queued internally. This works around issue in the isci HAL where it cannot
accept new I/O to a device after a resetting->ready state transition until
the completion context has unwound.
This issue was found by submitting non-tagged CCBs through pass(4) interface
to a SATA disk with an extremely small timeout value (5ms). This would trigger
internal resets with I/O in the isci(4) internal queues.
The small timeout value had not been intentional (and original reporter has
since changed his test to use 5sec instead), but it did uncover this corner
case that would result in a hung disk.
Sponsored by: Intel
Reported and tested by: Ravi Pokala <rpokala at panasas dot com>
Reviewed by: scottl (earlier version)
MFC after: 1 week
Eliminate bpf_buffer_alloc() and allocate BPF buffers on descriptor creation and BIOCSBLEN ioctl.
This permits us not to allocate buffers inside bpf_attachd() which is protected by global lock.
Approved by: kib(mentor)
MFC in: 4 weeks
'flags' field is added to the end of bpf_if structure. Currently the only
flag is BPFIF_FLAG_DYING which is set on bpf detach and checked by bpf_attachd()
Problem can be easily triggered on SMP stable/[89] by the following command (sort of):
'while true; do ifconfig vlan222 create vlan 222 vlandev em0 up ; tcpdump -pi vlan222 & ; ifconfig vlan222 destroy ; done'
Fix possible use-after-free when BPF detaches itself from interface, freeing bpf_bif memory,
while interface is still UP and there can be routes via this interface.
Freeing is now delayed till ifnet_departure_event is received via eventhandler(9) api.
Convert bpfd rwlock back to mutex due lack of performance gain (currently checking if packet
matches filter is done without holding bpfd lock and we have to acquire write lock if packet matches)
Approved by: kib(mentor)
MFC in: 4 weeks
Fix panic on tcpdump being attached to interface being removed (introduced by r233937, pointed by hrs@ and adrian@)
Protect most of bpf_setf() by BPF global lock
Add several forgotten assertions (thanks to adrian@)
Document current locking model inside bpf.c
Document EVENTHANDLER(9) usage inside BPF.
Approved by: kib(mentor)
Tested by: gnn
MFC in: 4 weeks
avoid creating bad entries in the grp list as a result of memory allocation
failures while building new entries.
PR: bin/83340
Reviewed by: delphij (prior version of patch)
bison, keeping full compatibility with our previous yacc implementation.
Also bring the ability to create reentrant parser
This fix bin/140309 [1]
PR: bin/140309 [1]
Submitted by: Philippe Pepiot <ksh@philpep.org> [1]
Approved by: des (mentor)
MFC after: 1 month
frequency in the at91_pmc_clock_init rather than passing it in. Allow
for frequencies >= 21MHz by rounding to the nearest 500Hz (Idea from
Ian Lapore whose company uses a similar arrangement in their product).
at91_pmc_clock_init() is now nearly independent of the rest of the pmc
driver (which means we may be able to call it much earlier in boot
soon to eliminate the master clock config file requirement for printf
to work during early boot and also eliminate some interdependencies
with the device ordering which requires pmc to be the first device
added).
to this pmap.c. This new r/w lock is used primarily to synchronize access
to the PV lists. However, it will be used in a somewhat unconventional
way. As finer-grained PV list locking is added to each of the pmap
functions that acquire this r/w lock, its acquisition will be changed from
write to read, enabling concurrent execution of the pmap functions with
finer-grained locking.
Reviewed by: kib
X-MFC after: r235598
The generic ELF loading code maps the kernel into low memory
by subtracting KERN_BASE. So the copyin/copyout/readin functions
are always called with low addresses. This code finds the largest
DRAM block from the U-Boot memory map and adds that base to
the addresses.
In particular, this fixes ubldr on AM3358, which has DRAM
mapped to 0x80000000 at power-on.
disabled or the system is in shutdown procedure.
This should fix the problem which kernel never response to the sleep
button press events after the message `suspend request ignored (not
ready yet)'.
MFC after: 3 days
range operations like pmap_remove() and pmap_protect() as well as allowing
simple operations like pmap_extract() not to involve any global state.
This substantially reduces lock coverages for the global table lock and
improves concurrency.
casted to structs by getting rid of these buffers entirely. In r169832, it
was tried to paper over this issue by 32-bit aligning the buffers. Depending
on compiler optimizations that still was insufficient for 64-bit architectures
with strong alignment requirements though.
While at it, add comments regarding the total lack of locking in this area.
Tested by: bz
Reviewed by: bz (slightly earlier version), yongari (earlier version)
MFC after: 1 week
There's some TX path TDMA code in if_ath_tx.c which should be migrated
out, but first I should likely try and verify/fix/repair the TDMA support
in 9.x and -HEAD.
* migrate the rx processing out into if_ath_rx.c
* migrate the TSF functions into if_ath_tsf.h, as inlines
This is in prepration for supporting the EDMA RX routines, required to
support the AR93xx series NICs.
TODO:
* ath_start() shouldn't be private, but it's called as part of
the RX path. I should likely migrate ath_rx_tasklet() back into
if_ath.c and then return this to be 'static'. The RX code really
shouldn't need to see TX routines (and vice versa.)
* ath_beacon_* should be in if_ath_beacon.[ch].
* ath_tdma_* should be in if_ath_tdma.[ch] ...
Allow tso4 and tso6 be set individually given we have the bits.
This will help with drivers not working as expected during the
transition time and later.
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
Reviewed by: gnn
MFC After: 1 week
The configuration is:
* RGMII, both ports
* arge0 - connected to PHY4 as a dedicated port (CPU port)
* arge1 - connected to the switch ports
I've verified this on my routerstation pro board.
