Onlining a vdev can fail. Log the error if it does.
Reviewed by: mav, asomers
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D30882
Xen VMs get a simulated serial device meant for use as a console. Often
an xterm or other advanced terminal is used, so use xterm as the type.
Depending on configuration, FreeBSD on Xen for amd64 may instead use an
emulated serial port, but the virtual console may also be available.
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: imp (slightly earlier version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29873
The tty lists were already pretty similar and there hadn't been any real
need for them to remain distinct for some time. As such, merge to a
single file.
The RISC-V console is preserved. For systems where it doesn't exist, its
presence in /etc/ttys is harmless. The uncommented version of the
ttyv8/XDM line from ttys.amd64 was the one chosen.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30256
Ifnet (inline) hw kTLS NICs typically keep state within
a TLS record, so that when transmitting in-order,
they can continue encryption on each segment sent without
DMA'ing extra state from the host.
This breaks down when transmits are out of order (eg,
TCP retransmits). In this case, the NIC must re-DMA
the entire TLS record up to and including the segment
being retransmitted. This means that when re-transmitting
the last 1448 byte segment of a TLS record, the NIC will
have to re-DMA the entire 16KB TLS record. This can lead
to the NIC running out of PCIe bus bandwidth well before
it saturates the network link if a lot of TCP connections have
a high retransmoit rate.
This change introduces a new sysctl (kern.ipc.tls.ifnet_max_rexmit_pct),
where TCP connections with higher retransmit rate will be
switched to SW kTLS so as to conserve PCIe bandwidth.
Reviewed by: hselasky, markj, rrs
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30908
We have to ensure that we don't link any instrumented object files
into rescue as it is a static executable and static binaries can't
use the sanitizer runtime.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D31044
UBSan complains about the `sum = sum * 127 + chrtran(t);` line below since
that can overflow an `int`. Use `unsigned int` instead to ensure that
overflow is well-defined.
Reviewed By: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31075
This is the new replacement for the existing cortex-strings code which will
be replaced in a follow-up commit.
We should also be able to use some of the math functions to allow the
tests to pass on AArch64 (and other architectures) instead of just x86.
We might also be able to reuse some of the tests for the kyua testsuite.
Imported using
```
curl -L e823e3abf5 | tar --strip-components=1 -xvzf -
git add .
```
Differential Revision: https://reviews.freebsd.org/D29035
git-subtree-dir: contrib/arm-optimized-routines
git-subtree-mainline: e34c713b0e
git-subtree-split: f9f37c002a
This prevents these tests from being compiled with ASAN since the asan
interceptors also define opendir() but matching the libc function.
Reviewed By: oshogbo, kib, markj
Differential Revision: https://reviews.freebsd.org/D31038
I was debugging why login(1) wasn't working as expected on a minimal
MFS_ROOT disk image. This image doesn't have syslogd running so the
warnings were lost and I had to use GDB to find out why login(1) was
failing (missing PAM libraries) instead of being able to see it in
the console output.
MFC after: 1 week
Reviewed By: pfg
Differential Revision: https://reviews.freebsd.org/D30892
UBSan complains about out-of-bounds accesses for zero-length arrays. To
avoid this we can use flexible array members. However, the C standard does
not allow for structures that only contain flexible array members, so we
move the length parameters into that structure too.
Split out from D28233.
Reviewed By: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31009
No functional changes. Do not MFC this, it changes kernel ABI.
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D30698
Before UMA CCBs, all CCBs were of the same size, and could
be trivially copied using bcopy(9). Now we have to preserve
alloc_flags, otherwise we might end up attempting to free
stack-allocated CCB to UMA; we also need to take CCB size
into account.
This fixes kernel panic which would occur when trying to access
a stopped (as in, SCSI START STOP, also "ctladm stop") SCSI device.
Reported By: Gary Jennejohn <gljennjohn@gmail.com>
Tested By: Gary Jennejohn <gljennjohn@gmail.com>
Reviewed By: imp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31054
With the v5.13 device-tree update speed of the CPU switch port was
changed to 2.5G. Reflect that in the driver.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
New Samsung 980 SSDs report Namespace Preferred Write Alignment of
8 (4KB) and Namespace Preferred Write Granularity of 32 (16KB).
My quick tests show that 16KB is a minimal sequential write size
when the SSD reaches peak IOPS, so writing much less is very slow.
But writing slightly less or slightly more does not change much,
so it seems not so much a size granularity as minimum I/O size.
Thinking about different stripesize consumers:
- Partition alignment should be based on NPWA by definition.
- ZFS ashift in part of forcing alignment of all I/Os should also
be based on NPWA. In part of forcing size granularity, if really
needed, it may be set to NPWG, but too big value can make ZFS too
space-inefficient, and the 16KB is actually the biggest supported
value there now.
- ZFS recordsize/volblocksize could potentially be tuned up toward
NPWG to work as I/O size granularity, but enabled compression makes
it too fuzzy. And those are normally user-configurable things.
- ZFS I/O aggregation code could definitely use Optimal Write Size
value and may be NPWG, but we don't have fields in GEOM now to report
the minimal and optimal I/O sizes, and even maximal is not reported
outside GEOM DISK to be used by ZFS.
MFC after: 1 week
In a few places, on a failed compare-and-set, both the amd64 pmap and
the arm64 pmap repeat tests on bits that won't change state while the
pmap is locked. Eliminate some of these unnecessary tests.
Reviewed by: andrew, kib, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31014
We removed sysinstall(8) back in 2011, so this workaround should be long
since unnecessary. This workaround can end up breaking cases that are
hit in the real world, such as dd'ing a small pre-built disk image to a
large partition that you intend to grow on first boot and uses a UFS
disk label for / in its /etc/fstab (as the only reliable thing a raw UFS
image can reference).
Reviewed by: imp, mckusick
Differential Revision: https://reviews.freebsd.org/D30825
Since commit 2dd1bdf183 in 2016 the r_start and r_end fields have been
rman_res_t, which was briefly unsigned long, but commit da1b038af9
changed the typedef to be uintmax_t instead. C99 is also something we
assume these days.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D30808
When calling file_findfile with only a type it returns
the first file matching the type. But in fdt_apply_overlays we
then iterate on the next files and try loading them as dtb overlays.
Fix this by checking the type one more time.
Sponsored by: Diablotin Systems
Reported by: Mark Millard <marklmi@yahoo.com>
Instead serialize against these operations with a dedicated lock.
Prior to the change, When pushing 17 mln pps of traffic, calling
DIOCRGETTSTATS in a loop would restrict throughput to about 7 mln. With
the change there is no slowdown.
Reviewed by: kp (previous version)
Sponsored by: Rubicon Communications, LLC ("Netgate")
Creating tables and zeroing their counters induces excessive IPIs (14
per table), which in turns kills single- and multi-threaded performance.
Work around the problem by extending per-CPU counters with a general
counter populated on "zeroing" requests -- it stores the currently found
sum. Then requests to report the current value are the sum of per-CPU
counters subtracted by the saved value.
Sample timings when loading a config with 100k tables on a 104-way box:
stock:
pfctl -f tables100000.conf 0.39s user 69.37s system 99% cpu 1:09.76 total
pfctl -f tables100000.conf 0.40s user 68.14s system 99% cpu 1:08.54 total
patched:
pfctl -f tables100000.conf 0.35s user 6.41s system 99% cpu 6.771 total
pfctl -f tables100000.conf 0.48s user 6.47s system 99% cpu 6.949 total
Reviewed by: kp (previous version)
Sponsored by: Rubicon Communications, LLC ("Netgate")
as a thin wrapper around native version found in sys/seqc.h.
This replaces out-of-base GPLv2-licensed code used by drm-kmod.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D31006
strscpy copies the src string, or as much of it as fits, into the dst
buffer. The dst buffer is always NUL terminated, unless it's zero-sized.
strscpy returns the number of characters copied (not including the
trailing NUL) or -E2BIG if len is 0 or src was truncated.
Currently drm-kmod replaces strscpy with strncpy that is not quite
correct as strncpy does not NUL-terminate truncated strings and returns
different values on exit.
Reviewed by: hselasky, imp, manu
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D31005
This allows to remove unimplemented attrs parameter which type differs
between Linux kernel versions and to compile both drm-kmod and ofed
callers unmodified.
Also convert it to 'unsigned long' type to match modern Linuxes.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D30932
Linux docs explicitly state that this is not required [1]:
"Important note: The rcu_barrier() function is not, repeat, not,
obligated to wait for a grace period. It is instead only required to
wait for RCU callbacks that have already been posted. Therefore, if
there are no RCU callbacks posted anywhere in the system, rcu_barrier()
is within its rights to return immediately. Even if there are
callbacks posted, rcu_barrier() does not necessarily need to wait for
a grace period."
[1] https://www.kernel.org/doc/Documentation/RCU/Design/Requirements/Requirements.html
Reviewed by: emaste, hselasky, manu
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30809
so this list-traversal primitive may safely run concurrently with the
_rcu list-mutation primitives such as list_add_rcu() as long as the
traversal is guarded by rcu_read_lock().
Do it by reusing the "list_for_each_entry_rcu" macro which does the same.
On Linux it implements some additional lockdep stuff which we skip.
Also move the macro to linux/rculist.h where it resides on Linux.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D30795
as it is required by i915kms driver from Linux kernel v 5.5.
This is done with asynchronous freeing of requested memory areas from
taskqueue thread. As memory to be freed is reused to store linked list
entry, backing UMA zone item size is rounded up to pointer size.
While here, make struct linux_kmem_cache private to LKPI to reduce amount
of BSD headers included by linux/slab.h and switch RCU code to usage of
LKPI's linux_irq_work_tq taskqueue to avoid injection of current into
system-wide taskqueue_fast thread context.
Submitted by: nc (initial version for drm-kmod)
Reviewed by: manu, nc
Differential revision: https://reviews.freebsd.org/D30760
The kernel part of ipfw(8) does initialize LibAlias uncondistionally
with an zeroized port range (allowed ports from 0 to 0). During
restucturing of libalias, port ranges are used everytime and are
therefor initialized with different values than zero. The secondary
initialization from ipfw (and probably others) overrides the new
default values and leave the instance in an unfunctional state. The
obvious solution is to detect such reinitializations and use the new
default value instead.
MFC after: 3 days
Only ESRT and PROP tables are handled at the moment.
Submitted by: Pavel Balaev <pavel.balaev@3mdeb.com>
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30104
Make it work, but change the interface to be safe for non-root users. In
particular, right now interface only works for the tables which can be
minimally parsed by kernel to determine the table size. Then, userspace can
query the table size, after that it provides a buffer of needed size
and kernel copies out just table to userspace.
Main advantage is that user no longer need to be able to read /dev/mem,
the disadvantage is the need to have minimal parsers aware of the table
types. Right now the parsers are implemented for ESRT and PROP tables.
Future extension of the present interface might be a return of only
the table physical address, in case kernel does not have suitable
parser yet. Then, a privileged user could read the table from /dev/mem.
This extension, which logically equivalent to the old (non-worked)
EFIIOC_GET_TABLE variant, is not implemented until needed.
Submitted by: Pavel Balaev <pavel.balaev@3mdeb.com>
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30104
This makes prctl(2) support PR_SET_NO_NEW_PRIVS, by mapping it
to the native PROC_NO_NEW_PRIVS_CTL procctl(2).
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D30973
