Later gcc and clang have deprecated =v (which maps to a specific temp
register) and instead we should just use =r to have the assembler
(hopefully!) save/restore things appropriately after choosing
a register.
Tested:
* AR9344 SoC, with userreg support
* AR9331 SoC, with no userreg support
Sponsored by: Sponsored by: DARPA, AFRL (MIPS TLS user register work)
Fix PC_REGS() so that printing of instructions works in some useful
cases. ddb only understands a single flat address space, but this
macro allows mapping $cs:$eip into vm86's flat address space well
enough for the MI parts of ddb. This doesn't work for the MD parts
that do stack traces, and there are no similar macros for data addresses.
PC_REGS() has to use the trapframe pointer instead of the pcb for this.
For other CPUs, the trapframe pointer is not available except by tracing
back to it. But tracing back through vm86 trapframes is broken even
starting with one.
It was remarkably hard to trace all current threads. "show pcpu" only
showed the pid, and there was nothing (?) better than searching ps output
to find the tids on CPUs. This change simplifies the search, but you
still have to trace the tid for each CPU manually.
the fixed-width numeric field 'wchan', as in ps(1). They were sort
of centered, although the template shows 'state' as right-justified.
The `wmesg' field very rarely has a prefix of '*' (for lock names)
that is still to the left of the header, and the width of this field
is reduced from 8 to 7 (more than 6 is an error).
The 'wmesg' and 'wchan' fields are still misnamed and poorly handled.
They are named sort of backwards relative to ps(1):
- wmesg in ddb = mwchan in ps
- wmesg in ddb = wchan in ps (if it is a wait channel name, not a lock name)
- wchan in ddb = nwchan in ps
ddb ps wastes lots of space for the unimportant 'wchan' field (20
columns altogether on 64-bit arches). ps(1) documents using a
compressed format, but the compression only omits leading nybbles of
0 so it has neveqr worked on arches that put the kernel in the top half
of the address space. It just avoids wasting space for an 0x prefix.
single stepping of multiple instructions (e.g., s/p,<count> and n/p).
db_print_loc_and_inst() already prints a newline on all arches although
it probably shouldn't.
Especially on SMP systems, single stepping tends to deadlock or panic
too quickly to be useful for anything except finding bugs in itself,
but with printing "itself" includes console drivers so it is useful
for generating stress tests for console drivers.
Sync libarchive with vendor including three security fixes
Vendor issues fixed:
Issue #744: Very long pathnames evade symlink checks
Issue #748: libarchive can compress, but cannot decompress zip some files
PR #750: ustar: fix out of bounds read on empty string ("") filename
PR #755: fix use of acl_get_flagset_np() on FreeBSD
MFC after: 3 days
mpc85xx_map_dcsr() returns a vm_offset_t, not an error code.
mpc85xx_fix_errata() will gracefully exit if mpc85xx_map_dcsr() returns 0, as
that indicates an error (NULL pointer).
__syncicache() only syncs the icache on the current CPU, it doesn't touch the
cache on any other core. Replace the call with cpu_flush_dcache() instead.
Since bp_kernload is not touched again by the boot CPU in this code path, dcbf
is no less efficient than the dcbst from __syncicache() by invalidating the
cache line.
Vendor issues fixed:
Issue #744: Very long pathnames evade symlink checks
Issue #748: libarchive can compress, but cannot decompress zip some files
PR #750: ustar: fix out of bounds read on empty string ("") filename
PR #755: fix use of acl_get_flagset_np() on FreeBSD
add the new "-d" flag from D1626.
The man page will be updated in a subsequent commit.
Submitted by: will (earlier version)
Reviewed by: ken
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D1626
Summary:
There is often a need at the debugger to print arbitrary special
purpose registers (SPRs) on PowerPC. Using a rewritable asm stub, print any SPR
provided on the command line.
Note, as there is no checking in this, attempting to print a nonexistent SPR
may cause a Program exception (illegal instruction, or boundedly undefined).
Note also that this relies on the kernel text pages being writable. If in the
future this is made not the case, this will need to be reworked.
Test Plan:
Printing the Processor Version Register (PVR, SPR 287):
db> show spr 11f
SPR 287(11f): 80240012
Differential Revision: https://reviews.freebsd.org/D7403
incorrect from the error cases in exec_map_first_page(). They are
unnecessary because we automatically unbusy the page in vm_page_free()
when we remove it from the object. The calls are incorrect because they
happen after the page is freed, so we might actually unbusy the page
after it has been reallocated to a different object. (This error was
introduced in r292373.)
Reviewed by: kib
MFC after: 1 week
Summary:
u-boot, following the ePAPR specification, puts secondary cores into a
spinloop at boot, rather than leaving them shut off. It then relies on the host
OS to write the correct values to a special spin table, located in coherent
memory (on newer implementations), or noncoherent memory (older
implementations).
This supports both implementations of ePAPR, as well as continuing to support
non-ePAPR booting, by first attempting to use the spintable, and falling back to
expecting non-started CPUs.
Test Plan:
Booted on a P5020 board. Tested before and after the changes.
Before the changes, prints the error "SMP: CPU 1 already out of hold-off state!"
and panics shortly thereafter. After the changes, same boot method lets it
complete boot.
Reviewed by: nwhitehorn
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D7494
The module works together with ipfw(4) and implemented as its external
action module.
Stateless NAT64 registers external action with name nat64stl. This
keyword should be used to create NAT64 instance and to address this
instance in rules. Stateless NAT64 uses two lookup tables with mapped
IPv4->IPv6 and IPv6->IPv4 addresses to perform translation.
A configuration of instance should looks like this:
1. Create lookup tables:
# ipfw table T46 create type addr valtype ipv6
# ipfw table T64 create type addr valtype ipv4
2. Fill T46 and T64 tables.
3. Add rule to allow neighbor solicitation and advertisement:
# ipfw add allow icmp6 from any to any icmp6types 135,136
4. Create NAT64 instance:
# ipfw nat64stl NAT create table4 T46 table6 T64
5. Add rules that matches the traffic:
# ipfw add nat64stl NAT ip from any to table(T46)
# ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96
6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
via NAT64 host.
Stateful NAT64 registers external action with name nat64lsn. The only
one option required to create nat64lsn instance - prefix4. It defines
the pool of IPv4 addresses used for translation.
A configuration of instance should looks like this:
1. Add rule to allow neighbor solicitation and advertisement:
# ipfw add allow icmp6 from any to any icmp6types 135,136
2. Create NAT64 instance:
# ipfw nat64lsn NAT create prefix4 A.B.C.D/28
3. Add rules that matches the traffic:
# ipfw add nat64lsn NAT ip from any to A.B.C.D/28
# ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96
4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
via NAT64 host.
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6434
While CLDR brings us a good and up to date source data to generate locales for
all databses we are using for locales, it is not the case of LC_TIME. Where it
does not defines the informations we need.
Put back all the date and time formats from the old locales.
Make it statically for now (in order to be able to merge it now into
11.0-RELEASE). The generation tools will be updated soon.
That gives us time to properly work on LC_TIME during the 12 timeframe.
While here fix abbreviated month for af_ZA (which are already fixed in CLDR
data upstream)
In locales where AP/PM was not defined before CLDR data, remove again the AP/PM
informations
For locales where AP/PM was defined before CLDR data, keep the CLDR information
which was properly translated.
MFC after: 3 days
ipfw_objhash_lookup_table_kidx does lookup kernel index of table;
ipfw_ref_table/ipfw_unref_table takes and releases reference to table.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
* make interface cloner VNET-aware;
* simplify cloner code and use if_clone_simple();
* migrate LOGIF_LOCK() to rmlock;
* add ipfw_bpf_mtap2() function to pass mbuf to BPF;
* introduce new additional ipfwlog0 pseudo interface. It differs from
ipfw0 by DLT type used in bpfattach. This interface is intended to
used by ipfw modules to dump packets with additional info attached.
Currently pflog format is used. ipfw_bpf_mtap2() function uses second
argument to determine which interface use for dumping. If dlen is equal
to ETHER_HDR_LEN it uses old ipfw0 interface, if dlen is equal to
PFLOG_HDRLEN - ipfwlog0 will be used.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Depending on the address family and ai_flags containing AI_V4MAPPED,
it might not do a proper DNS lookup on the provided DNS address
Convert some `ai` boolean true/false checks to NULL/non-NULL while here.
MFC after: 1 week
PR: 211790
Reported by: Herbie.Robinson@stratus.com
Sponsored by: EMC / Isilon Storage Division
On particular slow networks, it can (on average) take longer to
resolve hosts to IP* addresses. 20 minutes seemed reasonable for
my work network
This will be solved in a more meaningful way (if possible) using
concurrency in the near future
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
the patch in D1626 plus changes so that it includes counts for
NFSv4.1 (and the draft of NFSv4.2).
Also, make all the counts uint64_t and add a vers field at the
beginning, so that future revisions can easily be implemented.
There is code in place to handle the old vesion of the nfsstats
structure for backwards binary compatibility.
Subsequent commits will update nfsstat(8) to use the new fields.
Submitted by: will (earlier version)
Reviewed by: ken
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D1626
- Move group task queue into kern/subr_gtaskqueue.c
- Change intr_enable to return an int so it can be detected if it's not
implemented
- Allow different TX/RX queues per set to be different sizes
- Don't split up TX mbufs before transmit
- Allow a completion queue for TX as well as RX
- Pass the RX budget to isc_rxd_available() to allow an earlier return
and avoid multiple calls
Submitted by: shurd
Reviewed by: gallatin
Approved by: scottl
Differential Revision: https://reviews.freebsd.org/D7393
Some defines needed for exporting serial numbers from the SMBIOS were
missed during integration of SMBIOS support in the EFI boot loader (r281138).
This is needed for getting the hostid set from the system hardware UUID.
PR: 206031
Submitted by: Thomas Eberhardt <sneakywumpus@gmail.com>
MFC after: 1 week
These may have ccache in them or -target/--sysroot from external
compiler or SYSTEM_COMPILER support. Many ports do not support
a CC with spaces in it, such as emulators/virtualbox-ose-kmod.
Passing --sysroot to ports makes no sense as ports doesn't support
--sysroot currently.
If these variables need to be overridden for ports then they can
be set in make.conf or passed as make arguments.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
