of various scattered magic values.
- Pretty print the address of hardware watchpoints in 'show watch' rather
than just displaying hex.
- Expand address field width on amd64 for 64-bit pointers.
- Drop the printf in intr_machdep.c when we assign an interrupt souce to
a CPU. Each source already has a more detailed printf.
- Don't output a line for each ioapic pin showing its initial state, this
has outlived its usefulness.
- When an APIC enumerator sets the bus, polarity, or trigger mode of an
ioapic pin, just return success without printing anything if the new
value matches the current one.
MFC after: 2 weeks
events. &p->p_stype is explicitely woken up on process exit for us.
Now, truss /nonexistent exits with error instead of waiting until killed
by signal.
Reported by: Nikos Vassiliadis nvass at teledomenet gr
Reviewed by: jhb
MFC after: 1 week
This allows us to play nicely on SANs when we have target mode
enabled in f/w but have neither the scsi_targbh enabled or
scsi_targ with a target enabled.
accidentally truncating off the VLAN tag field in the TX descriptor. Fix
this by splitting up the vlan_tag and flags fields into separate fields,
and handling them appropriately.
Sponsored by: Ironport
MFC After: 3 days
descriptor's mbuf pointer to see if the transmit ring is full. The
mbuf pointer is set only in the last descriptor of a
multi-descriptor packet. By relying on the mbuf pointers of the
earlier descriptors, the driver would sometimes overwrite a
descriptor belonging to a packet that wasn't completed yet. Also,
tx_chain_prod wasn't updated inside the loop, causing the wrong
descriptor to be checked after the first iteration. The upshot of
all this was the loss of some transmitted packets at medium to high
packet rates.
In bce_tx_encap, remove a couple of old statements that shuffled
around the tx_mbuf_map pointers. These now correspond 1-to-1 with
the transmit descriptors, and they are not supposed to be changed.
Correct a couple of inaccurate comments.
MFC after: 1 month
which allows to use it with different kinds of locks. For example it allows
to implement Solaris conditions variables which will be used in ZFS port on
top of sx(9) locks.
Reviewed by: jhb
Only complain about FC Reponse errors if they're nonzero.
Shorten some PortID printouts for local loop.
Add an internal isp_xcmd_t data structure which we'll use for some
CT-Passthru support as part of adding SMI-S.
channel for tsleep():
- Allow tsleep() on &lbolt without Giant with a timeout 0 since &lbolt has
an implied timeout.
- If &lbolt is used with msleep() pass NULL to sleepq_add() for the lock
object. Unlike other sleepq channels, &lbolt doesn't have an associated
owning lock.
This fix lets clone02 LTP test pass with 2.6 emulation. In reality 99%
of the cases are that CLONE_VM and CLONE_THREAD are both set so it
seemed to work.
Submitted by: rdivacky
__WCLONE. This fixes it thus fixing skype/teamspeak to not keep zombies
after exit.
Submitted by: rdivacky
Reported by: Bakul Shah (bakul at bitblocks com)
- Add a translation so the Linux ioctl's don't conflict with
the FreeBSD definition.
- Assume Linux 32bit emulation on amd64.
This was tested on i386 and amd64 with the 32bit Linux MegaCli.
Eventually we should do a 32bit native FreeBSD translation app.
gone device timers and zombie state entries. There are tunables
that can be used to select a number of parameters.
loop_down_limit - how long to wait for loop to come back up before
declaring
all devices dead (default 300 seconds)
gone_device_time- how long to wait for a device that has appeared
to leave the loop or fabric to reappear (default 30 seconds)
Internal tunables include (which should be externalized):
quick_boot_time- how long to wait when booting for loop to come up
change_is_bad- whether or not to accept devices with the same
WWNN/WWPN that reappear at a different PortID as being the 'same'
device.
Keen students of some of the subtle issues here will ask how
one can keep devices from being re-accepted at all (the answer
is to set a gone_device_time to zero- that effectively would
be the same thing).
- Add a new apic_alloc_vectors() method to the local APIC support code
to allocate N contiguous IDT vectors (aligned on a M >= N boundary).
This function is used to allocate IDT vectors for a group of MSI
messages.
- Add MSI and MSI-X PICs. The PIC code here provides methods to manage
edge-triggered MSI messages as x86 interrupt sources. In addition to
the PIC methods, msi.c also includes methods to allocate and release
MSI and MSI-X messages. For x86, we allow for up to 128 different
MSI IRQs starting at IRQ 256 (IRQs 0-15 are reserved for ISA IRQs,
16-254 for APIC PCI IRQs, and IRQ 255 is reserved).
- Add pcib_(alloc|release)_msi[x]() methods to the MD x86 PCI bridge
drivers to bubble the request up to the nexus driver.
- Add pcib_(alloc|release)_msi[x]() methods to the x86 nexus drivers that
ask the MSI PIC code to allocate resources and IDT vectors.
MFC after: 2 months
- Add 3 new functions to the pci_if interface along with suitable wrappers
to provide the device driver visible API:
- pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count'
here is an in and out parameter. The driver stores the desired number
of messages in '*count' before calling the function. On success,
'*count' holds the number of messages allocated to the device. Also on
success, the driver can access the messages as SYS_RES_IRQ resources
starting at rid 1. Note that the legacy INTx interrupt resource will
not be available when using MSI. Note that this function will allocate
either MSI or MSI-X messages depending on the devices capabilities and
the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note
that the driver should activate the memory resource that holds the
MSI-X table and pending bit array (PBA) before calling this function
if the device supports MSI-X.
- pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function
releases the messages allocated for this device. All of the
SYS_RES_IRQ resources need to be released for this function to succeed.
- pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns
the maximum number of MSI or MSI-X messages supported by this device.
MSI-X is preferred if present, but this function will honor the
'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function
should return the largest value that pci_alloc_msi() can return
(assuming the MD code is able to allocate sufficient backing resources
for all of the messages).
- Add default implementations for these 3 methods to the pci_driver generic
PCI bus driver. (The various other PCI bus drivers such as for ACPI and
OFW will inherit these default implementations.) This default
implementation depends on 4 new pcib_if methods that bubble up through
the PCI bridges to the MD code to allocate IRQ values and perform any
needed MD setup code needed:
- PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages.
- PCIB_RELEASE_MSI() releases a group of MSI messages.
- PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message.
- PCIB_RELEASE_MSIX() releases a single MSI-X message.
- Add default implementations for these 4 methods that just pass the
request up to the parent bus's parent bridge driver and use the
default implementation in the various MI PCI bridge drivers.
- Add MI functions for use by MD code when managing MSI and MSI-X
interrupts:
- pci_enable_msi(dev, address, data) programs the MSI capability address
and data registers for a group of MSI messages
- pci_enable_msix(dev, index, address, data) initializes a single MSI-X
message in the MSI-X table
- pci_mask_msix(dev, index) masks a single MSI-X message
- pci_unmask_msix(dev, index) unmasks a single MSI-X message
- pci_pending_msix(dev, index) returns true if the specified MSI-X
message is currently pending
- Save the MSI capability address and data registers in the pci_cfgreg
block in a PCI devices ivars and restore the values when a device is
resumed. Note that the MSI-X table is not currently restored during
resume.
- Add constants for MSI-X register offsets and fields.
- Record interesting data about any MSI-X capability blocks we come
across in the pci_cfgreg block in the ivars for PCI devices.
Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X)
Reviewed by: scottl, grehan, jfv
MFC after: 2 months
- Remove an extra entry from the array for 0x0f prefixed instruction groups.
This fixes decoding of instructions where the second opcode >= 0x80.
- Add support for the 64-bit immediate mov instructions.
- When short_addr is enabled, don't parse the modr/m byte for a 16-bit
address, but as a 32-bit address.
- Support %rip relative addressing.
- Don't print a displacement of 0 if there is a base or index register.
MFC after: 3 days
of NKPT is no longer enough to run amd64 with 16G of RAM, as it
doesn't have space for mapping a kernel (16M kernel would require
additionally 8 page tables).
We are not yet aware of the protocol internals but this way
SCTP traffic over v6 will not be discarded.
Reported by: Peter Lei via rrs
Tested by: Peter Lei <peterlei cisco.com>
written to the socket). The rewrite in revision 1.240 got confused by the
FreeBSD 4.x bug compatibility code.
For some reason lighttpd, that was used for testing the new sendfile code,
was not affected by the problem but apache and others using headers/trailers
in the sendfile call received incorrect sbytes values after return from non-
blocking sockets. This then lead to restarts with wrong offsets and thus
mixed up file contents when the socket was writeable again. All programs
not using headers/trailers, like ftpd, were not affected by the bug.
Reported by: Pawel Worach <pawel.worach-at-gmail.com>
Tested by: Pawel Worach <pawel.worach-at-gmail.com>
not being aquired. This meant that when we cleanup
the outbound we may have one in transit to be
added with the old sequence number. This is bad
since then we loose a message :(
Also the report_outbound needed to have the right
lock when its called which it did not.. I added
the lock with of course a flag since we want to
have the lock before we call it in the restart
case.
This also fixed the FIX ME case where, in the cookie
collision case, we mark for retransmit any that
were bundled with the cookie that was dropped.
This also means changes to the output routine
so we can assure getting the COOKIE-ACK sent
BEFORE we retransmit the Data.
Approved by: gnn
a colliding INIT. This if fine except when we have
data outstanding... we basically reset it to the
previous value it was.. so then we end up assigning
the same TSN to two different data chunks.
This patch:
1) Finds a missing lock for when we change the stream
numbers during COOKIE and INIT-ACK processing.. we
were NOT locking the send_buffer.. which COULD cause
problems (found by inspection looking for <2>)
2) Fixes a case during a colliding INIT where we incorrectly
reset the sending Sequence thus in some cases duplicately
assigning a TSN.
3) Additional enhancments to logging so we can see strm/tsn in
the receiver AND new tracking to watch what the sender
is doing with TSN and STRM seq's.
Approved by: gnn
wait (time waited to acquire) and hold times for *all* kernel locks. If
the architecture has a system synchronized TSC, the profiling code will
use that - thereby minimizing profiling overhead. Large chunks of profiling
code have been moved out of line, the overhead measured on the T1 for when
it is compiled in but not enabled is < 1%.
Approved by: scottl (standing in for mentor rwatson)
Reviewed by: des and jhb
or ia64.
The old message implied to me that ACPI can't be compiled in on platforms
other than amd64 and ia64. The amd64@ mailing list archive has messages
from users with the same confusion.
Approved by: scottl
We were calling select_a_tag() inside sctp_send_initate_ack().
During collision cases we have a stcb and thus a SCTP_LOCK. When
we call select_a_tag it (below it) locks the INFO lock. We now
1) pre-select the nonce-tie-tags in sctputil.c during setup of
a tcb.
2) In the other case where we have to select tags, we unlock after
incr the ref cnt (so assoc won't go away0 and then do the
tag selection followed by a relock and decr the refcnt.
Approved by: gnn
- Each stp port is added sequentially so it was possible for our bridgeid to
change every time because the new port has a lower MAC address. Instead
just find the lowest MAC address from all Ethernet adapters in the machine
as the value only needs to be unique, this stops a lot of churn on the
protocol.
- Update the states after enabling or disabling a port.
- Keep tabs if we have been stopped or started by our parent bridge.
- The callout only needs to be drained before destroying the mutex, move it to
bstp_detach.
reset comes in we need to calculate the length and
therefore the number of listed streams (if any) based
on the TLV type. Otherwise if we get a retran we could
in theory panic by sending a notification to a user with
a incorrect list and thus no memory listing the streams.
Found in IOS by devtest :-)
Approved by: gnn
our own watchdog that piggybacks on the em_local_timer() routine.
We suppose that the if_timer/if_watchdog interface should be
obsoleted, since it doesn't fit the modern SMP network stack.
NIC drivers should create their own watchdogs, that check and
clear the timers always holding driver's lock.
In collaboration with: jfv, scottl
address learned by the bridge is made permanent, the address will not age out
and most importantly will not migrate to another interface.
This can be used to stop mac address poisoning or clients roaming in much the
same way as static entries without the hassle of preloading the table.
after the interrupt has been handled. Also move panic_bad_hcall to local to
avoid complaints from the linker on the tinderbox.
Approved by: scottl (substituting for mentor rwatson)
copy's were incorrect and so was the locking.
-A bug was also found that would create a race and
panic when an abort arrived on a socket being read
from.
-Also fix the reader to get MSG_TRUNC when a partial
delivery is aborted.
-Also addresses a couple of coverity caught error path
memory leaks and a couple of other valid complaints
Approved by: gnn
- Don't drop the lock just to reacquire it again to check rushjob, this
only wastes time.
- Use msleep() to drop the mutex while sleeping instead of explicitly
unlocking around tsleep.
Reviewed by: pjd
by this driver and largely are not even PCI devices in pcn_chipid.
- Use device_printf(9)/if_printf(9) rather than implementing their
functionality with printf(9).
- Sprinkle some const.
- Only call iwi_stop() if we got far enough along in iwi_attach() to
alloc an ifnet.
- Release the firmware after stopping the interface and detaching the
ifnet.
MFC after: 1 month
Reviewed by: sam
linux siginfo structure. l_sigval uses a l_uintptr_t for sival_ptr so
that sival_ptr is the right size for linux32 on amd64. Since no code
currently uses 'lsi_ptr' this is just a cosmetic nit rather than a bug
fix.
label after the sbunlock() part.
This correctly handles calls to sendfile(2) without valid parameters
that was broken in rev. 1.240.
Coverity error: 272162
to be switched to is saved in sc->delayed_next_scr and
the actual switch is performed later. It was possible
to get into the endless loop when attempting to switch
to a closed vty (which is not allowed and beep-alerted
when attempted) and when the visual beep was in effect.
This caused sc->delayed_next_scr to never be reset and
endless attempts to switch to a closed vty and endless
visual beeping. How to repeat:
- boot into single-user
- run "kbdcontrol -b visual"
- quickly press Alt+F2 two times
PR: kern/68016
X-MFC after: 6.2-RELEASE
patch was prepared and committed to priv(9) calls. Add XXX comments
as, in each case, the semantics appear to differ from the TCP/UDP
versions of the calls with respect to jail, and because cr_canseecred()
is not used to validate the query.
Obtained from: TrustedBSD Project
to wakeup on close of the sender. It basically moves
the return (when the asoc has a reader/writer) further
down and gets the wakeup and assoc appending (of the
PD-API event) moved up before the return. It also
moves the flag set right before the return so we can
assure only once adding the PD-API events.
Approved by: gnn
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
privilege for threads and credentials. Unlike the existing suser(9)
interface, priv(9) exposes a named privilege identifier to the privilege
checking code, allowing more complex policies regarding the granting of
privilege to be expressed. Two interfaces are provided, replacing the
existing suser(9) interface:
suser(td) -> priv_check(td, priv)
suser_cred(cred, flags) -> priv_check_cred(cred, priv, flags)
A comprehensive list of currently available kernel privileges may be
found in priv.h. New privileges are easily added as required, but the
comments on adding privileges found in priv.h and priv(9) should be read
before doing so.
The new privilege interface exposed sufficient information to the
privilege checking routine that it will now be possible for jail to
determine whether a particular privilege is granted in the check routine,
rather than relying on hints from the calling context via the
SUSER_ALLOWJAIL flag. For now, the flag is maintained, but a new jail
check function, prison_priv_check(), is exposed from kern_jail.c and used
by the privilege check routine to determine if the privilege is permitted
in jail. As a result, a centralized list of privileges permitted in jail
is now present in kern_jail.c.
The MAC Framework is now also able to instrument privilege checks, both
to deny privileges otherwise granted (mac_priv_check()), and to grant
privileges otherwise denied (mac_priv_grant()), permitting MAC Policy
modules to implement privilege models, as well as control a much broader
range of system behavior in order to constrain processes running with
root privilege.
The suser() and suser_cred() functions remain implemented, now in terms
of priv_check() and the PRIV_ROOT privilege, for use during the transition
and possibly continuing use by third party kernel modules that have not
been updated. The PRIV_DRIVER privilege exists to allow device drivers to
check privilege without adopting a more specific privilege identifier.
This change does not modify the actual security policy, rather, it
modifies the interface for privilege checks so changes to the security
policy become more feasible.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
sockaddr_storage. This structure is defined in RFC 2553 and is a more
semantically correct structure for holding IP and IP6 sockaddr information.
struct sockaddr is not big enough to hold all the required information for
IP6, resulting in truncated addresses et al when auditing IP6 sockaddr
information.
We also need to assume that the sa->sa_len has been validated before the call to
audit_arg_sockaddr() is made, otherwise it could result in a buffer overflow.
This is being done to accommodate auditing of network related arguments (like
connect, bind et al) that will be added soon.
Discussed with: rwatson
Obtained from: TrustedBSD Project
MFC after: 2 weeks
1. Make libefi portable by removing ia64 specific code and build
it on i386 and amd64 by default to prevent regressions. These
changes include fixes and improvements over previous code to
establish or improve APIs where none existed or when the amount
of kluging was unacceptably high.
2. Increase the amount of sharing between the efi and ski loaders
to improve maintainability of the loaders and simplify making
changes to the loader-kernel handshaking in the future.
The version of the efi and ski loaders are now both changed to 1.2
as user visible improvements and changes have been made.
This also moves two 16 bit int's to become 32 bit
values so we do not have to use atomic_add_16.
Most of the changes are %p, casts and other various
nasty's that were in the orignal code base. With this
commit my machine will now do a build universe.. however
I as yet have not tested on a 64bit machine .. it may not work :-(
it as a default.
For the record, the KDTRACE option caused _no_ additional source files
to be compiled in; certainly no CDDL source files. All it did was to
allow existing BSD licensed kernel files to include one or more CDDL
header files.
By removing this from DEFAULTS, the onus is on a kernel builder to add
the option to the kernel config, possibly by including GENERIC and
customising from there. It means that DTrace won't be a feature
available in FreeBSD by default, which is the way I intended it to be.
Without this option, you can't load the dtrace module (which contains
the dtrace device and the DTrace framework). This is equivalent to
requiring an option in a kernel config before you can load the linux
emulation module, for example.
I think it is a mistake to have DTrace ported to FreeBSD, but not
to have it available to everyone, all the time. The only exception
to this is the companies which distribute systems with FreeBSD embedded.
Those companies will customise their systems anyway. The KDTRACE
option was intended for them, and only them.
we never initialize it to anything else. However, in the case that
m_uiotombuf fails, we return error (effectively reporting success).
This appears to be a relic of an older revision of this file, where
"error" used to be doing something useful. (See revision 1.1, where
error is used in a loop with uiomove() instead of using m_uiotomubf).
So instead on unconditionally reporting success in the case there is
a failure in m_uiotombuf, explicitly return ENOBUFS. While we are
here, garbage collect the error variable since it's no longer required.
MFC after: 2 weeks
to, previously it was always broadcast to all interfaces (a bug). This is
useful when the bridge is the default gateway and vlans are used to isolate
each client, the reply is now kept private to the vlan which the client
resides.
Reported by: Jon Otterholm
Tested by: Jon Otterholm
MFC after: 3 days
adds the hooks that DTrace modules register with, and adds a few functions
which have the dtrace_ prefix to allow the DTrace FBT (function boundary
trace) provider to avoid tracing because they are called from the DTtrace
probe context.
Unlike other forms of tracing and debug, DTrace support in the kernel
incurs negligible run-time cost.
I think the only reason why anyone wouldn't want to have kernel support
enabled for DTrace would be due to the license (CDDL) under which DTrace
is released.
and to make user-level trap handlers work
- add new trap entry to trap table to enable fast fetching of floating point trap
context
- remove unused debug code
- map unimplemented floating point trap to SIGFPE
Approved by: scottl (standing in for mentor rwatson)
the correct syscalls.master's $FreeBSD$ tag record and
a make sysent in sys/compat/freebsd32. Thanks Ruslan
for pointing out the steps I missed :-0
Approved by: gnn
inserted a few to the new files.. but I falied to
add the #include <sys/cdef.h>
Which causes a compile error.. sorry about that... got it
now :-)
Approved by:gnn
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.comtuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0
So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.
I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)
There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..
If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)
Reviewed by: gnn
Approved by: gnn
o Fix the packet statistics
o Make sure we set the FD bit when in full duplex
o Improve TX side efficency by eliminating a data copy for
unfragmented mbufs (the hardware can't do s/g).
o Minor busdma pedantry
o better comments in some places, more XXX in others
o Minor style nits.
This solves a problem I was seeing where I'd get no ethernet when not
booting with a NFS root. Well, unless I unplugged the cable and
plugged it back in first so I'd get the same up down up messages I get
for NFS root...
Thanks to sam and scottl for suggestions on making this driver more
efficient through better use of approrpiate APIs.
the ORDERED tag. This recoups significant performance gains for many
arrays.
The default is still to send out the ORDERED tag periodically.
Reviewed by: scsi (justin+timeout)
to do the userland to kernel copying in sosend_generic() and sosend_dgram().
sosend_copyin() is retained for ZERO_COPY_SOCKETS which are not yet supported
by m_uiotombuf().
Benchmaring shows significant improvements (95% confidence):
66% less cpu (or 2.9 times better) with new sosend vs. old sosend (non-TSO)
65% less cpu (or 2.8 times better) with new sosend vs. old sosend (TSO)
(Sender AMD Opteron 852 (2.6GHz) with em(4) PCI-X-133 interface and receiver
DELL Poweredge SC1425 P-IV Xeon 3.2GHz with em(4) LOM connected back to back
at 1000Base-TX full duplex.)
Sponsored by: TCP/IP Optimization Fundraise 2005
MFC after: 3 month
mbuf clusters. Add a flags parameter to accept M_PKTHDR and M_EOR mbuf
chain flags. Provide compatibility macro for m_getm() calling m_getm2()
with M_PKTHDR set.
Rewrite m_uiotombuf() to use m_getm2() for mbuf allocation and do the
uiomove() in a tight loop over the mbuf chain. Add a flags parameter to
accept mbuf flags to be passed to m_getm2(). Adjust all callers for the
extra parameter.
Sponsored by: TCP/IP Optimization Fundraise 2005
MFC after: 3 month
to get the physical address doesn't work for all values of KVA_PAGES,
while masking 8 MSBs works for all values of KVA_PAGES that are
multiple of 4 for non-PAE and 8 for PAE. (This leaves us limited
with 12MB for non-PAE kernels and 14MB for PAE kernels.)
To get things right, we'd need to subtract the KERNBASE from the
virtual address (but KERNBASE is not easy to figure out from here),
or have physical addresses set properly in the ELF headers.
Discussed with: jhb
VM pages into mbufs as it can -- up to the free send socket buffer space.
The outer loop then drops the whole mbuf chain into the send socket buffer,
calls tcp_output() on it and then waits until 50% of the socket buffer are
free again to repeat the cycle. This way tcp_output() gets the full amount
of data to work with and can issue up to 64K sends for TSO to chop up in
the network adapter without using any CPU cycles. Thus it gets very efficient
especially with the readahead the VM and I/O system do.
The previous sendfile(2) code simply looped over the file, turned each 4K
page into an mbuf and sent it off. This had the effect that TSO could only
generate 2 packets per send instead of up to 44 at its maximum of 64K.
Add experimental SF_MNOWAIT flag to sendfile(2) to return ENOMEM instead of
sleeping on mbuf allocation failures.
Benchmarking shows significant improvements (95% confidence):
45% less cpu (or 1.81 times better) with new sendfile vs. old sendfile (non-TSO)
83% less cpu (or 5.7 times better) with new sendfile vs. old sendfile (TSO)
(Sender AMD Opteron 852 (2.6GHz) with em(4) PCI-X-133 interface and receiver
DELL Poweredge SC1425 P-IV Xeon 3.2GHz with em(4) LOM connected back to back
at 1000Base-TX full duplex.)
Sponsored by: TCP/IP Optimization Fundraise 2005
MFC after: 3 month
longjmp to the default context. As result, "alltrace" command may
be prematurely terminated (without error message). This is happens,
for instance, when system is low on memory and referenced page in
kernel-mode thread stack is swapped out.
Protect "alltrace" against termination on trap by setting temporary
kdb_jmpbuf context.
Submitted by: Peter Holm
device (kind) specific unit field to the common field. This change
allows a future version of libefi to work without requiring anything
more than what is defined in struct devdesc and as such makes it
possible to compile said version of libefi for different platforms
without requiring that those platforms have identical derivatives
of struct devdesc.
as we have no use for that info. Instead let this function return the
keyboard ID and verify at its invocation in sunkbd_configure() that we're
talking to a Sun type 4/5/6 keyboard, i.e. a keyboard supported by this
driver.
- Add an option SUNKBD_EMULATE_ATKBD whose code is based on the respective
code in ukbd(4) and like UKBD_EMULATE_ATSCANCODE causes this driver to
emit AT keyboard/KB_101 compatible scan codes in K_RAW mode as assumed by
kbdmux(4). Unlike UKBD_EMULATE_ATSCANCODE, SUNKBD_EMULATE_ATKBD also
triggers the use of AT keyboard maps and thus allows to use the map files
in share/syscons/keymaps with this driver at the cost of an additional
translation (in ukbd(4) this just is the way of operation).
- Implement an option SUNKBD_DFLT_KEYMAP, which like the equivalent options
of the other keyboard drivers allows to specify the default in-kernel
keyboard map. For obvious reasons this made to only work when also using
SUNKBD_EMULATE_ATKBD.
- Implement sunkbd_check(), sunkbd_check_char() and sunkbd_clear_state(),
which are also required for interoperability with kbdmux(4).
- Implement K_CODE mode and FreeBSD keypad compose.
- As a minor hack define KBD_DFLT_KEYMAP also in the !SUNKBD_EMULATE_ATKBD
case so we can obtain fkey_tab from <dev/kbd/kbdtables.h> rather than
having to duplicate it and #ifdef some more code.
- Don't use the TX-buffer for writing the two command bytes for setting the
keyboard LEDs as this consequently requires a hardware FIFO that is at
least two bytes in depth, which the NMOS-variant of the Zilog SCCs doesn't
have. Thus use an inlined version of uart_putc() to consecutively write
the command bytes (a cleaner approach would be to do this via the soft
interrupt handler but that variant wouldn't work while in ddb(4)). [1]
- Fix some minor style(9) bugs.
PR: 90316 [1]
Reviewed by: marcel [1]
gmirror and graid3 in a way that it is not resynchronized after a
power failure or system crash.
It is safe when gjournal is running on top of gmirror/graid3.
BIO_READ/BIO_WRITE is sent to vnode-backed provider (BIO_DELETE or
BIO_FLUSH).
Reported by: ceri
Add support for BIO_FLUSH to vnode-backed md(4) devices based on
VOP_FSYNC().
we won't be able to exit from the thread.
Function g_eli_cpu_is_disabled() stoled from kern_pmc.c.
PR: 104669
Reported by: Nikolay Mirin <nik@optim.com.ru>
MFC after: 1 week
- Test the mac_type rather than if_hwassist (since ifp doesn't exist yet)
to determine if the adapter supports TSO and thus to change the sizes
for the bus_dma tag.
Reviewed by: glebius
- Do not modify mnt_flag without mount interlock held.
- Do not touch MNT_ASYNC flag, as this can lead to a race with nmount(2).
Pointed out by: tegge
Reviewed by: tegge
RSTP provides faster spanning tree convergence, the protocol will exchange
information with neighboring switches to quickly transition to forwarding
without creating loops. The code will default to RSTP mode but will downgrade
any port connected to a legacy STP network so is fully backward compatible.
Reviewed by: syrinx
Tested by: syrinx
