One less non-trivial dependency of rtld on libc. Also,
amd64_set_fsbase() is to be converted to ifunc, which I do not want to
support inside rtld.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In particular, do it before the first call to allocate_initial_tls(),
which contains MD parts to set the initial thread' TLS pointer.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
With lld-generated binaries the first PT_LOAD will usually be a read-only
segment unless you pass --no-rosegment. For those binaries the textsize is
determined by the next PT_LOAD. To allow both LLD and bfd 2.17 binaries to
be parsed correctly use the end of the last PT_LOAD that is marked as
executable instead.
I noticed that the value was wrong while adding some debug prints for some rtld
changes for CHERI binaries. `obj->textsize` only seems to be used by PPC so the
effect is untested. However, the value before was definitely wrong and the new
result matches the phdrs.
Reviewed By: kib
Approved By: brooks (mentor)
Differential Revision: https://reviews.freebsd.org/D17117
Fix the issue with subtracting the TLS_TCB_SIZE too when we are trying to get
the 'where' in the R_PPC_TPREL32 case. At allocation time we added an offset
and the TLS_TCB_SIZE. This has to be subtracted as well.
Now all the issues reported are fixed. Tests were done on G4 and G5 PowerMac's.
Additionally I ran the tls tests from the gcc test suite and made sure the
results are as good as pre 338486.
Thanks to tuexen for reporting the malfunction and for patient testing.
Also testing thanks goes to jhibbits.
Reported by: tuexen
Discussed with: jhibbits, nwhitehorn
Approved by: re (gjb)
Pointyhat to: andreast
This is based on the amd64 implementation. Support for both PLT and
non-PLT (e.g. a global variable initilised with a pointer to an ifunc)
cases are supported.
We don't pass anything to the resolver as it is expected they will read
the ID registers directly, with the number of registers with CPU info
likely to increase in the future.
Reviewed by: kib
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17341
search_library_path().
This corrects the scope of libmap matches.
Reported and tested by: Andreas Longwitz <longwitz@incore.de>
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
MFC after: 1 week
This is useful when lm_find() moves the match to the global mapping,
since lm_find() could be called with a same path more than once.
Reported and tested by: Andreas Longwitz <longwitz@incore.de>
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
MFC after: 1 week
some TLS bits. This broke operation on the PowerMac. Namely one could not login.
At login the screen/shell was giving back lots of backslashes and the login
shell dumped core.
The fix to this issue is to revert the powerpc commit from 338486 and to
increase the TLS_TCB_SIZE to 16.
Reverting only did not help, login was possible but userland applications
aborted with strange messages.
I tested this patch with world/kernel builds and with port upgrades.
Additionally a full gcc8 bootstrap was successfully completed.
Reviewed by: jhibbits@
Approved by: re (Glen)
The above commit fixed handling overaligned TLS segments in libc's
TLS Variant I implementation, but rtld provides its own implementation
for dynamically-linked executables which lacks these fixes. Thus,
port these changes to rtld.
This was previously commited as r337978 and reverted in r338149 due to
exposing a bug the ARM rtld. This bug was fixed in r338317 by mmel.
Submitted by: James Clarke
Approved by: re (kib)
Reviewed by: kbowling
Testing by: kbowling (powerpc64), br (riscv), kevans (armv7)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16510
TLS_TCB_SIZE is already accounted in defobj-> tlsoffset so all these symbols
were incorrectly relocated by +8.
Note:
The only consumer (for all binaries on my ARM board) of R_ARM_TLS_TPOFF32
relocation is _ThreadRuneLocale variable. And the incorrectly relocated
ThreadRuneLocale accidentally pointed to zeroed memory before memory layout
change from D16510 had changed status quo.
MFC after: 3 weeks
Reviewed by: imp, jhb
Approved by: re (marius)
Michal Meloun reports that it breaks ctype (isspace()..) related
functions on armv7 so back out while we diagnose the issue.
Reported by: Michal Meloun <melounmichal@gmail.com>
The above commit fixed handling overaligned TLS segments in libc's
TLS Variant I implementation, but rtld provides its own implementation
for dynamically-linked executables which lacks these fixes. Thus,
port these changes to rtld.
Submitted by: James Clarke
Reviewed by: kbowling
Testing byL kbowling (powerpc64), br (riscv), kevans (armv7)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16510
While here fix capitalization of a few nearby strings, add the
rtld's file name prefix so it's obvious where the message come
from, and return zero when "-h" is used.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16530
objects' init functions instead of doing the setup via a constructor
in libc as the init functions may already depend on these handlers
to be in place. This gets us rid of:
- the undefined order in which libc constructors as __guard_setup()
and jemalloc_constructor() are executed WRT __sparc_utrap_setup(),
- the requirement to link libc last so __sparc_utrap_setup() gets
called prior to constructors in other libraries (see r122883).
For static binaries, crt1.o still sets up the user trap handlers.
o Move misplaced prototypes for MD functions in to the MD prototype
section of rtld.h.
o Sprinkle nitems().
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The old value was probably fine back in 1998, when that code was imported
(although the comments still mention VAX, which was quite obsolete by then);
now, however, it's too small to handle our libc, which results in some
additional calls to munmap/mmap later on. Asking for more virtual address
space is virtually free, and syscalls are not, thus the change.
It was suggested by kib@ that this might be a symptom of a deeper problem.
It doesn't only affect libc, though - the change also improves rtld memory
management for eg KDE libraries. I guess it's just a natural bloat.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12834
The directives I added in r323466 and r323501 did not define a valid
CFA until several instructions into the associated functions. This
triggers an assertion in GDB when generating a stack trace while
stopped at the first instruction of PLT stub entry point since there
is no valid CFA rule for the first instruction.
This is probably just wrong on my part as the non-simple .cfi_startproc
would have defined a valid CFA. Instead, define a valid CFA as sp + 0
at the start of the functions and then use .cfa_def_offset to change the
offset when sp is adjusted later in the function.
Sponsored by: DARPA / AFRL
This is only cosmetic, but the entry point for rtld is not a leaf function,
and this avoids two .frame directives for rtld_start.
Sponsored by: DARPA / AFRL
This removes the need to call munmap(2) afterwards.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12767
Newer binutils supports extensions to the MIPS ABI for non-PIC code
that is used when compiling O32 binaries with clang 5 (but not used
for N64 oddly enough). These extensions require support for
R_MIPS_COPY relocations as well as a second PLT GOT using
R_MIPS_JUMP_SLOT relocations.
For R_MIPS_COPY, use the same approach as on other architectures where
fixups are deferred to the MD do_copy_relocations.
The additional PLT GOT for jump slots is located in a .got.plt section
which is identified by a DT_MIPS_PLTGOT dynamic entry. This GOT also
requires fixups for the first two GOT entries just as the normal GOT.
However, the entry point for this second GOT uses a different calling
convention. Rather than passing an offset into the GOT, it passes an
offset into the .rel.plt section. This requires a second entry point
(_rtld_pltbind_start) which calls the normal _rtld_bind() rather than
_mips_rtld_bind(). This also means providing a real version of
reloc_jmpslot() which is used by _rtld_bind().
In addition, add real implementions of reloc_plt() and
reloc_jmpslots() which walk .rel.plt handling R_MIPS_JUMP_SLOT
relocations.
Reviewed by: kib
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D12326
On hard-float 32-bit arm platforms, always search for the soft float
binaries in the alternative locations.
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D12274
MFC After: 1 week
In particular, the switch statement on the type of dynamic entries
in _rtld_relocate_nonplt_self() needs to not use a jump table since
jump tables on MIPS use local GOT entries which aren't initialized
until after this loop.
Suggested by: arichardson
Reviewed by: emaste
Sponsored by: DARPA / AFRL
Non-tests/... changes:
- Add HAS_TESTS= to Makefiles with libraries and programs to enable iteration
and propagate the appropriate environment down to *.test.mk.
tests/... changes:
- Add appropriate support Makefile.inc's to set HAS_TESTS in a minimal manner,
since tests/... is a special subdirectory tree compared to the others.
MFC after: 2 months
MFC with: r322511
Reviewed by: arch (silence), testing (silence)
Differential Revision: D12014
New version is not compatible on supervisor mode with v1.9.1
(previous version).
Highlights:
o BBL (Berkeley Boot Loader) provides no initial page tables
anymore allowing us to choose VM, to build page tables manually
and enable MMU in S-mode.
o SBI interface changed.
o GENERIC kernel.
FDT is now chosen standard for RISC-V hardware description.
DTB is now provided by Spike (golden model simulator). This
allows us to introduce GENERIC kernel. However, description
for console and timer devices is not provided in DTB, so move
these devices temporary to nexus bus.
o Supervisor can't access userspace by default. Solution is to
set SUM (permit Supervisor User Memory access) bit in sstatus
register.
o Compressed extension is now turned on by default.
o External GCC 7.1 compiler used.
o _gp renamed to __global_pointer$
o Compiler -march= string is now in use allowing us to choose
required extensions (compressed, FPU, atomic, etc).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11800
o Replace __riscv64 with (__riscv && __riscv_xlen == 64)
This is required to support new GCC 7.1 compiler.
This is compatible with current GCC 6.1 compiler.
RISC-V is extensible ISA and the idea here is to have built-in define
per each extension, so together with __riscv we will have some subset
of these as well (depending on -march string passed to compiler):
__riscv_compressed
__riscv_atomic
__riscv_mul
__riscv_div
__riscv_muldiv
__riscv_fdiv
__riscv_fsqrt
__riscv_float_abi_soft
__riscv_float_abi_single
__riscv_float_abi_double
__riscv_cmodel_medlow
__riscv_cmodel_medany
__riscv_cmodel_pic
__riscv_xlen
Reviewed by: ngie
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11901
directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
