Commit Graph

20 Commits

Author SHA1 Message Date
Marius Strobl
efd4fc3fb3 o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
support in mii(4):
  - Merge generic flow control advertisement (which can be enabled by
    passing by MIIF_DOPAUSE to mii_attach(9)) and parsing support from
    NetBSD into mii_physubr.c and ukphy_subr.c. Unlike as in NetBSD,
    IFM_FLOW isn't implemented as a global option via the "don't care
    mask" but instead as a media specific option this. This has the
    following advantages:
    o allows flow control advertisement with autonegotiation to be
      turned on and off via ifconfig(8) with the default typically
      being off (though MIIF_FORCEPAUSE has been added causing flow
      control to be always advertised, allowing to easily MFC this
      changes for drivers that previously used home-grown support for
      flow control that behaved that way without breaking POLA)
    o allows to deal with PHY drivers where flow control advertisement
      with manual selection doesn't work or at least isn't implemented,
      like it's the case with brgphy(4), e1000phy(4) and ip1000phy(4),
      by setting MIIF_NOMANPAUSE
    o the available combinations of media options are readily available
      from the `ifconfig -m` output
  - Add IFM_FLOW to IFM_SHARED_OPTION_DESCRIPTIONS and IFM_ETH_RXPAUSE
    and IFM_ETH_TXPAUSE to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so
    these are understood by ifconfig(8).
o Make the master/slave support in mii(4) actually usable:
  - Change IFM_ETH_MASTER from being implemented as a global option via
    the "don't care mask" to a media specific one as it actually is only
    applicable to IFM_1000_T to date.
  - Let mii_phy_setmedia() set GTCR_MAN_MS in IFM_1000_T slave mode to
    actually configure manually selected slave mode (like we also do in
    the PHY specific implementations).
  - Add IFM_ETH_MASTER to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so it
    is understood by ifconfig(8).
o Switch bge(4), bce(4), msk(4), nfe(4) and stge(4) along with brgphy(4),
  e1000phy(4) and ip1000phy(4) to use the generic flow control support
  instead of home-grown solutions via IFM_FLAGs. This includes changing
  these PHY drivers and smcphy(4) to no longer unconditionally advertise
  support for flow control but only if the selected media has IFM_FLOW
  set (or MIIF_FORCEPAUSE is set) and implemented for these media variants,
  i.e. typically only for copper.
o Switch brgphy(4), ciphy(4), e1000phy(4) and ip1000phy(4) to report and
  set IFM_1000_T master mode via IFM_ETH_MASTER instead of via IFF_LINK0
  and some IFM_FLAGn.
o Switch brgphy(4) to add at least the the supported copper media based on
  the contents of the BMSR via mii_phy_add_media() instead of hardcoding
  them. The latter approach seems to have developed historically, besides
  causing unnecessary code duplication it was also undesirable because
  brgphy_mii_phy_auto() already based the capability advertisement on the
  contents of the BMSR though.
o Let brgphy(4) set IFM_1000_T master mode on all supported PHY and not
  just BCM5701. Apparently this was a misinterpretation of a workaround
  in the Linux tg3 driver; BCM5701 seem to require RGPHY_1000CTL_MSE and
  BRGPHY_1000CTL_MSC to be set when configuring autonegotiation but
  this doesn't mean we can't set these as well on other PHYs for manual
  media selection.
o Let ukphy_status() report IFM_1000_T master mode via IFM_ETH_MASTER so
  IFM_1000_T master mode support now is generally available with all PHY
  drivers.
o Don't let e1000phy(4) set master/slave bits for IFM_1000_SX as it's
  not applicable there.

Reviewed by:	yongari (plus additional testing)
Obtained from:	NetBSD (partially), OpenBSD (partially)
MFC after:	2 weeks
2010-11-14 13:26:10 +00:00
Marius Strobl
8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
Pyun YongHyeon
4a4dd474db Fix build breakage introduced in r212972. 2010-09-22 16:48:24 +00:00
Pyun YongHyeon
fc05868abd Remove unnecessary controller reinitialization.
PR:	kern/87506
2010-09-21 17:52:32 +00:00
Joel Dahl
eac073cde2 The NetBSD Foundation has granted permission to remove clause 3 and 4 from
their software.

Obtained from:	NetBSD
2010-03-01 16:52:11 +00:00
John Baldwin
e1b17582f4 Take a step towards removing if_watchdog/if_timer. Don't explicitly set
if_watchdog/if_timer to NULL/0 when initializing an ifnet.  if_alloc()
sets those members to NULL/0 already.
2009-11-06 14:55:01 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Attilio Rao
1abcdbd127 When user_frac in the polling subsystem is low it is going to busy the
CPU for too long period than necessary.  Additively, interfaces are kept
polled (in the tick) even if no more packets are available.
In order to avoid such situations a new generic mechanism can be
implemented in proactive way, keeping track of the time spent on any
packet and fragmenting the time for any tick, stopping the processing
as soon as possible.

In order to implement such mechanism, the polling handler needs to
change, returning the number of packets processed.
While the intended logic is not part of this patch, the polling KPI is
broken by this commit, adding an int return value and the new flag
IFCAP_POLLING_NOCOUNT (which will signal that the return value is
meaningless for the installed handler and checking should be skipped).

Bump __FreeBSD_version in order to signal such situation.

Reviewed by:	emaste
Sponsored by:	Sandvine Incorporated
2009-05-30 15:14:44 +00:00
Pyun YongHyeon
7eb12306d6 Use m_collapse(9) to collapse mbuf chains instead of relying on
shortest possible chain of mbufs of m_defrag(9). What we want is
chains of mbufs that can be safely stored to a Tx descriptor which
can have up to STGE_MAXTXSEGS mbufs. The ethernet controller does
not need to align Tx buffers on 32bit boundary. So the use of
m_defrag(9) was waste of time.
2008-01-18 08:32:08 +00:00
Pyun YongHyeon
346de09f2a Implement WOL capability.
- Turn on WOL bits in suspend/shutdown method.
 - WOL is disabled in resume routine as WOL can interfere normal
   Rx operation.
 - Move stge_reset() to stge_init_locked() as resetting hardware
   clears configured Rx information which in turn results in
   non-working Rx module after suspend/shutdown operation.
2008-01-14 07:16:48 +00:00
Pyun YongHyeon
6a087a8722 Fix function prototype for device_shutdown method. 2007-11-22 02:45:00 +00:00
Pyun YongHyeon
787b3ade61 If we've got watchdog timeouts try to get more packets going after
resetting the hardware.
2007-05-01 03:40:57 +00:00
Pyun YongHyeon
7ef4ec5d34 Honor link up/down state in stge_start().
While I'm here move MAC control settings to stge_link_task, a task
queue which handles link state and duplex/flow controls.
2007-05-01 03:35:48 +00:00
Pyun YongHyeon
eb7a67da1a Use our own timer for watchdog instead of if_watchdog/if_timer
interface.
2007-05-01 03:15:04 +00:00
Christian S.J. Peron
59a0d28bac Catch up the rest of the drivers with the ether_vlan_mtap modifications.
If these drivers are setting M_VLANTAG because they are stripping the
layer 2 802.1Q headers, then they need to be re-inserting them so any
bpf(4) peers can properly decode them.

It should be noted that this is compiled tested only.

MFC after:	3 weeks
2007-03-04 03:38:08 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Marius Strobl
c2175ff5ca Change the remainder of the drivers for DMA'ing devices enabled in the
sparc64 GENERIC and the sound device drivers known working on sparc64
to use bus_get_dma_tag() to obtain the parent DMA tag so we can get rid
of the sparc64_root_dma_tag kludge eventually. Except for ath(4), sk(4),
stge(4) and ti(4) these changes are runtime tested (unless I booted up
the wrong kernels again...).
2007-01-21 19:32:51 +00:00
Andre Oppermann
78ba57b9e1 Move ethernet VLAN tags from mtags to its own mbuf packet header field
m_pkthdr.ether_vlan.  The presence of the M_VLANTAG flag on the mbuf
signifies the presence and validity of its content.

Drivers that support hardware VLAN tag stripping fill in the received
VLAN tag (containing both vlan and priority information) into the
ether_vtag mbuf packet header field:

	m->m_pkthdr.ether_vtag = vlan_id;	/* ntohs()? */
	m->m_flags |= M_VLANTAG;

to mark the packet m with the specified VLAN tag.

On output the driver should check the mbuf for the M_VLANTAG flag to
see if a VLAN tag is present and valid:

	if (m->m_flags & M_VLANTAG) {
		... = m->m_pkthdr.ether_vtag;	/* htons()? */
		... pass tag to hardware ...
	}

VLAN tags are stored in host byte order.  Byte swapping may be necessary.

(Note: This driver conversion was mechanic and did not add or remove any
byte swapping in the drivers.)

Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition.  No more tag
memory allocation have to be done.

Reviewed by:	thompsa, yar
Sponsored by:	TCP/IP Optimization Fundraise 2005
2006-09-17 13:33:30 +00:00
Pyun YongHyeon
ff9c95a4d0 Fix invalid reference of mbuf chains.
Use proper pointer dereference to inform modified mbuf chains to
caller.

In collaboration with:	glebius
2006-08-12 01:24:37 +00:00
Pyun YongHyeon
5780825180 Add stge(4), a driver for Sundance/Tamarack TC9021 Gigabit Ethernet
controller ported from NetBSD. It supports the following Gigabit
Ethernet adapters.
o Antares Microsystems Gigabit Ethernet
o ASUS NX1101 Gigabit Ethernet
o D-Link DL-4000 Gigabit Ethernet
o IC Plus IP1000A Gigabit Ethernet
o Sundance ST-2021 Gigabit Ethernet
o Sundance ST-2023 Gigabit Ethernet
o Sundance TC9021 Gigabit Ethernet
o Tamarack TC9021 Gigabit Ethernet
The IP1000A Gigabit Ethernet is also found on some motherboards
(LOM) from ABIT.

Unlike NetBSD stge(4) it does not require promiscuous mode operation
to revice packet and it supports all hardware features(TCP/UDP/IP
checksum offload, VLAN tag stripping/insertion features and JUMBO
frame) and polling(4).
Due to lack of hardware, hardwares that have TBI trantransceivers
were not tested at all.

Special thanks to wpaul who provided valauble datasheet for the
controller and helped to debug jumbo frame related issues. Whitout
his datasheet I would have spent many hours to debug this chip.

Tested on:	i386, sparc64
2006-07-25 00:37:09 +00:00