The list of possible features in hccontrol/features2str() is incomplete.
Refer to "Bluetooth Core Specification 5.2 Vol. 2 Part C. 3.3 Feature Mask Definition".
Submitted by: Marc Veldman <marc@bumblingdork.com>
PR: 245354
MFC after: 1 week
Sponsored by: Mellanox Technologies
description for "jail -e" mode to show that it does not take
additional jail name argument.
Reported by: David Marec <david.marec@davenulle.org>
MFC after: 3 days
Print the failed instruction stream as a contiguous stream of hex. This
is closer to something you could throw at a disassembler than 0xHH 0xHH
0xHH.
Also, use the debug.h 'raw' stdio-aware printf helper to avoid the
cascading
line
effect.
Add an implementatation of the 'Virtual Machine Generation ID' spec to
Bhyve. The spec provides a randomly generated GUID (at bhyve start) in
device memory, along with an ACPI device with _CID VM_Gen_Counter and ADDR
evaluating to a Package pointing at that GUID.
A GPE is defined which Notifies the ACPI Device when the generation changes
(such as when a snapshot is rolled back). At this time, Bhyve does not
support snapshotting, so the GPE is never actually raised.
Suggested by: rpokala
Discussed with: grehan
Differential Revision: https://reviews.freebsd.org/D23165
To allow more general use of the bootrom region, separate initialization from
allocation, and allocation from loading a file.
The bootrom segment is the high 16MB of the low 4GB region.
Each allocation in the segment creates a new mapping with specified protection.
By default, allocation begins at the low end of the range. However, the
BOOTROM_ALLOC_TOP flag is provided to locate a provided bootrom in the high
region it is expected to be in.
The existing ROM-file loading code is refactored to use the new interface.
Reviewed by: grehan (earlier version)
Differential Revision: https://reviews.freebsd.org/D24422
GPIO drivers who supports interrupts report them in the caps
(obtain via the getcaps method) but gpioctl doesn't know
how to interpret this and print "UNKNOWN" for each one of them.
Even if we don't have userland gpio interrupts support for now
let gpioctl print the supported caps.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24133
This uses DES and the kernel no longer supports DES for in-kernel GSS.
Reviewed by: kp
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24345
The flag can be enabled using the new 'mtu' option:
bhyve -s X:Y:Z,virtio-net,[tapN|valeX:N],mtu=9000
Reported by: vmaffione, jhb
Approved by: vmaffione (mentor)
Differential Revision: https://reviews.freebsd.org/D23971
Recently added/changed lines in various kernel configs have caused some
buffer overflows that went undetected. These were detected with a config
built using -fno-common as these line buffers smashed one of our arrays,
then further triaged with ASAN.
Double the sizes; this is really not a great fix, but addresses the
immediate need until someone rewrites config. While here, add some bounds
checking so that we don't need to detect this by random bus errors or other
weird failures.
MFC after: 3 days
instead of sprinkling them out over many disjoint files. This is a follow-up
to achieve the same goal in an incomplete rev.348521.
Approved by: imp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20520
This is mostly two problems spread out far and wide:
- ypldap_process should be declared properly
- debug is defined differently in many programs
For the latter, just extern it and define it everywhere that actually needs
it. This mostly works out nicely for ^/libexec/ypxfr, which can remove the
assignment at the beginning of main in favor of defining it properly.
-fno-common will become the default in GCC10/LLVM11.
MFC after: 3 days
Notably, the default IFS contains space/tab, thus any leading/trailing
whitespace characters tend to be removed.
Set IFS= for just the read lines to mitigate this, allowing the user to be
less surprised when their leading/trailing spaces weren't actually captured
in the password as they are with other means of setting a user's password.
PR: 245342
Submitted by: dereks_lifeofadishwasher.com
Reviewed by: jilles
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24292
jail(8) would try to use strcpy to remove the interface from the start of
an IP address. This is undefined, and on arm64 will result in unexpected
IPv6 addresses.
Fix this by using memmove top move the string.
PR: 245102
Reported by: sbruno
MFC after: 2 weeks
Sponsored by: Innovate UK
According to the SMBIOS specification (revision 2.7 or newer), the
extended module size field should only be used for sizes that can't
fit in the older size field.
Reviewed by: rgrimes, grehan, jhb
Differential Revision: https://reviews.freebsd.org/D24107
As a followup to the use of login.conf environment vars (other than PATH) in
cron, this patch adds PATH (and HOME) to the list of login.conf settings
respected.
The new logic is as follows:
1. SHELL is always _PATH_BSHELL unless explicitly overridden in the crontab
file itself; no other settings are respected. This is unchanged.
2. PATH is taken from the first of: crontab file, login.conf, _PATH_DEFPATH
3. HOME is taken from the first of: crontab file, login.conf, passwd entry,
unset
4. The current directory for invoking the command is taken from the crontab
file's value of HOME (existing behavior), or the passwd entry, but not
anywhere else (so it might not equal HOME if that was set in login.conf).
Submitted by: Andrew Gierth <andrew_tao173.riddles.org.uk>
Reviewed by: sigsys_gmail.com
Differential Revision: https://reviews.freebsd.org/D23597
Move this handful of definitions into main.c, properly declare these as
extern in config.h. This fixes the config(8) build with -fno-common.
Unexplained in my previous commit to gas, -fno-common will become the
default in GCC10 and LLVM11, so it's worth addressing these in advance.
MFC after: 3 days
The SQHD field of a Completion Queue entry indicates the current
Submission Queue head pointer value. The head pointer represents the
next entry to be consumed and is updated after consuming the current
entry.
In the Admin queue processing, the current code updates the head pointer
after reporting the value to the host via the SQHD. This gives the
impression that the Controller is perpetually one command behind in its
processing of the Admin SQ. And while this doesn't appear to bother some
initiators, it is wrong.
Fix is to update the SQ head pointer prior to writing the SQHD value in
the completion.
While here, fix missed update of dword 0 (cdw0) in the completion
message.
Reported by: khng300
Reviewed by: jhb, imp
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24083
The bhyve NVMe emulation has a race in the logic which generates command
completion interrupts. On FreeBSD guests, this manifests as kernel log
messages similar to:
nvme0: Missing interrupt
The NVMe emulation code sets a per-submission queue "busy" flag while
processing the submission queue, and only generates an interrupt when
the submission queue is not busy.
Aside from being counter to the NVMe design (i.e. interrupt properties
are tied to the completion queue) and adding complexity (e.g. exceptions
to not generating an interrupt when "busy"), it causes a race condition
under the following conditions:
- guest OS has no outstanding interrupts
- guest OS submits a single NVMe IO command
- bhyve emulation processes the SQ and sets the "busy" flag
- bhyve emulation submits the asynchronous IO to the backing storage
- IO request to the backing storage completes before the SQ processing
loop exits and doesn't generate an interrupt because the SQ is "busy"
- bhyve emulation finishes processing the SQ and clears the "busy" flag
Fix is to remove the "busy" flag and generate an interrupt when the CQ
head and tail pointers do not match.
Reported by: khng300
Reviewed by: jhb, imp
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24082
This adds support for the Dataset Management (DSM) command to the NVMe
emulation in general, and more specifically, for the deallocate
attribute (a.k.a. trim in the ATA protocol). If the backing storage for
the namespace supports delete (i.e. deallocate), setting the deallocate
attribute in a DSM will trim/delete the requested LBA ranges in the
underlying storage.
Reviewed by: jhb, araujo, imp
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21839
Pass the struct pci_nvme_blockstore pointer for this namespace to the
namespace initialization function instead of only the desired eui64
value.
Minor functional change in that the code updates the eui64 value in the
blockstore.
Reviewed by: jhb, araujo
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21838
Add a "copy direction" parameter to nvme_prp_memcpy such that data can
be copied to the memory specified by the PRP entries (current behavior)
or copied from the PRP entries (new behavior). The upcoming deallocate
functionality will use the copy from capability.
Reviewed by: jhb, araujo
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21837
Property-based filters allow substring and regular expressions
(see re_format(7)) matching against various message attributes.
Filter specification starts with '#:' or ':' followed by three
comma-separated fields property, operator, "value". Value must be
double-quoted. A double quote and backslash must be escaped by a
blackslash.
Following properties are supported as test value:
o msg - body of the message received;
o programname - program name sent the message;
o hostname - hostname of message's originator;
o source - an alias for hostname.
Supported operators:
o contains - true if filter value is found as a substring of property;
o isequal - true if filter value is equal to property;
o startswith - true if property starts with filter value;
o regex - true if property matches basic regular expression defined
in filter value;
o ereregex - true if property matches extended regular expression
defined in filter value;
Operator may be prefixed by '!' to invert compare logic or by
'icase_' to make comparison function case insensitive.
Submitted by: Boris N. Lytochkin <lytboris at gmail com>
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23468
We need a valid st_dev, st_ino and st_mtime
to correctly track which files have been verified
and to update our notion of time.
ve_utc_set(): ignore utc if it would jump our current time
by more than VE_UTC_MAX_JUMP (20 years).
Allow testing of install command via userboot.
Need to fix its stat implementation too.
bhyveload also needs stat fixed - due to change to userboot.h
Call ve_error_get() from vectx_close() when hash is wrong.
Track the names of files we have hashed into pcr
For the purposes of measured boot, it is important
to be able to reproduce the hash reflected in
loader.ve.pcr
so loader.ve.hashed provides a list of names in the order they
were added.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D24027
While here do a bit of cleanup:
- declare local variables as such,
- make tmpdir_create() clean up logfile directories, to handle a
previously interrupt test run more gracefully.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This happens when compressing a previously uncompressed already-rotated
file, as happens when handling the 'p' flag in newsyslog.conf. The file
name is stored in a flexible array member, so these structures cannot be
stack allocated.
Also make sure that we call change_attrs() and do_zipwork() in dry-run
mode; they handle this properly, contrary to the commit log message for
r327451.
CID: 1008168
Github PR: https://github.com/freebsd/freebsd/pull/427
MFC after: 2 weeks
Submitted by: Radek Brich (original version)
When deleting a user, if its home directory does not belong to it, it should
not be removed. This is the promise that the manpage makes, the tool should
ensure that it respects that promise.
Add a regression test about it
PR: 244967
Submitted by: Eric Hanneken <eric@erichanneken.com>
MFC after: 3 days
