When malloc fails. don't try to memset NULL pointer, it cause core dump
Replace malloc+memset with calloc, theoretically it can do some
optimization of zeroing process internally
Improve error diagnostic
"+=" originally because (as I understand) Jordan used a sed script (or
was it perl?) to edit all the ports Makefiles automatically and he
wanted to make sure multiple CATEGORIES lines (they were inserted
after DISTNAME or something, there shouldn't have been multiple of
them to begin with but that's another story) won't be stepping on each
other's toes.
Reminded by: obrien
uses one or the other. This required some changes to the ahc_reset()
function, and how early the probes had to allocate their softc.
Turn the AHC_IN/OUT* macros into inline functions and lowercase their names
to indicate this change. Geting AHC_OUTSB to work as a macro doing
conditional memory mapped I/O would have been too gross.
Be smart about the STPWEN control bit in SCFRCTL1. It should only be set
if the low byte of the bus is to be terminated. We figure this out either
by "caching" the value left over from the BIOS setup before we reset the card
or by using the values stored in the seeprom if it is availible.
uses one or the other. This required some changes to the ahc_reset()
function, and how early the probes had to allocate their softc.
Turn the AHC_IN/OUT* macros into inline functions and lowercase their names
to indicate this change. Geting AHC_OUTSB to work as a macro doing
conditional memory mapped I/O would have been too gross.
Stop setting STPWEN in the main driver and let the PCI front end do it
instead. It knows better.
Add the clearing of the QOUTQCNT variable during command complete processing
in the SCB paging case.
Go back to doing unconditional retries for the QUEUE FULL status condition.
This is really a kludge, but the code to handle it properly is on the SCSI
branch and will not make it into 2.2.
uses one or the other. This required some changes to the ahc_reset()
function, and how early the probes had to allocate their softc.
Turn the AHC_IN/OUT* macros into inline functions and lowercase their names
to indicate this change. Geting AHC_OUTSB to work as a macro doing
conditional memory mapped I/O would have been too gross.
1) get_free_or_disc_scb was not being passed its argument correctly
in one case
2) Add protection in the form of the QOUTQCNT variable to prevent
overflowing the QOUTFIFO.
This should make SCB Paging work. Really, I mean it now. 8-)
using a sockaddr_dl.
Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR)
to work for multicast UDP and raw sockets as well. (They previously only
worked for unicast UDP).
endian-ness fix, Router Alert options on IGMP messages, and a
new keyword, "advert_metric", for fine-tuning tunnel metrics.
This also includes a new mtrace, which is also unreleased but
builds significantly on the experiences of users' troubles with
using and understanding mtrace in release 3.8 .
(unreleased does not, of course, mean untested!)
This is a candidate for both 2.2 and 2.1.6 .
Submitted by: Archie Cobbs (Archie@whistle.com)
Changes to allow inted to control the number of servers to
start on each service. This is a defence against a denial of service attack
in which the system is made unusable by
an external party. It also allows the behaviour of
small memory systems to be more accuratly predicted, by
bounding the extent to which processes can multiply.
This allows the user to add modify syscons's configuration flags using
UserConfig that will allow older/quirky hardware (most notably older IBM
ThinkPad laptops) to work with the standard boot kernel.
Inspired by: The Nomads
if kerberos is installed. So far as I'm aware, kerberos aware clients
detect ECONNREFUSED and (if allowed) fall back to the non-kerberos
servers. They do not know how to interpret messages such as
"rlogind: unknown option -k".
I believe Garrett also mentioned this.
Unfortunately, this adds an extra step to bringing up kerberos.
It also stops /var/log/messages getting quite so many useless (and
confusing) error messages when somebody does a port scan on you.
dealing w/the fixit floppy.
Also added the MNT_RELOAD, MNT_WANTRDWR, MNT_ASYNC, MNT_NOATIME,
MOUNT_UNION flags. Someone might want to check my description of MNT_RELOAD.
2.2-R candidate. Not a 2.1.6-R candidate -- some current flags aren't in
2.1.5-R's version.
the main menu.
2. Conditionalized a few small things which needed it.
3. Put PC98 X servers in their own menu, there are so many of them now.
4. Rampaged on the menus.c file in general, reformatting and cleaning up.
Not all mappings are supported, most languages come only with one
encoding since this should be sufficient to get up & running in using
sysinstall, and we are already pretty tight on space. (My previous
commit has already bumped the boot MFS size by another 50 KB for
this.)
This feature requires the `kbdcontrol -L' i've just committed. Plain
text keymaps and the entire scanner are overkill for sysinstall.
Also updated the list of available keymaps while i was at it.
Reviewed by: jkh
. Don't gzip the crunched binary by now; it just fits, and execution is
a lot faster this way (it's truly demand-paged again).
. Add more(1), ft(8), protocols(5), a stripped down services(5).
. Improve the .profile, and make sysinstall actually use it again.
Still no go for a 4 MB configuration though. :-(
but make a second attempt using MNT_FORCE, just in case it has been
unclean from a previous crash. That's dangerous, but far better than
keeping the despaired user standing in the rain...
(Experienced admins can still fsck it then, and remount. Others will
either totally crash, or incidentally succeed, without much further
help possible...)
Btw., mount(2) misses the description of MNT_FORCE for the mount
syscall.
directories to a different parent directory always failed. This bug
was caused by 4.4Lite2 changing the directory format and ext2fs not
keeping up.
Should be in 2.2.
