Marius Strobl
6882cb0c9f
Correct spelling in comments.
...
Submitted by: brucec
2011-04-22 09:22:27 +00:00
Pyun YongHyeon
a8924cde73
Correct definition of T2 mode bit of MRBE Message Page 5 Next Page
...
Control Register.
2010-09-08 21:08:54 +00:00
Pyun YongHyeon
a64ee4e18f
Consistently use tab characters instead of tab + space characters.
...
No functional changes.
2010-09-07 23:08:38 +00:00
Pyun YongHyeon
beab55bfc5
Remove trailing CR at EOL.
2010-09-07 22:44:29 +00:00
David Christensen
b249ff39a4
- Added support for 5709S/5716S PHYs.
...
Submitted by: pyunyh
MFC after: 2 weeks
2010-03-18 20:57:57 +00:00
John Baldwin
38cc658ff6
Add support for the BCM5906[M] adapters. These adapters only support
...
10/100 operation and place the mailbox registers at a different offset.
They also do not have an EEPROM, so the MAC address must be read from
NVRAM instead.
MFC after: 1 month
PR: kern/118975
Submitted by: benjsc, Thomas Nyström thn at saeab dot se
Submitted by: sephe (original patch for DragonflyBSD)
2008-04-29 19:47:13 +00:00
David Christensen
7656f58e1c
New features:
...
- Moved BCM5706S/5708S SerDes support to brgphy (since they are not technically
TBI interfaces)
- Added 2.5G support for BCM5708S
Comments:
Since this driver is shared with bge I tested several available controllers
supported by bge and all worked as expected, however the list was not
exhaustive. Need wider testing.
MFC after: 4 weeks
2007-06-07 02:21:38 +00:00
Jung-uk Kim
5033133005
Fix typos in comments while I am here.
2007-02-13 00:34:32 +00:00
Jung-uk Kim
797b2220ae
Fix style(9).
...
Pointed out by: many
2007-02-12 23:33:05 +00:00
Jung-uk Kim
08bf8bb7c1
Add PHY DSP code for BCM5755M.
...
Obtained from: OpenBSD
2007-02-12 22:51:25 +00:00
Warner Losh
098ca2bda9
Start each of the license/copyright comments with /*-, minor shuffle of lines
2005-01-06 01:43:34 +00:00
Paul Saab
fe5c322931
Fix bge at 10Mbit. The defines for 10-Half and 10-Full were swapped.
...
Shamed into fixing by: John Cagle <john.cagle@hp.com>
2003-06-17 15:02:28 +00:00
Bill Paul
245dd946e3
Fix typo: BGGPHY -> BRGPHY in one of the #defines I added the other day.
2001-09-27 17:32:49 +00:00
Bill Paul
9aa35f2391
Add some definitions for the DSP programming registers in the BCM5400
...
and BCM5401 PHYs.
2001-09-25 16:41:56 +00:00
Bill Paul
e1968a0d2f
Add support for the BCM5401 and BCM5411 10/100/1000Mbps copper gigE PHYs.
...
This basically updates the brgphy driver to support 10/100 modes in
addition to 1000Mbps modes.
2001-09-04 22:00:33 +00:00
Bill Paul
c0d7d4d45b
Add PHY drivers for the XMAC II's internal PHY and the Broadcom BCM5400
...
1000baseTX PHY. These will be used by the SysKonnect gigabit ethernet
driver shortly.
2000-04-22 01:58:18 +00:00
