Commit Graph

7905 Commits

Author SHA1 Message Date
Edward Tomasz Napierala
d5b0fb47eb Add 'p' postfix to mdconfig(8).
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-10-10 09:37:31 +00:00
Edward Tomasz Napierala
45d7de1d37 Make geom_nop(4) collect statistics on all types of BIOs, not just
reads and writes.

PR:		kern/198405
Submitted by:	Matthew D. Fuller <fullermd at over-yonder dot net>
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D3679
2015-10-10 09:03:31 +00:00
Baptiste Daroussin
e1619d123e Only print the errno string in case sysctl(3) does not file with ENOENT
This reduces the noise in error reporing from sysctl(8):

Before:
$ sysctl bla=something
sysctl: unknown oid 'bla': No such file or directory

After:
$ sysctl bla=something
sysctl: unknown oid 'bla'

MFC after:	1 week
Sponsored by:	Gandi.net
2015-10-07 09:28:54 +00:00
Baptiste Daroussin
ca587fdaac Trim spaces at the end of the buffer before trying to convert it to an oid
This allows to write entries in sysctl.conf with spaces before the '=' like
kern.ipc.shmmax = 9663676416

MFC after:	1 week
Sponsored by:	Gandi.net
2015-10-07 08:56:01 +00:00
Xin LI
56160b2e67 Now that we own the code, use arc4random(3) unconditionally
and remove the corresponding HAVE_ARC4RANDOM conditions.

MFC after:	2 weeks
2015-10-06 23:42:58 +00:00
Andrey V. Elsukov
56afe65ca9 Fix possible segmentation fault.
PR:		203494
MFC after:	1 week
2015-10-03 03:12:57 +00:00
Bryan Drewery
10b83bb0e9 META_MODE: For some reason meta mode cannot generate the intermediate tab.c
files.  Split up all of the targets to be more clear on how they are generated
to fix the problem.

MFC after:	2 weeks
Sponsored by:	EMC / Isilon Storage Division
2015-10-02 07:00:43 +00:00
Colin Percival
2eb0015ab7 Disable suspend when we're shutting down. This solves the "tell FreeBSD
to shut down; close laptop lid" scenario which otherwise tended to end
with a laptop overheating or the battery dying.

The implementation uses a new sysctl, kern.suspend_blocked; init(8) sets
this while rc.suspend runs, and the ACPI sleep code ignores requests while
the sysctl is set.

Discussed on:	freebsd-acpi (35 emails)
MFC after:	1 week
2015-10-01 10:52:26 +00:00
Enji Cooper
abd7105060 Replace N #defines with nitems to simplify ifconfig code slightly
MFC after: 1 week
2015-09-27 07:51:18 +00:00
Bryan Drewery
6a8077f3d5 Add SUBDIR_PARALLEL.
MFC after:	2 weeks
Sponsored by:	EMC / Isilon Storage Division
2015-09-26 01:28:50 +00:00
Bryan Drewery
a98533d3e8 Remove disconnected directories.
These were added disconnected in 2005 in r145524.

Sponsored by:	EMC / Isilon Storage Division
2015-09-26 01:24:35 +00:00
Bryan Drewery
ec766071e3 META_MODE: Remove DEP_MACHINE from Makefile.depend files.
This has not been needed since r246865 in projects/bmake.

Sponsored by:	EMC / Isilon Storage Division
2015-09-25 19:44:01 +00:00
Bryan Drewery
54c7d75a06 META_MODE: Remove DEP_RELDIR from Makefile.depend files.
This has not been needed since r284171 in projects/bmake.

Sponsored by:	EMC / Isilon Storage Division
2015-09-25 19:26:08 +00:00
Poul-Henning Kamp
ef02f85c38 Fix two cases where "const" were washed off pointers with strchr(3) 2015-09-25 07:37:00 +00:00
Ryan Stone
60d978a75b Fix /sbin/route to never look up (invalid) interface names through DNS
/sbin/route has a bug where if it is passed an interface name that does
not exist, it falls through and winds up interpreting it as a hostname.
It fails out eventually, but on a system where DNS lookup is broken you
can end up waiting for up to 60 seconds waiting for the DNS lookup to
timeout.  I'm not quite sure what happens if the DNS lookup somehow
succeeds but I doubt that can end well.

Reviewed by:	markj, cem
MFC after:	2 weeks
Sponsored by:	EMC/Isilon Storage Division
2015-09-17 16:56:49 +00:00
Bryan Drewery
42c4cf86d4 Update META_MODE dependencies. 2015-09-17 05:06:34 +00:00
Allan Jude
cc59771c4a Make ifconfig always exit with an error code if an important ioctl fails
PR:		203062
Arm Twisting by:	Kristof Provost
Reviewed by:	kp
Approved by:	bapt (mentor)
MFC after:	2 weeks
Relnotes:	yes
Sponsored by:	ScaleEngine Inc.
Sponsored by:	vBSDCon
Differential Revision:	https://reviews.freebsd.org/D3644
2015-09-16 03:03:19 +00:00
Edward Tomasz Napierala
bb27d7ed90 Add a way to specify stripesize and stripeoffset to gnop(8). This makes
it possible to "simulate" 4K media, to eg test alignment handling.

Reviewed by:	mav@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D3664
2015-09-15 18:01:59 +00:00
Hiroki Sato
f74237f5b6 - Remove #ifdef HAVE_POLL_H.
- Use nitems().

MFC after:	3 days
2015-09-10 06:40:28 +00:00
Hiroki Sato
b1c250ff3f - Remove GIF_{SEND,ACCEPT}_REVETHIP.
- Simplify EADDRNOTAVAIL and EAFNOSUPPORT conditions.

MFC after:	3 days
2015-09-10 05:59:39 +00:00
Edward Tomasz Napierala
2f221c70f9 The dumpfs(8) utility doesn't actually use disktab(5); remove it
from "SEE ALSO".

MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-09-03 11:40:47 +00:00
Edward Tomasz Napierala
74ecd2c0da Fix markup.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-09-02 14:10:09 +00:00
Edward Tomasz Napierala
b8c19fd719 It's 2015, and some people are still trying to use fdisk and then
go asking what debug flags to set for GEOM to make it work.  Advice
them to use gpart(8) instead.

Something similar should probably done with disklabel,
but I need to rewrite the disklabel examples first.

Reviewed by:	wblock@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D3315
2015-09-02 14:08:43 +00:00
Kristof Provost
64b3b4d611 pf: Remove support for 'scrub fragment crop|drop-ovl'
The crop/drop-ovl fragment scrub modes are not very useful and likely to confuse
users into making poor choices.
It's also a fairly large amount of complex code, so just remove the support
altogether.

Users who have 'scrub fragment crop|drop-ovl' in their pf configuration will be
implicitly converted to 'scrub fragment reassemble'.

Reviewed by:	gnn, eri
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D3466
2015-08-27 21:27:47 +00:00
Marcelo Araujo
9ae278b077 Code cleanup unused-but-set-variable spotted by gcc.
Approved by:	bapt (mentor)
Differential Revision:	D3475
2015-08-25 15:33:09 +00:00
Marcelo Araujo
b7684f4b85 Code cleanup unused-but-set-variable spotted by gcc.
Reviewed by:	melifaro
Approved by:	bapt (mentor)
Differential Revision:	D3473
2015-08-25 15:32:08 +00:00
Marcel Moolenaar
d1a0d267b7 Upgrade libxo to 0.4.5.
Local changes incorporated by 0.4.5: r284340
Local changes retained: r276260, r282117

Obtained from:	https://github.com/Juniper/libxo
2015-08-24 16:26:20 +00:00
Luiz Otavio O Souza
0a70aaf8f5 Add ALTQ(9) support for the CoDel algorithm.
CoDel is a parameterless queue discipline that handles variable bandwidth
and RTT.

It can be used as the single queue discipline on an interface or as a sub
discipline of existing queue disciplines such as PRIQ, CBQ, HFSC, FAIRQ.

Differential Revision:	https://reviews.freebsd.org/D3272
Reviewd by:	rpaulo, gnn (previous version)
Obtained from:	pfSense
Sponsored by:	Rubicon Communications (Netgate)
2015-08-21 22:02:22 +00:00
Kenneth D. Merry
0e358df062 Revamp camcontrol(8) fwdownload support and add the opcodes subcommand.
The significant changes and bugs fixed here are:

1. Fixed a bug in the progress display code:

   When the user's filename is too big, or his terminal width is too
   small, the progress code could wind up using a negative number for
   the length of the "stars" that it uses to indicate progress.

   This negative value was assigned to an unsigned variable, resulting
   in a very large positive value.

   The result is that we wound up writing garbage from memory to the
   user's terminal.

   With an 80 column terminal, a file name length of more than 35
   characters would generate this problem.

   To address this, we now set a minimum progress bar length, and
   truncate the user's file name as needed.

   This has been tested with large filenames and small terminals, and
   at least produces reasonable results.  If the terminal is too
   narrow, the progress display takes up an additional line with each
   update, but this is more user friendly than writing garbage to the
   tty.

2. SATA drives connected via a SATA controller didn't have SCSI Inquiry
   data populated in struct cam_device.  This meant that the code in
   fw_get_vendor() in fwdownload.c would try to match a zero-length
   vendor ID, and so return the first entry in the vendor table.  (Which
   used to be HITACHI.)  Fixed by grabbing identify data, passing the
   identify buffer into fw_get_vendor(), and matching against the model
   name.

3. SATA drives connected via a SAS controller do have Inquiry data
   populated.  The table included a couple of entries -- "ATA ST" and
   "ATA HDS", intended to handle Seagate and Hitachi SATA drives attached
   via a SAS controller.  SCSI to ATA translation layers use a vendor
   ID of "ATA" (which is standard), and then the model name from the ATA
   identify data as the SCSI product name when they are returning data on
   SATA disks.  The cam_strmatch code will match the first part of the
   string (because the length it is given is the length of the vendor,
   "ATA"), and return 0 (i.e. a match).  So all SATA drives attached to
   a SAS controller would be programmed using the Seagate method
   (WRITE BUFFER mode 7) of SCSI firmware downloading.

4. Issue #2 above covered up a bug in fw_download_img() -- if the
   maximum packet size in the vendor table was 0, it tried to default
   to a packet size of 32K.  But then it didn't actually succeed in
   doing that, because it set the packet size to the value that was
   in the vendor table (0).  Now that we actually have ATA attached
   drives fall use the VENDOR_ATA case, we need a reasonable default
   packet size.  So this is fixed to properly set the default packet size.

5. Add support for downloading firmware to IBM LTO drives, and add a
   firmware file validation method to make sure that the firmware
   file matches the drive type.  IBM tape drives include a Load ID and
   RU name in their vendor-specific VPD page 0x3.  Those should match
   the IDs in the header of the firmware file to insure that the
   proper firmware file is loaded.

6. This also adds a new -q option to the camcontrol fwdownload
   subcommand to suppress informational output.  When -q is used in
   combination with -y, the firmware upgrade will happen without
   prompting and without output except if an error condition occurs.

7. Re-add support for printing out SCSI inquiry information when
   asking the user to confirm that they want to download firmware, and
   add printing of ATA Identify data if it is a SATA disk.  This was
   removed in r237281 when support for flashing ATA disks was added.

8. Add a new camcontrol(8) "opcodes" subcommand, and use the
   underlying code to get recommended timeout values for drive
   firmware downloads.

   Many SCSI devices support the REPORT SUPPORTED OPERATION CODES
   command, and some support the optional timeout descriptor that
   specifies nominal and recommended timeouts for the commands
   supported by the device.

   The new camcontrol opcodes subcommand allows displaying all
   opcodes supported by a drive, information about which fields
   in a SCSI CDB are actually used by a given SCSI device, and the
   nominal and recommended timeout values for each command.

   Since firmware downloads can take a long time in some devices, and
   the time varies greatly between different types of devices, take
   advantage of the infrastructure used by the camcontrol opcodes
   subcommand to determine the best timeout to use for the WRITE
   BUFFER command in SCSI device firmware downloads.

   If the device recommends a timeout, it is likely to be more
   accurate than the default 50 second timeout used by the firmware
   download code.  If the user specifies a timeout, it will override
   the default or device recommended timeout.  If the device doesn't
   support timeout descriptors, we fall back to the default.

9. Instead of downloading firmware to SATA drives behind a SAS controller
   using WRITE BUFFER, use the SCSI ATA PASS-THROUGH command to compose
   an ATA DOWNLOAD MICROCODE command and it to the drive.  The previous
   version of this code attempted to send a SCSI WRITE BUFFER command to
   SATA drives behind a SAS controller.  Although that is part of the
   SAT-3 spec, it doesn't work with the parameters used with LSI
   controllers at least.

10.Add a new mechanism for making common ATA passthrough and
   ATA-behind-SCSI passthrough commands.

   The existing camcontrol(8) ATA command mechanism checks the device
   type on every command executed.  That works fine for individual
   commands, but is cumbersome for things like a firmware download
   that send a number of commands.

   The fwdownload code detects the device type up front, and then
   sends the appropriate commands.

11.In simulation mode (-s), if the user specifies the -v flag, print out
   the SCSI CDB or ATA registers that would be sent to the drive.  This will
   aid in debugging any firmware download issues.

sbin/camcontrol/fwdownload.c:
	Add a device type to the fw_vendor structure, so that we can
	specify different download methods for different devices from the
	same vendor.  In this case, IBM hard drives (from when they
	still made hard drives) and tape drives.

	Add a tur_status field to the fw_vendor structure so that we can
	specify whether the drive to be upgraded should be ready, not
	ready, or whether it doesn't matter.  Add the corresponding
	capability in fw_download_img().

	Add comments describing each of the vendor table fields.

	Add HGST and SmrtStor to the supported SCSI vendors list.

	In fw_get_vendor(), look at ATA identify data if we have a SATA
	device to try to identify what the drive vendor is.

	Add IBM firmware file validation.  This gets VPD page 0x3, and
	compares the Load ID and RU name in the page to the values
	included in the header.  The validation code will refuse to load
	a firmware file if the values don't match.  This does allow the
	user to attempt a downgrade; whether or not it succeeds will
	likely depend on the drive settings.

	Add a -q option, and disable all informative output
	(progress bars, etc.) when this is enabled.

	Re-add the inquiry in the confirmation dialog so the user has
	a better idea of which device he is talking to.  Add support for
	displaying ATA identify data.

	Don't automatically disable confirmation in simulation (-s) mode.
	This allows the user to see the inquiry or identify data in the
	dialog, and see exactly what they would see when the command
	actually runs.  Also, in simulation mode, if the user specifies
	the -v flag, print out the SCSI CDB or ATA registers that would
	be sent to the drive.  This will aid in debugging any firmware
	download issues.

	Add a timeout field and timeout type to the firmware download
	vendor table.  This allows specifying a default timeout and allows
	specifying whether we should attempt to probe for a recommended
	timeout from the drive.

	Add a new fuction, fw_get_timeout(), that will determine
	which timeout to use for the WRITE BUFFER command.  If the
	user specifies a timeout, we always use that.  Otherwise,
	we will use the drive recommended timeout, if available,
	and fall back to the default when a drive recommended
	timeout isn't available.

	When we prompt the user, tell him what timeout we're going
	to use, and the source of the timeout.

	Revamp the way SATA devices are handled.

	In fwdownload(), use the new get_device_type() function to
	determine what kind of device we're talking to.

	Allow firmware downloads to any SATA device, but restrict
	SCSI downloads to known devices.  (The latter is not a
	change in behavior.)

	Break out the "ready" check from fw_download_img() into a
	new subfunction, fw_check_device_ready().  This sends the
	appropriate command to the device in question -- a TEST
	UNIT READY or an IDENTIFY.  The IDENTIFY for SATA devices
 	a SAT layer is done using the SCSI ATA PASS-THROUGH
	command.

	Use the new build_ata_cmd() function to build either a SCSI or
	ATA I/O CCB to issue the DOWNLOAD MICROCODE command to SATA
	devices.  build_ata_cmd() figures looks at the devtype argument
	and fills in the correct CCB type and CDB or ATA registers.

	Revamp the vendor table to remove the previous
	vendor-specific ATA entries and use a generic ATA vendor
	placeholder.  We currently use the same method for all ATA
	drives, although we may have to add vendor-specific
	behavior once we test this with more drives.

sbin/camcontrol/progress.c:
	In progress_draw(), make barlength a signed value so that
	we can easily detect a negative value.

	If barlength (the length of the progress bar) would wind up
	negative due to a small TTY width or a large filename,
	set the bar length to the new minimum (10 stars) and
	truncate the user's filename.  We will truncate it down to
	0 characters if necessary.

	Calculate a new prefix_len variable (user's filename length)
	and use it as the precision when printing the filename.

sbin/camcontrol/camcontrol.c:
	Implement a new camcontrol(8) subcommand, "opcodes".  The
	opcodes subcommand allows displaying the entire list of
	SCSI commands supported by a device, or details on an
	individual command.  In either case, it can display
	nominal and recommended timeout values.

	Add the scsiopcodes() function, which calls the new
	scsigetopcodes() function to fetch opcode data from a
	drive.

	Add two new functions, scsiprintoneopcode() and
	scsiprintopcodes(), which print information about one
	opcode or all opcodes, respectively.

	Remove the get_disk_type() function.  It is no longer used.

	Add a new function, dev_has_vpd_page(), that fetches the
	supported INQUIRY VPD list from a device and tells the
	caller whether the requested VPD page is available.

	Add a new function, get_device_type(), that returns a more
	precise device type than the old get_disk_type() function.
	The get_disk_type() function only distinguished between
	SCSI and ATA devices, and SATA devices behind a SCSI to ATA
	translation layer were considered to be "SCSI".

	get_device_type() offers a third type, CC_DT_ATA_BEHIND_SCSI.
	We need to know this to know whether to attempt to send ATA
	passthrough commands.  If the device has the ATA
	Information VPD page (0x89), then it is an ATA device
	behind a SCSI to ATA translation layer.

	Remove the type argument from the fwdownload() subcommand.

	Add a new function, build_ata_cmd(), that will take one set
	of common arguments and build either a SCSI or ATA I/O CCB,
	depending on the device type passed in.

sbin/camcontrol/camcontrol.h:
	Add a prototype for scsigetopcodes().

	Add a new enumeration, camcontrol_devtype.

	Add prototypes for dev_has_vpd_page(), get_device_type()
	and build_ata_cmd().

	Remove the type argument from the fwdownload() subcommand.

sbin/camcontrol/camcontrol.8
	Explain that the fwdownload subcommand will use the drive
	recommended timeout if available, and that the user can
	override the timeout.

	Document the new opcodes subcommand.

	Explain that we will attempt to download firmware to any
	SATA device.

	Document supported SCSI vendors, and models tested if known.

	Explain the commands used to download firmware for the
	three different drive and controller combinations.

	Document that the -v flag in simulation mode for the fwdownload
	subcommand will print out the SCSI CDBs or ATA registers that would
	be used.

sys/cam/scsi/scsi_all.h:
	Add new bit definitions for the one opcode descriptor for
	the REPORT SUPPORTED OPCODES command.

	Add a function prototype for scsi_report_supported_opcodes().

sys/cam/scsi/scsi_all.c:
	Add a new CDB building function, scsi_report_supported_opcodes().

Sponsored by:	Spectra Logic
MFC after:	1 week
2015-08-20 16:07:51 +00:00
Xin LI
1ae1bd497f Use arc4random_buf(). While there, unifdef the code for HAVE_ARC4RANDOM.
MFC after:	2 weeks
2015-08-16 23:23:58 +00:00
Dimitry Andric
dbe90f04b4 In ipfw2, avoid left-shifting negative integers, which is undefined.
While here, make some other arguments to htonl(3) unsigned too.

MFC after:	3 days
2015-08-12 21:07:57 +00:00
Hiren Panchasara
0e02b43a07 Make LAG LACP fast timeout tunable through IOCTL.
Differential Revision:	D3300
Submitted by:		LN Sundararajan <lakshmi.n at msystechnologies>
Reviewed by:		wblock, smh, gnn, hiren, rpokala at panasas
MFC after:		2 weeks
Sponsored by:		Panasas
2015-08-12 20:21:04 +00:00
Christian Brueffer
99d43aee11 Fix a few mandoc warnings.
MFC after:	1 week
2015-08-12 10:34:05 +00:00
Mark Felder
f5846f166c sbin/ipfw fix typo: info -> into
example:

DEPRECATED: inserting data into non-existent table sshguard. (auto-created)

Approved by:	bdrewery
2015-08-10 22:02:01 +00:00
Pawel Jakub Dawidek
445bda3f4f Allow to disable BIO_DELETE passthru in fstab for swap-on-geli devices by
passing 'notrim' option.

PR:		198863
Submitted by:	Matthew D. Fuller fullermd at over-yonder dot net
2015-08-08 09:57:38 +00:00
Pawel Jakub Dawidek
46e3447026 Enable BIO_DELETE passthru in GELI, so TRIM/UNMAP can work as expected when
GELI is used on a SSD or inside virtual machine, so that guest can tell
host that it is no longer using some of the storage.

Enabling BIO_DELETE passthru comes with a small security consequence - an
attacker can tell how much space is being really used on encrypted device and
has less data no analyse then. This is why the -T option can be given to the
init subcommand to turn off this behaviour and -t/T options for the configure
subcommand can be used to adjust this setting later.

PR:		198863
Submitted by:	Matthew D. Fuller fullermd at over-yonder dot net

This commit also includes a fix from Fabian Keil freebsd-listen at
fabiankeil.de for 'configure' on onetime providers which is not strictly
related, but is entangled in the same code, so would cause conflicts if
separated out.
2015-08-08 09:51:38 +00:00
Edward Tomasz Napierala
3bb6078985 Whoops, wrong flag.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-08-06 07:49:34 +00:00
Edward Tomasz Napierala
6be30a3001 Tweak mdconfig(8) manual page, in particular revise the EXAMPLES
section.  This removes stuff that doesn't really belong there,
and simplifies examples for the basic operations.

Reviewed by:	wblock@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D3198
2015-08-06 07:47:13 +00:00
Xin LI
b07d93f538 Fix a bug which could make routed(8) daemon exit by sending a special RIP
query from a remote machine, similar to SA-14:21.routed.

Submitted by:	hrs
2015-08-05 22:04:56 +00:00
Alexander V. Chernikov
0b501d960c Fix ipfw range deletion.
Spotted by:	ian,julian
2015-08-03 14:31:06 +00:00
George V. Neville-Neil
afd010c196 Add support for keys that include 4 byte SALT values,
including GCM and ICM/CTR modes for AES.

Reviewed by:	jmg
MFC after:	1 week
Sponsored by:	Rubicon Communications (Netgate)
2015-07-31 23:40:18 +00:00
George V. Neville-Neil
2deb37542b Summary: Remove unsupported 3des-deriv encryption algorithm from documentation. 2015-07-31 17:41:53 +00:00
Warner Losh
aa255ef6dd Teach sysctl about the new optional suffix after IK to specify
precision. Update input as well. Add IK to the manual (it was missing
completely).

Differential Revision: https://reviews.freebsd.org/D3181
2015-07-29 02:34:25 +00:00
Edward Tomasz Napierala
ef159a1b45 Add missing SIGUSR1 description.
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2015-07-24 18:14:57 +00:00
Conrad Meyer
773e56519d mount_nfs: Be more clear on nmount(2) error with errmsg unset
Differential Revision:	https://reviews.freebsd.org/D3147
Reviewed by:	rmacklem
Approved by:	markj (mentor)
MFC after:	2 weeks
Sponsored by:	EMC / Isilon Storage Division
2015-07-22 22:53:40 +00:00
Jim Harris
628683cb81 nvmecontrol: read controller identify data before any log page operations
MFC after:	3 days
Sponsored by:	Intel
2015-07-22 16:10:29 +00:00
Andrey V. Elsukov
109f7a27c4 lseek() allows an offset to be set beyond the end of file. Using
it to check that partition has enough space to write bootcode doesn't
work. Use the known size of provider instead.

PR:		201504
MFC after:	1 week
2015-07-21 06:18:42 +00:00
George V. Neville-Neil
a413464757 Only report the lack of ALTQ support if pfctl is using verbose (-v) mode.
PR:		194935
Submitted by:	Jim Thompson
MFC after:	2 weeks
2015-07-20 23:24:25 +00:00
Edward Tomasz Napierala
4a2a044965 Document suspend/resume notification in devd.conf(5).
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2015-07-18 12:24:54 +00:00
Edward Tomasz Napierala
cdff99588e Add CARP events description to devd.conf(5).
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2015-07-18 12:17:59 +00:00