"BSM conversion requested for unknown event 43140"
It should be noted that we need to audit the fd argument for this system
call.
Obtained from: TrustedBSD Project
MFC after: 1 week
conjuction with 'thread' argument passing which is always curthread.
Remove the unuseful extra-argument and pass explicitly curthread to lower
layer functions, when necessary.
KPI results broken by this change, which should affect several ports, so
version bumping and manpage update will be further committed.
Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
Remove this argument and pass curthread directly to underlying
VOP_LOCK1() VFS method. This modify makes the code cleaner and in
particular remove an annoying dependence helping next lockmgr() cleanup.
KPI results, obviously, changed.
Manpage and FreeBSD_version will be updated through further commits.
As a side note, would be valuable to say that next commits will address
a similar cleanup about VFS methods, in particular vop_lock1 and
vop_unlock.
Tested by: Diego Sardina <siarodx at gmail dot com>,
Andrea Di Pasquale <whyx dot it at gmail dot com>
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
for that argument. This will allow DDB to detect the broad category of
reason why the debugger has been entered, which it can use for the
purposes of deciding which DDB script to run.
Assign approximate why values to all current consumers of the
kdb_enter() interface.
would be properly disposed of, but the global label structure for the
semaphore wouldn't be freed.
MFC after: 3 days
Reported by: tanyong <tanyong at ercist dot iscas dot ac dot cn>,
zhouzhouyi
supports the removal of hard-coded audit class constants in OpenBSM
1.0. All audit classes are now dynamically configured via the
audit_class database.
Obtained from: TrustedBSD Project
entry point, which is no longer required now that we don't support
old-style multicast tunnels. This removes the last mbuf object class
entry point that isn't init/copy/destroy.
Obtained from: TrustedBSD Project
Framework by moving from mac_mbuf_create_netlayer() to more specific
entry points for specific network services:
- mac_netinet_firewall_reply() to be used when replying to in-bound TCP
segments in pf and ipfw (etc).
- Rename mac_netinet_icmp_reply() to mac_netinet_icmp_replyinplace() and
add mac_netinet_icmp_reply(), reflecting that in some cases we overwrite
a label in place, but in others we apply the label to a new mbuf.
Obtained from: TrustedBSD Project
in the TrustedBSD MAC Framework:
- Add mac_atalk.c and add explicit entry point mac_netatalk_aarp_send()
for AARP packet labeling, rather than using a generic link layer
entry point.
- Add mac_inet6.c and add explicit entry point mac_netinet6_nd6_send()
for ND6 packet labeling, rather than using a generic link layer entry
point.
- Add expliict entry point mac_netinet_arp_send() for ARP packet
labeling, and mac_netinet_igmp_send() for IGMP packet labeling,
rather than using a generic link layer entry point.
- Remove previous genering link layer entry point,
mac_mbuf_create_linklayer() as it is no longer used.
- Add implementations of new entry points to various policies, largely
by replicating the existing link layer entry point for them; remove
old link layer entry point implementation.
- Make MAC_IFNET_LOCK(), MAC_IFNET_UNLOCK(), and mac_ifnet_mtx global
to the MAC Framework rather than static to mac_net.c as it is now
needed outside of mac_net.c.
Obtained from: TrustedBSD Project
we move towards netinet as a pseudo-object for the MAC Framework.
Rename 'mac_create_mbuf_linklayer' to 'mac_mbuf_create_linklayer' to
reflect general object-first ordering preference.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
This change introduces audit_proc_coredump() which is called by coredump(9)
to create an audit record for the coredump event. When a process
dumps a core, it could be security relevant. It could be an indicator that
a stack within the process has been overflowed with an incorrectly constructed
malicious payload or a number of other events.
The record that is generated looks like this:
header,111,10,process dumped core,0,Thu Oct 25 19:36:29 2007, + 179 msec
argument,0,0xb,signal
path,/usr/home/csjp/test.core
subject,csjp,csjp,staff,csjp,staff,1101,1095,50457,10.37.129.2
return,success,1
trailer,111
- We allocate a completely new record to make sure we arent clobbering
the audit data associated with the syscall that produced the core
(assuming the core is being generated in response to SIGABRT and not
an invalid memory access).
- Shuffle around expand_name() so we can use the coredump name at the very
beginning of the coredump call. Make sure we free the storage referenced
by "name" if we need to bail out early.
- Audit both successful and failed coredump creation efforts
Obtained from: TrustedBSD Project
Reviewed by: rwatson
MFC after: 1 month
primary object type, and then by secondarily by method name. This sorts
entry points relating to particular objects, such as pipes, sockets, and
vnodes together.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
from mac_vfs.c to mac_process.c to join other functions that setup up
process labels for specific purposes. Unlike the two proc create calls,
this call is intended to run after creation when a process registers as
the NFS daemon, so remains an _associate_ call..
Obtained from: TrustedBSD Project
than mac_<policy>_whatever, as this shortens the names and makes the code
a bit easier to read.
When dealing with label structures, name variables 'mb', 'ml', 'mm rather
than the longer 'mac_biba', 'mac_lomac', and 'mac_mls', likewise making
the code a little easier to read.
Obtained from: TrustedBSD Project
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
state is stored in an extended subject token now. Make sure
that we are using the extended data. This fixes the termID
for process tokens.
Obtained from: TrustedBSD Project
Discussed with: rwatson
MFC after: 1 week
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it turns out that most of these
calls actually end up being moved back to the thread version
when it's added. but we need to make this cosmetic change first.
I'd LOVE to do this rename in 7.0 so that we can eventually MFC the
new kthread_xxx() calls.
on multiple different audit pipes. The old method used cv_signal()
which would result in only one thread being woken up after we
appended a record to it's queue. This resulted in un-timely wake-ups
when processing audit records real-time.
- Assign PSOCK priority to threads that have been sleeping on a read(2).
This is the same priority threads are woken up with when they select(2)
or poll(2). This yields fairness between various forms of sleep on
the audit pipes.
Obtained from: TrustedBSD Project
Discussed with: rwatson
MFC after: 1 week
- p_sflag was mostly protected by PROC_LOCK rather than the PROC_SLOCK or
previously the sched_lock. These bugs have existed for some time.
- Allow swapout to try each thread in a process individually and then
swapin the whole process if any of these fail. This allows us to move
most scheduler related swap flags into td_flags.
- Keep ki_sflag for backwards compat but change all in source tools to
use the new and more correct location of P_INMEM.
Reported by: pho
Reviewed by: attilio, kib
Approved by: re (kensmith)
point to mac_check_vnode_unlink(), reflecting UNIX naming conventions.
This is the first of several commits to synchronize the MAC Framework
in FreeBSD 7.0 with the MAC Framework as it will appear in Mac OS X
Leopard.
Reveiwed by: csjp, Samy Bahra <sbahra at gwu dot edu>
Submitted by: Jacques Vidrine <nectar at apple dot com>
Obtained from: Apple Computer, Inc.
Sponsored by: SPARTA, SPAWAR
Approved by: re (bmah)
previously conditionally acquired Giant based on debug.mpsafenet. As that
has now been removed, they are no longer required. Removing them
significantly simplifies error-handling in the socket layer, eliminated
quite a bit of unwinding of locking in error cases.
While here clean up the now unneeded opt_net.h, which previously was used
for the NET_WITH_GIANT kernel option. Clean up some related gotos for
consistency.
Reviewed by: bz, csjp
Tested by: kris
Approved by: re (kensmith)
vnode label for a check rather than the directory vnode label a second
time.
MFC after: 3 days
Submitted by: Zhouyi ZHOU <zhouzhouyi at FreeBSD dot org>
Reviewed by: csjp
Sponsored by: Google Summer of Code 2007
Approved by: re (bmah)
- Sort copyrights by date.
- Re-wrap, and in some cases, fix comments.
- Fix tabbing, white space, remove extra blank lines.
- Remove commented out debugging printfs.
Approved by: re (kensmith)
and replace with software-testable sysctl node (security.audit) that
can be used to detect kernel audit support.
Obtained from: TrustedBSD Project
Approved by: re (kensmith)
- In audit_bsm.c, make sure all the arguments: ARG_AUID, ARG_ASID, ARG_AMASK,
and ARG_TERMID{_ADDR} are valid before auditing their arguments. (This is done
for both setaudit and setaudit_addr.
- Audit the arguments passed to setaudit_addr(2)
- AF_INET6 does not equate to AU_IPv6. Change this in au_to_in_addr_ex() so the
audit token is created with the correct type. This fixes the processing of the
in_addr_ex token in users pace.
- Change the size of the token (as generated by the kernel) from 5*4 bytes to
4*4 bytes (the correct size of an ip6 address)
- Correct regression from ucred work which resulted in getaudit() not returning
E2BIG if the subject had an ip6 termid
- Correct slight regression in getaudit(2) which resulted in the size of a pointer
being passed instead of the size of the structure. (This resulted in invalid
auditinfo data being returned via getaudit(2))
Reviewed by: rwatson
Approved by: re@ (kensmith)
Obtained from: TrustedBSD Project
MFC after: 1 month
mpo_check_proc_setaudit_addr to be used when controlling use of
setaudit_addr(), rather than mpo_check_proc_setaudit(), which takes a
different argument type.
Reviewed by: csjp
Approved by: re (kensmith)
some cases, move to priv_check() if it was an operation on a thread and
no other flags were present.
Eliminate caller-side jail exception checking (also now-unused); jail
privilege exception code now goes solely in kern_jail.c.
We can't yet eliminate suser() due to some cases in the KAME code where
a privilege check is performed and then used in many different deferred
paths. Do, however, move those prototypes to priv.h.
Reviewed by: csjp
Obtained from: TrustedBSD Project
embedded storage in struct ucred. This allows audit state to be cached
with the thread, avoiding locking operations with each system call, and
makes it available in asynchronous execution contexts, such as deep in
the network stack or VFS.
Reviewed by: csjp
Approved by: re (kensmith)
Obtained from: TrustedBSD Project
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-process
scheduling synchronization.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
argument from being file descriptor index into the pointer to struct file:
part 2. Convert calls missed in the first big commit.
Noted by: rwatson
Pointy hat to: kib
remove associated comments.
Slip audit_file_rotate_wait assignment in audit_rotate_vnode() before
the drop of the global audit mutex.
Obtained from: TrustedBSD Project
inline it when needed already, and the symbol is also required outside of
audit.c. This silences a new gcc warning on the topic of using __inline__
instead of __inline.
MFC after: 3 days
where similar data structures exist to support devfs and the MAC
Framework, but are named differently.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA, Inc.
variable name conventions for arguments passed into the framework --
for example, name network interfaces 'ifp', sockets 'so', mounts 'mp',
mbufs 'm', processes 'p', etc, wherever possible. Previously there
was significant variation in this regard.
Normalize copyright lists to ranges where sensible.
labels: the mount label (label of the mountpoint) and the fs label (label
of the file system). In practice, policies appear to only ever use one,
and the distinction is not helpful.
Combine mnt_mntlabel and mnt_fslabel into a single mnt_label, and
eliminate extra machinery required to maintain the additional label.
Update policies to reflect removal of extra entry points and label.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA, Inc.
the introduction of priv(9) and MAC Framework entry points for privilege
checking/granting. These entry points exactly aligned with privileges and
provided no additional security context:
- mac_check_sysarch_ioperm()
- mac_check_kld_unload()
- mac_check_settime()
- mac_check_system_nfsd()
Add mpo_priv_check() implementations to Biba and LOMAC policies, which,
for each privilege, determine if they can be granted to processes
considered unprivileged by those two policies. These mostly, but not
entirely, align with the set of privileges granted in jails.
Obtained from: TrustedBSD Project
- Redistribute counter declarations to where they are used, rather than at
the file header, so it's more clear where we do (and don't) have
counters.
- Add many more counters, one per policy entry point, so that many
individual access controls and object life cycle events are tracked.
- Perform counter increments for label destruction explicitly in entry
point functions rather than in LABEL_DESTROY().
- Use LABEL_INIT() instead of SLOT_SET() directly in label init functions
to be symmetric with destruction.
- Align counter names more carefully with entry point names.
- More constant and variable name normalization.
Obtained from: TrustedBSD Project
- Add a more detailed comment describing the mac_test policy.
- Add COUNTER_DECL() and COUNTER_INC() macros to declare and manage
various test counters, reducing the verbosity of the test policy
quite a bit.
- Add LABEL_CHECK() macro to abbreviate normal validation of labels.
Unlike the previous check macros, this checks for a NULL label and
doesn't test NULL labels. This means that optionally passed labels
will now be handled automatically, although in the case of optional
credentials, NULL-checks are still required.
- Add LABEL_DESTROY() macro to abbreviate the handling of label
validation and tear-down.
- Add LABEL_NOTFREE() macro to abbreviate check for non-free labels.
- Normalize the names of counters, magic values.
- Remove unused policy "enabled" flag.
Obtained from: TrustedBSD Project
calls. Add MAC Framework entry points and MAC policy entry points for
audit(), auditctl(), auditon(), setaudit(), aud setauid().
MAC Framework entry points are only added for audit system calls where
additional argument context may be useful for policy decision-making; other
audit system calls without arguments may be controlled via the priv(9)
entry points.
Update various policy modules to implement audit-related checks, and in
some cases, other missing system-related checks.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA, Inc.
tokens. Currently, we do not support the set{get}audit_addr(2) system
calls which allows processes like sshd to set extended or ip6
information for subject tokens.
The approach that was taken was to change the process audit state
slightly to use an extended terminal ID in the kernel. This allows
us to store both IPv4 IPv6 addresses. In the case that an IPv4 address
is in use, we convert the terminal ID from an struct auditinfo_addr to
a struct auditinfo.
If getaudit(2) is called when the subject is bound to an ip6 address,
we return E2BIG.
- Change the internal audit record to store an extended terminal ID
- Introduce ARG_TERMID_ADDR
- Change the kaudit <-> BSM conversion process so that we are using
the appropriate subject token. If the address associated with the
subject is IPv4, we use the standard subject32 token. If the subject
has an IPv6 address associated with them, we use an extended subject32
token.
- Fix a couple of endian issues where we do a couple of byte swaps when
we shouldn't be. IP addresses are already in the correct byte order,
so reading the ip6 address 4 bytes at a time and swapping them results
in in-correct address data. It should be noted that the same issue was
found in the openbsm library and it has been changed there too on the
vendor branch
- Change A_GETPINFO to use the appropriate structures
- Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does,
but can also handle ip6 addresses
- Adjust get{set}audit(2) syscalls to convert the data
auditinfo <-> auditinfo_addr
- Fully implement set{get}audit_addr(2)
NOTE: This adds the ability for processes to correctly set extended subject
information. The appropriate userspace utilities still need to be updated.
MFC after: 1 month
Reviewed by: rwatson
Obtained from: TrustedBSD
and flags with an sxlock. This leads to a significant and measurable
performance improvement as a result of access to shared locking for
frequent lookup operations, reduced general overhead, and reduced overhead
in the event of contention. All of these are imported for threaded
applications where simultaneous access to a shared file descriptor array
occurs frequently. Kris has reported 2x-4x transaction rate improvements
on 8-core MySQL benchmarks; smaller improvements can be expected for many
workloads as a result of reduced overhead.
- Generally eliminate the distinction between "fast" and regular
acquisisition of the filedesc lock; the plan is that they will now all
be fast. Change all locking instances to either shared or exclusive
locks.
- Correct a bug (pointed out by kib) in fdfree() where previously msleep()
was called without the mutex held; sx_sleep() is now always called with
the sxlock held exclusively.
- Universally hold the struct file lock over changes to struct file,
rather than the filedesc lock or no lock. Always update the f_ops
field last. A further memory barrier is required here in the future
(discussed with jhb).
- Improve locking and reference management in linux_at(), which fails to
properly acquire vnode references before using vnode pointers. Annotate
improper use of vn_fullpath(), which will be replaced at a future date.
In fcntl(), we conservatively acquire an exclusive lock, even though in
some cases a shared lock may be sufficient, which should be revisited.
The dropping of the filedesc lock in fdgrowtable() is no longer required
as the sxlock can be held over the sleep operation; we should consider
removing that (pointed out by attilio).
Tested by: kris
Discussed with: jhb, kris, attilio, jeff
system calls now enter without Giant held, and then in some cases, acquire
Giant explicitly.
Remove a number of other MPSAFE annotations in the credential code and
tweak one or two other adjacent comments.
it isn't used in the access control decision. This became visible to
Coverity with the change to a function call retrieving label values.
Coverity CID: 1723
LABEL_TO_SLOT() macro used by policy modules to query and set label data
in struct label. Instead of using a union, store an intptr_t, simplifying
the API.
Update policies: in most cases this required only small tweaks to current
wrapper macros. In two cases, a single wrapper macros had to be split into
separate get and set macros.
Move struct label definition from _label.h to mac_internal.h and remove
_label.h. With this change, policies may now treat struct label * as
opaque, allowing us to change the layout of struct label without breaking
the policy module ABI. For example, we could make the maximum number of
policies with labels modifiable at boot-time rather than just at
compile-time.
Obtained from: TrustedBSD Project
Don't perform a nested include of _label.h in mac.h, as mac.h now
describes only the user API to MAC, and _label.h defines the in-kernel
representation of MAC labels.
Remove mac.h includes from policies and MAC framework components that do
not use userspace MAC API definitions.
Add _KERNEL inclusion checks to mac_internal.h and mac_policy.h, as these
are kernel-only include files
Obtained from: TrustedBSD Project
(due to an early reset or the like), remember to unlock the socket lock.
This will not occur in 7-CURRENT, but could in theory occur in 6-STABLE.
MFC after: 1 week
been introduced to the MAC framework:
mpo_associate_nfsd_label
mpo_create_mbuf_from_firewall
mpo_check_system_nfsd
mpo_check_vnode_mmap_downgrade
mpo_check_vnode_mprotect
mpo_init_syncache_label
mpo_destroy_syncache_label
mpo_init_syncache_from_inpcb
mpo_create_mbuf_from_syncache
MFC after: 2 weeks [1]
[1] The syncache related entry points will NOT be MFCed as the changes in
the syncache subsystem are not present in RELENG_6 yet.
exclusive access if there is at least one thread waiting for it to
become available. This may significantly reduce overhead by reducing
the number of unnecessary wakeups issued whenever the framework becomes
idle.
Annotate that we still signal the CV more than necessary and should
fix this.
Obtained from: TrustedBSD Project
Reviewed by: csjp
Tested by: csjp
manipulation is visible to the subject process. Remove XXX comments
suggesting this.
Convert one XXX on a difference from Darwin into a note: it's not a
bug, it's a feature.
Obtained from: TrustedBSD Project
- Replace XXX with Note: in several cases where observations are made about
future functionality rather than problems or bugs.
- Remove an XXX comment about byte order and au_to_ip() -- IP headers must
be submitted in network byte order. Add a comment to this effect.
- Mention that we don't implement select/poll for /dev/audit.
Obtained from: TrustedBSD Project
kernel<->policy ABI version. Add a comment to the definition describing
it and listing known versions. Modify MAC_POLICY_SET() to reference the
current kernel version by name rather than by number.
Staticize mac_late, which is used only in mac_framework.c.
Obtained from: TrustedBSD Project
mac_framework.c Contains basic MAC Framework functions, policy
registration, sysinits, etc.
mac_syscalls.c Contains implementations of various MAC system calls,
including ENOSYS stubs when compiling without options
MAC.
Obtained from: TrustedBSD Project
consumes and implements, as well as the location of the framework and
policy modules.
Refactor MAC Framework versioning a bit so that the current ABI version can
be exported via a read-only sysctl.
Further update comments relating to locking/synchronization.
Update copyright to take into account these and other recent changes.
Obtained from: TrustedBSD Project
Framework and security modules, to src/sys/security/mac/mac_policy.h,
completing the removal of kernel-only MAC Framework include files from
src/sys/sys. Update the MAC Framework and MAC policy modules. Delete
the old mac_policy.h.
Third party policy modules will need similar updating.
Obtained from: TrustedBSD Project
subsystems will be a property of policy modules, which may require
access control check entry points to be invoked even when not actively
enforcing (i.e., to track information flow without providing
protection).
Obtained from: TrustedBSD Project
Suggested by: Christopher dot Vance at sparta dot com
than from the slab, but don't.
Document mac_mbuf_to_label(), mac_copy_mbuf_tag().
Clean up white space/wrapping for other comments.
Obtained from: TrustedBSD Project
Exapnd comments on System V IPC labeling methods, which could use improved
consistency with respect to other object types.
Obtained from: TrustedBSD Project
the ifnet itself. The stack copy has been made while holding the mutex
protecting ifnet labels, so copying from the ifnet copy could result in
an inconsistent version being copied out.
Reported by: Todd.Miller@sparta.com
Obtained from: TrustedBSD Project
MFC after: 3 weeks
kernel. This LOR snuck in with some of the recent syncache changes. To
fix this, the inpcb handling was changed:
- Hang a MAC label off the syncache object
- When the syncache entry is initially created, we pickup the PCB lock
is held because we extract information from it while initializing the
syncache entry. While we do this, copy the MAC label associated with
the PCB and use it for the syncache entry.
- When the packet is transmitted, copy the label from the syncache entry
to the mbuf so it can be processed by security policies which analyze
mbuf labels.
This change required that the MAC framework be extended to support the
label copy operations from the PCB to the syncache entry, and then from
the syncache entry to the mbuf.
These functions really should be referencing the syncache structure instead
of the label. However, due to some of the complexities associated with
exposing this syncache structure we operate directly on it's label pointer.
This should be OK since we aren't making any access control decisions within
this code directly, we are merely allocating and copying label storage so
we can properly initialize mbuf labels for any packets the syncache code
might create.
This also has a nice side effect of caching. Prior to this change, the
PCB would be looked up/locked for each packet transmitted. Now the label
is cached at the time the syncache entry is initialized.
Submitted by: andre [1]
Discussed with: rwatson
[1] andre submitted the tcp_syncache.c changes
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
privilege for threads and credentials. Unlike the existing suser(9)
interface, priv(9) exposes a named privilege identifier to the privilege
checking code, allowing more complex policies regarding the granting of
privilege to be expressed. Two interfaces are provided, replacing the
existing suser(9) interface:
suser(td) -> priv_check(td, priv)
suser_cred(cred, flags) -> priv_check_cred(cred, priv, flags)
A comprehensive list of currently available kernel privileges may be
found in priv.h. New privileges are easily added as required, but the
comments on adding privileges found in priv.h and priv(9) should be read
before doing so.
The new privilege interface exposed sufficient information to the
privilege checking routine that it will now be possible for jail to
determine whether a particular privilege is granted in the check routine,
rather than relying on hints from the calling context via the
SUSER_ALLOWJAIL flag. For now, the flag is maintained, but a new jail
check function, prison_priv_check(), is exposed from kern_jail.c and used
by the privilege check routine to determine if the privilege is permitted
in jail. As a result, a centralized list of privileges permitted in jail
is now present in kern_jail.c.
The MAC Framework is now also able to instrument privilege checks, both
to deny privileges otherwise granted (mac_priv_check()), and to grant
privileges otherwise denied (mac_priv_grant()), permitting MAC Policy
modules to implement privilege models, as well as control a much broader
range of system behavior in order to constrain processes running with
root privilege.
The suser() and suser_cred() functions remain implemented, now in terms
of priv_check() and the PRIV_ROOT privilege, for use during the transition
and possibly continuing use by third party kernel modules that have not
been updated. The PRIV_DRIVER privilege exists to allow device drivers to
check privilege without adopting a more specific privilege identifier.
This change does not modify the actual security policy, rather, it
modifies the interface for privilege checks so changes to the security
policy become more feasible.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
sockaddr_storage. This structure is defined in RFC 2553 and is a more
semantically correct structure for holding IP and IP6 sockaddr information.
struct sockaddr is not big enough to hold all the required information for
IP6, resulting in truncated addresses et al when auditing IP6 sockaddr
information.
We also need to assume that the sa->sa_len has been validated before the call to
audit_arg_sockaddr() is made, otherwise it could result in a buffer overflow.
This is being done to accommodate auditing of network related arguments (like
connect, bind et al) that will be added soon.
Discussed with: rwatson
Obtained from: TrustedBSD Project
MFC after: 2 weeks
begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.
This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA
not trust jails enough to execute audit related system calls. An example of
this is with su(1), or login(1) within prisons. So, if the syscall request
comes from a jail return ENOSYS. This will cause these utilities to operate
as if audit is not present in the kernel.
Looking forward, this problem will be remedied by allowing non privileged
users to maintain and their own audit streams, but the details on exactly how
this will be implemented needs to be worked out.
This change should fix situations when options AUDIT has been compiled into
the kernel, and utilities like su(1), or login(1) fail due to audit system
call failures within jails.
This is a RELENG_6 candidate.
Reported by: Christian Brueffer
Discussed with: rwatson
MFC after: 3 days
written to the audit trail file:
- audit_record_write() now returns void, and all file system specific
error handling occurs inside this function. This pushes error handling
complexity out of the record demux routine that hands off to both the
trail and audit pipes, and makes trail behavior more consistent with
pipes as a record destination.
- Rate limit kernel printfs associated with running low on space. Rate
limit audit triggers for low space. Rate limit printfs for fail stop
events. Rate limit audit worker write error printfs.
- Document in detail the types of limits and space checks we perform, and
combine common cases.
This improves the audit subsystems tolerance to low space conditions by
avoiding toasting the console with printfs are waking up the audit daemon
continuously.
MFC after: 3 days
Obtained from: TrustedBSD Project
other problems while labels were first being added to various kernel
objects. They have outlived their usefulness.
MFC after: 1 month
Suggested by: Christopher dot Vance at SPARTA dot com
Obtained from: TrustedBSD Project
when allocating the record in the first place, allocate the final buffer
when closing the BSM record. At that point, more size information is
available, so a sufficiently large buffer can be allocated.
This allows the kernel to generate audit records in excess of
MAXAUDITDATA bytes, but is consistent with Solaris's behavior. This only
comes up when auditing command line arguments, in which case we presume
the administrator really does want the data as they have specified the
policy flag to gather them.
Obtained from: TrustedBSD Project
MFC after: 3 days
with other commonly used sysctl name spaces, rather than declaring them
all over the place.
MFC after: 1 month
Sponsored by: nCircle Network Security, Inc.
audit pipes. If the kernel record was not selected for the trail or the pipe,
any user supplied record attached to it would be tossed away, resulting in
otherwise selected events being lost.
- Introduce two new masks: AR_PRESELECT_USER_TRAIL AR_PRESELECT_USER_PIPE,
currently we have AR_PRESELECT_TRAIL and AR_PRESELECT_PIPE, which tells
the audit worker that we are interested in the kernel record, with
the additional masks we can determine if either the pipe or trail is
interested in seeing the kernel or user record.
- In audit(2), we unconditionally set the AR_PRESELECT_USER_TRAIL and
AR_PRESELECT_USER_PIPE masks under the assumption that userspace has
done the preselection [1].
Currently, there is work being done that allows the kernel to parse and
preselect user supplied records, so in the future preselection could occur
in either layer. But there is still a few details to work out here.
[1] At some point we need to teach au_preselect(3) about the interests of
all the individual audit pipes.
This is a RELENG_6 candidate.
Reviewed by: rwatson
Obtained from: TrustedBSD Project
MFC after: 1 week
exists to allow the mandatory access control policy to properly initialize
mbufs generated by the firewall. An example where this might happen is keep
alive packets, or ICMP error packets in response to other packets.
This takes care of kernel panics associated with un-initialize mbuf labels
when the firewall generates packets.
[1] I modified this patch from it's original version, the initial patch
introduced a number of entry points which were programmatically
equivalent. So I introduced only one. Instead, we should leverage
mac_create_mbuf_netlayer() which is used for similar situations,
an example being icmp_error()
This will minimize the impact associated with the MFC
Submitted by: mlaier [1]
MFC after: 1 week
This is a RELENG_6 candidate
