Both the in-kernel C variant and libc asm variant have very poor performance.
The former compiles to a single byte comparison loop, which breaks down even
for small sizes. The latter uses rep cmpsq/b which turn out to have very poor
throughput and are slower than a hand-coded 32-byte comparison loop.
Depending on size this is about 3-4 times faster than the current routines.
Reviewed by: kib
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17328
given in random(4).
This includes updating of the relevant man pages, and no-longer-used
harvesting parameters.
Ensure that the pseudo-unit-test still does something useful, now also
with the "other" algorithm instead of Yarrow.
PR: 230870
Reviewed by: cem
Approved by: so(delphij,gtetlow)
Approved by: re(marius)
Differential Revision: https://reviews.freebsd.org/D16898
Revert r338177, r338176, r338175, r338174, r338172
After long consultations with re@, core members and mmacy, revert
these changes. Followup changes will be made to mark them as
deprecated and prent a message about where to find the up-to-date
driver. Followup commits will be made to make this clear in the
installer. Followup commits to reduce POLA in ways we're still
exploring.
It's anticipated that after the freeze, this will be removed in
13-current (with the residual of the drm2 code copied to
sys/arm/dev/drm2 for the TEGRA port's use w/o the intel or
radeon drivers).
Due to the impending freeze, there was no formal core vote for
this. I've been talking to different core members all day, as well as
Matt Macey and Glen Barber. Nobody is completely happy, all are
grudgingly going along with this. Work is in progress to mitigate
the negative effects as much as possible.
Requested by: re@ (gjb, rgrimes)
muge(4) is the USB ethernet adapter that is used in RPi 3B+. Shipping it
in GENERIC kernel allows using NFS root out of the box instead of either
building custom kernel or modifying loader.conf for early loading of if_muge.ko
No objections: emaste
The wrapper is a thin shim around libsodium's Poly-1305 implementation. For
now, we just use the C algorithm and do not attempt to build the
SSE-optimized variant for x86 processors.
The algorithm support has not yet been plumbed through cryptodev, or added
to cryptosoft.
The jedec_ts(4) driver has been marked as deprecated in stable/11, and is
now being removed from -HEAD. Add a notice in UPDATING, and update the few
remaining references (regarding jedec_dimm(4)'s compatibility and history)
to reflect the fact that jedec_ts(4) is now deleted.
Reviewed by: avg
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16537
9102 zfs should be able to initialize storage devices
The first access to a disk block can incur a performance penalty on some
platforms (e.g. AWS's EBS, VMware VMDKs). Therefore it is recommended that
volumes be "thick provisioned", where supported by the platform (VMware).
Thick provisioning is time consuming and often is ignored. If the thick
provision step is omitted, customers will see suboptimal performance until
we have written to all parts of the LUN. ZFS should be able to initialize
any unused storage to remove any first-write penalty that exists.
illumos/illumos-gate@094e47e980
Reviewed by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
The nvmem interface helps provider of nvmem data to expose themselves to consumer.
NVMEM is generally present on some embedded board in a form of eeprom or fuses.
The nvmem api are helpers for consumer to read/write the cell data from a provider.
Differential Revision: https://reviews.freebsd.org/D16419
The last known robust version of this code base was FreeBSD 8.2. There
are no users of this on current, and all users of it have abandoned
this platform or are in legacy mode with a prior version of FreeBSD.
All known users on arm@ approved this removal, and there were no
objections.
Differential Revision: https://reviews.freebsd.org/D16312
Code analysis and runtime analysis using truss(8) indicate that the only
privileged operations performed by ntpd are adjusting system time, and
(re-)binding to privileged UDP port 123. These changes add a new mac(4)
policy module, mac_ntpd(4), which grants just those privileges to any
process running with uid 123.
This also adds a new user and group, ntpd:ntpd, (uid:gid 123:123), and makes
them the owner of the /var/db/ntp directory, so that it can be used as a
location where the non-privileged daemon can write files such as the
driftfile, and any optional logfile or stats files.
Because there are so many ways to configure ntpd, the question of how to
configure it to run without root privs can be a bit complex, so that will be
addressed in a separate commit. These changes are just what's required to
grant the limited subset of privs to ntpd, and the small change to ntpd to
prevent it from exiting with an error if running as non-root.
Differential Revision: https://reviews.freebsd.org/D16281
to it being a common name elsewhere. Rename the old kzip one
to subr_inflate.c.
This actually fixes the build issues on sparc64 that my inclusion of
.PATH ${SYSDIR}/kern created in r336244, so also revert the broken
workaround I committed in r336249.
This slipped passed me because apparently, I never did a clean build.
boot_parse_arg to parse a single arg
boot_parse_cmdline to parse a command line string
boot_parse_args to parse all the args in a vector
boot_howto_to_env Convert howto bits to env vars
boot_env_to_howto Return howto mask mased on what's set in the environment.
All these routines return an int that's the bitmask of the args
translated to RB_* flags. As a special case, the 'S' flag sets the
comconsole_speed env var. Any arg that looks like a=b will set the env
key 'a' to value 'b'. If =b is omitted, 'a' is set to '1'. This
should help us reduce the number of redundant copies of these routines
in the tree. It should also give a more uniform experience between
platforms.
Also, invent a new flag RB_PROBE that's set when 'P' is parsed. On
x86 + BIOS, this means 'probe for the keyboard, and if it's not there
set both RB_MULTIPLE and RB_SERIAL (which means show the output on
both video and serial consoles, but make serial primary). Others it
may be some similar concept of probing, but it's loader dependent
what, exactly, it means.
These routines are suitable for /boot/loader and/or the kernel,
though they may not be suitable for the tightly hand-rolled-for-space
environments like boot2.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16205
It looks like the intent was to allow ZSTD support to be
compiled into the kernel with options ZSTDIO. But it doesn't look
like that was ever implemented or I'm missing how to do it.
I did a cursory audit of kernel config files and made a decision to
enable ZSTDIO in riscv GENERIC and mips MALTA configurations. All other
kernel configurations already had this option in their kernel configs
but they didn't do anything useful as the feature was declared as
"standard" prior to this.
Reviewed by: cem allanjude
Differential Revision: https://reviews.freebsd.org/D16007
framework.
The code is organized into a few distinct pieces:
* The meta-data store (in veriexec_metadata.c) which maps a file system
identifier, file identifier, and generation key tuple to veriexec
meta-data record.
* Fingerprint management (in veriexec_fingerprint.c) which deals with
calculating the cryptographic hash for a file and verifying it. It also
manages the loadable fingerprint modules.
* MAC policy implementation (in mac_veriexec.c) which implements the
following MAC methods:
mpo_init
Initializes the veriexec state, meta-data store, fingerprint modules,
and registers mount and unmount EVENTHANDLERs
mpo_syscall
Implements the following per-policy system calls:
MAC_VERIEXEC_CHECK_FD_SYSCALL
Check a file descriptor to see if the referenced file has a valid
fingerprint.
MAC_VERIEXEC_CHECK_PATH_SYSCALL
Check a path to see if the referenced file has a valid fingerprint.
mpo_kld_check_load
Check if loading a kld is allowed. This checks if the referenced vnode
has a valid fingerprint.
mpo_mount_destroy_label
Clears the veriexec slot data in a mount point label.
mpo_mount_init_label
Initializes the veriexec slot data in a mount point label.
The file system identifier is saved in the veriexec slot data.
mpo_priv_check
Check if a process is allowed to write to /dev/kmem and /dev/mem
devices.
If a process is flagged as trusted, it is allowed to write.
mpo_proc_check_debug
Check if a process is allowed to be debugged. If a process is not
flagged with VERIEXEC_NOTRACE, then debugging is allowed.
mpo_vnode_check_exec
Check is an exectuable is allowed to run. If veriexec is not enforcing
or the executable has a valid fingerprint, then it is allowed to run.
NOTE: veriexec will complain about mismatched fingerprints if it is
active, regardless of the state of the enforcement.
mpo_vnode_check_open
Check is a file is allowed to be opened. If verification was not
requested, veriexec is not enforcing, or the file has a valid
fingerprint, then veriexec will allow the file to be opened.
mpo_vnode_copy_label
Copies the veriexec slot data from one label to another.
mpo_vnode_destroy_label
Clears the veriexec slot data in a vnode label.
mpo_vnode_init_label
Initializes the veriexec slot data in a vnode label.
The fingerprint status for the file is stored in the veriexec slot data.
* Some sysctls, under security.mac.veriexec, for setting debug level,
fetching the current state in a human-readable form, and dumping the
fingerprint database are implemented.
* The MAC policy implementation source file also contains some utility
functions.
* A set of fingerprint modules for the following cryptographic hash
algorithms:
RIPEMD-160, SHA1, SHA2-256, SHA2-384, SHA2-512
* Loadable module builds for MAC/veriexec and fingerprint modules.
WARNING: Using veriexec with NFS (or other network-based) file systems is
not recommended as one cannot guarantee the integrity of the files
served, nor the uniqueness of file system identifiers which are
used as key in the meta-data store.
Reviewed by: ian, jtl
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8554
The hardware rate limiting feature is enabled by the RATELIMIT kernel
option. Please refer to ifconfig(8) and the txrtlmt option and the
SO_MAX_PACING_RATE set socket option for more information. This
feature is compatible with hardware transmit send offload, TSO.
A set of sysctl(8) knobs under dev.mce.<N>.rate_limit are provided to
setup the ratelimit table and also to fine tune various rate limit
related parameters.
Sponsored by: Mellanox Technologies
We can't modify vendor code so there's no signal in warnings from it.
Similarly -Waddress-of-packed-member is not useful on networking code
as access to packed structures is fundamental to its operation.
storage, CDC ACM (serial), and CDC ECM (ethernet) at the same time.
It's quite similar in function to Linux' "g_multi" gadget.
Reviewed by: hselasky@
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
This driver was merged to HEAD one week prior to Exar publicly announcing they
had left the Ethernet market. It is not known to be used and has various code
quality issues spotted by Brooks and Hiren. Retire it in preparation for
FreeBSD 12.0.
Submitted by: kbowling
Reviewed by: brooks imp
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15442
Part 3 of many ...
The VPC framework relies heavily on cloning pseudo interfaces
(vmnics, vpc switch, vcpswitch port, hostif, vxlan if, etc).
This pulls in that piece. Some ancillary changes get pulled
in as a side effect.
Reviewed by: shurd@
Approved by: sbruno@
Sponsored by: Joyent, Inc.
Differential Revision: https://reviews.freebsd.org/D15347
Read locking is over used in the kernel to guarantee liveness. This API makes
it easy to provide livenes guarantees without atomics.
Includes epoch_test kernel module to stress test the API.
Documentation will follow initial use case.
Test case and improvements to preemption handling in response to discussion
with mjg@
Reviewed by: imp@, shurd@
Approved by: sbruno@
This is a component of a system which lets the kernel dump core to
a remote host after a panic, rather than to a local storage device.
The server component is available in the ports tree. netdump is
particularly useful on diskless systems.
The netdump(4) man page contains some details describing the protocol.
Support for configuring netdump will be added to dumpon(8) in a future
commit. To use netdump, the kernel must have been compiled with the
NETDUMP option.
The initial revision of netdump was written by Darrell Anderson and
was integrated into Sandvine's OS, from which this version was derived.
Reviewed by: bdrewery, cem (earlier versions), julian, sbruno
MFC after: 1 month
X-MFC note: use a spare field in struct ifnet
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D15253
These firmwares and the following list of changes are from the public
ChelsioUwire-3.7.1.0 release.
T6 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================
Fixes
-----
BASE:
- Fixed traffic stall when rate-limit is modified while running traffic.
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.
ETH:
- Exit Auto-Negotiation if we don't receive base page from peer within 10s.
This fixes some cases where in we keep on restarting auto negotiation without
ever exiting, resulting in link failure.
- Fixes an issue where VF packets counter were not increasing if VF packets
coalesced WR is used by driver.
OFLD:
- Kernel and user mode NVMEoF performance enhancements.
FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.
================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================
Fixes
-----
BASE:
- For Ethernet frames less than 64B, pad them with zero bytes as per IEEE spec
(RFC 894).
- Added a new parameter iqtype to FW_IQ_CMD to identify the ingress NIC or offload
queues. This fixes an issue where driver was receiving interrupt with no new
messages in queue.
- FW_PARAMS_CMD processes all the valaid paramaters and returns value 0UL for
any unknown parameter.
OFLD:
- Fixes connection failure during SRQ reuse.
- Fixes incorrect cqe in case of WRITE with immediate operation.
FOiSCSI:
- Fixes a fw crash when wrong node-id is passed to FW_FOISCSI_CTRL_WR.
FOFCoE:
- Fixes a fw hang while creating NPIV.
Enhancements
------------
ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.
================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================
Fixes
-----
BASE:
- Fixed Rate limiting not working for 101Mbps<=rate limit<=163Mbps range.
- Fixed starting more than 32 VMs on PF4 causing firmware hang.
ETH:
- Fixed link failure due to FEC mismatch with optics.
- Fixed link failure with link toggle stress tests.
- Only BaseR FEC is supported for 50G.
- Fixed a bug in next page handling which sometimes causes link down.
- Fixed port down due to failre to read eeprom contents of some modules.
- Fixed a bug causing adapter to fail with spider configuration.
FOiSCSI:
- Fixed a bug causing login failure when connecting to multiple targets.
Enhancements
------------
BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).
ETH:
- Added support for user to contol pause negotiation during auto negotiation.
FOiSCSI:
- Added a new facility to redirect few fw events to offload rx queue
(based on driver's configration)
- Driver can ignore providing ipv6 prefix len during ipv6 address configuration.
================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================
FIXES
-----
BASE:
- Fixed an FLR failure during simulteneous power up of VM.
- Fixed an issue in vlan acl which was limiting vlan range to 1024.
ETH:
- Enabled RS-FEC for 25G active copper cable and 25GBASE-SR.
- When auto negotiation is enabled, final pause settings are resolved
based on local and peer pause settings.
- Handle NACK for an I2C access.
OFLD
- Fixed rdma connection cleanup in SO adpater.
- Fixed rdma connections during read invalidate.
- Fixed the crash when invalid BW rate is passed to fw.
- Fixed the traffic hang when BW allocation is changed from switch during traffic.
FOFCoE:
- Fixed an issue where initiator remains logged-in even after LLDP is disabled
on switch.
ENHANCEMENTS
------------
BASE:
- Added support for 248 VFs.
- Added fw driver periodic calibration for MC.
ETH:
- Added XLAUI port type support.
- Added raw mac entry deletion support (FW_VI_MAC_ID_BASED_FREE).
OFLD:
- Inline IPSec support added (flag F_FW_ULPTX_WR_DATA indicates the inline
IPSec WR).
- New work request FW_RI_RDMA_WRITE_CMPL_WR (write with completion) added to
T5 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================
Fixes
-----
BASE:
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.
ETH:
- Fixes an issue where VF packets counter were not increasing if VF packets
coalesced WR is used by driver.
OFLD:
- Fixes an issue where fw hangs if max traffic rate passed is 0.
FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.
================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================
Fixes
-----
BASE:
- For Ethernet frames less than 64B, pad them with zero bytes as per IEEE spec
(RFC 894).
- Added a new parameter iqtype to FW_IQ_CMD to identify the ingress NIC or offload
queues. This fixes an issue where driver was receiving interrupt with no new
messages in queue.
ETH:
- Pad the Ethernet packets of size less than 64B with zeros. This fixes the
incorrect checksum generation of packets less then 64B.
FOiSCSI:
- Fixes a fw crash when wrong node-id is passed to FW_FOISCSI_CTRL_WR.
FOFCoE:
- Fixes a fw hang while creating NPIV.
Enhancements
------------
ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.
================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================
Fixes
-----
BASE:
- Fixed starting more than 32 VMs on PF4 causing firmware hang.
FOiSCSI:
- Fixed a bug causing login failure when connecting to multiple targets.
Enhancements
------------
BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).
ETH:
- Added support for user to contol pause negotiation during auto negotiation.
FOiSCSI:
- Added a new facility to redirect few fw events to offload rx queue
(based on driver's configration)
- Driver can ignore providing ipv6 prefix len during ipv6 address configuration.
================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================
FIXES
-----
BASE:
- Fixed an issue in vlan acl which was limiting vlan range to 1024.
ETH:
- Corrected lane inversion logic.
- Fixed improper LED behavior in T580 cards.
- When auto negotiation is enabled, final pause settings are resolved
based on local and peer pause settings.
- Handle NACK for an I2C access.
OFLD
- Fixed rdma connections during read invalidate.
FOiSCSI:
- Fixed a connections hang when link is toggled frequently.
FOFCoE:
- Fixed an issue where initiator remains logged-in even after LLDP is disabled
on switch.
ENHANCEMENTS
------------
BASE:
- Added support for 124 VFs.
ETH:
- Added XLAUI port type support.
- Added raw mac entry deletion support (FW_VI_MAC_ID_BASED_FREE).
OFLD:
- New work request FW_RI_RDMA_WRITE_CMPL_WR (write with completion) added to
optimize NVMEoF write.
T4 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================
Fixes
-----
BASE:
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.
FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.
================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================
Fixes
-----
BASE:
- Added a new paramter iqtype to FW_IQ_CMD to identify the ingress NIC or
offload queues. This fixes an issue where driver was receiving interrupt with
no new messages in queue.
FOFCoE:
- Fixes a fw hang while creating NPIV.
Enhancements
------------
ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.
================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================
Enhancements
------------
BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).
================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================
FIXES
-----
BASE:
- Fixed an issue in vlan acl which was limiting vlan range to 1024.
MFC after: 3 days
Sponsored by: Chelsio Communications
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license. Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).
Reviewed by: rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15245
Intel® Arria® 10 SoC.
Cadence Quad SPI Flash is not generic SPI controller, but SPI flash
controller, so don't use spibus here, instead provide quad spi flash
interface.
Since it is not on spibus, then mx25l flash device driver is not usable
here, so provide new n25q flash device driver with quad spi flash
interface.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10245
It is the forerunner/foundational work of bringing in both Rack and BBR
which use hpts for pacing out packets. The feature is optional and requires
the TCPHPTS option to be enabled before the feature will be active. TCP
modules that use it must assure that the base component is compile in
the kernel in which they are loaded.
MFC after: Never
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D15020
Adjust sys/conf/files and sys/modules/puc/Makefile to omit
pucdata.c now tht it's included by puc_pci.c.
Submitted by: Lakhan Shiva Kamireddy (with build fixes by me)
Pull Request: https://github.com/freebsd/freebsd/pull/136
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
SoftDMA is a software implementation of DMA engine built using Altera
FIFO component.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9620
Changelist:
- Turn tx_rings and rx_rings arrays into arrays of pointers to kring
structs. This patch includes fixes for ixv, ixl, ix, re, cxgbe, iflib,
vtnet and ptnet drivers to cope with the change.
- Generalize the nm_config() callback to accept a struct containing many
parameters.
- Introduce NKR_FAKERING to support buffers sharing (used for netmap
pipes)
- Improved API for external VALE modules.
- Various bug fixes and improvements to the netmap memory allocator,
including support for externally (userspace) allocated memory.
- Refactoring of netmap pipes: now linked rings share the same netmap
buffers, with a separate set of kring pointers (rhead, rcur, rtail).
Buffer swapping does not need to happen anymore.
- Large refactoring of the control API towards an extensible solution;
the goal is to allow the addition of more commands and extension of
existing ones (with new options) without the need of hacks or the
risk of running out of configuration space.
A new NIOCCTRL ioctl has been added to handle all the requests of the
new control API, which cover all the functionalities so far supported.
The netmap API bumps from 11 to 12 with this patch. Full backward
compatibility is provided for the old control command (NIOCREGIF), by
means of a new netmap_legacy module. Many parts of the old netmap.h
header has now been moved to netmap_legacy.h (included by netmap.h).
Approved by: hrs (mentor)
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).
Reviewed by: kib, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15017
It's had a good life, but it's not really configurable and not really used.
Obtained from: opBSD (with some changes)
Differential Revision: https://reviews.freebsd.org/D14991
The ocs_fc(4) driver supports the following hardware:
Emulex 16/8G FC GEN 5 HBAS
LPe15004 FC Host Bus Adapters
LPe160XX FC Host Bus Adapters
Emulex 32/16G FC GEN 6 HBAS
LPe3100X FC Host Bus Adapters
LPe3200X FC Host Bus Adapters
The driver supports target and initiator mode, and also supports FC-Tape.
Note that the driver only currently works on little endian platforms. It
is only included in the module build for amd64 and i386, and in GENERIC
on amd64 only.
Submitted by: Ram Kishore Vegesna <ram.vegesna@broadcom.com>
Reviewed by: mav
MFC after: 5 days
Relnotes: yes
Sponsored by: Broadcom
Differential Revision: https://reviews.freebsd.org/D11423