It serves no useful purpose and wasn't as popular as its equally meritless
cousin, srandomdev(3).
Setting aside the problems with rand(3) in general, the problem with this
interface is that the seed isn't shared with the caller (other than by
attacking the output of the generator, which is trivial, but not a hallmark of
pleasant API design). The (arguable) utility of rand(3) or random(3) is as a
semi-fast simulation generator which produces consistent results from a given
seed. These are mutually at odd. Furthermore, sometimes people got the
mistaken impression that a high quality random seed meant a weak generator like
rand(3) or random(3) could be used for things like cryptographic key
generation. This is absolutely not so.
The API was never part of a standard and was not widely used in tree. Existing
in-tree uses have all been removed.
Possible replacement in out of tree codebases:
char buf[3];
time_t t;
time(t);
strftime(buf, sizeof(buf), "%S", gmtime(&t));
srand(atoi(buf));
Relnotes: yes
A comment at the top of the file claimed that the file was grouped into
OLD_FILES, OLD_LIBS, then OLD_DIRS, but that hasn't been the case since
the mid-2000s. Delete the stale comment, add a new comment for the
historical split entries, and move the one more recent entry (from 2013)
to group it into a single logical change.
Add the manual page for sio(4) to ObsoleteFiles.inc, so that make delete-all
will remove it. The manual page was removed together with sio(4) in
r354929.
Approved by: emaste
Differential Revision: https://reviews.freebsd.org/D22477
* Remove zpool_create_013_neg. FreeBSD doesn't have an equivalent of
Solaris's metadevices. GEOM would be the equivalent, but since all geoms
are the same from ZFS's perspective, this test would be redundant with
zpool_create_012_neg
* Remove zpool_create_014_neg. FreeBSD does not support swapping to regular
files.
* Remove zpool_create_016_pos. This test is redundant with literally every
other test that creates a disk-backed pool.
* s:/etc/vfstab:/etc/fstab in zpool_create_011_neg
* Delete the VTOC-related portion of zpool_create_008_pos. FreeBSD doesn't
use VTOC.
* Replace dumpadm with dumpon and swap with swapon in multiple tests.
* In zpool_create_015_neg, don't require "zpool create -n" to fail. It's
reasonable for that variant to succeed, because it doesn't actually open
the zvol.
* Greatly simplify zpool_create_012_neg. Make it safer, too, but not
interfering with the system's regular swap devices.
* Expect zpool_create_011_neg to fail (PR 241070)
* Delete some redundant cleanup steps in various tests
* Remove some unneeeded ATF timeout specifications. The default is fine.
PR: 241070
MFC after: 2 weeks
Sponsored by: Axcient
In FreeBSD 11 along with the rework on the collation, mklocale(1) and colldef(1)
has been replaced by localedef(1) (a note has been added to the manpage to state
it).
mklocale(1) and colldef(1) has been kept around to be able to build older
versions of FreeBSD. None of the version requiring those tools are supported
anymore so it is time to remove them from base
When the pwm.9 manual was removed, a symlink between pwmbus.9 and pwm.9 was
created, but there's an entry in ObsoleteFiles.inc to remove pwn.9, meaning
that on every installation pwm.9 is created, and make delete-old deletes it.
Remove the entry from ObsoleteFiles.inc, the symlink is clearly intentional
and shouldn't be removed.
Reviewed by: imp, ian
Approved by: imp (implicit, review OK)
Differential Revision: https://reviews.freebsd.org/D21198
The pft_ping.py and sniffer.py tool is moved from tests/sys/netpfil/pf to
tests/sys/netpfil/common directory because these tools are to be used in
common for all the firewalls.
Submitted by: Ahsan Barkati
Reviewed by: kp, thj
Sponsored by: Google, Inc. (GSoC 2019)
Differential Revision: https://reviews.freebsd.org/D21276
Now that we have a way to obtain entropy in capability mode
(getrandom(2)), libcap_random is obsolete. Remove it.
Bump __FreeBSD_version in case anything happens to use it, though I've
found no consumers.
Reviewed by: delphij, emaste, oshogbo
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21033
In all supported (and most unsupported) FreeBSD versions the appropriate
header for Capsicum is sys/capsicum.h. Software including sys/capability.h
is most likely looking for Linux capabilities based on the withdrawn
POSIX.1e draft.
This header was previously removed in r334929 and r340156, but reverted
each time due to ports failures. These issues have now (broadly) been
addressed.
PR: 228878 [exp-run]
Submitted by: eadler (r334929)
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
ioctl definitions and related datatypes that allow userland control of pwm
hardware via the pwmc device. The new name and location better reflects its
assocation with a single device driver.
libunwind and openmp to the upstream release_80 branch r363030
(effectively, 8.0.1 rc2). The 8.0.1 release should follow this within a
week or so.
MFC after: 2 weeks
Fix OpsoleteFiles.inc after removal of ethernet drivers. The drivers have
manual pages, and manual pages are generally stored compressed, with a .gz
suffix, but this is not reflected in ObsoleteFiles and make delete-old fails
to remove them.
Approved by: brooks
Sponsored by: B3 Init
Differential Revision: https://reviews.freebsd.org/D20351
These complement cap_sysctlbyname(3) to provide a drop-in
replacement for the corresponding libc functions.
Also revise the libcap_sysctl limit interface to provide access
to sysctls by MIB, and to avoid direct manipulation of nvlists
by the caller.
Reviewed by: oshogbo
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17854
* Convert from plain to TAP for slightly improved introspection when skipping
the tests due to requirements not being met.
* Test for the net/py-dpkt (origin) package being required when running the
tests, instead of relying on a copy of the dpkt.py module from 2014. This
enables the tests to work with py3. Subsequently, remove
`tests/sys/opencrypto/dpkt.py(c)?` via `make delete-old`.
* Parameterize out `python2` as `$PYTHON`.
PR: 237403
MFC after: 1 week
Linux generates the content of procfs files using a mechanism prefixed with
seq_*. This in particular came up with recent gcov import.
Sponsored by: The FreeBSD Foundation
Instead of PRIVATELIB + NO_PIC. This avoids the need for the wlandebug
PIE special case added in r344211, and provides a stronger guarantee
against 3rd party software coming to depend on the API or ABI.
If / when we declare the API/ABI to be stable we can make it a normal
library.
Discussed with: bapt
Sponsored by: The FreeBSD Foundation
The KPI have been reviewed and cleansed of features that were planned
back 20 years ago and never implemented. The pfil(9) internals have
been made opaque to protocols with only returned types and function
declarations exposed. The KPI is made more strict, but at the same time
more extensible, as kernel uses same command structures that userland
ioctl uses.
In nutshell [KA]PI is about declaring filtering points, declaring
filters and linking and unlinking them together.
New [KA]PI makes it possible to reconfigure pfil(9) configuration:
change order of hooks, rehook filter from one filtering point to a
different one, disconnect a hook on output leaving it on input only,
prepend/append a filter to existing list of filters.
Now it possible for a single packet filter to provide multiple rulesets
that may be linked to different points. Think of per-interface ACLs in
Cisco or Juniper. None of existing packet filters yet support that,
however limited usage is already possible, e.g. default ruleset can
be moved to single interface, as soon as interface would pride their
filtering points.
Another future feature is possiblity to create pfil heads, that provide
not an mbuf pointer but just a memory pointer with length. That would
allow filtering at very early stages of a packet lifecycle, e.g. when
packet has just been received by a NIC and no mbuf was yet allocated.
Differential Revision: https://reviews.freebsd.org/D18951
iBCS2 was disconnected from the build in 2015 (see r291419)
bsdconfig parts submitted by dteske.
Reviewed by: kib (previous version)
Sponsored by: The FreeBSD Foundation
More time is still needed for ports to accommodate the migration to
capsicum.h.
The header was renamed in 2014 due to concerns about conflicts with with
a draft POSIX.1e capability.h header on other systems and there is (now)
no need for complex autoconf tests for both capability.h and capsicum.h.
Any supported Capsicum-capable system has capsicum.h.
Reported by: antoine
Sponsored by: The FreeBSD Foundation
In r263232 sys/capability.h was renamed to sys/capsicum.h, to avoid
conflicts with a capability.h header found on other operating systems.
Sufficient time has now passed, so remove the old header at the
beginning of FreeBSD 13.
Discussed with: oshogbo
Sponsored by: The FreeBSD Foundation
Remove malloc_domain(9) and most other _domain KPIs added in r327900.
The new functions allow the caller to specify a general NUMA domain
selection policy, rather than specifically requesting an allocation from
a specific domain. The latter policy tends to interact poorly with
M_WAITOK, resulting in situations where a caller is blocked indefinitely
because the specified domain is depleted. Most existing consumers of
the _domain KPIs are converted to instead use a DOMAINSET_PREF() policy,
in which we fall back to other domains to satisfy the allocation
request.
This change also defines a set of DOMAINSET_FIXED() policies, which
only permit allocations from the specified domain.
Discussed with: gallatin, jeff
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17418
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much. However, even though this device
has been obsolete for 15 years at least, sys/joystick.h is included in
a number of graphics packages still, so that remains. A full exprun
is needed before that can be removed.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
I held the mistaken belief this was completely unused. While the
driver is unused and likely not relevant for a long time,
sys/joystick.h lives on in maybe half a dozen ports, even though
hardware to use it hasn't been widely used in maybe 15 years.
Remove mse and all support for bus and inport devices from the tree.
Data from nycbug's dmesg database shows the last sighting of this
driver was in 4.10 on only one machine.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17628
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
- Update OpenSSL to version 1.1.1.
- Update Kerberos/Heimdal API for OpenSSL 1.1.1 compatibility.
- Bump __FreeBSD_version.
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
This will need a real date once this is merged to head.
One weird thing to note: the 32-bit engines get dumped into /usr/lib32
rather than /usr/lib32/engines, and I bet the 32-bit libcrypto.so i
looking for the .so files in the wrong place. We should probably fix
both of those at some point.
Reviewed by: emaste, jkim
Differential Revision: https://reviews.freebsd.org/D17384
vermaden (maintainer of beadm) points out the following inconsistencies:
- "missing command" is not printed prior to usage if the error is simply a
missing command; this should be obvious from the context
- "bectl rename" isn't using the "don't unmount" flag (zfs rename -u), so
the active BE can't be renamed. It doesn't make sense in our context to
*not* use -u, so use it.
Documentation updates reflect the above and note an inconsistency with the
'destroy' command that is consistent with other parts of the base system.
A fix for libbe(3) not properly being installed to /lib is included.
SHLIBDIR should have been added when it was moved in r337995.
Approved by: re (kib)
ObsoleteFiles.inc:
Remove manual pages for arc4random_addrandom(3) and
arc4random_stir(3).
contrib/ntp/lib/isc/random.c:
contrib/ntp/sntp/libevent/evutil_rand.c:
Eliminate in-tree usage of arc4random_addrandom().
crypto/heimdal/lib/roken/rand.c:
crypto/openssh/config.h:
Eliminate in-tree usage of arc4random_stir().
include/stdlib.h:
Remove arc4random_stir() and arc4random_addrandom() prototypes,
provide temporary shims for transistion period.
lib/libc/gen/Makefile.inc:
Hook arc4random-compat.c to build, add hint for Chacha20 source for
kernel, and remove arc4random_addrandom(3) and arc4random_stir(3)
links.
lib/libc/gen/arc4random.c:
Adopt OpenBSD arc4random.c,v 1.54 with bare minimum changes, use the
sys/crypto/chacha20 implementation of keystream.
lib/libc/gen/Symbol.map:
Remove arc4random_stir and arc4random_addrandom interfaces.
lib/libc/gen/arc4random.h:
Adopt OpenBSD arc4random.h,v 1.4 but provide _ARC4_LOCK of our own.
lib/libc/gen/arc4random.3:
Adopt OpenBSD arc4random.3,v 1.35 but keep FreeBSD r114444 and
r118247.
lib/libc/gen/arc4random-compat.c:
Compatibility shims for arc4random_stir and arc4random_addrandom
functions to preserve ABI. Log once when called but do nothing
otherwise.
lib/libc/gen/getentropy.c:
lib/libc/include/libc_private.h:
Fold __arc4_sysctl into getentropy.c (renamed to arnd_sysctl).
Remove from libc_private.h as a result.
sys/crypto/chacha20/chacha.c:
sys/crypto/chacha20/chacha.h:
Make it possible to use the kernel implementation in libc.
PR: 182610
Reviewed by: cem, markm
Obtained from: OpenBSD
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16760
* libcasper.so.0, which started in /usr/lib, then moved to /lib, but
was later replaced by libcasper.so.1
* 32-bit versions of static casper libraries
* 32-bit versions of static stand libraries
* 32-bit versions of static ifc(onfig) libraries
The is required because libpcap.so depends on the libraries when OFED
is enabled.
Reviewed by: bdrewery, hselasky
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D16230
Remove numactl(1), edit numa(4) to bring it some closer to reality,
provide libc ABI shims for old NUMA syscalls.
Noted and reviewed by: brooks (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D16142
kgdb now handles kernel module state internally, so the asf tool serves
no purpose.
PR: 229046
Reviewed by: brooks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15827
This file has only generated a warning for the last 18 months. Its
existence at this point only serves to confuse software looking for
POSIX.1e capabilities and produce actionless warnings.
GNU grep as in actually in base does not have any translations support
compiled in, so no functionnality loss.
We do support 193 locales in base, we will never catch up on that number of
translation with bsd grep.
Removing NLS support make bsd grep consistent with the other binaries in base
which are not translated, and also reduce a little bit the code.
Reviewed by: kevans
Approved by: kevans
Discussed with: kevans @BSDCan
Differential Revision: https://reviews.freebsd.org/D15682
This driver was merged to HEAD one week prior to Exar publicly announcing they
had left the Ethernet market. It is not known to be used and has various code
quality issues spotted by Brooks and Hiren. Retire it in preparation for
FreeBSD 12.0.
Submitted by: kbowling
Reviewed by: brooks imp
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15442
Remove sys/modules/ixgb and add the linked man page for if_ixgb via
ObsoleteFiles.
Submitted by: kbowling
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15273
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license. Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).
Reviewed by: rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15245
Half of implementations always failed (returned (-1)) and they were
previously used in only one place.
Reviewed by: kib, andrew
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15102
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
When we had both groff and mandoc in base, we decided to keep the roff(7)
manpage from groff. when remoing groff, we forgot to install the mandoc version
instead.
This fixes it.
Reported by: trasz
MFC after: 1 week
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).
Reviewed by: kib, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15017
efi.4th was added to ObsoleteFiles and disconnected from the build, but not
removed from hte repo. We've since found a mild use for it that makes some
amount of sense, so partially revert r328780 and bring it back to life.
Reported by: many
X-MFC-With: r331326
