Commit Graph

258 Commits

Author SHA1 Message Date
Gleb Smirnoff
307b050d3b Convert to if_foreach_llmaddr() KPI. 2019-10-21 18:07:32 +00:00
Conrad Meyer
7790c8c199 Split out a more generic debugnet(4) from netdump(4)
Debugnet is a simplistic and specialized panic- or debug-time reliable
datagram transport.  It can drive a single connection at a time and is
currently unidirectional (debug/panic machine transmit to remote server
only).

It is mostly a verbatim code lift from netdump(4).  Netdump(4) remains
the only consumer (until the rest of this patch series lands).

The INET-specific logic has been extracted somewhat more thoroughly than
previously in netdump(4), into debugnet_inet.c.  UDP-layer logic and up, as
much as possible as is protocol-independent, remains in debugnet.c.  The
separation is not perfect and future improvement is welcome.  Supporting
INET6 is a long-term goal.

Much of the diff is "gratuitous" renaming from 'netdump_' or 'nd_' to
'debugnet_' or 'dn_' -- sorry.  I thought keeping the netdump name on the
generic module would be more confusing than the refactoring.

The only functional change here is the mbuf allocation / tracking.  Instead
of initiating solely on netdump-configured interface(s) at dumpon(8)
configuration time, we watch for any debugnet-enabled NIC for link
activation and query it for mbuf parameters at that time.  If they exceed
the existing high-water mark allocation, we re-allocate and track the new
high-water mark.  Otherwise, we leave the pre-panic mbuf allocation alone.
In a future patch in this series, this will allow initiating netdump from
panic ddb(4) without pre-panic configuration.

No other functional change intended.

Reviewed by:	markj (earlier version)
Some discussion with:	emaste, jhb
Objection from:	marius
Differential Revision:	https://reviews.freebsd.org/D21421
2019-10-17 16:23:03 +00:00
Matt Macy
d7c5a620e2 ifnet: Replace if_addr_lock rwlock with epoch + mutex
Run on LLNW canaries and tested by pho@

gallatin:
Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5
based ConnectX 4-LX NIC, I see an almost 12% improvement in received
packet rate, and a larger improvement in bytes delivered all the way
to userspace.

When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1,
I see, using nstat -I mce0 1 before the patch:

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
4.98   0.00   4.42   0.00 4235592     33   83.80 4720653 2149771   1235 247.32
4.73   0.00   4.20   0.00 4025260     33   82.99 4724900 2139833   1204 247.32
4.72   0.00   4.20   0.00 4035252     33   82.14 4719162 2132023   1264 247.32
4.71   0.00   4.21   0.00 4073206     33   83.68 4744973 2123317   1347 247.32
4.72   0.00   4.21   0.00 4061118     33   80.82 4713615 2188091   1490 247.32
4.72   0.00   4.21   0.00 4051675     33   85.29 4727399 2109011   1205 247.32
4.73   0.00   4.21   0.00 4039056     33   84.65 4724735 2102603   1053 247.32

After the patch

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
5.43   0.00   4.20   0.00 3313143     33   84.96 5434214 1900162   2656 245.51
5.43   0.00   4.20   0.00 3308527     33   85.24 5439695 1809382   2521 245.51
5.42   0.00   4.19   0.00 3316778     33   87.54 5416028 1805835   2256 245.51
5.42   0.00   4.19   0.00 3317673     33   90.44 5426044 1763056   2332 245.51
5.42   0.00   4.19   0.00 3314839     33   88.11 5435732 1792218   2499 245.52
5.44   0.00   4.19   0.00 3293228     33   91.84 5426301 1668597   2121 245.52

Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch

Reviewed by:	gallatin
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
Mark Johnston
306c97e2d8 Add netdump support to re(4).
Tested with a RealTek 8101E adapter.

Reviewed by:	sbruno
MFC after:	1 month
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D15260
2018-05-06 00:52:17 +00:00
Vincenzo Maffione
2ff91c175e netmap: align codebase to the current upstream (commit id 3fb001303718146)
Changelist:
    - Turn tx_rings and rx_rings arrays into arrays of pointers to kring
      structs. This patch includes fixes for ixv, ixl, ix, re, cxgbe, iflib,
      vtnet and ptnet drivers to cope with the change.
    - Generalize the nm_config() callback to accept a struct containing many
      parameters.
    - Introduce NKR_FAKERING to support buffers sharing (used for netmap
      pipes)
    - Improved API for external VALE modules.
    - Various bug fixes and improvements to the netmap memory allocator,
      including support for externally (userspace) allocated memory.
    - Refactoring of netmap pipes: now linked rings share the same netmap
      buffers, with a separate set of kring pointers (rhead, rcur, rtail).
      Buffer swapping does not need to happen anymore.
    - Large refactoring of the control API towards an extensible solution;
      the goal is to allow the addition of more commands and extension of
      existing ones (with new options) without the need of hacks or the
      risk of running out of configuration space.
      A new NIOCCTRL ioctl has been added to handle all the requests of the
      new control API, which cover all the functionalities so far supported.
      The netmap API bumps from 11 to 12 with this patch. Full backward
      compatibility is provided for the old control command (NIOCREGIF), by
      means of a new netmap_legacy module. Many parts of the old netmap.h
      header has now been moved to netmap_legacy.h (included by netmap.h).

Approved by:	hrs (mentor)
2018-04-12 07:20:50 +00:00
Pedro F. Giffuni
df57947f08 spdx: initial adoption of licensing ID tags.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

Initially, only tag files that use BSD 4-Clause "Original" license.

RelNotes:	yes
Differential Revision:	https://reviews.freebsd.org/D13133
2017-11-18 14:26:50 +00:00
Kevin Lo
3d8102824b Disable CLKREQ for ASPM since re(4) doesn't implement link level power saving.
Reviewed by:  yongari
2016-10-27 02:20:13 +00:00
Kevin Lo
938e9a89c4 Add support for the TP-Link TG-3468 v2.
This is an RTL8168 chip, which we already support so all we have to do is add
the vendor ID.

PR:	212876
Submitted by:	Tobias Kortkamp <t@tobik.me>
MFC after:	3 days
2016-09-21 14:15:15 +00:00
Pedro F. Giffuni
73a1170a8c sys/dev: use our nitems() macro when it is avaliable through param.h.
No functional change, only trivial cases are done in this sweep,
Drivers that can get further enhancements will be done independently.

Discussed in:	freebsd-current
2016-04-19 23:37:24 +00:00
John Baldwin
cbc4d2db75 Remove taskqueue_enqueue_fast().
taskqueue_enqueue() was changed to support both fast and non-fast
taskqueues 10 years ago in r154167.  It has been a compat shim ever
since.  It's time for the compat shim to go.

Submitted by:	Howard Su <howard0su@gmail.com>
Reviewed by:	sephe
Differential Revision:	https://reviews.freebsd.org/D5131
2016-03-01 17:47:32 +00:00
Marius Strobl
e9f8886ee1 With r290566 in place it turned out that WOL previously only worked by
accident with RTL8168G and later chips when the interface actually was
brought up. This is due to the fact that with these MAC variants, RXDV
gate needs be disabled for WOL to work. So do just that in re_setwol()
when IFCAP_WOL is requested.
Reported and tested by: dhw

MFC after:	3 days
2015-11-16 21:13:57 +00:00
Marius Strobl
14013280b2 - Although it doesn't make a whole lot of sense to enable RX and TX
before their initial configuration is done, it turns out that r281337
  has the inverse effect on some older chips. Moreover, as with newer
  chips before, two chips seemingly identical according to their MAC
  revisions may behave differently in this regard, with most working
  but a few not, making changes extremely hard to test.
  Closer inspection of the corresponding Linux code suggests that RX
  and TX should only be enabled after their initial configuration with
  RTL8168G and later chips, i. e. RTL8106E{,US}, RTL8107E, as well as
  RTL8168{EP,G,GU,H}, so limit the new code path to these. [1]
- Distinguish between RTL8168H and RTL8107E, with the latter being the
  10/100-Mbit/s-only variant of the former.
- For MAC variants that can only do Fast Ethernet at a maximum, ensure
  that we don't advertise Gigabit Ethernet speed.
- In re_stop(), do the inverse of re_init_locked() and enable RXDV
  gate on RTL8168G and later chips again, matching what Linux does.

PR:		203422 [1]
MFC after:	1 week
2015-11-09 00:19:04 +00:00
Marius Strobl
96b2c26ae1 Add preliminary support for RTL8168H, tested by Sreenath Battalahalli.
MFC after:	1 week
2015-09-13 22:22:30 +00:00
Luigi Rizzo
847bf38369 Sync netmap sources with the version in our private tree.
This commit contains large contributions from Giuseppe Lettieri and
Stefano Garzarella, is partly supported by grants from Verisign and Cisco,
and brings in the following:

- fix zerocopy monitor ports and introduce copying monitor ports
  (the latter are lower performance but give access to all traffic
  in parallel with the application)

- exclusive open mode, useful to implement solutions that recover
  from crashes of the main netmap client (suggested by Patrick Kelsey)

- revised memory allocator in preparation for the 'passthrough mode'
  (ptnetmap) recently presented at bsdcan. ptnetmap is described in
        S. Garzarella, G. Lettieri, L. Rizzo;
        Virtual device passthrough for high speed VM networking,
        ACM/IEEE ANCS 2015, Oakland (CA) May 2015
        http://info.iet.unipi.it/~luigi/research.html

- fix rx CRC handing on ixl

- add module dependencies for netmap when building drivers as modules

- minor simplifications to device-specific routines (*txsync, *rxsync)

- general code cleanup (remove unused variables, introduce macros
  to access rings and remove duplicate code,

Applications do not need to be recompiled, unless of course
they want to use the new features (monitors and exclusive open).

Those willing to try this code on stable/10 can just update the
sys/dev/netmap/*, sys/net/netmap* with the version in HEAD
and apply the small patches to individual device drivers.

MFC after:	1 month
Sponsored by:	(partly) Verisign, Cisco
2015-07-10 05:51:36 +00:00
Marius Strobl
0f55f9d67b Don't enable RX and TX before their initial configuration is done, i. e.
after setting up interrupt moderation but before turning interrupts on.
This matches what Realtek's r8168 Linux driver does as of version 8.039.00
and fixes problems with certain incarnations of certain MAC revisions
like the interface requiring an extra up/down-cycle after boot to start
working or DMA configuration not being adhered to.

PR:		193743, 197535
MFC after:	1 week
2015-04-09 21:35:44 +00:00
Pyun YongHyeon
b8333e4546 It seems multicast filtering of RTL8168F does not work. Workaround
the silicon bug by accepting any multicast packets.

PR:	193488
MFC After:	1 week
2014-10-21 01:31:24 +00:00
Gleb Smirnoff
b2d3d26fa0 Move rl(4) to dev/rl. 2014-09-19 10:32:20 +00:00
Gleb Smirnoff
c8dfaf382f Mechanically convert to if_inc_counter(). 2014-09-19 03:51:26 +00:00
Gleb Smirnoff
1bffa9511f Use define from if_var.h to access a field inside struct if_data,
that resides in struct ifnet.

Sponsored by:	Nginx, Inc.
2014-08-30 19:55:54 +00:00
John Baldwin
068d8643ad Fix various NIC drivers to properly cleanup static DMA resources.
In particular, don't check the value of the bus_dma map against NULL
to determine if either bus_dmamem_alloc() or bus_dmamap_load() succeeded.
Instead, assume that bus_dmamap_load() succeeeded (and thus that
bus_dmamap_unload() should be called) if the bus address for a resource
is non-zero, and assume that bus_dmamem_alloc() succeeded (and thus
that bus_dmamem_free() should be called) if the virtual address for a
resource is not NULL.

In many cases these bugs could result in leaks when a driver was detached.

Reviewed by:	yongari
MFC after:	2 weeks
2014-06-11 14:53:58 +00:00
Pyun YongHyeon
74a034464e Disable TX IP/TCP/UDP checksum offloading for RTL8168C/RTL8168CP.
Previously only TX IP checksum offloading was disabled but it's
reported that TX checksum offloading for UDP datagrams with IP
options also generates corrupted frames.  Reporter's controller is
RTL8168CP but I guess RTL8168C also have the same issue since it
shall share the same core.

Reported and tested by:	tuexen
2014-05-13 05:19:29 +00:00
Marius Strobl
f1a5f291dd - Implement the RX EARLYOFF and RXDV GATED bits as done by RealTek's Linux
driver as version 8.037.00 for RTL8168{E-VL,EP,F,G,GU} and RTL8111B. This
  makes reception of packets work with the RTL8168G (HW rev. 0x4c000000) in
  my Shuttle DS47.
- Consistently use RL_MSI_MESSAGES.
In joint forces with:	yongari

MFC after:	5 days
2014-02-05 23:13:40 +00:00
Luigi Rizzo
ce3ee1e7c4 update to the latest netmap snapshot.
This includes the following:
- use separate memory regions for VALE ports
- locking fixes
- some simplifications in the NIC-specific routines
- performance improvements for the VALE switch
- some new features in the pkt-gen test program
- documentation updates

There are small API changes that require programs to be recompiled
(NETMAP_API has been bumped so you will detect old binaries at runtime).

In particular:
- struct netmap_slot now is 16 bytes to support an extra pointer,
  which may save one data copy when using VALE ports or VMs;
- the struct netmap_if has two extra fields;

MFC after:	3 days
2013-11-01 21:21:14 +00:00
Pyun YongHyeon
c3767eab77 Add preliminary support for RTL8168EP.
Submitted by:	Edward O'Callaghan (eocallaghan <> alterapraxis dot com)
2013-10-29 05:37:05 +00:00
Pyun YongHyeon
ab9f923ebf Add preliminary support for RTL8168G, RTL8168GU and RTL8411B.
RTL8168GU has two variants(GMII and MII) but it uses the same chip
revision id.  Driver checks PCI device id of controller and
sets internal capability flag(i.e. jumbo frame and link speed down
in WOL).

H/W donated by:	RealTek Semiconductor Corp.
2013-10-29 05:30:21 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Pyun YongHyeon
214c71f64d Add preliminary support for RTL8106E PCIe FastEthernet.
H/W donated by:	RealTek Semiconductor Corp.
2013-10-21 06:27:20 +00:00
Pyun YongHyeon
fd3ae0f5be Correct MAC revision bits. Previously it always cleared bit 20 and
bit 21.
2013-10-21 06:22:20 +00:00
Sergey Kandaurov
2df0539200 Correct comment typos. 2013-06-28 14:41:06 +00:00
Luigi Rizzo
d61ba75247 use netmap_rx_irq() / netmap_tx_irq() to handle interrupts in
netmap mode, removing the logic from individual drivers.

(note: if_lem.c not updated yet due to some other pending modifications)
2013-04-30 16:18:29 +00:00
Pyun YongHyeon
3c2a957d2d Disable TX IP header checksum offloading on RL_HWREV_8168CP. The
controller generates wrong checksummed frame if the IP packet has
IP options.

Submitted by:	Alexander Bluhm via brad@openbsd
2013-03-13 02:11:45 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Dimitry Andric
29658c96ce Remove duplicate const specifiers in many drivers (I hope I got all of
them, please let me know if not).  Most of these are of the form:

static const struct bzzt_type {
	[...list of members...]
} const bzzt_devs[] = {
	[...list of initializers...]
};

The second const is unnecessary, as arrays cannot be modified anyway,
and if the elements are const, the whole thing is const automatically
(e.g. it is placed in .rodata).

I have verified this does not change the binary output of a full kernel
build (except for build timestamps embedded in the object files).

Reviewed by:	yongari, marius
MFC after:	1 week
2012-11-05 19:16:27 +00:00
Gavin Atkinson
e935190a33 Switch some PCI register reads from using magic numbers to using the names
defined in pcireg.h

MFC after:	1 week
2012-09-19 12:27:23 +00:00
Gavin Atkinson
389c8bd51e Align the PCI Express #defines with the style used for the PCI-X
#defines.  This also has the advantage that it makes the names more
compact, iand also allows us to correct the non-uniform naming of
the PCIM_LINK_* defines, making them all consistent amongst themselves.

This is a mostly mechanical rename:
  s/PCIR_EXPRESS_/PCIER_/g
  s/PCIM_EXP_/PCIEM_/g
  s/PCIM_LINK_/PCIEM_LINK_/g

When this is MFC'd, #defines will be added for the old names to assist
out-of-tree drivers.

Discussed with:	jhb
MFC after:	1 week
2012-09-18 22:04:59 +00:00
Ed Maste
1221cc675d Use array notation for consistency. 2012-08-13 16:03:30 +00:00
Kevin Lo
de8925a261 Fix size of the bcopy when extracting ethernet address
Obtained from:	DragonFly
2012-06-25 05:47:12 +00:00
Kevin Lo
82242c11a6 Make sure we don't dereference a null pointer 2012-05-11 07:12:18 +00:00
Bjoern A. Zeeb
fca1e0abf3 Do not toggle IFCAP_TSO4 if we would also do TSO6. Given the driver does
not currently announce/support TSO6 that cannot happen. Clean it up anyway
for consistency.

Reviewed by:	yongari
MFC after:	1 week
2012-04-24 08:30:55 +00:00
Pyun YongHyeon
fed3ed710d Prefer RL_GMEDIASTAT register to RGEPHY_MII_SSR register to
extract a link status of PHY when parent driver is re(4).
RGEPHY_MII_SSR register does not seem to report correct PHY status
on some integrated PHYs used with re(4).
Unfortunately, RealTek PHYs have no additional information to
differentiate integrated PHYs from external ones so relying on PHY
model number is not enough to know that.  However, it seems
RGEPHY_MII_SSR register exists for external RealTek PHYs so
checking parent driver would be good indication to know which PHY
was used. In other words, for non-re(4) controllers, the PHY is
external one and its revision number is greater than or equal to 2.
This change fixes intermittent link UP/DOWN messages reported on
RTL8169 controller.

Also, mii_attach(9) is tried after setting interface name since
rgephy(4) have to know parent driver name.

PR:	kern/165509
2012-02-28 05:23:29 +00:00
Luigi Rizzo
64ae02c365 A bunch of netmap fixes:
USERSPACE:
1. add support for devices with different number of rx and tx queues;

2. add better support for zero-copy operation, adding an extra field
   to the netmap ring to indicate how many buffers we have already processed
   but not yet released (with help from Eddie Kohler);

3. The two changes above unfortunately require an API change, so while
   at it add a version field and some spares to the ioctl() argument
   to help detect mismatches.

4. update the manual page for the two changes above;

5. update sample applications in tools/tools/netmap

KERNEL:

1. simplify the internal structures moving the global wait queues
   to the 'struct netmap_adapter';

2. simplify the functions that map kring<->nic ring indexes

3. normalize device-specific code, helps mainteinance;

4. start exploring the impact of micro-optimizations (prefetch etc.)
   in the ixgbe driver.
   Use 'legacy' descriptors on the tx ring and prefetch slots gives
   about 20% speedup at 900 MHz. Another 7-10% would come from removing
   the explict calls to bus_dmamap* in the core (they are effectively
   NOPs in this case, but it takes expensive load of the per-buffer
   dma maps to figure out that they are all NULL.

   Rx performance not investigated.

I am postponing the MFC so i can import a few more improvements
before merging.
2012-02-27 19:05:01 +00:00
Pyun YongHyeon
e7e7593cd8 Use correct Config registers for RTL8139 family. Unlike RTL8168 and
RTL810x family , RTL8139 has different register map for Config
registers.

While here, follow the lead of re(4) in WOL configuration.
 - Disable WOL_UCAST and WOL_MCAST capabilities by default.
 - Config5 register write does not need to unlock EEPROM access
   on RTL8139 family but unlocking EEPROM access does not affect
   its operation and make it consistent with re(4).

Reported by:	Matt Renzelmann  mjr <> cs dot wisc dot edu
2012-02-25 04:54:51 +00:00
Pyun YongHyeon
df2dc2b3ae For RTL8168/8111D controller, make sure to wake PHY from power down
mode.  Otherwise, PHY access times out under certain conditions.
2012-02-14 00:54:40 +00:00
Pyun YongHyeon
bc6b129bcd Fix a logic error which resulted in putting PHY into sleep when WOL
is active.  If WOL is active driver should not put PHY into sleep.
This change makes WOL work on RTL8168E.
2012-01-19 20:13:16 +00:00
Pyun YongHyeon
1f32d3b76f Free allocated jumbo buffers when controller is stopped. 2012-01-17 19:36:53 +00:00
Pyun YongHyeon
cba163625e Use a RX DMA tag to free loaded RX DMA maps.
Previously it used a TX DMA tag.
2012-01-17 19:31:03 +00:00
Luigi Rizzo
579a6e3c4e add netmap support for "em", "lem", "igb" and "re".
On my hardware, "em" in netmap mode does about 1.388 Mpps
on one card (on an Asus motherboard), and 1.1 Mpps on another
card (PCIe bus). Both seem to be NIC-limited, because
i have the same rate even with the CPU running at 150 MHz.

On the "re" driver the tx throughput is around 420-450 Kpps
on various (8111C and the like) chipsets. On the Rx side
performance seems much better, and i can receive the full
load generated by the "em" cards.

"igb" is untested as i don't have the hardware.
2011-12-05 15:33:13 +00:00
Pyun YongHyeon
6830588dd1 To save more power, switch to 10/100Mbps link when controller is
put into suspend/shutdown.  Old PCI controllers performed that
operation in firmware but for RTL8111C or newer controllers, it's
responsibility of driver.  It's not clear whether the firmware of
RTL8111B still downgrades its speed to 10/100Mbps so leave it as it
was.
2011-11-23 23:29:18 +00:00
Pyun YongHyeon
eef0e49628 Make sure to stop TX MAC before freeing queued TX frames.
For RTL8111DP, check if the TX MAC is active by reading RL_GTXSTART
register.  For RTL8402/8168E-VL/8168F/8411, wait until TX queue is
empty.
2011-11-23 22:07:13 +00:00
Pyun YongHyeon
fcb220acd1 Disable accepting frames in re_stop() to put RX MAC into idle state.
Because there is no reliable way to know whether RX MAC is in
stopped state, rejecting all frames would be the only way to
minimize possible races.
Otherwise it's possible to receive frames while stop command
execution is in progress and controller can DMA the frame to freed
RX buffer during that period.
This was observed on recent PCIe controllers(i.e. RTL8111F).

While this change may not be required on old controllers it
wouldn't make negative effects on old controllers.  One side effect
of this change is disabling receive so driver reprograms RL_RXCFG
to receive WOL frames when it is put into suspend or shutdown.

This should address occasional 'memory modified free' errors seen
on recent RealTek controllers.
2011-11-23 02:08:05 +00:00