Commit Graph

42 Commits

Author SHA1 Message Date
Kevin Lo
5bbe0c5357 ether_ifattach() sets if_mtu to ETHERMTU, don't bother set it again
Reviewed by:	yongari
2012-01-07 09:41:57 +00:00
Maxim Sobolev
e50d35e6c6 Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after:	1 month
2010-05-03 07:32:50 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Andriy Gapon
c0e55e3b65 strict kobj sigs: fix assortment of device_detach and device_shutdown impls
with common issue of having void return type instead of int

Reviewed by:	imp, current@
Approved by:	jhb (mentor)
2009-06-11 17:14:28 +00:00
Warner Losh
95469daac8 Convert to new style PC Card front end driver. Add support for the
NEC PC-9801N-J02 and PC-9801N-J02R.  I can't test the former because
it requires resources that conflict with my laptop.  I can't test the
latter because my dog chewed up my -J02R card and it didn't survive
well enough for me to test.
2008-08-07 20:55:20 +00:00
John Baldwin
9f9b77e713 Add locking to snc(4) so it is MPSAFE:
- Add a mutex to the softc to protect the softc and device hardware.
- Use a private timer routine to drive the transmit watchdog timer instead
  of using if_watchdog/if_timer.
- If if_alloc() fails during attach, fail the attach with an error rather
  than panic'ing.
- Clear RUNNING and OACTIVE only in sncstop().
- Don't mess with IFF_UP.
- Don't leak 'struct ifnet' on detach.
- Setup interrupt handler after ether_ifattach().
- Call ether_ifdetach() rather than if_detach() in the pccard detach
  routine.

Tested by:	no one despite repeated requests
2008-08-04 19:19:18 +00:00
John Baldwin
8b461b2ba1 Remove various and sundry NetBSDism's in preparation for adding locking. 2008-05-30 21:48:05 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Ruslan Ermilov
44e09d2fa2 Fix -Wundef warnings from compiling GENERIC and LINT kernels of
all architectures.
2005-12-06 11:19:37 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Warner Losh
c82f53f61d 'PC Card' instead of other variants 2005-09-22 06:01:44 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Brooks Davis
2ac7ea9add Build on pc98. 2005-06-12 16:21:44 +00:00
Scott Long
76b85e0fe6 change 'dev' to 'sc->sc_dev' to fix the build.
Approved: re (implicit)
2005-06-12 15:25:19 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Max Laier
473156220d Only send packet to bpf if we are committed to send it. Previously it was
possible that the same packet would show up multiple times.  This poses some
constraints on the TBD locking for snc(4) (see comment).

Obtained from:	DragonFlyBSD
Submitted by:	Joerg Sonnenberger
Reviewed by:	rwatson
2005-02-21 17:30:10 +00:00
Warner Losh
40cc58261a Remove now-stale comment 2005-01-20 20:32:56 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Robert Watson
5ce832e127 Since if_snc doesn't contain locking or run with INTR_MPSAFE, mark
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.
2004-08-13 23:47:01 +00:00
Maxime Henrion
866a788cc2 We don't need to initialize if_output, ether_ifattach() does it
for us.
2004-05-23 16:11:53 +00:00
Warner Losh
fbfb97942e It turns out that the module dependency on pccard is in error. Since
there's not dependencies on pccard symboles, such a dependency is not
necessary.  This means that drivers that have multiple attachments can
not drag bogus devices into the kernel at load time.

We can't (yet) do this with pci and isa.  Drivers written for them
actually do seem to have symbols that depend on these busses'
implementation code.

ndis not touched until other things can be tested.
2004-05-08 06:04:06 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Matthew N. Dodd
e3bbbec2ca Announce ethernet MAC addresss in ether_ifattach(). 2004-03-14 07:12:25 +00:00
Brooks Davis
389748c1e8 Do if_xname conversion. I missed this one because it's pc98 only. 2003-11-01 23:24:38 +00:00
David E. O'Brien
945ff31afa Use __FBSDID().
Also some minor style cleanups.
2003-08-24 18:03:45 +00:00
John Baldwin
8b149b5131 Consistently use the BSD u_int and u_short instead of the SYSV uint and
ushort.  In most of these files, there was a mixture of both styles and
this change just makes them self-consistent.

Requested by:	bde (kern_ktrace.c)
2003-08-07 15:04:27 +00:00
Maxim Konovalov
b0af6a7be5 Remove unused #ifdef BRIDGE.
Reviewed by:	nyan
2003-06-02 08:36:18 +00:00
Yoshihiro Takahashi
0e7902c6cd Fix off-by-one bug.
Submitted by:	chi@bd.mbn.or.jp (Chiharu Shibata)
2003-05-03 01:47:38 +00:00
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
Dag-Erling Smørgrav
fe58453891 Introduce an M_ASSERTPKTHDR() macro which performs the very common task
of asserting that an mbuf has a packet header.  Use it instead of hand-
rolled versions wherever applicable.

Submitted by:	Hiten Pandya <hiten@unixdaemons.com>
2003-04-08 14:25:47 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Yoshihiro Takahashi
46c71b8146 Use correct spl mask.
Submitted by:	chi@bd.mbn.or.jp (Chiharu Shibata)
MFC after:	1 day
2003-02-10 13:31:49 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Poul-Henning Kamp
6817526d14 Convert if_multiaddrs from LIST to TAILQ so that it can be traversed
backwards in the three drivers which want to do that.

Reviewed by:    mikeh
2001-02-06 10:12:15 +00:00
Poul-Henning Kamp
78d82c8c59 Use LIST_FOREACH() to traverse ifp->if_multiaddrs list, instead of
<sys/queue.h> implementation details.

Created with:   /usr/sbin/sed
Reviewed with:  /sbin/md5
2001-02-03 16:29:10 +00:00
Poul-Henning Kamp
9005f14a3b Remove unused #includes.
Approved by:	nyan
2000-10-31 08:22:26 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Yoshihiro Takahashi
10d5f4e72e Don't use bus_get_resource() and bus_get_resource_start() functions if
bus_alloc_resource() failed. So, error messages are changed more simply.

Suggested by:	"Matthew N. Dodd" <winter@jurai.net>
2000-10-03 11:47:34 +00:00
Yoshihiro Takahashi
0a917604f0 Added NEC PC-9801-83, 84, PC-9801-103, 104, PC-9801N-25 and PC-9801N-J02R
support which use National Semiconductor DP8393X (SONIC) as ethernet
controller. Currently, this driver is used on only PC-98.

Submitted by:	Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
Obtained from:	NetBSD/pc98
2000-10-02 14:27:20 +00:00