Commit Graph

147 Commits

Author SHA1 Message Date
Emmanuel Vadot
2f88239958 dwmmc_rockchip: Add ifdefs on EXT_RESOURCES
The old RK3188 kernel config uses dwmmc but isn't compiled with EXT_RESOURCES.
Add ifdefs around code using EXT_RESOURCES code.

Reported by:	rpokala
2018-02-28 19:05:25 +00:00
Emmanuel Vadot
a5091e03c5 dwmmc_rockchip: Add support for rk3328-dw-mshc
* Do not use pio mode like rk2928
* Change clocks frequency in update_ios

Tested-On:    Pine64 Rock64 (RK3328)
2018-02-26 21:29:01 +00:00
Emmanuel Vadot
dd198e868a dwmmc: Add clock support and other improvements
* If compiled with EXT_RESOURCES look up the "biu" and "ciu" clocks in
  the DT
* Don't use custom property "bus-frequency" but the standard one
  "clock-frequency"
* Use the DT property max-frequency and fall back to 200Mhz if it don't exists
* Add more mmc caps suported by the controller
* Always ack all interrupts
* Subclassed driver can supply an update_ios so they can handle update
  the clocks accordingly
* Take care of the DDR bit in update_ios (no functional change since we
  do not support voltage change for now)
* Make use of the FDT bus-width property
2018-02-26 21:27:42 +00:00
Marius Strobl
9007ed84d6 Use the correct revision specifier (EXT_CSD revision rather than
system specification version) for deciding whether the EXT_CSD
register includes the EXT_CSD_GEN_CMD6_TIME field.

Submitted by:	Masanobu SAITOH
2018-01-13 17:36:11 +00:00
Marius Strobl
61ef738d5e Fix a bug introduced in r327355; in mmcsd_ioctl_cmd() when ensuring
that userland doesn't switch partitions on its own, compare against
the partition mmcsd_ioctl_cmd() is going to switch to (based on the
device node used) rather than the currently selected partition.
2018-01-13 16:32:09 +00:00
Emmanuel Vadot
a4cafeb098 dwmmc_hisi: Fix build when option MMCCAM is defined 2018-01-13 14:10:45 +00:00
Emmanuel Vadot
74e0613ead dwmmc: Fully subclass driver
Fully subclass the dwmmc driver and split every driver into multiple files.

There is still a few quirks in the dwmmc driver that will need some work.

Tested On: Pine64 Rock64

Differential Revision:	https://reviews.freebsd.org/D13615
2017-12-30 22:01:17 +00:00
Marius Strobl
6c06949f41 - Don't allow userland to switch partitions; it's next to impossible
to recover from that, especially when something goes wrong.
- When userland changes EXT_CSD, update the kernel copy before using
  relevant EXT_CSD bits in mmcsd_switch_part().
2017-12-29 19:07:50 +00:00
Alexander Kabaev
151ba7933a Do pass removing some write-only variables from the kernel.
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.

Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
2017-12-25 04:48:39 +00:00
Pedro F. Giffuni
718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
Marius Strobl
da979d442a Correct an inverted conditional for determining the multiplier of
the user data area size.
2017-10-19 21:57:14 +00:00
Ilya Bakulin
02c474b481 Miscellaneous fixes and improvements to MMCCAM stack
* Demote the level of several debug messages to CAM_DEBUG_TRACE
 * Add detection for SDHC cards that can do 1.8V. No voltage switch sequence
   is issued yet;
 * Don't create a separate LUN for each SDIO function. We need just one to make
   pass(4) attach;
 * Remove obsolete mmc_sdio* files. SDIO functionality will be moved into the
   separate device that will manage a new sdio(4) bus;
 * Terminate probing if got no reply to CMD0;
 * Make bcm2835 SDHCI host controller driver compile with 'option MMCCAM'.

Approved by:	imp (mentor)
Differential Revision:	https://reviews.freebsd.org/D12109
2017-09-15 19:47:44 +00:00
Marius Strobl
79f39c6aa1 - If available, use TRIM instead of ERASE for implementing BIO_DELETE.
This also involves adding a quirk table as TRIM is broken for some
  Kingston eMMC devices, though. Compared to ERASE (declared "legacy"
  in the eMMC specification v5.1), TRIM has the advantage of operating
  on write sectors rather than on erase sectors, which typically are
  of a much larger size. Thus, employing TRIM, we don't need to fiddle
  with coalescing BIO_DELETE requests that are also of (write) sector
  units into erase sectors, which might not even add up in all cases.
- For some SanDisk iNAND devices, the CMD38 argument, e. g. ERASE,
  TRIM etc., has to be specified via EXT_CSD[113], which now is also
  handled via a quirk.
- My initial understanding was that for eMMC partitions, the granularity
  should be used as erase sector size, e. g. 128 KB for boot partitions.
  However, rereading the relevant parts of the eMMC specification v5.1,
  this isn't actually correct. So drop the code which used partition
  granularities for delmaxsize and stripesize. For the most part, this
  change is a NOP, though, because a) for ERASE, mmcsd_delete() used
  the erase sector size unconditionally for all partitions anyway and
  b) g_disk_limit() doesn't actually take the stripesize into account.
- Take some more advantage of mmcsd_errmsg() in mmcsd(4) for making
  error codes human readable.
2017-08-07 23:33:05 +00:00
Marius Strobl
cd85acba1a - Correct the remainder of confusing and error prone mix-ups between
"br" or "bridge" where - according to the terminology outlined in
  comments of bridge.h and mmcbr_if.m  around since their addition in
  r163516 - the bus is meant and used instead. Some of these instances
  are also rather old, while those in e. g. mmc_subr.c are as new as
  r315430 and were caused by choosing mmc_wait_for_request(), i. e. the
  one pre-r315430 outliner existing in mmc.c, as template for function
  parameters in mmc_subr.c inadvertently. This correction translates to
  renaming "brdev" to "busdev" and "mmcbr" to "mmcbus" respectively as
  appropriate.
  While at it, also rename "reqdev" to just "dev" in mmc_subr.[c,h]
  for consistency with was already used in mmm.c pre-r315430, again
  modulo mmc_wait_for_request() that is.
- Remove comment lines from bridge.h incorrectly suggesting that there
  would be a MMC bridge base class driver.
- Update comments in bridge.h regarding the star topology of SD and SDIO;
  since version 3.00 of the SDHCI specification, for eSD and eSDIO bus
  topologies are actually possible in form of so called "shared buses"
  (in some subcontext later on renamed to "embedded" buses).
2017-08-02 21:11:51 +00:00
Marius Strobl
7a777659ff Correctly use the size of a pointer rather than that of a pointer to a
pointer.

Reported by:	Coverity
CID:		1378432
2017-07-26 21:59:37 +00:00
Marius Strobl
21794534db Improve the clarity of a comment added in r321385 by not referring to
volatile SDHCI specification lingo.
2017-07-25 20:36:44 +00:00
Marius Strobl
aca38eab8a o Add support for eMMC HS200 and HS400 bus speed modes at 200 MHz to
sdhci(4), mmc(4) and mmcsd(4). For the most part, this consists of:
  - Correcting and extending the infrastructure for negotiating and
    enabling post-DDR52 modes already added as part of r315598. In
    fact, HS400ES now should work as well but hasn't been activated
    due to lack of corresponding hardware.
  - Adding support executing standard SDHCI initial tuning as well
    as re-tuning as required for eMMC HS200/HS400 and the fast UHS-I
    SD card modes. Currently, corresponding methods are only hooked
    up to the ACPI and PCI front-ends of sdhci(4), though. Moreover,
    sdhci(4) won't offer any modes requiring (re-)tuning to the MMC/SD
    layer in order to not break operations with other sdhci(4) front-
    ends. Likewise, sdhci(4) now no longer offers modes requiring the
    set_uhs_timing method introduced in r315598 to be implemented/
    hooked up (previously, this method was used with DDR52 only, which
    in turn is only available with Intel controllers so far, i. e. no
    such limitation was necessary before). Similarly for 1.2/1.8 V VCCQ
    support and the switch_vccq method.
  - Addition of locking to the IOCTL half of mmcsd(4) to prevent races
    with detachment and suspension, especially since it's required to
    immediately switch away from RPMB partitions again after an access
    to these (so re-tuning can take place anew, given that the current
    eMMC specification v5.1 doesn't allow tuning commands to be issued
    with a RPMB partition selected). Therefore, the existing part_mtx
    lock in the mmcsd(4) softc is additionally renamed to disk_mtx in
    order to denote that it only refers to the disk(9) half, likewise
    for corresponding macros.

  On the system where the addition of DDR52 support increased the read
  throughput to ~80 MB/s (from ~45 MB/s at high speed), HS200 yields
  ~154 MB/s and HS400 ~187 MB/s, i. e. performance now has more than
  quadrupled compared to pre-r315598.

  Also, with the advent of (re-)tuning support, most infrastructure
  necessary for SD card UHS-I modes up to SDR104 now is also in place.
  Note, though, that the standard SDHCI way of (re-)tuning is special
  in several ways, which also is why sending the actual tuning requests
  to the device is part of sdhci(4). SDHCI implementations not following
  the specification, MMC and non-SDHCI SD card controllers likely will
  use a generic implementation in the MMC/SD layer for executing tuning,
  which hasn't been written so far, though.

  However, in fact this isn't a feature-only change; there are boards
  based on Intel Bay Trail where DDR52 is problematic and the suggested
  workaround is to use HS200 mode instead. So far exact details are
  unknown, however, i. e. whether that's due to a defect in these SoCs
  or on the boards.

  Moreover, due to the above changes requiring to be aware of possible
  MMC siblings in the fast path of mmc(4), corresponding information
  now is cached in mmc_softc. As a side-effect, mmc_calculate_clock(),
  mmc_delete_cards(), mmc_discover_cards() and mmc_rescan_cards() now
  all are guaranteed to operate on the same set of devices as there no
  longer is any use of device_get_children(9), which can fail in low
  memory situations. Likewise, mmc_calculate_clock() now longer will
  trigger a panic due to the latter.

o Fix a bug in the failure reporting of mmcsd_delete(); in case of an
  error when the starting block of a previously stored erase request
  is used (in order to be able to erase a full erase sector worth of
  data), the starting block of the newly supplied bio_pblkno has to be
  returned for indicating no progress. Otherwise, upper layers might
  be told that a negative number of BIOs have been completed, leading
  to a panic.

o Fix 2 bugs on resume:
  - Things done in fork1(9) like the acquisition of an SX lock or the
    sleepable memory allocation are incompatible with a MTX_DEF taken.
    Thus, mmcsd_resume() must not call kproc_create(9), which in turn
    uses fork1(9), with the disk_mtx (formerly part_mtx) held.
  - In mmc_suspend(), the bus is powered down, which in the typical
    case of a device being selected at the time of suspension, causes
    the device deselection as part of the bus acquisition by mmc(4) in
    mmc_scan() to fail as the bus isn't powered up again before later
    in mmc_go_discovery(). Thus, power down with the bus acquired in
    mmc_suspend(), which will trigger the deselection up-front.

o Fix a memory leak in mmcsd_ioctl() in case copyin(9) fails. [1]

o Fix missing variable initialization in mmc_switch_status(). [2]

o Fix R1_SWITCH_ERROR detection in mmc_switch_status(). [3]

o Handle the case of device_add_child(9) failing, for example due to
  a memory shortage, gracefully in mmc(4) and sdhci(4), including not
  leaking memory for the instance variables in case of mmc(4) (which
  might or might not fix [4] as the latter problem has been discovered
  independently).

o Handle the case of an unknown SD CSD version in mmc_decode_csd_sd()
  gracefully instead of calling panic(9).

o Again, check and handle the return values of some additional function
  calls in mmc(4) instead of assuming that everything went right or mark
  non-fatal errors by casting the return value to void.

o Correct a typo in the Linux IOCTL compatibility; it should have been
  MMC_IOC_MULTI_CMD rather than MMC_IOC_CMD_MULTI.

o Now that we are reaching ever faster speeds (more improvement in this
  regard is to be expected when adding ADMA support to sdhci(4)), apply
  a few micro-optimizations like predicting mmc(4) and sdhci(4) debugging
  to be off or caching erase sector and maximum data sizes as well support
  of block addressing in mmsd(4) (instead of doing 2 indirections on every
  read/write request for determining the maximum data size for example).

Reported by:	Coverity
CID:		1372612 [1], 1372624 [2], 1372594 [3], 1007069 [4]
2017-07-23 16:11:47 +00:00
Warner Losh
a94a63f0a6 An MMC/SD/SDIO stack using CAM
Implement the MMC/SD/SDIO protocol within a CAM framework. CAM's
flexible queueing will make it easier to write non-storage drivers
than the legacy stack. SDIO drivers from both the kernel and as
userland daemons are possible, though much of that functionality will
come later.

Some of the CAM integration isn't complete (there are sleeps in the
device probe state machine, for example), but those minor issues can
be improved in-tree more easily than out of tree and shouldn't gate
progress on other fronts. Appologies to reviews if specific items
have been overlooked.

Submitted by: Ilya Bakulin
Reviewed by: emaste, imp, mav, adrian, ian
Differential Review: https://reviews.freebsd.org/D4761

merge with first commit, various compile hacks.
2017-07-09 16:57:24 +00:00
Marius Strobl
0f34084f95 o Add support for eMMC DDR bus speed mode at 52 MHz to sdhci(4) and
mmc(4). For the most part, this consists of support for:
  - Switching the signal voltage (VCCQ) to 1.8 V or (if supported
    by the host controller) to 1.2 V,
  - setting the UHS mode as appropriate in the SDHCI_HOST_CONTROL2
    register,
  - setting the power class in the eMMC device according to the
    core supply voltage (VCC),
  - using different bits for enabling a bus width of 4 and 8 bits
    in the the eMMC device at DDR or higher timings respectively,
  - arbitrating timings faster than high speed if there actually
    are additional devices on the same MMC bus.

  Given that support for DDR52 is not denoted by SDHCI capability
  registers, availability of that timing is indicated by a new
  quirk SDHCI_QUIRK_MMC_DDR52 and only enabled for Intel SDHCI
  controllers so far. Generally, what it takes for a sdhci(4)
  front-end to enable support for DDR52 is to hook up the bridge
  method mmcbr_switch_vccq (which especially for 1.2 V signaling
  support is chip/board specific) and the sdhci_set_uhs_timing
  sdhci(4) method.

  As a side-effect, this change also fixes communication with
  some eMMC devices at SDR high speed mode with 52 MHz due to
  the signaling voltage and UHS bits in the SDHCI controller no
  longer being left in an inappropriate state.

  Compared to 52 MHz at SDR high speed which typically yields
  ~45 MB/s with the eMMC chips tested, throughput goes up to
  ~80 MB/s at DDR52.

  Additionally, this change already adds infrastructure and quite
  some code for modes up to HS400ES and SDR104 respectively (I did
  not want to add to much stuff at a time, though). Essentially,
  what is still missing in order to be able to activate support
  for these latter is is support for and handling of (re-)tuning.

o In sdhci(4), add two tunables hw.sdhci.quirk_clear as well as
  hw.sdhci.quirk_set, which (when hooked up in the front-end)
  allow to set/clear sdhci(4) quirks for debugging and testing
  purposes. However, especially for SDHCI controllers on the
  PCI bus which have no specific support code so far and, thus,
  are picked up as generic SDHCI controllers, hw.sdhci.quirk_set
  allows for setting the necessary quirks (if required).

o In mmc(4), check and handle the return values of some more
  function calls instead of assuming that everything went right.
  In case failures actually are not problematic, indicate that
  by casting the return value to void.

Reviewed by:	jmcneill
2017-03-19 23:27:17 +00:00
Marius Strobl
c11bbc7dab Again, fixes regarding style(4), to comments, includes and unused
parameters.
2017-03-17 22:57:37 +00:00
Marius Strobl
72dec0792a - Add support for eMMC "partitions". Besides the user data area, i. e.
the default partition, eMMC v4.41 and later devices can additionally
  provide up to:
  1 enhanced user data area partition
  2 boot partitions
  1 RPMB (Replay Protected Memory Block) partition
  4 general purpose partitions (optionally with a enhanced or extended
    attribute)

  Of these "partitions", only the enhanced user data area one actually
  slices the user data area partition and, thus, gets handled with the
  help of geom_flashmap(4). The other types of partitions have address
  space independent from the default partition and need to be switched
  to via CMD6 (SWITCH), i. e. constitute a set of additional "disks".

  The second kind of these "partitions" doesn't fit that well into the
  design of mmc(4) and mmcsd(4). I've decided to let mmcsd(4) hook all
  of these "partitions" up as disk(9)'s (except for the RPMB partition
  as it didn't seem to make much sense to be able to put a file-system
  there and may require authentication; therefore, RPMB partitions are
  solely accessible via the newly added IOCTL interface currently; see
  also below). This approach for one resulted in cleaner code. Second,
  it retains the notion of mmcsd(4) children corresponding to a single
  physical device each. With the addition of some layering violations,
  it also would have been possible for mmc(4) to add separate mmcsd(4)
  instances with one disk each for all of these "partitions", however.
  Still, both mmc(4) and mmcsd(4) share some common code now e. g. for
  issuing CMD6, which has been factored out into mmc_subr.c.

  Besides simply subdividing eMMC devices, some Intel NUCs having UEFI
  code in the boot partitions etc., another use case for the partition
  support is the activation of pseudo-SLC mode, which manufacturers of
  eMMC chips typically associate with the enhanced user data area and/
  or the enhanced attribute of general purpose partitions.

  CAVEAT EMPTOR: Partitioning eMMC devices is a one-time operation.

- Now that properly issuing CMD6 is crucial (so data isn't written to
  the wrong partition for example), make a step into the direction of
  correctly handling the timeout for these commands in the MMC layer.
  Also, do a SEND_STATUS when CMD6 is invoked with an R1B response as
  recommended by relevant specifications. However, quite some work is
  left to be done in this regard; all other R1B-type commands done by
  the MMC layer also should be followed by a SEND_STATUS (CMD13), the
  erase timeout calculations/handling as documented in specifications
  are entirely ignored so far, the MMC layer doesn't provide timeouts
  applicable up to the bridge drivers and at least sdhci(4) currently
  is hardcoding 1 s as timeout for all command types unconditionally.
  Let alone already available return codes often not being checked in
  the MMC layer ...

- Add an IOCTL interface to mmcsd(4); this is sufficiently compatible
  with Linux so that the GNU mmc-utils can be ported to and used with
  FreeBSD (note that due to the remaining deficiencies outlined above
  SANITIZE operations issued by/with `mmc` currently most likely will
  fail). These latter will be added to ports as sysutils/mmc-utils in
  a bit. Among others, the `mmc` tool of the GNU mmc-utils allows for
  partitioning eMMC devices (tested working).

- For devices following the eMMC specification v4.41 or later, year 0
  is 2013 rather than 1997; so correct this for assembling the device
  ID string properly.

- Let mmcsd.ko depend on mmc.ko. Additionally, bump MMC_VERSION as at
  least for some of the above a matching pair is required.

- In the ACPI front-end of sdhci(4) describe the Intel eMMC and SDXC
  controllers as such in order to match the PCI one.
  Additionally, in the entry for the 80860F14 SDXC controller remove
  the eMMC-only SDHCI_QUIRK_INTEL_POWER_UP_RESET.

OKed by:	imp
Submitted by:	ian (mmc_switch_status() implementation)
2017-03-16 22:23:04 +00:00
Marius Strobl
55dae242e6 Add and use a MMC_DECLARE_BRIDGE macro for declaring mmc(4) bridges
as kernel drivers and their dependency onto mmc(4); this allows for
incrementing the mmc(4) module version but also for entire omission
of these bridge declarations for mmccam(4) in a single place, i. e.
in dev/mmc/bridge.h.
2017-03-07 22:42:44 +00:00
Marius Strobl
b440e965da o Another round fixes for mmc(4), mmcsd(4) and sdhci(4) regarding
comments, marking unused parameters as such, style(9), whitespace,
  etc.
o In the mmc(4) bridges and sdhci(4) (bus) front-ends:
  - Remove redundant assignments of the default bus_generic_print_child
    device method (I've whipped these out of the tree as part of r227843
    once, but they keep coming back ...),
  - use DEVMETHOD_END,
  - use NULL instead of 0 for pointers.
o Trim/adjust includes.
2017-03-06 23:47:59 +00:00
Marius Strobl
7e6ccea3b1 Fix some more overly long lines, whitespace and other bugs according to
style(9) as well as spelling in comments.
2017-02-04 19:35:38 +00:00
Marius Strobl
1bacf3be8c Fix overly long lines, whitespace and other bugs according to style(9). 2017-01-29 00:05:49 +00:00
Conrad Meyer
db4fcadf52 "Buses" is the preferred plural of "bus"
Replace archaic "busses" with modern form "buses."

Intentionally excluded:
* Old/random drivers I didn't recognize
  * Old hardware in general
* Use of "busses" in code as identifiers

No functional change.

http://grammarist.com/spelling/buses-busses/

PR:		216099
Reported by:	bltsrc at mail.ru
Sponsored by:	Dell EMC Isilon
2017-01-15 17:54:01 +00:00
Alexander Motin
17160457b4 Report random flash storage as non-rotating to GEOM_DISK.
While doing it, introduce respective constants in geom_disk.h.

MFC after:	1 week
2017-01-12 08:53:10 +00:00
Marius Strobl
d119f637fc In mmcsd_task(), bio_resid was not being set to 0 on a successful read
or write, resulting in random short-read and short-write returns for
requests. Fixing this fixes nominal block I/O via mmcsd(4).

Obtained from:	DragonFlyBSD (fd4b97583be1a1e57234713c25f6e81bc0411cb0)
MFC after:	5 days
2017-01-09 17:05:39 +00:00
Conrad Meyer
0c6393a265 mmc: Accept even lower voltage for Cherryview
And HP x2 210, per DragonFlyBSD 240bd9cd58f8259c12c14a8006837e698.

Submitted by:	Johannes Lundberg <yohanesu75 at gmail.com>
No objection:	gonzo@
Obtained from:	DragonFlyBSD
2017-01-08 06:20:21 +00:00
Conrad Meyer
db6f80fd1c sdhci/mmc: Minor whitespace cleanups
No functional change.

Submitted by:	Johannes Lundberg <yohanesu75 at gmail.com>
2016-12-20 03:38:14 +00:00
Andrew Turner
f3ad8ea007 Add DMA sync operations around accessing the dwmmc descriptor ring. Even
with it maps as cache-coherent we still need to call bus_dmamap_sync.

Obtained from:	ABT Systems Ltd
Sponsored by:	The FreeBSD Foundation
2016-05-13 15:15:54 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Pedro F. Giffuni
057b4402bf sys/dev: extend use of the howmany() macro when available.
We have a howmany() macro in the <sys/param.h> header that is
convenient to re-use as it makes things easier to read.
2016-04-26 15:03:15 +00:00
Pedro F. Giffuni
74b8d63dcc Cleanup unnecessary semicolons from the kernel.
Found with devel/coccinelle.
2016-04-10 23:07:00 +00:00
Alexander Kabaev
6e0628d432 Use correct response bits for MMC_RSP_R4-R7 types 2016-03-27 23:19:21 +00:00
Ian Lepore
dec4873723 Fix fallout from r292180 (Dec 2015)... ensure that every driver which has
a DRIVER_MODULE() referencing mmc_driver has a MODULE_DEPEND() on mmc.  This
is because the kernel linker only searches for symbols in dependent modules,
so loading sdhci_pci (and other bus-flavors of sdhci) would fail when mmc
was not compiled into the kernel (even if you hand-loaded mmc first).

(Thanks to jilles@ for providing the vital clue about the kernel linker.)
2016-03-21 00:52:24 +00:00
Warner Losh
c55f57071a Create an API to reset a struct bio (g_reset_bio). This is mandatory
for all struct bio you get back from g_{new,alloc}_bio. Temporary
bios that you create on the stack or elsewhere should use this before
first use of the bio, and between uses of the bio. At the moment, it
is nothing more than a wrapper around bzero, but that may change in
the future. The wrapper also removes one place where we encode the
size of struct bio in the KBI.
2016-02-17 17:16:02 +00:00
Ian Lepore
6e081f10fc Flag sysctl hw.mmc.debug as a tunable, since often you want to debug the
bus probing during system startup.
2015-12-18 01:32:43 +00:00
Ian Lepore
3f62727443 Move the DRIVER_MODULE() statements that declare mmc(4) to be a child of
the various bridge drivers out of dev/mmc.c and into the bridge drivers.

Requested by:	   jhb (almost two years ago; better late than never)
2015-12-14 01:09:25 +00:00
Andrew Turner
c0e5e17237 Add support for the DesignWare MMC hardware in the HiSilicon hi6220. This
SoC is used in the HiKey board from 96boards.

Currently on the SD card is working on the HiKey, as such devices 0 and 2
will need to be disabled, for example by adding the following to
loader.conf:

hint.hisi_dwmmc.0.disabled=1
hint.hisi_dwmmc.2.disabled=1

Relnotes:	yes (Hikey board booting)
Sponsored by:	ABT Systems Ltd
2015-09-01 16:25:12 +00:00
Andrew Turner
fa6ea9962e Finish allowing the dwmmc driver to be subclassed, move the softc to a new
header, along with the hwtype enum, device attach prototype, and driver_t.

Sponsored by:	ABT Systems Ltd
2015-09-01 15:26:21 +00:00
Andrew Turner
0e308268b0 Remove an variable we only ever write to, and stop assigning 0 to values
in the softc as it's the default value. The latter helps with subclassing
this driver.

Sponsored by:	ABT Systems Ltd
2015-09-01 10:47:42 +00:00
Andrew Turner
755eb18fd7 Move dwmmc.h to dwmmc_reg.h. This is in preperation for adding support to
subclass the dwmmc driver to allow SoC specific attachments.

Sponsored by:	ABT Systems Ltd
2015-08-28 15:27:55 +00:00
Andrew Turner
725b72d5e0 Only check for the bus frequency if it has not already been set, for
example through a driver running as a subclass of this.

Sponsored by:	ABT Systems Ltd
2015-08-28 10:34:37 +00:00
Andrew Turner
2640322a2e There is no need to get the bus tag or handle.
Sponsored by:	ABT Systems Ltd
2015-08-27 16:27:51 +00:00
Andrew Turner
fd59e3a9d8 Limit the speed to the bus frequency.
Sponsored by:	ABT Systems Ltd
2015-08-27 16:24:30 +00:00
Andrew Turner
488d593a0c Allow the fifo-depth and num-slots to be missing. For the former we read
the value from the hardware, for the latter assume a single slot.

Sponsored by:	ABT Systems Ltd
2015-08-27 16:18:22 +00:00
Andrew Turner
26f0e89a6d Allow us to select the transfer count. This allows us to work with hardware
that seems to only work with a single block at a time.

Sponsored by:	ABT Systems Ltd
2015-08-27 13:08:45 +00:00
Justin Hibbits
5d6961b0dc Fix freescale sdhc driver, and add it to the files list.
Also, add it to the mmc DRIVER_MODULE attachment list.
2015-08-27 03:47:56 +00:00
Andrew Turner
4f768055bd Only access the Samsung registers when targeting Samsung hardware.
Sponsored by:	ABT Systems Ltd
2015-08-26 10:54:14 +00:00