within the VBE interrupt handler. Unfortunately it was causing real mode
page faults because we were fetching instructions from bogus addresses.
Pass me the pointyhat, please.
PR: kern/144654
MFC after: 3 days
to the image_params struct instead of several members of that struct
individually. This makes it easier to expand its arguments in the future
without touching all platforms.
Reviewed by: jhb
executable status of segments instead of detecting the main text segment
by which segment contains the program entry point. This affects
obreak() and is required for correct operation of that function
on 64-bit PowerPC systems. The previous behavior was apparently
required only for the Alpha, which is no longer supported.
Reviewed by: jhb
Tested on: amd64, sparc64, powerpc
enabled. Basically most of the operations were incorrect causing
bad sacks when you enabled nr-sack. The fixes range across
4 files and unifiy most of the processing so that we only test
nr_sack flags to decide which type of sack to generate.
Optimization left for this is to combine the sack generation
code and make it capable of generating either sack thus shrinking
out a routine.
Reviewed by: tuexen@freebsd.org
panic: rw lock not unlocked
was not really helpful for debugging. Now one can at least call
show lock <ptr>
form ddb to learn more about the lock.
MFC after: 3 days
so should be copied to userspace with suword32() instead of suword().
This alleviates problems on 64-bit big-endian architectures, and is a
no-op on all 32-bit architectures.
Tested on: amd64, sparc64, powerpc64
AMD Family 10h Erratum 383, to i386.
Enable machine check exceptions by default, just like r204913 for amd64.
Enable superpage promotion only if the processor actually supports large
pages, i.e., PG_PS.
MFC after: 2 weeks
First, we compare mode table data against minimum value. If the mode table
does not make sense, we set the minimum in the mode info. When we actually
set the mode, we try VESA BIOS function and compare it against the previous
value. If it makes more sense, update the information.
cache, it did not free the request argument mbuf list, resulting in a leak.
This patch fixes that leak.
Tested by: danny AT cs.huji.ac.il
PR: kern/144330
Submitted by: to.my.trociny AT gmail.com (earlier version)
Reviewed by: dfr
MFC after: 2 weeks
has all 4 implemented, but across the processors we now support all the
combinations. For example, the MPC8533 doesn't have a PCI controller
at 0xA0000, but does at 0xB0000.
sure the caches remain coherent. For single-core configurations and
with busdma changes we could eventually switch to "nap" and force
a D-cache invalidation as part of the DMA completion. To this end,
clear PSL_WE until after we handled the decrementer or external
interrupt as it tells us whether we just woke up or not.
iv_recv_mgmt(). iv_recv_mgmt() will generate management frame responses
and pass them to bpf before the management frame that triggered the
response.
PR: 144323
Submitted by: Alexander Egorenkov <egorenar at gmail.com>
MFC after: 2 weeks
Sponsored by: iXsystems, inc.
in Open Firmware was Apple-specific, and we have complete coverage of Apple
system controllers, so move RTC responsibilities into the system controller
drivers. This avoids interesting problems from manipulating these devices
through Open Firmware behind the backs of their drivers.
Obtained from: NetBSD
MFC after: 2 weeks
mapping_array expansion would break. Basically
once we expanded the array we no longer had both
mapping arrays in sync which the sack processing code depends on.
This would mean we were randomly referring to memory that was probably
not there. This mostly just gave us bad sack results going back to the peer.
If INVARIENTS was on of course we would hit the panic routine in the sack_check
call.
We also add a print routine for the place where one would panic in
invarients so one can see what the main mapping array holds.
Reviewed by: tuexen@freebsd.org
MFC after: 2 weeks
- increase flow cleaning frequency and decrease flow caching time
when near the flow limit
- stop allocating new flows when within 3% of maxflows don't start
allocating again until below 12.5%
MFC after: 7 days
other than in a potentially dangerous KASSERT.
o Hand-inline pmap_remove_page() as it's only called from 1 place and
the abstraction that pmap_remove_page() provides is not enough to
warrant the obfuscation. Eliminate the dangerous KASSERT in the
process.
o In pmap_remove_pte(), remove the KASSERT for pmap being the current
one as it's not safe in the face of CPU migration.
than in a KASSERT. The KASSERT is broken in that it's done outside the
critical section and as such isn't protected against CPU migration.
Improve pmap_invalidate_page() as follows:
o calculate vhpt_ofs inside the critical region for exactly the same
reason.
o calculate the tag outside the FOREACH loop, as it's loop-invariant.
This is more efficient.
o Replace the test and set with an atomic cmpset operation because we
are changing other CPU's VHPT tables and this avoids invalidating
after the entry got modified. Not necessarily a problem, but better
safe than sorry.
before we grab the mutex. Don't assert that they must be disabled at
that point. We pretty much bypass all logic in that case anyway and
leave immediately, so there's no harm.
preemption doesn't happen until after all pending interrupt have
been services.
While here again, simplify the EOI handling by doing it after we
call the XIV-specific handlers, rather than in each of them. The
original thought was that we may want to do an EOI first and the
actual IPI handling next, but that's mostly a micro-optimization.
cycles. This serves 2 purposes:
1. It prevents preemption and CPU migration while running SAL code.
2. It reduces the chance of stack overflows: we're supposed to enter
SAL with at least 16KB of either memory- or register stack space,
which we can't do without switching to a different stack.
This is not for multiple inclusion purposes, because _regset.h already
handles this, but to enable inclusion of the MD header by cross-tools
on non-ia64 installations. The cross-tool can include _regset.h itself
before including MD headers that depend on it.
According to POSIX open() must return ENOTDIR when the path name does
not refer to a path name. Change vn_open() to respect this flag. This
also simplifies the Linuxolator a bit.
7 which corresponds to WSTATE_KMIX in OpenSolaris whenever calling into
it which totally screws us even when restoring %wstate afterwards as
spill/fill traps can happen while in OFW. The rather hackish OpenBSD
approach of just setting the equivalent of WSTATE_KERNEL to 7 also is
no option as we treat %wstate as a bit field. So in order to deal with
this problem actually implement spill/fill handlers for %wstate 7 which
just act as the WSTATE_KERNEL ones except of theoretically also handling
32-bit, turn off interrupts completely so we don't even take IPIs while
in OFW which should ensure we only take spill/fill traps at most and
restore %wstate after calling into OFW once we have taken over the trap
table. While at it, actually set WSTATE_{,PROM}_KMIX before calling into
OFW just like OpenSolaris does, which should at least help testing this
change on non-V1280.
- Remove comments referring to the %wstate usage in BSD/OS.
- Remove the no longer used RSF_ALIGN_RETRY macro.
- Correct some trap table addresses in comments.
- Ensure %wstate is set to WSTATE_KERNEL when taking over the trap table.
- Ensure PSTATE_AM is off when entering or exiting to OFW as well as that
interrupts are also completely off when exiting to OFW as the firmware
trap table shouldn't be used to handle our interrupts.
can actually use all of the available lockable entries of the tiny dTLB
for the kernel TSB. With this change the KVA space sizing happens to be
more in line with the MI one so up to at least 24GB machines KVA doesn't
need to be limited manually. This is just another stopgap though, the
real solution is to take advantage of ASI_ATOMIC_QUAD_LDD_PHYS on CPUs
providing it so we don't need to lock the kernel TSB pages into the dTLB
in the first place.
provider names.
- Characters in range 0x01-0x1f except '\t', '\n', and '\r' are replaced
with '?'. Those characters are disallowed in XML.
- '&', '<', '>', '\'', '"' and characters in range 0x7f-0xff are
replaced with XML numeric character reference.
If the kern.geom.confxml sysctl provides invalid XML, libgeom
geom_xml2tree() fails and utilities using it do not work. Unsafe
characters are common in msdosfs and cd9660 labels.
PR: kern/104389
Submitted by: Doug Steinwand (original version)
Reviewed by: pjd
Discussed on: freebsd-geom
MFC after: 3 weeks
generally protected by the VM page queue mutex. Instead of extending the
table lock to cover the PVO heads, add some asserts that the page queue
mutex is in fact held. This fixes several LORs and possible deadlocks.
This also adds an optimization to moea64_kextract() useful for
direct-mapped quantities, like UMA buffers. Being able to use this from
inside UMA removes an additional LOR.
frequency. This counter can be accessed coherently from both cores.
Use this as the preferred timecounter for the SWARM kernels.
The CP0 COUNT register is unusable as the timecounter on SMP platforms because
the COUNT registers on different CPUs are not guaranteed to be in sync.
when sb_load64() returns.
Some 32-bit arithmetic operations (e.g. subu) have unpredicatable results
when operating on 64-bit registers that are not properly sign-extended.
mapped kseg0 region.
The basic idea is to use KVA from the kseg2 region for mapping page
table pages that lie beyond the direct mapped region.
The TLB miss handler can now recursively fault into the TLB invalid
handler if it dereferences a kseg2 page table page address that is not
in the TLB.
Tested by: JC (c.jayachandran@gmail.com)
Andrew Turner. The kernel supports the LN2410SBC evaluation board,
and likely others. These parts (or similar ones) are in some open
hardware designs for phones.
Submitted by: Andrew Turner
- Print the initial memory map when bootverbose is set.
- Change the page fault address format from linear to %cs:%ip style.
- Move duplicate code into a newly added function.
- Add strictly aligned memory access for distant future. ;-)
The order of operations is the following:
1. Try to open vdev by remembered path and guid.
2. If 1 failed, try to find vdev which guid matches and ignore the path.
3. If 2 failed this means either that the vdev we're looking for is gone
or that pool is being created and vdev doesn't contain proper guid yet.
To be able to handle pool creation we open vdev by path anyway.
Because of 3 it is possible that we open wrong vdev on import which can lead to
confusions.
The solution for this is to check spa_load_state. On pool creation it will be
equal to SPA_LOAD_NONE and we can open vdev only by path immediately and if it
is not equal to SPA_LOAD_NONE we first open by path+guid and when that fails,
we open by guid. We no longer open wrong vdev on import.
MFC after: 2 weeks
that provides the allocated and setup eventhandler entry.
Add a new wrapper for VIMAGE that allocates extra space to hold the
callback function and argument in addition to an extra wrapper function.
While the wrapper function goes as normal callback function the
argument points to the extra space allocated holding the original func
and arg that the wrapper function can then call.
Provide an iterator function for the virtual network stack (vnet) that
will call the callback function for each network stack.
Provide a new set of macros for VNET that in the non-VIMAGE case will
just call eventhandler_register() while in the VIMAGE case it will use
vimage_eventhandler_register() passing in the extra iterator function
but will only register once rather than per-vnet.
We need a special macro in case we are interested in the tag returned
as we must check for curvnet and can neither simply assign the
return value, nor not change it in the non-vnet0 case without that.
Sponsored by: ISPsystem
Discussed with: jhb
Reviewed by: zec (earlier version), jhb
MFC after: 1 month
checksums as the base acpi(4) driver. This fixes a problem where the MADT
parser would reject the MADT table during early boot causing the MP Table
to be, but then the acpi(4) driver would attach and use non-SMP interrupt
routing.
Tested by: Alastair Hogge agh of coolrhaug com
MFC after: 1 week
sysv_{msg,sem,shm}.c files.
Mark SysV IPC freebsd32 syscalls as NOSTD and add required
SYSCALL_INIT_HELPER/SYSCALL32_INIT_HELPERs to provide auto
register/unregister on module load.
This makes COMPAT_FREEBSD32 functional with SysV IPC compiled and loaded
as modules.
Reviewed by: jhb
MFC after: 2 weeks
FOr SYSCALL32_MODULE_HELPER, use "sys32/<syscallname>" module name.
This avoids modules name conflict when compat32 syscall does not
need shims.
Note that SYSCALL_MODULE_HELPER is going to be unused in the tree by
several next commits.
Suggested by: jhb
MFC after: 2 weeks
that we support I486 and I586 CPUs in the GENERIC kernel, users wants these
support would have to build a custom kernel to explicitly disable SSE
anyways.
MFC after: 1 month
o Process the BAR frame on the adhoc, mesh and sta modes
o Fix the format of the ADDBA reply frame
o Fix references to the spec section numbers
Also, print the all the MCS rates in bootverbose.
Sponsored by: iXsystems, Inc.
Obtained from: //depot/user/rpaulo/80211n/...
- show all lltables [1] (optional flag to also show the llentries as well)
- show lltable <struct lltable *>
- show llentry <struct llentry *>
MFC after: 6 days
- Swap the configuration of the first and second large dTLB as with
US-IV+ these can only hold entries of certain page sizes each, which
we happened to chose the non-working way around.
- Additionally ensure that the large iTLB is set up to hold 8k pages
(currently this happens to be a NOP though).
- Add a workaround for US-IV+ erratum #2.
- Turn off dTLB parity error reporting as otherwise we get seemingly
false positives when copying in the user window by simulating a
fill trap on return to usermode. Given that these parity errors can
be avoided by disabling multi issue mode and the problem could be
reproduced with a second machine this appears to be a silicon bug of
some sort.
- Add a membar #Sync also before the stores to ASI_DCACHE_TAG. While
at it, turn of interrupts across the whole cheetah_cache_flush() for
simplicity instead of around every flush. This should have next to no
impact as for cheetah-class machines we typically only need to flush
the caches a few times during boot when recovering from peeking/poking
non-existent PCI devices, if at all.
- Just use KERNBASE for FLUSH as we also do elsewhere as the US-IV+
documentation doesn't seem to mention that these CPUs also ignore the
address like previous cheetah-class CPUs do. Again the code changing
LSU_IC is executed seldom enough that the negligible optimization of
using %g0 instead should have no real impact.
With these changes FreeBSD runs stable on V890 equipped with US-IV+
and -j128 buildworlds in a loop for days are no problem. Unfortunately,
the performance isn't were it should be as a buildworld on a 4x1.5GHz
US-IV+ V890 takes nearly 3h while on a V440 with (theoretically) less
powerfull 4x1.5GHz US-IIIi it takes just over 1h. It's unclear whether
this is related to the supposed silicon bug mentioned above or due to
another issue. The documentation (which contains a sever bug in the
description of the bits added to the context registers though) at least
doesn't mention any requirements for changes in the CPU handling besides
those implemented and the cache as well as the TLB configurations and
handling look fine.
o Re-arrange cheetah_init() so it's easier to add support for SPARC64
V up to VIIIfx CPUs, which only require parts of this initialization.
by UltraSparc-IV and -IV+ as well as SPARC64 V, VI, VII and VIIIfx CPUs.
- Replace TLB_PCXR_PGSZ_MASK and TLB_SCXR_PGSZ_MASK with TLB_CXR_PGSZ_MASK
which just is the complement of TLB_CXR_CTX_MASK instead of trying to
assemble it from the page size bits which vary across CPUs.
- Add macros for the remainder of the SFSR bits, which are useful for at
least debugging purposes.
- Don't leak slice resources when mxge_alloc_rings() fails
- Start taskq threads only after we know attach will succeed. At
boot time, taskqueue_terminate() will loop infinately, waiting
for the threads to exit, and hang the system.
Submitted by: Panasas
MFC After: 3 days
provides no ino-bitmap properties so forge them using the default set
of controller interrupts and let schizo_setup_intr() take care of the
children, hoping for non-fancy routing.
- Add quirk handling for Sun Fire V890. When booting these machines from
disk a Schizo comes up with PCI error residing which triggers as soon
as we register schizo_pci_bus() even when clearing it from all involved
registers (it's no longer indicated once we're in schizo_pci_bus()
though). Thus make PCI bus errors non-fatal until we actually touch the
bus. With this change schizo_pci_bus() typically triggers once during
attach in this case. Obviously this approach isn't exactly race free
but it's about the best we can do about this problem as we're not
guaranteed that the interrupt will actually trigger on V890 either, as
it certainly doesn't when for example netbooting them.
Untangle some of the confusion about what role means when it's in the FCPARAM/SDPARAM
or isp_fc/isp_spi structures. This fixed a problem about seeing targets appear if you've
turned off autologin and find them, or rather don't, via camcontrol rescan.
MFC after: 1 month
o Introduce XIV, eXternal Interrupt Vector, to differentiate from
the interrupts vectors that are offsets in the IVT (Interrupt
Vector Table). There's a vector for external interrupts, which
are based on the XIVs.
o Keep track of allocated and reserved XIVs so that we can assign
XIVs without hardcoding anything. When XIVs are allocated, an
interrupt handler and a class is specified for the XIV. Classes
are:
1. architecture-defined: XIV 15 is returned when no external
interrupt are pending,
2. platform-defined: SAL reports which XIV is used to wakeup
an AP (typically 0xFF, but it's 0x12 for the Altix 350).
3. inter-processor interrupts: allocated for SMP support and
non-redirectable.
4. device interrupts (i.e. IRQs): allocated when devices are
discovered and are redirectable.
o Rewrite the central interrupt handler to call the per-XIV
interrupt handler and rename it to ia64_handle_intr(). Move
the per-XIV handler implementation to the file where we have
the XIV allocation/reservation. Clock interrupt handling is
moved to clock.c. IPI handling is moved to mp_machdep.c.
o Drop support for the Intel 8259A because it was broken. When
XIV 0 is received, the CPU should initiate an INTA cycle to
obtain the interrupt vector of the 8259-based interrupt. In
these cases the interrupt controller we should be talking to
WRT to masking on signalling EOI is the 8259 and not the I/O
SAPIC. This requires adriver for the Intel 8259A which isn't
available for ia64. Thus stop pretending to support ExtINTs
and instead panic() so that if we come across hardware that
has an Intel 8259A, so have something real to work with.
o With XIVs for IPIs dynamically allocatedi and also based on
priority, define the IPI_* symbols as variables rather than
constants. The variable holds the XIV allocated for the IPI.
o IPI_STOP_HARD delivers a NMI if possible. Otherwise the XIV
assigned to IPI_STOP is delivered.
and 16 for metadata
- export L2ARC tunables as sysctls
- add several kstats to track L2ARC state more precisely
- avoid holding a contended lock when atomically incrementing a
contended counter (no lock protection needed for atomics)
in r1.48. We were stopping at the first null pointer when multiple file
descriptors were opened and one in the middle was closed. This restores
traditional behaviour of fdescfs.
MFC after: 3 days
if the interface has such capability. The interface
capability flag indicates whether such capability
exists. This approach is much more backward compatible.
Physical device driver changes will be part of another
commit.
Also updated the ifconfig utility to show the LINKSTATE
capability if present.
Reviewed by: rwatson, imp, juli
MFC after: 3 days
for parsing model-specific and other fields in machine check events
including the global machine check capabilities and status registers,
CPU identification, and the FreeBSD CPU ID.
- Report these added fields in the console log of a machine check so that
a record structure can be reconstituted from the console messages.
- Parse new architectural errors including memory controller errors.
MFC after: 1 week
dscp as a search key in table lookups;
+ (re)implement a sysctl variable to control the expire frequency of
pipes and queues when they become empty;
+ add 'queue number' as optional part of the flow_id. This can be
enabled with the command
queue X config mask queue ...
and makes it possible to support priority-based schedulers, where
packets should be grouped according to the priority and not some
fields in the 5-tuple.
This is implemented as follows:
- redefine a field in the ipfw_flow_id (in sys/netinet/ip_fw.h) but
without changing the size or shape of the structure, so there are
no ABI changes. On passing, also document how other fields are
used, and remove some useless assignments in ip_fw2.c
- implement small changes in the userland code to set/read the field;
- revise the functions in ip_dummynet.c to manipulate masks so they
also handle the additional field;
There are no ABI changes in this commit.
a long time and has gone unnoticed just as long, because I kept
using sched_4bsd (due to sched_ule not working with preemption),
but GENERIC had sched_ule by default -- including SMP.
While here, remove unused inclusion of <machine/clock.h>, remove
totally bogus inclusion of <i386/include/specialreg.h>.
access, and reflects this by autonomously writing LPTE_M into PTE entries.
As such, we should not panic if LPTE_M changes by itself. While here,
fix a harmless typo in moea64_sync_icache().
configuration space on Yukon Ultra(88E8056) such that accesses to
these registers were NOPs which in turn make msk(4) instable on
this controller. Use indirect access method to access
PCI_OUR_REG_[1-5] registers. This should fix a long standing
instability bug which prevented msk(4) working on Yukon Ultra.
Special thanks to koitsu who gave me remote access to his system.
PR: kern/114631, kern/116853
MFC after: 1 week
arcconf tool by Adaptec already seems to use for identifying the
Serial Number of the devices.
Some simple things (like FIB setup and bound checks) are retrieved
from the Adaptec's driver, but this implementation is quite different
because it does use the normal buffer dmat area for loading segments
and not a special one (like the Adaptec's one does).
Sponsored by: Sandvine Incorporated
Discussed with: emaste, scottl
Reviewed by: emaste, scottl
MFC: 2 weeks
their calling contexts in {IP divert, raw IP sockets, TCP, UDP} and
create new helper functions: in_pcbinfo_init() and in_pcbinfo_destroy()
to do this work in a central spot. As inpcbinfo becomes more complex
due to ongoing work to add connection groups, this will reduce code
duplication.
MFC after: 1 month
Reviewed by: bz
Sponsored by: Juniper Networks
COMPAT_43TTY enables the sgtty interface. Even though its exposure has
only been removed in FreeBSD 8.0, it wasn't used by anything in the base
system in FreeBSD 5.x (possibly even 4.x?). On those releases, if your
ports/packages are less than two years old, they will prefer termios
over sgtty.
pointer, rather than octeon_fpa_alloc.
o) Report half duplex status properly.
o) Do not unconditionally update the last known link status in the softc. If
report_link isn't set, when octeon_rgmx_config_speed is called the first
time it will tell the driver (essentially) that we have already marked the
interface up. Likewise, don't change media speed and duplex if only the
link status is at issue. [1]
o) Remove manual changing of link state and let octeon_rgmx_config_speed do the
heavy lifting. [1]
Reviewed by: [1] imp
Sponsored by: Packet Forensics
have the delayed function take an argument as to the offset
to the SCTP header. This allows it to work for V4 and V6.
This of course means changing all callers of the function
to either pass the header len, if they have it, or create
it (ip_hl << 2 or sizeof(ip6_hdr)).
PR: 144529
MFC after: 2 weeks
- Add a missing callout_drain(9) before the descriptor deallocation.[1]
- Prefer callout_init_mtx(9) over callout_init(9) and let the callout
subsystem handle the mutex for callout function.
PR: kern/144453
Submitted by: Alexander Sack (asack at niksun dot com)[1]
MFC after: 1 week
Yukon FE and Yukon Ultra2. These controllers provide very simple
checksum computation mechanism and it requires additional pseudo
header checksum computation in upper stack. Even though I couldn't
see much performance difference with/without Rx checksum offloading
it may help notebook based controllers.
Actually controller can compute two checksum value by giving
different starting position of checksum computation on received
frame. However, for long time, Marvell's checksum offloading engine
have been known to have several silicon bugs so don't blindly trust
computed partial checksum value. Instead, compute partial checksum
twice by giving the same checksum computation position and compare
the result. If the value is different it's clear indication of
hardware bug. This configuration lose IP checksum offloading
capability but I think it's better to take safe route.
Note, Rx checksum offloading for Yukon XL was still disabled due to
known silicon bug.
index of status block is read first before acknowledging the
interrupts. Otherwise bge(4) may get stale status block as
acknowledging an interrupt may yield another status block update.
Reviewed by: marius
starting from netgraph import in 1999.
netstat(8) used pointer to node as node address, oops. That didn't
work, we need the node ID in brackets to successfully address a node.
We can't look into ng_node, due to inability to include netgraph/netgraph.h
in userland code. So let the node make a hint for a userland, storing
the node ID in its private data.
MFC after: 2 weeks
address as well as the transport protocol port information
from the outbound packets. The routing code is generic and
compares every byte in the given sockaddr object. Therefore
the temporary sockaddr objects must be cleared due to padding
bytes. In addition, the port information must be stripped
or the route search will either fail or return the incorrect
route entry.
Unit testing is done using OpenVPN over the if_tun interface.
MFC after: 7 days
no delayed checksum was added to the ip6 output code. This
causes cards that do not support SCTP checksum offload to
have SCTP packets that are IPv6 NOT have the sctp checksum
performed. Thus you could not communicate with a peer. This
adds the missing bits to make the checksum happen for these cards.
PR: 144529
MFC after: 2 weeks
- add a name argument to flowtable_alloc for printing with ddb commands
- extend ddb commands to print destination address or 4-tuples
- don't parse ports in ulp header if FL_HASH_ALL is not passed
- add kern_flowtable_insert to enable more generic use of flowtable
(e.g. system calls for adding entries)
- don't hash loopback addresses
- cleanup whitespace
- keep statistics per-cpu for per-cpu flowtables to avoid cache line contention
- add sysctls to accumulate stats and report aggregate
MFC after: 7 days
o) Properly configure the CAM to handle IFF_PROMISC and note where IFF_ALLMULTI
handling would go if we didn't already force the NIC to receive all
multicast traffic.
Reviewed by: imp
Sponsored by: Packet Forensics
o) Inline octeon_rgmx_mark_ready into octeon_rgmx_init.
o) Add a media status handler that reports link and media status.
o) Set link state when if_init is called.
o) Remove some printfs related to driver state changes.
o) Remove some gratuitous comments.
Reviewed by: imp
Sponsored by: Packet Forensics
is issued at the beginning of the initial IN/OUT data transfers. Reason
unknown, probably firmware fault. Now the stall is only cleared on data
transfer errors.
PR: usb/144199
Submitted by: Hans Petter Selasky
other modules can generate USB descriptors.
- extend the vendor specific request function by one length pointer argument,
because not all descriptors store the length in the first byte. For example
HID descriptors.
Submitted by: Hans Petter Selasky
1) vm_machdep.c: remove the dangling allocations so they do not
un-necessarily turn off the cache upon consecutive access.
2) busdma_machdep.c: remove the same amount than shadow mapped.
Reported by: Maks Verver
Submitted by: Mark Tinguely
Reviewed by: Grzegorz Bernacki
MFC after: 3 days
does not set or update the if_link_state variable.
As such RT_LINK_IS_UP() fails for the if_tap interface.
Also, the RT_LINK_IS_UP() needs to bypass all loopback
interfaces because loopback interfaces are considered
up logically as long as the system is running.
This patch fixes the above issues by setting and updating
the if_link_state variable when the tap interface is
opened or closed respectively. Similary approach is
already done in the if_tun device.
MFC after: 3 days
for upcoming 64-bit PowerPC and MIPS support. This renames the COMPAT_IA32
option to COMPAT_FREEBSD32, removes some IA32-specific code from MI parts
of the kernel and enhances the freebsd32 compatibility code to support
big-endian platforms.
Reviewed by: kib, jhb
given the advent of the extended family and extended model fields. The
values are printed in hex to match their common usage in documentation.
Submitted by: Alexander Best
MFC after: 1 week
- so_pcb is now guaranteed to be non-NULL and valid if a valid socket
reference is held.
- Need to check INP_TIMEWAIT and INP_DROPPED before assuming inp_ppcb is a
tcpcb, as it might be a tcptw or NULL otherwise.
- tp can never be NULL by the end of the function, so only check
TCPS_ESTABLISHED before extracting tcpcb fields.
The NFS server arguably incorporates too many assumptions about TCP
internals, but fixing that is left for nother day.
MFC after: 1 week
Reviewed by: bz
Reviewed and tested by: rmacklem
Sponsored by: Juniper Networks
Also disable relaxed ordering as recommended by data sheet for
PCI-X devices. For PCI-X BCM5704, set maximum outstanding split
transactions to 0 as indicated by data sheet.
For BCM5703 in PCI-X mode, DMA read watermark should be less than
or equal to maximum read byte count configuration. Enforce this
limitation in DMA read watermark configuration.
chip revision often found in the blades and resulting in interfaces
not sensing carrier signal. Looking at all problem reports it
appears that it only affects some very specific silicon revision
(ASIC (0x57081021); Rev (B2)) and version of the PHY that
supports 1000baseSX-FDX media only. Therefore, narrow the scope of
workaround to combination of that revision and media type. Given
that the first report on this issue is dated back to 2007, there is
not much hope that this issue will ever be properly resolved.
Among affected systems are IBM HS21, Intel SBXD132 and HP BL460c.
PR: 118238, 122551, 140970
MFC after: 1 month
These header files only provide functionality that can be used in
combination with libcompat. In order to prevent people from including
them without any actual use (which happens a lot with <sys/timeb.h>),
put a warning here to make people more aware.
This means we have to lower WARNS for libcompat, which is no big deal.
are referenced directly from ivar pointer. It's to do like what other
buses do. [1]
o changes exported prototypes. It doesn't use struct siba_* structures
anymore that instead of it it uses only device_t.
o removes duplicate code and debug messages.
o style(9)
Pointed out by: imp [1]
Setting the new sysctl MIB "debug.acpi.enable_debug_objects" to a non-zero
value enables us to print Debug object when something is written to it.
- Allow users to disable interpreter slack mode. Setting the new tunable
"debug.acpi.interpreter_slack" to zero disables some workarounds for common
BIOS mistakes and enables strict ACPI implementations by the specification.
processors. With this workaround, superpage promotion can be re-enabled
under virtualization. Moreover, machine check exceptions can safely be
enabled when FreeBSD is running natively on Family 10h processors.
Most of the credit should go to Andriy Gapon for diagnosing the error and
working with Borislav Petkov at AMD to document it. Andriy also reviewed
and tested my patches.
Discussed with: jhb
MFC after: 3 weeks
counting in incrementing the interrupt nesting level. This fixes a number
of bugs in which the interrupt thread could be preempted by an IPI,
indefinitely delaying acknowledgement of the interrupt to the PIC, causing
interrupt starvation and hangs.
Reported by: linimon
Reviewed by: marcel, jhb
MFC after: 1 week
allow for connection load balancing across interfaces. Currently
the address alias handling method is colliding with the ECMP code.
For example, when two interfaces are configured on the same prefix,
only one prefix route is installed. So connection load balancing
among the available interfaces is not possible.
The other advantage of ECMP is for failover. The issue with the
current code, is that the interface link-state is not reflected
in the route entry. For example, if there are two interfaces on
the same prefix, the cable on one interface is unplugged, new and
existing connections should switch over to the other interface.
This is not done today and packets go into a black hole.
Also, there is a small bug in the kernel where deleting ECMP routes
in the userland will always return an error even though the command
is successfully executed.
MFC after: 5 days
pmc_flush_logfile is now non-blocking and just ask the kernel
to shutdown the file. From that point, no more data is
accepted by the log thread and when the last buffer is flushed
the file is closed.
This will remove a deadlock between pmcstat asking for
flush while it cannot flush the pipe itself.
MFC after: 3 days
