Commit Graph

108 Commits

Author SHA1 Message Date
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Marius Strobl
3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
Marius Strobl
d6c65d276e Converted the remainder of the NIC drivers to use the mii_attach()
introduced in r213878 instead of mii_phy_probe(). Unlike r213893 these
are only straight forward conversions though.

Reviewed by:	yongari
2010-10-15 15:00:30 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Warner Losh
e436c38238 Fix shutdown prototypes. 2009-02-10 23:17:20 +00:00
John Baldwin
3d0f3248ea Use the parent device's DMA tag when creating our own DMA tags. This fixes
a panic on sparc64.

Reviewed by:	Florian Smeets  flo kasimir.com
2008-09-12 14:41:53 +00:00
John Baldwin
d993ea4271 Make tx(4) MPSAFE
- Add a mutex to the softc to protect the softc and device hardware.
- Use a private timer to implement a watchdog for tx timeouts and drive
  the timer for auto negotiation.
- Use bus_foo() rather than bus_space_foo() and remove the bus space
  tag & handle from the softc.
- Call bus_setup_intr() after ether_ifattach().

Tested by:	Florian Smeets  flo of kasimir.com
2008-06-10 17:59:43 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Poul-Henning Kamp
c40da00ca3 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00
Gleb Smirnoff
23033eebf4 Do not touch ifp->if_baudrate in miibus aware drivers. 2006-02-14 12:44:56 +00:00
Robert Watson
291c88bd60 Convert to ANSI C function declarations.
MFC after:	1 week
2006-01-21 20:07:19 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Warner Losh
ad4f426ef6 Make sure that we call if_free(ifp) after bus_teardown_intr. Since we
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash.  Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.
2005-09-19 03:10:21 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Warner Losh
2ece8174c1 Use BUS_PROBE_DEFAULT in preference to 0. Also for vx, return
BUS_PROBE_LOW_PRIORITY in stead of ifdef for devices that xl and vx
both support so that xl will snarf them on up.
2005-03-01 07:50:12 +00:00
Robert Watson
85d5028a78 Since if_tx doesn't contain locking or run with INTR_MPSAFE, mark
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.
2004-08-13 23:52:33 +00:00
Christian Weisgerber
0e939c0cea Replace handrolled CRC calculation with ether_crc32_[lb]e(). 2004-06-09 14:34:04 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Yaroslav Tykhiy
88b404a610 Mark the VLAN_MTU capability as initially enabled since it's
hardcoded to "ON" for these interfaces.
2004-05-23 19:21:48 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Matthew N. Dodd
e3bbbec2ca Announce ethernet MAC addresss in ether_ifattach(). 2004-03-14 07:12:25 +00:00
David E. O'Brien
a55a017f42 Don't use caddr_t in mchash(). Also use C99 spellings over BSD ones.
Requested by:	bde,imp
2003-12-08 07:54:15 +00:00
David E. O'Brien
4dc52c32bf Remove duplicate FBSDID's, move others to their right place. 2003-11-14 17:16:58 +00:00
David E. O'Brien
aa8255025a Try to create some sort of consistency in how the routings to find the
multicast hash are written.  There are still two distinct algorithms used,
and there actually isn't any reason each driver should have its own copy
of this function as they could all share one copy of it (if it grew an
additional argument).
2003-11-13 20:55:53 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
John Baldwin
e27951b29c Use PCIR_BAR(x) instead of PCIR_MAPS.
Glanced over by:	imp, gibbs
Tested by:		i386 LINT
2003-09-02 17:30:40 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Warner Losh
90cf0136c4 Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 07:08:17 +00:00
Maxime Henrion
445e4e83c5 - No need to bzero() the softc structure.
- Use BUS_DMA_ZERO where appropriate.
2003-08-12 14:55:12 +00:00
Scott Long
f6b1c44d1f Mega busdma API commit.
Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma.  At the moment, this is used for the
asynchronous busdma_swi and callback mechanism.  Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg.  dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create().  The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms.  The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by:	tmm, gibbs
2003-07-01 15:52:06 +00:00
Maxime Henrion
a4d0f4d116 Convert the tx(4) driver to use the busdma API.
Special thanks to brueffer for sending me such a card so that
I could do this work.
2003-04-20 18:08:00 +00:00
Maxime Henrion
b9403c495e Better comment, more style(9) fixes. 2003-04-20 17:36:26 +00:00
Maxime Henrion
2ccf1ce757 style(9). 2003-04-20 01:04:04 +00:00
Maxime Henrion
6d63c80290 Make this file closer to style(9) paradigm. 2003-04-19 17:24:07 +00:00
Maxime Henrion
3566dff0d9 - Enable interrupts only at the end of epic_attach() when all the
other initializations succeeded.
- Initialize the TX and RX rings in epic_attach() rather than in
  epic_init() where we're not supposed to fail.  Similarly, free
  the TX and RX rings in epic_detach() rather than in epic_stop().
- Change epic_init() to be a void function now that it can't fail.
  Also change its parameter to a void * so that we have a correct
  prototype for if_init.
- Now that epic_init() has a correct prototype, don't cast the
  function pointer when initializing if_init.
- Fix nearby style bugs.
2003-04-19 13:51:24 +00:00
Maxime Henrion
f78a230c3c - Correct a comment made bogus by my last commit.
- Use __FBSDID.
2003-04-19 00:28:49 +00:00
Maxime Henrion
8a2ec7627f Various cleanups:
- Don't initialize if_output, ether_ifattach() does this for us.
- Use pci_enable_busmaster() instead of using pci_read_config()
  and pci_write_config() directly.
- Don't try to enable I/O, bus_alloc_resource() does this for us.
2003-04-19 00:21:34 +00:00
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
Bosko Milekic
acc769b2ec Nuke EPIC_MGETCLUSTER entirely. Since 1.60 we don't use it anymore and
instead use our optimized m_getcl().

Submitted by: Hiten Pandya <hiten@unixdaemons.com>
MFC After: 1 week
2003-02-21 23:12:32 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
David E. O'Brien
2d3ce7133a Remove miidevs.h and generate it from miidevs at compile time.
The devlist2h.awk tool to do this has been repocopied to sys/tools/.
2003-01-19 02:59:34 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Sam Leffler
57b6353534 o m_adj rx buffer so IP header is 32-bit aligned
o replace EPIC_MGETCLUSER with m_getcl

MFC after:	1 week
2002-10-25 22:06:03 +00:00
Semen Ustimenko
52d0ed1d0d Remove the OpenBSD comatibility stuff. Many changes to be more style(9)
compilant. Split two pieces if code into separate functions to do not
exceed line length due to indentation.
2002-10-22 00:57:51 +00:00
Semen Ustimenko
c5844e091c Stop trying to align malloc()ed memory. Rely on malloc() instead, just like
others.
2002-08-19 20:36:08 +00:00
Semen Ustimenko
714087a2ac Do not reset card in epic_freebsd_attach() as reset is done in
epic_common_attach().
2002-08-19 20:24:13 +00:00