Most easily reproducible by attempting to activate the currently activated
BE, one would get a "not a cloned filesystem" error instead of success or a
sane message.
PR: 232488
MFC after: 3 days
- Document that mount_smbfs(8) only supports SMB1 and that SMB2 and SMB3
are not supported at the moment. Suggest users to browse ports for
software compatible with newer versions of the protocol.
- Copy supported servers list from README.
- Add a SEE ALSO section and reference the chapter about Samba in the
FreeBSD Handbook.
- Add a HISTORY section.
- Style changes:
- Use Dq instead of Em in the EXAMPLES section.
- Mark command modifiers with Cm.
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 1 week
Sponsored by: Bally Wulff Games & Entertainment GmbH
Differential Revision: https://reviews.freebsd.org/D17798
specification for the comparisons made.
Thanks to lstewart@ for the suggestion.
MFC after: 4 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D17595
program to use the libufs library interface. No functional change
(as for now the libufs library does not do inode check-hashes).
Reviewed by: kib
Sponsored by: Netflix
On some Intel devices BIOS does not properly reserve memory (called
"stolen memory") for the GPU. If the stolen memory is claimed by the
OS, functions that depend on stolen memory (like frame buffer
compression) can't be used.
A function called pci_early_quirks that is called before the virtual
memory system is started was added. In Linux, this PCI early quirks
function iterates through all PCI slots to check for any device that
require quirks. While this more generic solution is preferable I only
ported the Intel graphics specific parts because I think my
implementation would be too similar to Linux GPL'd solution after
looking at the Linux code too much.
The code regarding Intel graphics stolen memory was ported from
Linux. In the case of Intel graphics stolen memory this
pci_early_quirks will read the stolen memory base and size from north
bridge registers. The values are stored in global variables that is
later read by linuxkpi_gplv2. Linuxkpi stores these values in a
Linux-specific structure that is read by the drm driver.
Relevant linuxkpi code is here:
https://github.com/FreeBSDDesktop/kms-drm/blob/drm-v4.16/linuxkpi/gplv2/src/linux_compat.c#L37
For now, only amd64 arch is suppor ted since that is the only arch
supported by the new drm drivers. I was told that Intel GPUs are
always located on 0:2:0 so these values are hard coded for now.
Note that the structure and early execution of the detection code is
not required in its current form, but we expect that the code will be
added shortly which fixes the potential BIOS bugs by reserving the
stolen range in phys_avail[]. This must be done as early as possible
to avoid conflicts with the potential usage of the memory in kernel.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Reviewed by: bwidawsk, imp
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16719
Differential revision: https://reviews.freebsd.org/D17775
The loader tunable 'debug.verbose_sysinit' may be used to toggle verbosity.
This is added to the debugging section of these kernconfs to be turned off
in stable branches for clarity of intent.
MFC after: never
This adds new keywords to rc/service to enable/disable a service's
rc.conf(5) variable and "delete" to remove the variable.
When the "service_delete_empty" variable in rc.conf(5) is set to "YES"
(default is "NO") an rc.conf.d file (in /etc/ or /usr/local/etc) is
deleted if empty after modification using "service $foo delete".
Submitted by: lme (modified)
Reviewed by: 0mp (previous version), lme, bcr
Relnotes: yes
Sponsored by: Smule, Inc.
Differential Revision: https://reviews.freebsd.org/D17113
Further to r339946 skip the .error case for lack of in-tree binutils
support when we haven't set the toolchain feature variables.
Discussed with: arichardson
Sponsored by: The FreeBSD Foundation
- Use Xr to reference other manual pages.
- Reference execve(2) instead of exec(2) as exec(2) does not exist.
- Remove the deprecated "Tn" macro.
- Improve the formatting of the etime description.
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17780
check to only set it for emulators as the CPU list may be changed when
the emulator starts. Until this is working just always set it.
Sponsored by: DARPA, AFRL
while probing for drives, use int13 extended info before standard one and
provide workaround for case we are not getting needed information in case
of floppy drive.
In case of INT13 errors, there are (at least) 3 error codes appearing in case
of missin media - 20h, 31h and 80h. Flag the no media and do not print an
error.
Differential Revision: https://reviews.freebsd.org/D17667
This takes advantage of two recents changes to makesyscalls.sh:
r328598: Permit a range of syscall numbers for UNIMPL
r339624: Remove the need for backslashes in syscalls.master
Syscall declerations are now split across multiple lines with the
syscall name and variables each on seperate lines (with an exception for
syscalls taking no arguments.)
Reviewed by: imp
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17706
Enabling BSD_CRTBEGIN on amd64 resulted in
error: unused variable '__CTOR_LIST__'.
__CTOR_LIST__ is indeed unused in crtbegin.c; it marks the beginning of
the .ctors array and is used in crtend.c. Annotate __DTOR_LIST__ as
well for consistency.
Discussed with: andrew
MFC with: r339738
Sponsored by: The FreeBSD Foundation
Also, link to the homepage of the BSSSD project, which developed the
original driver.
Reviewed by: bcr, kevans
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17608
the early pmap_mapbios/unmapbios code. It is even worse when there are
multiple L2 entries to handle as we would need to iterate over all pages.
Sponsored by: DARPA, AFRL
This will no work when there is no cc in $PATH (which is the case before the
cross-tools stage once we no longer inherit $PATH in $WMAKE).
The variables set by bsd.compiler.mk/bsd.linker.mk are not needed in these
stages so this avoids a little bit of makefile parsing.
Reviewed By: emaste
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D16814
It appears to be responsible for random segfaults observed when lots
of paging activity is taking place, but the root cause is not yet
understood.
Requested by: alc
MFC after: now
I erroneously thought that it was two 64bit platforms which use link_elf_obj.c.
PR: 228854
Reported by: ci.f.o.
MFC after: 3 days
X-MFC with: r339931
Pointyhat to: bz
we fail during module load because the pcpu or vnet module sections are
full. We did return a proper error but not leaving any indication to
the user as to what the actual problem was.
Even worse, on 12/13 currently we are seeing an unrelated error (ENOSYS
instead of ENOSPC, which gets skipped over in kern_linker.c) to be
printed which made problem diagnostics even harder.
PR: 228854
MFC after: 3 days
VIMAGE, and feature richness and global state increasing the 8k of
vnet module space are no longer sufficient for people and loading
multiple modules, e.g., pf(4) and ipl(4) or ipsec(4) will fail on
the second module.
Increase the module space to 8 * PAGE_SIZE which should be enough
to hold multiple firewalls, ipsec, multicast (as in the old days was
a problem), epair, carp, and any kind of other vnet enabled modules.
Sadly this is a global byte array part of the vnet_set, so we cannot
dynamically change its size; otherwise a TUNABLE would have been
a better solution.
PR: 228854
Reported by: Ernie Luzar, Marek Zarychta
Discussed with: rgrimes on current
MFC after: 3 days
This change defines the RA "6" (IPv6-Only) flag which routers
may advertise, kernel logic to check if all routers on a link
have the flag set and accordingly update a per-interface flag.
If all routers agree that it is an IPv6-only link, ether_output_frame(),
based on the interface flag, will filter out all ETHERTYPE_IP/ARP
frames, drop them, and return EAFNOSUPPORT to upper layers.
The change also updates ndp to show the "6" flag, ifconfig to
display the IPV6_ONLY nd6 flag if set, and rtadvd to allow
announcing the flag.
Further changes to tcpdump (contrib code) are availble and will
be upstreamed.
Tested the code (slightly earlier version) with 2 FreeBSD
IPv6 routers, a FreeBSD laptop on ethernet as well as wifi,
and with Win10 and OSX clients (which did not fall over with
the "6" flag set but not understood).
We may also want to (a) implement and RX filter, and (b) over
time enahnce user space to, say, stop dhclient from running
when the interface flag is set. Also we might want to start
IPv6 before IPv4 in the future.
All the code is hidden under the EXPERIMENTAL option and not
compiled by default as the draft is a work-in-progress and
we cannot rely on the fact that IANA will assign the bits
as requested by the draft and hence they may change.
Dear 6man, you have running code.
Discussed with: Bob Hinden, Brian E Carpenter
Remove malloc_domain(9) and most other _domain KPIs added in r327900.
The new functions allow the caller to specify a general NUMA domain
selection policy, rather than specifically requesting an allocation from
a specific domain. The latter policy tends to interact poorly with
M_WAITOK, resulting in situations where a caller is blocked indefinitely
because the specified domain is depleted. Most existing consumers of
the _domain KPIs are converted to instead use a DOMAINSET_PREF() policy,
in which we fall back to other domains to satisfy the allocation
request.
This change also defines a set of DOMAINSET_FIXED() policies, which
only permit allocations from the specified domain.
Discussed with: gallatin, jeff
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17418
- In uma_prealloc(), we need to check for an empty domain before the
first allocation attempt, not after. Fix this by switching
uma_prealloc() to use a vm_domainset iterator, which addresses the
secondary issue of using a signed domain identifier in round-robin
iteration.
- Don't automatically create a page daemon for domain 0.
- In domainset_empty_vm(), recompute ds_cnt and ds_order after
excluding empty domains; otherwise we may frequently specify an empty
domain when calling in to the page allocator, wasting CPU time.
Convert DOMAINSET_PREF() policies for empty domains to round-robin.
- When freeing bootstrap pages, don't count them towards the per-domain
total page counts for now: some vm_phys segments are created before
the SRAT is parsed and are thus always identified as being in domain 0
even when they are not. Then, when bootstrap pages are freed, they
are added to a domain that we had previously thought was empty. Until
this is corrected, we simply exclude them from the per-domain page
count.
Reported and tested by: Rajesh Kumar <rajfbsd@gmail.com>
Reviewed by: gallatin
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17704
In the last decade(s) we have seen both short term or long term projects
committed to the tree which were considered or even marked "experimental".
While out-of-tree development has become easier than it used to be in
CVS times, there still is a need to have the code shipping with HEAD but
not enabled by default.
While people may think about VIMAGE as one of the recent larger, long term
projects, early protocol implementations (before they are standardised)
are others. (Free)BSD historically was one of the operating systems
which would have running code at early stages and help develop and
influence standardisation and the industry.
Give developers an opportunity to be more pro-active for early adoption
or running large scale code changes stumbling over each others but not
the user's feet. I have not added the option to NOTES in order to avoid
breaking supported option builds, which require constant compile testing.
Discussed with: people in the corridor
> Remove doaccess variable and access(2) call since this interfers with
> applications like zdump(8) because pledge(2) doesn't allow access(2) to
> /usr/share/zoneinfo.
>
> millert@ better described why this call can go away:
>
> "This looks like an attempt to do access checks based on the real uid instead
> of the effective uid. Basically for setuid programs we don't want to allow a
> user to set TZ to a path they should not be able to otherwise access.
>
> However, we already have a check for issetugid() above so I think the doaccess
> bits can just be removed and we can rely on open()."
>
> After discussion with tb@, deraadt@ and millert@, this was also OK'ed by them
Reviewed by: imp
Obtained from: OpenBSD
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17701
