- Re-write tcp_ctlinput6() to closely mimic the IPv4 tcp_ctlinput()
- Now that tcp_ctlinput6() updates t_maxseg, we can allow ip6_output()
to send TCP packets without looking at the tcp host cache for every
single transmit.
- Make the icmp6 code mimic the IPv4 code & avoid returning
PRC_HOSTDEAD because it is so expensive.
Without these changes in place, every TCP6 pmtu discovery or host
unreachable ICMP resulted in a call to in6_pcbnotify() which walks the
tcbinfo table with the write lock held. Because the tcbinfo table is
shared between IPv4 and IPv6, this causes huge scalabilty issues on
servers with lots of (~100K) TCP connections, to the point where even
a small percent of IPv6 traffic had a disproportionate impact on
overall throughput.
Reviewed by: bz, rrs, ae (all earlier versions), lstewart (in Netflix's tree)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D7272
Relying on the boot loader console configuration allows us to use a
common set of device hints for all SENTRY5 devices.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7376
allow us to add an ACPI attachment for arm64.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7307
so when user did `ipfw table N flush` it always worked, but now
when table N doesn't exist the kernel returns ESRCH error.
This isn't fatal error for flush and destroy commands. Do not
call err(3) when errno is equal to ESRCH. Also warn only when
quiet mode isn't enabled. This fixes a regression in behavior,
when old rules are loaded from file.
Also use correct value for switch in the table_swap().
Reported by: Kevin Oberman
MFC after: 3 days
between ACPI and FDT. This will be needed on machines with both, e.g. the
SoftIron Overdrive 3000. The kernel will accept one or more comma separated
values of either 'acpi' or 'fdt'. Any other values are skipped.
To set it the user can either set it on the loader command line, or
in loader.conf e.g. in loader.conf:
kern.cfg.order=acpi,fdt
This will try using ACPI then FDT. If none of the selected options work the
kernel tries to use one to get the serial console, then panics.
Reviewed by: emaste (earlier version)
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7274
lot of this module and I want to get the style and whitespace changes in
a separate commit (or maybe more).
PR: 206185
Submitted by: Dmitry Vagin
MFC after: 1 month
Just make sure that the total channel packet size does not exceed 1/2
data size of the TX bufring.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7359
clang-analyzer complained that eqin() sets file-scoped pointer param_start
to point into char buffer defined in scan_profile(), and once
scan_profile() exits, param_start is a "dangling reference". param_start
was never used afterwards, but it's cleaner to move it to set_option()
which is the only branch where param_start is needed.
Reference:
ab0e44e5da
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak
It's pr_comment.c that should decide whether to put a "star comment
continuation" or not. This duplicates code a bit, but it simplifies
pr_comment() at the same time since pr_comment() no longer has to "signal"
whether a star continuation is needed or not.
This change requires indent(1) to not wrap comment lines that lack a blank
character, but I think it's for the better if you look at cases when that
happens (mostly long URIs and file system paths, which arguably shouldn't
be wrapped).
It also fixes two bugs:
1. Cases where asterisk is a part of the comment's content (like in "*we*
are the champions") and happens to appear at the beginning of the line,
misleading dump_line() into thinking that this is part of the star comment
continuation, leading to misalignment.
2. Cases where blank starred lines had three too many characters on the
line when wrapped.
Reference:
3b41ee78aa
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak
After a blank line was printed (to separate paragraphs in comments), the
next line was sometimes wrapped to the column at which the previous
non-empty line ended. The fix is to reset the last blank pointer (last_bl)
on newline.
References:
345663c07a
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak
Modify count_spaces() to take a third parameter "end" that will make the
function return when the end is reached. This lets the caller pass a
pointer to non nul-terminated sequence of characters. Rename
count_spaces() to count_spaces_until() and reinstate count_spaces(), this
time based on count_spaces_until().
Use count_spaces_until() to recalculate current column when going through
a comment just before the fragment which decides if current line of the
comment should be wrapped. This move simplifies this code by eliminating
the need for keeping the column counter up to date every time e_com is
advanced and also reduces spread of code that has to know how many columns
a tab will produce.
Deduplicate code that decided if a comment needs a blank line at the top.
References:
d9fa3b481527185b4b33
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak
After r303062, which brought openresolv 3.8.1, we need to replace an
additional @RESTARTCMD@ in resolvconf.
Apply a read fix this time.
Submitted by: Guy Yur
X-MFC with: r303062
The original indent(1) described unix-style comments as similar to box
comments, except the first non-blank character on each line is lined up
with the '*' of the "/*" which appears on a line by itself.
The code has been turned off for ages and -sc/-nsc make it even
less relevant.
Reference:
89c5fe2c56
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak
inner-shareable memory accesses. There is no need for full system barriers.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Both variables are uint64_t, but they only count spins or sleeps.
All reasonable values which we can get here comfortably hit in 32-bit range.
Suggested by: kib
MFC after: 1 week
The current implementation uses non-temporal writes. This turns out to
be detrimental to performance if the page is used shortly after, which
is the typical case with page faults.
Switch to rep stos.
Reviewed by: kib
MFC after: 1 week
Just like with freelocale(3), I haven't been able to find any piece of
code that actually makes use of this function's return value, both in
base and in ports. The reason for this is that FreeBSD seems to be the
only operating system to have such a prototype. This is why I'm deciding
to not use symbol versioning for this.
It does seem that the pw(8) utility depends on the function's typing and
already had a switch in place to toggle between the FreeBSD and POSIX
variant of this function. Clean this up by always expecting the POSIX
variant.
There is also a single port that has a couple of local declarations of
setgrent(3) that need to be patched up. This is in the process of being
fixed.
PR: 211394 (exp-run)
For reasons I won't comment on, the AR934x and QCA953x GPIO_OE register
value is inverted - bit set == input, bit clear == output.
So, fix this in the output setting, in reading the initial state from
the boot loader, and also setting any gpiofunc pins that are necessary.
No, this isn't a star trek science joke - sometimes LEDs are wired
up to be active low, so this is needed.
Submitted by: Dan Nelson <dnelson_1901@yahoo.com>
This resolves a -Wformat issue when the value is used as a format width
precision specifier, i.e. %*s
MFC after: 1 month
Reported by: clang
Sponsored by: EMC / Isilon Storage Division
'\n' was specifically added to -e arguments prior to r303047. Restore
historical behavior which in turn fixes usr.sbin/etcupdate/preworld_test:main .
The fix is being committed to address the issue in the short term and may be
iterated upon as noted in bug 211399
Discussed with: mi, pfg
Differential Revision: https://reviews.freebsd.org/D7368
PR: 195929, 211399 [*]
MFC after: 18 days
X-MFC with: r303047
Reported by: Jenkins
Sponsored by: EMC / Isilon Storage Division
Also increase the stack size still keeping a conservative value of 256.
This is based on a similar changes done for PostgreSQL which instead
uses a stack size of 1000.
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak (with changes)
This fixes a very visible issue that may be hidden by some indent.pro
settings as in the example from FreeBSD's /usr/share.
From Piotr's log:
____
To prevent losing tabs from indentation in declarations, FreeBSD indent's
r125624 added code for the most common case when it's an identifier that
is indented, but didn't do anything with the original code that did the
same for any other cases. The other cases are: lparens (function pointer
declaration), asterisks (pointer declaration), stray semicolons, and
commas leading identifiers instead of trailing them.
Use the code added in r125624 (and improved in later commits) to write a
new function indent_declaration() and use it in all places that meant to
indent declarations. In order to indent only once per line, reuse existing
ps.dumped_decl_indent variable that was only used when formatting for
troff (-troff) until now.
____
Reference:
ddd263db2a
Differential Revision: https://reviews.freebsd.org/D6966 (Partial)
Submitted by: Piotr Stefaniak
to 0. Breaking this rule in 2001 NetBSD hack was imported which attempts
to workaround very limited glob() return codes amount. Use POSIX-compatible
workaround now with E2BIG which can't comes from other functions used
instead of prohibited 0.
