Freed ctx is used in the later callee ocs_hw_command(),
which is a use after free bug.
Return error if sli_cmd_common_nop() failed.
PR: 255865
Reported by: lylgood@foxmail.com
Approved by:: markj
SAM-3 specification introduced concept of Task Priority, that was renamed
to Command Priority in SAM-4, and supported by all modern SCSI transports.
It provides 15 levels of relative priorities: 1 - highest, 15 - lowest and
0 - default. SAT specification for SATA devices translates priorities 1-3
into NCQ high priority.
This change adds new "priority" field into empty spots of struct ccb_scsiio
and struct ccb_accept_tio of CAM and struct ctl_scsiio of CTL. Respective
support is added into iscsi(4), isp(4), mpr(4), mps(4) and ocs_fc(4) drivers
for both initiator and where applicable target roles. Minimal support was
added to CTL to receive the priority value from different frontends, pass it
between HA controllers and report in few places.
This patch does not add consumers of this functionality, so nothing should
really change yet, since the field is still set to 0 (default) on initiator
and not actively used on target. Those are to be implemented separately.
I've confirmed priority working on WD Red SATA disks connected via mpr(4)
and properly transferred to CTL target via iscsi(4), isp(4) and ocs_fc(4).
While there, added missing tag_action support to ocs_fc(4) initiator role.
MFC after: 1 month
Relnotes: yes
Sponsored by: iXsystems, Inc.
ocs_scsi_recv_cmd() receives the flags after ocs_get_flags_fcp_cmd(),
which translates them from FCP_TASK_ATTR_* to OCS_SCSI_CMD_*. As result
non-SIMPLE requests turned into HEAD or ORDERED depending on direction.
MFC after: 2 weeks
This pattern is used in callbacks with void * data arguments and seems
both relatively uncommon and relatively harmless. Silence the warning
by casting through uintptr_t.
This warning is on by default in Clang 11.
Reviewed by: arichardson
Obtained from: CheriBSD (partial)
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24425
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Eliminate recursion from most thread_lock consumers. Return from
sched_add() without the thread_lock held. This eliminates unnecessary
atomics and lock word loads as well as reducing the hold time for
scheduler locks. This will eventually allow for lockless remote adds.
Discussed with: kib
Reviewed by: jhb
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22626
Note that the affected interface is available only to root.
admbugs: 765
Reported by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Reviewed by: emaste, ram
MFC after: 1 day
Security: Kernel memory disclosure
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18914
Issue:
ocs_fc(4) driver panics. It's induced by setting the port_state
sysctl to offline, then online, then offline, then online, and so
forth and so on in rapid succession.
Reason:
While we set the port_state to online fc discovery will start and OS
is enumerating the target discs by calling ocs_action(), then set the
port state to "offline" which deletes domain/sport/nodes.
In ocs_action()->XPT_GET_TRAN_SETTINGS we are accessing the remote
node which can be invalid to get the wwpn, wwnn and port.
Fix:
Removed accessing of remote node and domain in some ocs_action() cases.
Populated the required values from ocs_fcport.
This removes the dependency of node and domain structures while
processing XPT_PATH_INQ and XPT_GET_TRAN_SETTINGS.
We will invalidate the target entries after the device lost
timeout(30 seconds).
Approved by: ken, mav
MFC after: 3 weeks
Issue: IO fails immediately after doing port-toggle.
Fix: Added LDT(Device Lost Timer)- we wait a specific period of time prior to telling the OS about lost device.
Approved by: ken, mav
MFC after: 3 days
Differential Revision: D16196
Add a few intermediate casts to uintptr_t to suppress "cast to pointer
from integer of different size" warnings from gcc. Also remove a few
incorrect casts.
Reviewed by: ram
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15747
Utility hangs when OCS_IOCTL_CMD_MGMT_GET_ALL called in parallel on port 0 and port 1.
Fix: Using static structure for results is corrupting the second ioctl request. Removed static for results structure.
Approved by: ken
MFC after: 3 days
sys/dev/ocs/ocs_os.c:
In ocs_thread_create(), use sizeof(*thread) (instead of
sizeof(thread)) as the size argument to memset so that we clear
out the entire thread structure instead of just a few bytes of it.
Submitted by: jtl
MFC after: 3 days
These objects are defined earlier in the same file; an extern declaration
after definition is redundant.
Broken in r331766 (introduction of ocs_fc(4)).
Sponsored by: Dell EMC Isilon
The ocs_fc(4) driver supports the following hardware:
Emulex 16/8G FC GEN 5 HBAS
LPe15004 FC Host Bus Adapters
LPe160XX FC Host Bus Adapters
Emulex 32/16G FC GEN 6 HBAS
LPe3100X FC Host Bus Adapters
LPe3200X FC Host Bus Adapters
The driver supports target and initiator mode, and also supports FC-Tape.
Note that the driver only currently works on little endian platforms. It
is only included in the module build for amd64 and i386, and in GENERIC
on amd64 only.
Submitted by: Ram Kishore Vegesna <ram.vegesna@broadcom.com>
Reviewed by: mav
MFC after: 5 days
Relnotes: yes
Sponsored by: Broadcom
Differential Revision: https://reviews.freebsd.org/D11423