorbell writes - fixing the problem but
adding an unacceptable amount of lock contention.
The next iteration was to use transmit interrupts to drive delayed doorbell
writes. If there were no packets in the queue all doorbell writes would be
immediate as the queue started to fill up we could delay doorbell writes
further and further. At the start of drain if we've cleaned any packets we
know we've moved the state machine along and we write the doorbell (an
obvious missing optimization was to skip that doorbell write if db_pending
is zero). This change required that tx interrupts be scheduled periodically
as opposed to just when the hardware txq was full. However, that just leads
to our next problem.
Initially dedicated msix vectors were used for both tx and rx. However, it
was often possible to use up all available vectors before we set up all the
queues we wanted. By having rx and tx share a vector for a given queue we
could halve the number of vectors used by a given configuration. The problem
here is that with this change only e1000 passed the necessary value to have
the fast interrupt drive tx when appropriate.
Reported by: mav@
Tested by: mav@
Reviewed by: gallatin@
MFC after: 1 month
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D27683
vn_rdwr() must lock the entire file range for IO_APPEND
just like vn_io_fault() does for O_APPEND.
Reviewed by: kib, imp, mckusick
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D28008
Only ACPI attachment is supported for now, some others depend on the
presence of smbios(4) support, which we lack on arm64.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28009
A straightforward(ish) port from aesni(4). This implementation does not
perform loop unrolling on the input blocks, so this is left as a future
performance improvement.
Submitted by: Greg V <greg AT unrelenting.technology>
Looks good: jhb, jmg
Tested by: mhorne
Differential Revision: https://reviews.freebsd.org/D21017
In the conversion into a tunable, we converted the
size of the s/g list used by the driver to be based
off of a hardcoded size of 128k rather than maxphys,
this caused performance problems for us. Revert this
to use the maxphys tunable.
Note that this constant is used to size dynamically allocated
things, and not static data structs, so this is safe.
Reviewed By: imp, kib, mav
Tested By:i dhw
Differential Revision: https://reviews.freebsd.org/D28023
Sponsored by: Netflix
No functional change - only moved lines, changed whitespace, and
updated comments.
Reviewed by: allanjude
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28001
Code changes in this commit were obtained from straight from OpenBSD's
uplcom.c with almost no modification, the list of chip names and USB
IDs was obtained from Linux.
Differential Revision: https://reviews.freebsd.org/D27952
Submitted by: tomli_tomli.me (Yifeng Li)
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
This makes the minimum amount of changes to allow inclusion of dtrace.h
without all the solaris compatibility headers. Installing dtrace.h allows
compiling consumers of libdtrace (e.g. https://github.com/tmetsch/python-dtrace)
without requiring a copy of the source tree.
For python-dtrace I worked around this in 58019c9a12
but being able to build the library without installed sources would be
extremely useful.
Reviewed By: gnn
Differential Revision: https://reviews.freebsd.org/D27884
There is no reason this driver can't return default probe value.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: emaste, mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26869
Replace various hw reg bit set/clear helpers with a universal
`qoriq_gpio_set` function.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26868
Make the code more conformant to style(9) and improve the general
readability.
This patch does not alter the driver logic.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26867
The routine can be used when the caller does not expect to ever have to
wait for anything. Checking later with seqc_consistent retains all the
guarantees.
Now that we've split up the datastructures used by the kernel and
userspace there's essentually no more overlap between the pf_ruleset.c
code used by userspace and kernelspace.
Copy the userspace bits to the pfctl directory and stop using the kernel
file.
Reviewed by: philip
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27764
Improve caching behaviour by using counter_u64 rather than variables
shared between cores.
The result of converting all counters to counter(9) (i.e. this full
patch series) is a significant improvement in throughput. As tested by
olivier@, on Intel Xeon E5-2697Av4 (16Cores, 32 threads) hardware with
Mellanox ConnectX-4 MCX416A-CCAT (100GBase-SR4) nics we see:
x FreeBSD 20201223: inet packets-per-second
+ FreeBSD 20201223 with pf patches: inet packets-per-second
+--------------------------------------------------------------------------+
| + |
| xx + |
|xxx +++|
||A| |
| |A||
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 9216962 9526356 9343902 9371057.6 116720.36
+ 5 19427190 19698400 19502922 19546509 109084.92
Difference at 95.0% confidence
1.01755e+07 +/- 164756
108.584% +/- 2.9359%
(Student's t, pooled s = 112967)
Reviewed by: philip
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27763
Factor out allocating and freeing pfi_kkif structures. This will be
useful when we change the counters to be counter_u64, so we don't have
to deal with that complexity in the multiple locations where we allocate
pfi_kkif structures.
No functional change.
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27762
This improves the cache behaviour of pf and results in improved
throughput.
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27760
The u_* counters are used only to communicate with userspace, as
userspace cannot use counter_u64. As pf_krule is not passed to userspace
these fields are now obsolete.
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27759
As part of the split between user and kernel mode structures we're
moving all user space usable definitions into pf.h.
No functional change intended.
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27757
Introduce a kernel version of struct pf_src_node (pf_ksrc_node).
This will allow us to improve the in-kernel data structure without
breaking userspace compatibility.
Reviewed by: philip
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27707
Later dtb from the RPI Foundation removed the brcm,genet-v5 compatible
for some unknown reason, add brcm,bcm2711-genet-v5 to the list of compatible
device for if_genet
We increment the overflow count when receiving an overflow interrupt
with special care to check if it happens while reading the event counter.
Sponsored by: Innovate UK
It appears we must read MIB values as 2 4-byte words, lower address
first. A single 8-byte MIB read returns the value with the lower 4
bytes copied into the upper 4 bytes, resulting in bogus byte counter
values.
Reviewed by: mw
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D27870
Release a grabbed page's busy state only after marking it as referenced.
Otherwise there exists a narrow window where the page could be freed
before the update. Before r356902 this was not a problem since the
object lock was held.
Discussed with: kib
Sponsored by: The FreeBSD Foundation
- Add I2S and CODEC clocks to CRU driver
- Add support for gate selection to frac clock
- Add setfreq support to mux clock
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D27831
When INVARIANTS is configred, the sendfile_iodone() callback verifies
that pages attached to the sendfile header are wired, but we unwire all
such pages after a synchronous pager error, before calling
sendfile_iodone().
Reported by: pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
There are no non-MPSAFE SIM drivers left in the tree, verified with
coccinelle.
Reviewed by: scottl, imp
Differential Revision: https://reviews.freebsd.org/D27853
We have the d_off field in struct dirent for providing the seek offset
of the next directory entry. Several filesystems were not initializing
the field, which ends up being copied out to userland.
Reported by: Syed Faraz Abrar <faraz@elttam.com>
Reviewed by: kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27792
startup_alloc() uses pmap_map() to map slabs used for bootstrapping the
VM. pmap_map() may ignore the hint address and simply return a range
from the direct map. In this case we must not unmap the range in
startup_free().
UMA uses bootstart and bootmem to track the range of KVA into which
slabs are mapped if the direct map is not used. Unmap a startup slab
only if it was mapped into that range.
Reported by: alc
Reviewed by: alc, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27885
Must lock the vnode before accessing the fufh table. Also, check for
invalid parameters earlier. Bug introduced by r346170.
MFC after: 2 weeks
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D27936
Fix non-FreeBSD CI build after v1.4.8. This definition was only used in
zstd(1), which isn't part of non-FreeBSD CI (I guess). The ifdef was
added in v1.4.5 import.
Upstream does not currently support shared-linked zstd(1), but I have
proposed https://github.com/facebook/zstd/pull/2450 . If that is
adopted, we can add -DZSTD_PROGRAMS_LINK_SHARED to our libzstd build and
drop some diffs.
Reported by: uqs
POSIX AIO is great, but it lacks vectored I/O functions. This commit
fixes that shortcoming by adding aio_writev and aio_readv. They aren't
part of the standard, but they're an obvious extension. They work just
like their synchronous equivalents pwritev and preadv.
It isn't yet possible to use vectored aiocbs with lio_listio, but that
could be added in the future.
Reviewed by: jhb, kib, bcr
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27743
The fix in bd03acedb8 worked for 32-bit
ops, and for 64-bit ops for bit arguments of 0 - 95, but then was broken
for operations on the high 32 bits after that.
Reviewed by: markj, mmel
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27897
Upon exit from the debugger, checking the return code of kdb_trap()
allows one to retry the fatal page fault. This matches what is done on
all other architectures.
Reviewed by: jhb (earlier version)
Differential Revision: https://reviews.freebsd.org/D27535
These macros generate both the 32- and 64-bit ops, but the mask was hard
coded for 32-bit ops, causing the 64-bit ops always to affect only the
low 32 bits.
PR: 252324
Reported by: gbe, mmel
Reviewed by: markj, mmel
Tested by: mmel, rwatson
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27886
Draw console on efi.
Add vbe framebuffer for BIOS loader (vbe off, vbe on, vbe list,
vbe set xxx).
autoload font (/boot/fonts) based on resolution and font size.
Add command loadfont (set font by file) and
variable screen.font (set font by size). Pass loaded font to kernel.
Export variables:
screen.height
screen.width
screen.depth
Add gfx primitives to draw the screen and put png image on the screen.
Rework menu draw to iterate list of consoles to enamble device specific
output.
Probably something else I forgot...
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27420
In particular, do not assume that vn_start_write() returns the same mp
as it was passed in, or never returns error.
Also be more accurate to return NULL vp and mp when error occured, to
catch wrong control flow easier.
Stop checking for NULL mp before calling vn_finished_write(), NULL mp
is handled transparently by the function.
Reviewed by: rmacklem
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27881
Commit 774a36851e fixed the NFS server so that it could handle
ERELOOKUP returns from VOP calls by redoing the operation/RPC.
However, for NFSv4.0, redoing an Open would increment
the open_owner's seqid multiple times, breaking the protocol.
This patch sets a new flag called ND_ERELOOKUP on the RPC when
a redo is in progress. Then the code that increments the seqid
avoids the seqid increment/check when the flag is set, since
it indicates this has already been done for the Open.
r367672 modified UFS such that certain VOPs, such as
VOP_CREATE() will intermittently return ERELOOKUP.
When this happens, the entire system call, or NFS
operation in the case of the NFS server, must be redone.
This patch adds that support to the NFS server by rolling
back the state of the NFS request arguments and NFS
reply arguments mbuf lists to the condition they were
in before the operation and then redoing the operation.
Tested by: pho
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D27875
This updates the FUSE protocol to 7.28, though most of the new features
are optional and are not yet implemented.
MFC after: 2 weeks
Relnotes: yes
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D27818
The change to kern_jail_set that was supposed to "also properly clean
up when attachment fails" didn't fix a memory leak but actually caused
a double free. Back that part out, and leave the part that manages
allprison_lock state.
The "findstack", "show all trace", and "show active trace" commands
were iterating over allproc to enumerate threads. This missed threads
executing in exit1() after being removed from allproc.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27829
Not all debugger operations that enumerate threads require thread
stacks to be resident in memory to be useful. Instead, push P_INMEM
checks (if needed) into callers.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27827
Processes part way through exit1() are not included in allproc. Using
allproc to enumerate processes prevented getting the stack trace of a
thread in this part of exit1() via ddb.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27826
This is used by kernel debuggers to enumerate processes via the pid
hash table.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27825
Exiting processes that have been removed from allproc but are still
executing are not yet marked PRS_ZOMBIE, so they were not listed (for
example, if a thread panics during exit1()). To detect these
processes, clear p_list.le_prev to NULL explicitly after removing a
process from the allproc list and check for this sentinel rather than
PRS_ZOMBIE when walking the pidhash.
While here, simplify the pidhash walk to use a single outer loop.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27824
Keep explicit track of the allprison_lock state during the final part
of kern_jail_set, instead of deducing it from the JAIL_ATTACH flag.
Also properly clean up when the attachment fails, fixing a long-
standing (though minor) memory leak.
Use atomic testandset and testandclear to catch concurrent double free,
and to reduce the number of atomic operations.
Submitted by: jeff
Reviewed by: cem, kib, markj (all previous version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22703
That is, provide wrappers around the atomic_testandclear and
atomic_testandset primitives.
Submitted by: jeff
Reviewed by: cem, kib, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22702
After the removal of obsolete GDB 6.1.1 from the base system in
1c0ea326aa we no longer need to downgrade to DWARF2 debug info.
We will need to ensure that our tools (e.g. ctfconvert) handle DWARF5
prior to it becoming the default in the Clang and GCC versions we use.
Reported by: jhb
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
An 8MB max stack size is quite limiting in today's world, and in-fact is
the *default* stack size for almost every other arch (including mips).
Raise the default to 4MB (should be pretty reasonable) and the max to 64MB.
NetBSD made a similar move back in 2015 and raised MAXDSIZ to 1856 at the
same time, so let's just roll that in as well. They later lowered it, but
eventually raised it back to 1856 in order to build rust.
This was noticed while looking at qemu-bsd-user's default stack sizes and
growth behavior (or lack thereof).
Reviewed by: ian
Differential Revision: https://reviews.freebsd.org/D27218
When a break-to-debugger is triggered, kdb will grab the console and vt(4)
will generally switch back to ttyv0. If one issues a continue from the
debugger, then kdb will ungrab the console and the system rolls on.
This change adds a perhaps minor feature: when we're down to grab == 0 and
if vt actually switched away to ttyv0, switch back to the tty it was
previously on before the console was grabbed.
The justification behind this is that a typical flow is to work in
!ttyv0 to avoid console spam while occasionally dropping to ddb to inspect
system state before returning. This could easily enough be tossed behind
a sysctl or something if it's not generally appreciated, but I anticipate
indifference.
Reviewed by: ray
Differential Revision: https://reviews.freebsd.org/D27110
vt_allocate_keyboard only needs to unwind the effects of keyboard-grabbing,
rather than any associated vt window action that may have also happened.
Split out the bits that do the keyboard work into *_noswitch equivalents,
and use those in keyboard allocation. This will be less error-prone when a
later change will offer up different window state behavior when the console
is ungrabbed.
Reviewed by: ray
Differential Revision: https://reviews.freebsd.org/D27110
FUSE_LSEEK reports holes on fuse file systems, and is used for example
by bsdtar.
MFC after: 2 weeks
Relnotes: yes
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D27804
The firmware header loaded into an rsu(4) device has to be customized
to reflect device settings. The driver was overwriting the header
from the shared firmware image before sending it to the device. If
two devices attached at the same time with different settings, one
device could potentially get a corrupted header. The recent changes
in a095390344 exposed this bug in the
form of a panic as the firmware blobs are now marked read-only in
object files and mapped read-only by the kernel.
To avoid the bug, change the driver to allocate a copy of the firmware
header on the stack that is initialized before writing it to the
device.
PR: 252163
Reported by: vidwer+fbsdbugs@gmail.com
Tested by: vidwer+fbsdbugs@gmail.com
Reviewed by: hselasky, bz, emaste
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27850
Enable build of IPMI over OPAL on powerpc64le
Reviewed by: bdragon
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D27443
It's possible for a context switch, and CPU migration, to occur between
fetching the PCPU context and extracting the pc_curpcb. This can cause
the fault handler to be installed for the wrong thread, leading to a
panic in copyin()/copyout(). Since curthread is already in %r13, just
use that directly, as GPRs are migrated, so there is no migration race
risk.
Currently copyinstr() uses fubyte() to read each byte from userspace.
However, this means that for each byte, it calls pmap_map_user_ptr() to
map the string into memory. This is needlessly wasteful, since the
string will rarely ever cross a segment boundary. Instead, map a
segment at a time, and copy as much from that segment as possible at a
time.
Measured with the HPT pmap on powerpc64, this saves roughly 8% time on
buildkernel, and 5% on buildworld, in wallclock time.
- fix values returned by 'sysctls dev.opal_sensor.*.sensor'
- fix missing 'dev.opal_sensor.*.sensor_[max|min]' on sysctl
Reviewed-by: jhibbits
Sponsored-by: Eldorado Research Institute (eldorado.org.br)
Differential-Revision: https://reviews.freebsd.org/D27365
The handshake timer can race with another thread sending a FIN or RST
to close a TOE TLS socket. Just bail from the timer without
rescheduling if the connection is closed when the timer fires.
Reported by: Sony Arpita Das @ Chelsio QA
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D27583
This tool can generate kernel images without changing the offsets in
the final executable. It replaces the ELF header by properly sized zeroed
block then emits a relative jump to _start(for 'v7jump' or 'v8jump' option)
or the booti header (for 'v8booti' option) to the beginning of the converted file.
Submited by: ian
Xenstore watches received are queued in a list and processed in a
deferred thread. Such queuing was done without any checking, so a
guest could potentially trigger a resource starvation against the
FreeBSD kernel if such kernel is watching any user-controlled xenstore
path.
Allowing limiting the amount of pending events a watch can accumulate
to prevent a remote guest from triggering this resource starvation
issue.
For the PV device backends and frontends this limitation is only
applied to the other end /state node, which is limited to 1 pending
event, the rest of the watched paths can still have unlimited pending
watches because they are either local or controlled by a privileged
domain.
The xenstore user-space device gets special treatment as it's not
possible for the kernel to know whether the paths being watched by
user-space processes are controlled by a guest domain. For this reason
watches set by the xenstore user-space device are limited to 1000
pending events. Note this can be modified using the
max_pending_watch_events sysctl of the device.
This is XSA-349.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
