- Provide pf_altq.h that has only stuff needed for ALTQ.
- Start pf.h, that would have all constant values and
eventually non-kernel structures.
- Build ALTQ w/o pfvar.h, include if_var.h, that before
came via pollution.
- Build tcpdump w/o pfvar.h.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
interface. Make MII drivers forget about 'struct ifnet'.
Later plan is to provide an administrative downcall from ifnet
layer into drivers, to inform them about administrative status
change. If someone thinks that processing MII events for an
administratively down interface is a big problem, then drivers
would turn MII processing off.
The following MII drivers do evil things, like strcmp() on
driver name, so they still need knowledge of ifnet and thus
include if_var.h. They all need to be fixed:
sys/dev/mii/brgphy.c
sys/dev/mii/e1000phy.c
sys/dev/mii/ip1000phy.c
sys/dev/mii/jmphy.c
sys/dev/mii/nsphy.c
sys/dev/mii/rgephy.c
sys/dev/mii/truephy.c
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
/chosen, following the list of allowed console properties in ePAPR. Also
do not require that stdin be defined and equal to stdout: stdin is
nonstandard (for ePAPR) and console in an unexpected place is after all
better than no console.
- Remove explicit requirement that the SOC registers be found except as an
optimization (although the MPC85XX LAW drivers still require they be found
externally, which should change).
- Remove magic CCSRBAR_VA value.
- Allow bus_machdep.c's early-boot code to handle non 1:1 mappings and
systems not in real-mode or global 1:1 maps in early boot.
- Allow pmap_mapdev() on Book-E to reissue previous addresses if the
area is already mapped. Additionally have it check all mappings, not
just the CCSR area.
This allows the console on e500 systems to actually work on systems where
the boot loader was not kind enough to set up a 1:1 mapping before starting
the kernel.
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
All Armada XP chips should be affected. It is necessary to handle
busy interrupt/indication by enabling busy-detect property in DTS.
Tested by: kevlo
Approved by: cognet (mentor)
When using DW UART with BUSY detection it is necessary to wait
until all serial transfers are finished before manipulating the
line control. LCR will not be affected when UART is busy.
In addition, if Divisor Latch Access Bit is being set in order to
modify UART divisors:
1. We will get BUSY interrupt if interrupts are enabled.
2. Because LCR will not be affected the THR and (even worse) IER
contents will be corrupted. This will lead to console hang.
Approved by: cognet (mentor)
when -u is specified it is not...
update the docs to say that you can use full device names w/ -u, and
update the examples...
Submitted by: #vbsdcon
MFC after: 3 days
Use it universally. Book-E traps may also need revisiting due to the
introduction of fixed-offset traps and the deprecation of IVORs in POWER
ISA 2.06, but that's very much an issue for another day.
is slightly more complicated and is left unimplemented for now. Also
prevent pmap_mapdev() from mapping over the kernel and KVA regions if
devices happen to have high physical addresses.
MFC after: 2 weeks
This is believed to fix hastd crashes, which might occur during
synchronization, triggered by the failed assertion:
Assertion failed: (amp->am_memtab[ext] > 0),
function activemap_write_complete, file activemap.c, line 351.
MFC after: 1 week
* Remove the unused sdt cdev.
* Don't bother keeping a list of probes in struct sdt_prov; it's not needed.
* Invoke sdt_load and sdt_unload from the module handler instead of
registering separate SYSINITs.
* Keep to within 80 columns.
* Check for errors from dtrace_unregister().
added with "pkg add". If the pkg.conf is configured to check for
signature, then the pkg.txz.sig file will be expected and validated
per r257147
Approved by: bapt
MFC after: 2 days
If the pkg.conf is configured with SIGNATURE_TYPE: FINGERPRINTS,
and FINGERPRINTS: /etc/keys/pkg then a pkg.sig file is fetched along
with pkg.txz. The signature contains the signature provided by the
signing server, and the public key. The .sig is the exact output
from the signing server in the following format:
SIGNATURE
<openssl signed>
CERT
<rsa public key>
END
The signature is verified with the following logic:
- If the .sig file is missing, it fails.
- If the .sig doesn't validate, it fails.
- If the public key in the .sig is not in the known trusted fingerprints,
it fails.
- If the public key is in the revoked key list, it fails.
Approved by: bapt
MFC after: 2 days
Discussed by: bapt with des, jonathan, gavin
For now only /etc/pkg/FreeBSD.conf is supported. Its style is:
Repo: {
URL: "...",
MIRROR_TYPE: "...",
...
}
The configuration will be read from /usr/local/etc/pkg.conf if exists,
otherwise /etc/pkg/FreeBSD.conf
Approved by: bapt
MFC after: 2 days
the code was trying to save the stack pointer rather than the frame pointer,
and the arguments to copyout(9) were reversed, so nothing ended up being
saved on the stack. This would cause process crashes when the pid provider
was being used to instrument calls of a function starting with this
instruction.
Reported by: symbolics@gmx.com
Tested by: symbolics@gmx.com (earlier version)
MFC after: 2 weeks
This is "STA invalid". I saw it during some 4965 testing (kern/183260)
and I still have no idea what is causing it.
Obtained from: Linux drivers/net/wireless/iwlegacy
Some firmware versions seem to get very unhappy if they're sent btcoex
commands when they don't actually have bluetooth hardware in them.
So, disable sending them those commands.
Tested:
* 5100 (which has bluetooth, no problems)
* 4965 (which doesn't have bluetooth, but didn't seem to crash)
* 6200 (no bluetooth, seems to get unhappy being sent bluetooth commands.)
index lookups.
* My recent(ish) change to iwn(4) and the net80211 rate control API to
support 11n rates broke the link quality table use. So, until I or
someone else decides to fix it, let's just disable it for now.
* Teach iwn_tx_data_raw() to use the iwn_rate_to_plcp() function.
* Eliminate two uses of the net80211 rate index lookup functions - they
are only for legacy rates and they're not needed here.
This fixes some invalid looking rate control TX issues that showed up
on my 4965 but it doesn't fix the two TX hangs I've noticed. Those look
like DMA related issues.
Tested:
* 4965, STA mode
* 5100, STA mode
associates compat strings with arbitrary values that mean something to
the driver. This is handy for drivers that support several variations
of similar hardware and need to know which one matched.
Reviewed by: imp, jmg, nwhitehorn
