This paves way for the further cleanup/disentangle.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7092
This avoids bunch of unnecessary checks on hot path and simplifies the
channel processing.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7085
This paves way to nuke the hv_device, which is actually an unncessary
indirection.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7032
This makes life easier during the transition period to nuke the hv_device.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7026
This prepares to remove the unnecessary offer message embedding in
hv_vmbus_channel.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7020
This prepares to remove the unnecessary offer message embedding in
hv_vmbus_channel.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7019
This prepares to remove the unnecessary offer message embedding in
hv_vmbus_channel.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7015
This prepares to remove the unnecessary offer message embedding in
hv_vmbus_channel.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D7014
For multi-channel devices, once the primary channel is closed,
a set of 'rescind' messages for sub-channels will be delivered
by Hypervisor. Sub-channel MUST be freed according to these
'rescind' messages; directly re-openning sub-channels in the
same fashion as the primary channel's re-opening does NOT work
at all.
After the primary channel is re-opened, requested # of sub-
channels will be delivered though 'channel offer' messages, and
this set of newly offered channels can be opened along side with
the primary channel.
This unbreaks the MTU setting for hn(4), which requires re-
openning all existsing channels upon MTU change.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6978
Instead of global variable, vmbus version is accessed through
a vmbus DEVMETHOD now.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6953
Pin the channel to cpu0 by default. Drivers having special channel-cpu
mapping requirement should call vmbus_channel_cpu_{set,rr}() themselves.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6918
This also fixes memory leakge if sub-connect messages are needed.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6878
So that we don't need to access the global vmbus softc.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6863
The device probe/attach has been move to a different thread, so the
reasons to create the channel asynchronously are no longer valid.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6862
While I'm here, remove the useless message type from message process
array, which is not used and serves no purposes at all.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6858
And use this new APIs for Initial Contact post message Hypercall.
More post message Hypercalls will be converted.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6830
And fix message processing; only channel messages are supported.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6706
- Avoid unnecessary indirection.
- Avoid bit fields.
- Use __packed.
Reviewed by: Jun Su <junsu microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6636
While I'm here, prefix function names w/ vmbus, since unlike Hyper-V
timecounter, Hyper-V event timer will not work w/o vmbus.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6598
While I'm here remove the event timer's dependency on hv_vmbus_priv.h
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6574
- Make sure that STIMER0 is disabled before writting to it, since
writing to an enabled STIMER will result in undefined behaviour.
- It is unnecessary to reconfigure STIMER0 upon each et_start().
- Make sure that MSR_HV_REF_TIME_COUNT will not return 0, since
writing 0 to STIMER_COUNT will disable the target STIMER.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6573
And release IDT vector before releasing ISR resources on interrupt
teardown path. We still have some work to do on the interrupt tearing
down path.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6519
Though it is highly unlikely this function would fail w/ BUS_DMA_WAITOK,
we had better to check its return value; better safe then sorry here.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6518
And
- Move message and event flags to vmbus_softc per-cpu data.
- Get rid of hv_setup_arg, which serves no purpose now.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6502
It does not belong to the vmbus.
While I'm here rework the Hypercall setup, e.g. use busdma(9)
and avoid bit fields.
Discussed with: Jun Su <junsu microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6445
Greatly reduce the locked instructions and reduce number of inner loops.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6404
Use vmbus softc to save vmbus per-cpu data. More stuffs will be moved
into vmbus softc.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6403
And move base channel id calculation out of inner loop. This prepares
for more event processing optimization.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6384
For channel0, it will never be processed on event handling path,
so there is no need to install it. After skipping in the channel0
installation, we could discard the channel0 check on event
handling hot code path.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6333
Currently, Application Processors (non-boot CPUs) are started by
MD code at SI_SUB_CPU, but they are kept waiting in a "pen" until
SI_SUB_SMP at which point they are released to run kernel threads.
SI_SUB_SMP is one of the last SYSINIT levels, so APs don't enter
the scheduler and start running threads until fairly late in the
boot.
This change moves SI_SUB_SMP up to just before software interrupt
threads are created allowing the APs to start executing kernel
threads much sooner (before any devices are probed). This allows
several initialization routines that need to perform initialization
on all CPUs to now perform that initialization in one step rather
than having to defer the AP initialization to a second SYSINIT run
at SI_SUB_SMP. It also permits all CPUs to be available for
handling interrupts before any devices are probed.
This last feature fixes a problem on with interrupt vector exhaustion.
Specifically, in the old model all device interrupts were routed
onto the boot CPU during boot. Later after the APs were released at
SI_SUB_SMP, interrupts were redistributed across all CPUs.
However, several drivers for multiqueue hardware allocate N interrupts
per CPU in the system. In a system with many CPUs, just a few drivers
doing this could exhaust the available pool of interrupt vectors on
the boot CPU as each driver was allocating N * mp_ncpu vectors on the
boot CPU. Now, drivers will allocate interrupts on their desired CPUs
during boot meaning that only N interrupts are allocated from the boot
CPU instead of N * mp_ncpu.
Some other bits of code can also be simplified as smp_started is
now true much earlier and will now always be true for these bits of
code. This removes the need to treat the single-CPU boot environment
as a special case.
As a transition aid, the new behavior is available under a new kernel
option (EARLY_AP_STARTUP). This will allow the option to be turned off
if need be during initial testing. I plan to enable this on x86 by
default in a followup commit in the next few days and to have all
platforms moved over before 11.0. Once the transition is complete,
the option will be removed along with the !EARLY_AP_STARTUP code.
These changes have only been tested on x86. Other platform maintainers
are encouraged to port their architectures over as well. The main
things to check for are any uses of smp_started in MD code that can be
simplified and SI_SUB_SMP SYSINITs in MD code that can be removed in
the EARLY_AP_STARTUP case (e.g. the interrupt shuffling).
PR: kern/199321
Reviewed by: markj, gnn, kib
Sponsored by: Netflix
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: sephe, Dexuan Cui <decui microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5957
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: jhb, kib, sephe
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5910
This time we make sure that the TIME_REF_COUNT MSR exists.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: sephe, Dexuan Cui <decui microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Features bits will be used to detect devices, e.g. timers, which
do not have corresponding event channels.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: sephe, Dexuan Cui <decui microsoft com>
Rearranged by: sephe
MFC after: 1 week
Sponsored by: Microsoft OSTC
Use vm_guest == VM_GUEST_HV is not enough to determine whether FreeBSD
is running on Hyper-V or not. What a mess.
Reported by: smokehydration tutanota com
Sponsored by: Microsoft OSTC
Suggested by: jhb
Reviewed by: Dexuan Cui <decui microsoft com>, Jun Su <junsu microsoft com>
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5850
First of all sema_post() can't be called w/ spinlock, and the channel
message queue processing is not on hot code path, i.e. spinlock is not
necessary.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: sephe, Dexuan Cui <decui microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5812
Since atomic_thread_fence_seq_cst() will become compiler fence on UP kernel.
Reviewed by: kib, Dexuan Cui <decui microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5852
The i8254 simulation in Hyper-V is kinda broken and is not available
in Generation 2 Hyper-V VMs, so Hyper-V timer must be registered early
enough so that it can be used to do the TSC freq calibration.
This fixes the notorious warning like this:
calcru: runtime went backwards from 50 usec to 25 usec for pid 0 (kernel)
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: kib, sephe
Tested by: kib, sephe
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5778
Using one taskqueue does not work, since the EOM MSR must be written
on the msg's owner CPU.
Noticed by: Jun Su <junsu microsoft com>
Discussed with: Jun Su <junsu microsoft com>, Dexuan Cui <decui microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Most often, hv_vmbus_post_message() doesn't fail. However, it fails
intermittently when GPADLs of large shared memory is to be established
with the host, e.g. on the hn(4) attach path: a GPADL of 15MB sendbuf
is created, for which lots of messages will be flooded to the host.
The host side tries to throttle the message rate by returning
HV_STATUS_INSUFFICIENT_BUFFERS.
Before this commit, we do several retries for failed messages, but the
delay between each retry is pretty/too low, which will cause sporadic
message posting failure. We now use large delay (>=1ms) between each
retry to fix the message posting failure.
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: sephe
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5715
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: Dexuan Cui <decui microsoft com>, sephe
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5215
This gets rid of the per-cpu SWIs.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: Dexuan Cui <decui microsoft com>, sephe
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5215
Using the same message slot as the other types of the messages has
the side effect that the event timer message could be deferred to
the swi threads to run (lacking of trapframe and the original code
didn't even handle that, so the event timer was actually broken).
As of this commit we use an independent message slot for event timer,
so that we could handle all of event timer messages in the interrupt
handler directly. Note, the message slot for event timer is still
bind to the same interrupt vector as the other types of messages.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: sephe
Discussed with: Jun Su <junsu microsoft com>, Dexuan Cui <decui microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5696
Submitted by: Ju Sun <junsu microsoft com>
Reviewed by: Dexuan Cui <decui microsoft com>, sephe
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5651
Each channel contains one RX ring and one TX ring. And we
try to distribute the channels to different evenly.
Note: Currently we don't have enough information to extract
the RSS type and RSS hash value from the received packets.
This greatly improves the TX/RX performance for 8 virtual CPU
Hyper-V over 10Ge: it can max out 10Ge for TCP when multiple
RX/TX rings are enabled.
This almost doubles the TX/RX performance for locally connected
Hyper-Vs: was 6Gbps w/ 128 TCP streams, now 11Gbps w/ multiple
RX/TX rings enabled.
It is not enabled by default; it will be switched on after more
tests.
Collaborated with: Hongjiang Zhang <honzhan microsoft com>
MFC after: 2 week
Sponsored by: Microsoft OSTC
And use it for cpu0 assignment; it does not sound right to assume that
cpu0 maps to vcpu0. And this factored out function will be exposed to
drivers, if driver specific CPU binding is needed, e.g. hn(4).
Move default cpu select after saving channel offer message. This makes
sure that all useful information of the channel has been setup.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5504
The renamed function create a sysctl tree for channel, and many
non-statistics nodes exists, so don't claim it only adds sysctl
nodes for statistics.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5503
taskqueue_enqueue() was changed to support both fast and non-fast
taskqueues 10 years ago in r154167. It has been a compat shim ever
since. It's time for the compat shim to go.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: sephe
Differential Revision: https://reviews.freebsd.org/D5131
It would serve as a debug tool, if the shared buffer ring's indices
stopped updating.
Submitted by: HongJiang Zhang <honzhan microsoft com>
Reviewed by: sephe, Jun Su <junsu microsoft com>
Modified by: sephe
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5402
sfence only makes sure about the store-store order, which is not
sufficient here. Use atomic_thread_fence_seq_cst() as suggested
jhb and kib (a locked op in the nutshell, which should have the
Reviewed by: jhb, kib, Jun Su <junsu microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5436
And unregister hv_device only for primary channels, who own the hv_device.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5451
We will eventually convert them to use busdma.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: adrian, sephe, Dexuan Cui <decui microsoft com>
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5087
And convert rndis non-hot path spinlock to mutex.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: adrian, sephe
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5081
HyperV code was ported from Linux. There is an implementation of
work queue called hv_work_queue. In FreeBSD, taskqueue could be
used for the same purpose. Convert all the consumer of hv_work_queue
to use taskqueue, and remove work queue implementation.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: adrian, Hongjiang Zhang <honzhan microsoft com>
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4963
- Use taskqueue instead of swi for event handling.
- Scan the interrupt flags in filter
- Disable ringbuffer interrupt mask in filter to ensure no unnecessary
interrupts.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: adrian, sephe, Dexuan <decui microsoft com>
Approved by: adrian (mentor)
MFC after: 2 weeks
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4920
The page information array could contain up to 32 elements (i.e. 512B).
And on network side w/ TSO, 11+ (176B+) elements, i.e. ~44K TSO packet,
in the page information array is quite common.
This saves us some cpu cycles.
Reviewed by: adrian, delphij
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4992
Vmbus event handler will need to find the channel by its relative
id, when software interrupt for event happens. The original lookup
searches the channel list, which is not very efficient. We now
create a table indexed by the channel relative id to speed up
the channel lookup.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
Reviewed by: delphij, adrain, sephe, Dexuan Cui <decui microsoft com>
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4802
Submitted by: Howard Su <howard0su gmail com>
Reviewed by: royger, Dexuan Cui <decui microsoft com>, adrian
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4693
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: delphij, royger, adrian
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4676
This is first step to move the generic part of HV code into kernel instead
of module, so that it is possible to use hypercall to implement some other
paravirtualization code in the kernel.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: royger, delphij, adrian
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D3072
We'll remove the per-channel control_work_queue because it can't properly
do serialization of message handling, e.g., when there are 2 NIC devices,
vmbus_channel_on_offer() -> hv_queue_work_item() has a race condition:
for an SMP VM, vmbus_channel_process_offer() can run concurrently on
different CPUs and if the second NIC's
vmbus_channel_process_offer() -> hv_vmbus_child_device_register() runs
first, the second NIC's name will be hn0 and the first NIC's name will
be hn1!
We can fix the race condition by removing the per-channel control_work_queue
and run all the message handlers in the global
hv_vmbus_g_connection.work_queue -- we'll do this in the next patch.
With the coming next patch, we have to run the non-blocking handlers
directly in the kernel thread vmbus_msg_swintr(), because the special
handling of sub-channel: when a sub-channel (e.g., of the storvsc driver)
is received and being handled in vmbus_channel_on_offer() running on the
global hv_vmbus_g_connection.work_queue, vmbus_channel_process_offer()
invokes channel->sc_creation_callback, i.e., storvsc_handle_sc_creation,
and the callback will invoke hv_vmbus_channel_open() -> hv_vmbus_post_message
and expect a further reply from the host, but the handling of the further
messag can't be done because the current message's handling hasn't finished
yet; as result, hv_vmbus_channel_open() -> sema_timedwait() will time out
and th device can't work.
Also renamed the handler type from hv_pfn_channel_msg_handler to
vmbus_msg_handler: the 'pfn' and 'channel' in the old name make no sense.
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: royger
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4596
Now vmbus_channel_on_offer() -> vmbus_channel_process_offer() can
safely run on the global hv_vmbus_g_connection.work_queue now.
We remove the per-channel control_work_queue to achieve the proper
serialization of the message handling.
I removed the bogus TODO in vmbus_channel_on_offer(): a vmbus offer
can only come from the parent partition, i.e., the host.
PR: kern/205156
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: Howard Su <howard0su gmail com>, delphij
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4597
- Vmbus multi channel support.
- Vector interrupt support.
- Signal optimization.
- Storvsc driver performance improvement.
- Scatter and gather support for storvsc driver.
- Minor bug fix for KVP driver.
Thanks royger, jhb and delphij from FreeBSD community for the reviews
and comments. Also thanks Hovy Xu from NetApp for the contributions to
the storvsc driver.
PR: 195238
Submitted by: whu
Reviewed by: royger, jhb, delphij
Approved by: royger
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Microsoft OSTC
resist easy conversion since they implement a great deal of their attach
logic inside probe(). Some of this could be fixed by moving it to attach(),
but some requires something more subtle than BUS_PROBE_NOWILDCARD.
Submitted by: Roger Pau Monné
Sponsored by: Citrix Systems R&D
Reviewed by: gibbs, grehan
Approved by: re (gjb)
sys/sys/systm.h:
* Add a new VM_GUEST type, VM_GUEST_HV (HyperV guest).
sys/dev/hyperv/vmbus/hv_vmbus_drv_freebsd.c:
sys/dev/hyperv/vmbus/hv_hv.c:
sys/dev/hyperv/stordisengage/hv_ata_pci_disengage.c:
* Set vm_guest to VM_GUEST_HV and use that on other HyperV related
devices instead of cloning the cpuid hypervisor check.
* Cleanup the vmbus_identify function.
union members in strict C99, by giving them names. While here, add some
FreeBSD keywords where they were missing.
Approved by: re (gjb)
Reviewed by: grehan