passing through. Modifications are restricted to a subset of C language
operations on unsigned integers of 8, 16, 32 or 64 bit size.
These are: set to new value (=), addition (+=), subtraction (-=),
multiplication (*=), division (/=), negation (= -), bitwise AND (&=),
bitwise OR (|=), bitwise eXclusive OR (^=), shift left (<<=),
shift right (>>=). Several operations are all applied to a packet
sequentially in order they were specified by user.
Submitted by: Maxim Ignatenko <gelraen.ua at gmail.com>
Vadim Goncharov <vadimnuclight at tpu.ru>
Discussed with: net@
Approved by: mav (mentor)
MFC after: 1 month
the case of immediate unconfigure after configure. Hold the periph an
extra count while we have the task to create sysctl context outstanding
so that the periph doesn't go away unexpectedly.
Sponsored by: Panasas
Reviewed by: scsi@
MFC after: 1 month
from the buffer pages to buffer. Combine the code to set buffer
dirty range (previously in vfs_setdirty()) and to clean the pages
(vfs_clean_pages()) into new function vfs_clean_pages_dirty_buf(). Now
the vm object lock is acquired only once.
Drain the VPO_BUSY bit of the buffer pages before setting valid
and clean bits in vfs_clean_pages_dirty_buf() with new helper
vfs_drain_busy_pages(). pmap_clear_modify() asserts that page is not
busy.
In vfs_busy_pages(), move the wait for draining of VPO_BUSY before
the dirtyness handling, to follow the structure of
vfs_clean_pages_dirty_buf().
Reported and tested by: pho
Suggested and reviewed by: alc
MFC after: 2 weeks
the interrupt followed by a brief delay if it is not currently masked
before moving the interrupt.
- Move the icu_lock out of ioapic_program_intpin() and into callers. This
closes a race where ioapic_program_intpin() could use a stale value of
the masked state to compute the masked bit in the register.
Reviewed by: mav
MFC after: 2 weeks
better devices. This can be disabled on a per-device basis using quirks as
well.
This also handles the case where there is actually no connected LUN 0
(which can definitely be the case for storage arrays).
Reviewed by: scsi@
MFC after: 1 month
for REPORT and SET TARGET PORT GROUP commands (foundations for future work).
Regularize opcodes to be upper case hex.
Pick *one* of tab or space after #define (tab) and stick with that.
MFC after: 2 weeks
1) Only use both mapping arrays when NR sack is off. This
way we can hold off moving the cumack (not the best but
workable) when NR-sack is on.
2) We must make sure to just return on the move of the
bit to the NR array if the cum-ack as already went
past the TSN. This prevents marking a bit behind the
array and hitting the invariant code that panic's us.
MFC after: 1 week
- Re-enable TSO. This was broken previously due to CSUM_TSO clearing the
CSUM_TCP flag, so our checksum flags were incorrectly set going to the
netback driver. That was fixed in r206844 in tcp_output.c, so we can
turn TSO back on here.
- Fix the way transmit slots are calculated, so that we can't overfill
the ring.
- Avoid sending packets with more fragments/segments than netback can
handle. The Linux netback code can only handle packets of
MAX_SKB_FRAGS, which turns out to be 18 on machines with 4K pages. We
can easily generate packets with 32 or so fragments with TSO turned on.
Right now the solution is just to drop the packets (since netback
doesn't seem to handle it gracefully), but we should come up with a way
to allow a driver to tell the TCP stack the maximum number of fragments
it can handle in a single packet.
- Fix the way the consumer is tracked in the receive path. It could get
out of sync fairly easily.
- Use standard Xen ring macros to make it clearer how netfront is using
the rings.
- Get rid of Linux-ish negative errno return values.
- Added more documentation to the driver.
- Refactored code to make it easier to read.
- Some other minor fixes.
Reviewed by: gibbs
Reviewed by: gibbs
Sponsored by: Spectra Logic
MFC after: 7 days
We were only paying attention to the nr-mapping-array. Which
seems to make sense on the surface, by definition things
up to the cum-ack should be deliverable thus in the nr-mapping-array.
However (there is always a gotcha) thats not true when it
comes to large messages. The stack may hold the message
while re-assembling it not not deliver it based on several
thresholds. If that happens (which it would for smaller
large messages) then the cum-ack is figured wrong. We
now properly use both arrays in the cum-ack calculation.
MFC after: 1 week.
is enabled.
This already worked if without job control.
In either case, this depends on it that a process that terminates due to
SIGINT exits on it (so not with status 1, or worse, 0).
Example:
sleep 5; echo continued
This does not print "continued" any more if sleep is aborted via ctrl+c.
MFC after: 1 month
the timer. This is done by considering the locks
we will destroy and if they are contended we consider
it the same as a reference count being up. Fixing this
appears to cleanup another crash that was appearing with
all the timers where the socket buf lock got corrupted.
2) Fix the sysctl code to take a lot more care when looking
at INP's that are in the GONE or ALLGONE state.
MFC after: 1 week
of apitesters.. Basically we end up with attempting
to destroy a lock thats contended on. A cookie echo
arrives at the same time that the close is happening.
The close gets the lock but the cookie echo has already
passed the check for the gone flag and is then locked
waiting on the create lock.. when we go to destroy it
bam. For now we do the timer destroy for all calls
to close.. We can probably optimize this later so that
we check whats being contended on and if there is contention
then do the timer thing. but this is probably safest since
the inp has been removed from all lists and references and
only the timer can find it.. once the locks are released all
other places will instantly see the GONE flag and bail (thats
what the change in sctp_input is one place that was lacking
the bail code).
MFC after: 1 week
held by checking the create and inp locks as well.
2) Fix a bug in that when a socket is closed an INIT-ACK
is returned, we do NOT unlock the locked_tcb unless its
different (an unlikely scenario). If we blindly unlock as
we were doing before we can end up unlocking the actual
stcb thats about to be sent down to the free function which
requires the lock be held.
MFC after: 1 week
was setup to do an abortive close an association that was
in the accept_queue could get stuck and never freed. Now
we properly start the kill timer on the socket and turn
off the flag (same thing we do for the graceful close method).
MFC after: 1 week
optionally with a header if "-h" is passed. Toast CPU time measurement
in the server for now. Remove -C and -T, since we now always report
both connections/sec and Gb/sec.
MFC after: 1 week
Sponsored by: Juniper Networks
corruption bug where if an ATA command is issued before DMA is started,
data will become available to the controller before it knows what to do
with it. This results in either data corruption or a controller crash.
This patch remedies the problem by adopting the workaround employed
by Linux and Darwin: starting the DMA engine prior to sending the ATA
command.
Observer on: Xserve G5
Reviewed by: mav
MFC after: 1 week
the page is managed.
Don't set the machine-independent layer's dirty field for the page being
mapped in init_pte_prot(). (The dirty field is only supposed to set when
a mapping is removed or write-protected and the page was managed and
modified.)
Determine whether or not to perform dirty bit emulation based on whether
or not the page is managed, i.e., pageable, not based on whether the page
is being mapped into the kernel address space. Nearly all of the kernel
address space consists of unmanaged pages, so this has neglible impact on
the overhead of dirty bit emulation for the kernel address space. However,
there can also exist unmanaged pages in the user address space. Previously,
dirty bit emulation was unnecessarily performed on these pages.
Tested by: jchandra@
