Allwinner USB DRD is based on the Mentor USB OTG controller, with a
different register layout and a few missing registers.
The code is by Andrew Turner (andrew).
Reviewed by: hselasky, manu
Obtained from: andrew
MFC after: 5 weeks
Differential Revision: https://reviews.freebsd.org/D5881
This package is intended to be used with ice(4) version 0.26.16. That
update will happen in a forthcoming commit.
MFC after: 3 days
Sponsored by: Intel Corporation
Make sure that building dev/sdhci/sdhci_fsl_fdt.c has all the right
dependencies until a proper fix can be made.
Sponsored by: Mellanox Technologies // NVIDIA Networking
Implement support for an eSDHC controller found in NXP QorIQ Layerscape SoCs.
This driver has been tested with NXP LS1046A and LX2160A (Honeycomb board),
which is incompatible with the existing sdhci_fsl driver (aiming at older
chips from this family). As such, it is not intended as replacement for
the old driver, but rather serves as an improved alternative for SoCs that
support it.
It comes with support for both PIO and Single DMA modes and samples the
clock from the extres clk API.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: manu, mmel, kibab
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26153
When using relative paths for the linker we have to transform the name
since clang does not like -fuse-ld=ld.lld and instead requires -fuse-ld=lld
(the same also applies for ld.bfd).
I went through the merge and found the rest of the instances where
${MACHINE_ARCH} == "powerpc" was being used to detect 32-bit and adjusted
the rest of the instances to also check for powerpcspe.
mips32* will probably want to do the same.
Sponsored by: Tag1 Consulting, Inc.
This is needed so that setting LD/XLD is not ignored when linking with $CC
instead of directly using $LD. Currently only clang accepts an absolute
path for -fuse-ld= (Clang 12+ will add a new --ld-path flag), so we now
warn when building with GCC and $LD != "ld" since that might result in the
wrong linker being used.
We have been setting XLD=/path/to/cheri/ld.lld in CheriBSD for a long time and
used a similar version of this patch to avoid linking with /usr/bin/ld.
This change is also required when building FreeBSD on an Ubuntu with Clang:
In that case we set XCC=/usr/lib/llvm-10/bin/clang and since
/usr/lib/llvm-10/bin/ does not contain a "ld" binary the build fails with
`clang: error: unable to execute command: Executable "ld" doesn't exist!`
unless we pass -fuse-ld=/usr/lib/llvm-10/bin/ld.lld.
This change passes -fuse-ld instead of copying ${XLD} to WOLRDTMP/bin/ld
since then we would have to ensure that this file does not exist while
building the bootstrap tools. The cross-linker might not be compatible with
the host linker (e.g. when building on macos: host-linker= Mach-O /usr/bin/ld,
cross-linker=LLVM ld.lld).
Reviewed By: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D26055
The most awkward bit in this patch is the bootstrapping of m4:
We can't simply use the host version of m4 since that is not compatible
with the flags passed by lex (at least on macOS, possibly also on Linux).
Therefore we need to bootstrap m4, but lex needs m4 to build and m4 also
depends on lex (which needs m4 to generate any files). To work around this
cyclic dependency we can build a bootstrap version of m4 (with pre-generated
files) then use that to build the real m4.
This patch also changes the xz/unxz/dd tools to always use the host version
since the version in the source tree cannot easily be bootstrapped on macOS
or Linux.
Reviewed By: brooks, imp (earlier version)
Differential Revision: https://reviews.freebsd.org/D25992
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
An internet draft titled "Towards Remote Procedure Call Encryption By Default"
describes how TLS is to be used for Sun RPC, with NFS as an intended use case.
This patch adds client and server support for this to the kernel RPC,
using KERN_TLS and upcalls to daemons for the handshake, peer reset and
other non-application data record cases.
The upcalls to the daemons use three fields to uniquely identify the
TCP connection. They are the time.tv_sec, time.tv_usec of the connection
establshment, plus a 64bit sequence number. The time fields avoid problems
with re-use of the sequence number after a daemon restart.
For the server side, once a Null RPC with AUTH_TLS is received, kernel
reception on the socket is blocked and an upcall to the rpctlssd(8) daemon
is done to perform the TLS handshake. Upon completion, the completion
status of the handshake is stored in xp_tls as flag bits and the reply to
the Null RPC is sent.
For the client, if CLSET_TLS has been set, a new TCP connection will
send the Null RPC with AUTH_TLS to initiate the handshake. The client
kernel RPC code will then block kernel I/O on the socket and do an upcall
to the rpctlscd(8) daemon to perform the handshake.
If the upcall is successful, ct_rcvstate will be maintained to indicate
if/when an upcall is being done.
If non-application data records are received, the code does an upcall to
the appropriate daemon, which will do a SSL_read() of 0 length to handle
the record(s).
When the socket is being shut down, upcalls are done to the daemons, so
that they can perform SSL_shutdown() calls to perform the "peer reset".
The rpctlssd(8) and rpctlscd(8) daemons require a patched version of the
openssl library and, as such, will not be committed to head at this time.
Although the changes done by this patch are fairly numerous, there should
be no semantics change to the kernel RPC at this time.
A future commit to the NFS code will optionally enable use of TLS for NFS.
Allow to dynamically grow the amount of fibs in each vnet.
This change alters current behavior. Currently, if one defines
ROUTETABLES > 1 in the kernel config, each vnet will be created
with the number of fibs defined in the kernel config.
After this commit vnets will be created with fibs=1.
Dynamic net.fibs is not compatible with net.add_addr_allfibs.
The plan is to deprecate the latter and make
net.add_addr_allfibs=0 default behaviour.
Reviewed by: glebius
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26062
It was a driver for a USB FM tuner that was available in the market in 2002. I
wrote the driver in 2003. I've not used it since 2005 or so, so it's time to
retire this driver. No userland code ever interfaced to the special device it
created. There's no user base: the last bug I received on this driver was in
2004.
Relnotes: Yes
Add prng(9) as a replacement for random(9) in the kernel.
There are two major differences from random(9) and random(3):
- General prng(9) APIs (prng32(9), etc) do not guarantee an
implementation or particular sequence; they should not be used for
repeatable simulations.
- However, specific named API families are also exposed (for now: PCG),
and those are expected to be repeatable (when so-guaranteed by the named
algorithm).
Some minor differences from random(3) and earlier random(9):
- PRNG state for the general prng(9) APIs is per-CPU; this eliminates
contention on PRNG state in SMP workloads. Each PCPU generator in an
SMP system produces a unique sequence.
- Better statistical properties than the Park-Miller ("minstd") PRNG
(longer period, uniform distribution in all bits, passes
BigCrush/PractRand analysis).
- Faster than Park-Miller ("minstd") PRNG -- no division is required to
step PCG-family PRNGs.
For now, random(9) becomes a thin shim around prng32(). Eventually I
would like to mechanically switch consumers over to the explicit API.
Reviewed by: kib, markj (previous version both)
Discussed with: markm
Differential Revision: https://reviews.freebsd.org/D25916
These exist on the Raspberry Pi 3 and 4 and control and external IO
expander.
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25858
The newer hardware revisions of the Raspberry Pi 4 removed the ability of
the VIA VL805 xhci controller to load its own firmware. Instead the
firmware must be installed at the appropriate time by the VideoCore
coprocessor.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25261
Provide missing rules for ena_datapath.c and ena_netmap.c,
which prevented the ENA driver from building.
This issue was showing up only when building the driver statically
into the kernel.
PR: 248116
Submitted by: Artur Rojek <ar@semihalf.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25796
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
APEI allows platform to report different kinds of errors to OS in several
ways. We've found that Supermicro X10/X11 motherboards report PCIe errors
appearing on hot-unplug via this interface using NMI. Without respective
driver it ended up in kernel panic without any additional information.
This driver introduces support for the APEI Generic Hardware Error Source
reporting via NMI, SCI or polling. It decodes the reported errors and
either pass them to pci(4) for processing or just logs otherwise. Errors
marked as fatal still end up in kernel panic, but some more informative.
When somebody get to native PCIe AER support implementation both of the
reporting mechanisms should get common error recovery code. Since in our
case errors happen when the device is already gone, there is nothing to
recover, so the code just clears the error statuses, practically ignoring
the otherwise destructive NMIs in nicer way.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
QEMU's RISC-V virt machine provides syscon-power and syscon-reset
devices as the means by which to shutdown and reboot. We also need to
ensure that we have attached the syscon_generic device before attaching
any syscon_power devices, and so we introduce a new riscv_syscon device
akin to aw_syscon added in r327936. Currently the SiFive test finisher
is used as the specific implementation of such a syscon device.
Reviewed by: br, brooks (mentor), jhb (mentor)
Approved by: br, brooks (mentor), jhb (mentor)
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D25725
This device was originally used as part of the goldfish virtual hardware
platform used for emulating Android on QEMU, but is now also used as the
RTC for the RISC-V virt machine in QEMU. It provides a simple 64-bit
nanosecond timer exposed via a pair of memory-mapped 32-bit registers,
although only with 1s granularity.
Reviewed by: brooks (mentor), jhb (mentor), kp
Approved by: brooks (mentor), jhb (mentor), kp
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D25717
The EIP-97 is a packet processing module found on the ESPRESSObin. This
commit adds a crypto(9) driver for the crypto and hash engine in this
device. An initial skeleton driver that could attach and submit
requests was written by loos and others at Netgate, and the driver was
finished by me.
Support for separate AAD and output buffers will be added in a separate
commit, to simplify merging to stable/12 (where those features don't
exist).
Reviewed by: gnn, jhb
Feedback from: andrew, cem, manu
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25417
Communicating with the Raspberry Pi firmware is currently handled by each
driver calling into the mbox driver, however the device tree is structured
such that they should be calling into a firmware driver.
Add a driver for this node with an interface to communicate to the firmware
via the mbox interface.
There is a sysctl to get the firmware revision. This is a unix date so can
be parsed with:
root@generic:~ # date -j -f '%s' sysctl -n dev.bcm2835_firmware.0.revision
Tue Nov 19 16:40:28 UTC 2019
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25572
This adds support for the Broadcom bcm2711 PCI express controller, found
on the Raspberry Pi 4 (aka the bcm2838 SoC). The driver has only been
developed against the soldered-on VIA XHCI controller and not tested
with other end points.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25068
Take advantage of Warner's nice new real GEOM aliasing system and use it for
aliased partition names that actually work.
Our canonical EBR partition name is the weird, not-default-on-x86-prior-to-
this-revision "da1p4+00001234." However, if compatibility mode (tunable
kern.geom.part.ebr.compat_aliases) is enabled (1, default), we continue to
provide the alias names like "da1p5" in addition to the weird canonical
names.
Naming partition providers was just one aspect of the COMPAT knob; in
addition it limited mutability, in part because it did not preserve existing
EBR header content aside from that of LBA 0. This change saves the EBR
header for LBA 0, as well as for every EBR partition encountered. That way,
when we write out the EBR partition table on modification, we can restore
any bootloader or other metadata in both LBA0 (the first data-containing EBR
may start after 0) as well as every logical EBR we read from the disk, and
only update the geometry metadata and linked list pointers that describe the
actual partitioning.
(This change does not add support for the 'bootcode' verb to EBR.)
PR: 232463
Reported by: Manish Jain <bourne.identity AT hotmail.com>
Discussed with: ae (no objection)
Relnotes: maybe
Differential Revision: https://reviews.freebsd.org/D24939
- Add CCM driver and clocks implementations for i.MX 8M
- Add GPC driver for iMX8
- Add clock tree for i.MX 8M Quad
- Add clocks support and new compat strings (where required) for existing i.MX 6 UART, I2C, and GPIO drivers
- Enable aarch64-compatible drivers form i.MX 6 in arm64 GENERIC kernel config
- Add dtb/imx8 kernel module with DTBs for Nitrogen8M and iMX8MQ EVK
With this patch both Nitrogen8M and iMX8MQ EVK boot with NFS root up to multiuser login prompt
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D25274
Create an acpi attachment for the DWC USB OTG device. This is present in
the Raspberry Pi 4 in the USB-C port normally used to power the board. Some
firmware presents the kernel with ACPI tables rather than FDT so we need
an ACPI attachment.
Submitted by: Greg V <greg_unrelenting.technology>
Approved by: hselasky (removal of All rights reserved)
Differential Revision: https://reviews.freebsd.org/D25203
Otherwise out-of-tree module builds will be broken for a lack of a
definition of MK_SCTP_SUPPORT.
Reported by: Michael Butler <imb@protected-networks.net>
MFC with: r362614
Sponsored by: The FreeBSD Foundation
Ports bsd.kmod.mk explicitly sets MK_KERNEL_SYMBOLS=no to prevent auto-
splitting of debuginfo from kernel modules. If that knob is set, don't
split out a .ko.debug and .ko from .ko.full; just generate a .ko with
debuginfo and leave it be.
Otherwise, with DEBUG_FLAGS set and MK_KERNEL_SYMBOLS=no, we would helpfully
strip out the debuginfo from the .ko.full and then not install it. That is
not the desired result a WITH_DEBUG port kmod build.
Reviewed by: emaste, jhb
Differential Revision: https://reviews.freebsd.org/D24835
This is in preparation for enabling a loadable SCTP stack. Analogous to
IPSEC/IPSEC_SUPPORT, the SCTP_SUPPORT kernel option must be configured
in order to support a loadable SCTP implementation.
Discussed with: tuexen
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
o Parse the ACPI DSD (Device Specific Data) graph property and record
device connections.
o Split-out FDT support to a separate file.
o Get the corresponding (FDT/ACPI) Coresight platform data in
the device drivers.
Sponsored by: DARPA, AFRL