A new terminal_set_cursor() is added: it wraps the existing
teken_set_cursor() function.
In vtbuf_grow(), the cursor position is adjusted at the end of the
function. In vt_change_font(), we call terminal_set_cursor() just after
terminal_set_winsize_blank(), while the terminal is mute.
This fixes a bug where, after loading a kernel video driver which
increases the terminal window size, the cursor remains at its old
position, in other words, in the middle of the display content.
PR: 194421
MFC after: 1 week
Kyua 0.11 points TMPDIR to the test's work directory, and atf_check creates
auxiliary files in TMPDIR. This confuses a couple of mtree tests that were
using the work directory's root to validate the contents of the directory.
Fix the two affected tests by creating an auxiliary directory to use for
the mtree tests. (Kyua should probably do this on its own; filed bug #133
upstream to take a look at this.)
less obsolete information. Also move the entropy command down the list --
the list is ordered by likelihood of use rather than alphabetically.
MFC after: 1 week
EXP_REDIR was not being checked for while expanding positional parameters in
redirection, so CTL* bytes were not being prefixed where they should be.
MFC after: 1 week
do not require additional entropy to function.
It would create a circular dependency (not immediately obvious:
geli provides 'disks' and requires 'random' as of r273872,
'random' requires 'FILESYSTEMS', 'FILESYSTEMS' requires 'root',
'root' requires 'swap', and finally 'swap' requires 'disk').
hold the gpiobus lock between the gpio calls.
gpiobus_acquire_lock() now accepts a third parameter which tells gpiobus
what to do when the bus is already busy.
When GPIOBUS_WAIT wait is used, the calling thread will be put to sleep
until the bus became free.
With GPIOBUS_DONTWAIT the calling thread will receive EWOULDBLOCK right
away and then it can act upon.
This fixes the gpioiic(4) locking issues that arises when doing multiple
concurrent access on the bus.
of fuword(9) and suword(9). This makes the functions type-compatible
with volatile objects and does not require devolatile force, e.g. in
kern_umtx.c.
Requested by: bde
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
The check was recommened in the draft-ietf-ngtrans-mech-05.txt. But it isn't
clear, should it compare the source with all direct broadcast addresses in the
system or not.
RFC 4213 says it is enough to verify that the source address is the address
of the encapsulator, as configured on the decapsulator. And this verification
can be extended by administrator with any other forms of IPv4 ingress filtering.
Discussed with: glebius, melifaro
Sponsored by: Yandex LLC
The problem is that the __LINE__ macro is constant inside a macro and
results in identical assert statements when the compiler does not
support the static builtin assert function.
MFC: 3 days
Sponsored by: Mellanox Technologies
appropriately
Assert FILEDESC_XLOCK_ASSERT only for already used tables in fdgrowtable.
We don't have to call it with the lock held if we are just creating new
filedesc.
As a side note, strictly speaking processes can have fdtables with
fd_lastfile = -1, but then they cannot enter fdgrowtable. Very first file
descriptor they get will be 0 and the only syscall allowing to choose fd number
requires an active file descriptor. Should this ever change, we can add an 'init'
(or similar) parameter to fdgrowtable.
While here add 'fdused_init' which does not perform unnecessary work.
Drop FILEDESC_LOCK_ASSERT from fdisused and rely on callers to hold
it when appropriate. This function is only used with INVARIANTS.
No functional changes intended.
Test for file availability by fde_file != NULL instead of fdisused, this is
consistent with similar checks later.
Drop badfileops check. badfileops don't have DFLAG_PASSABLE set, so it was never
reached in practice.
fdiused is now only used in some KASSERTS, so ifdef it under INVARIANTS.
No functional changes.
bsd.progs.mk generates a separate depend file for every program being
built, but then it does not properly tell each submake to use those
individual files. Properly propagate the depend file to use.
Discovered while preparing the update of atf to 0.21 and noticing that
the test programs were not being relinked to the new library.
This change is "make tinderbox" clean.
This code has had an extensive rewrite and a good series of reviews, both by the author and other parties. This means a lot of code has been simplified. Pluggable structures for high-rate entropy generators are available, and it is most definitely not the case that /dev/random can be driven by only a hardware souce any more. This has been designed out of the device. Hardware sources are stirred into the CSPRNG (Yarrow, Fortuna) like any other entropy source. Pluggable modules may be written by third parties for additional sources.
The harvesting structures and consequently the locking have been simplified. Entropy harvesting is done in a more general way (the documentation for this will follow). There is some GREAT entropy to be had in the UMA allocator, but it is disabled for now as messing with that is likely to annoy many people.
The venerable (but effective) Yarrow algorithm, which is no longer supported by its authors now has an alternative, Fortuna. For now, Yarrow is retained as the default algorithm, but this may be changed using a kernel option. It is intended to make Fortuna the default algorithm for 11.0. Interested parties are encouraged to read ISBN 978-0-470-47424-2 "Cryptography Engineering" By Ferguson, Schneier and Kohno for Fortuna's gory details. Heck, read it anyway.
Many thanks to Arthur Mesh who did early grunt work, and who got caught in the crossfire rather more than he deserved to.
My thanks also to folks who helped me thresh this out on whiteboards and in the odd "Hallway track", or otherwise.
My Nomex pants are on. Let the feedback commence!
Reviewed by: trasz,des(partial),imp(partial?),rwatson(partial?)
Approved by: so(des)
Released on October 23rd, 2014.
* Restored the atf(7) manual page to serve as a reference to all the other
manual pages shipped by ATF.
* Added the -s flag to atf-sh to support specifying the shell interpreter
to be used.
* Removed ATF_WORKDIR. The only remaining consumers have been converted to
use the standard TMPDIR environment variable. As a benefit, and because
Kyua forces the TMPDIR to live within the test case's work directory,
any stale files left behind by ATF will be automatically cleaned up.
* Documented the environment variables recognized by each component in the
relevant manual pages. This information was lost with the atf-config(1)
removal.
* Added a new "require.diskspace" metadata property to test cases so that
they can specify the minimum amount of disk space required for the test
to run.
* Renamed the atf-{c,c++,sh}-api(3) manual pages to atf-{c,c++,sh}(3) for
discoverability purposes. Symbolic links are provided for the time
being to still make the old names visible.
* Issue #5: Recommend the (expected, actual) idiom for calls to the test
macros in the manual pages.
* Issue #7: Stopped catching unhandled exceptions in atf-c++ tests. This
propagates the crash to the caller, which in turn allows it to obtain
proper debugging information. In particular, Kyua should now be able to
extract a stacktrace pinpointing the problem.
* Issue #8: Fixed atf-c/macros_test:use test failures spotted by the clang
that ships with FreeBSD 11.0-CURRENT.
* Issue #12: Improved documentation of atf-sh(3) and atf-check(1) by better
explaining how they relate to each other.
* Issue #14: Stopped setting 'set -e' in atf-sh. This setting was
initially added as a way to enable a "strict" mode in the library and to
make test cases fail fast when they run unprotected commands. However,
doing so in the library is surprising as the responsibility of enabling
'set -e' should be on the user's code. Also, 'set -e' introduces
inconsistent behavior on subshells and users do not expect that.
* Issue #15: Fixed atf_utils_{fork,wait} to support nested calls.
* Issue #16: Fixed test failures (by removing a long-standing hack) on
systems that lack \e support in printf(1).
* Issue #19: Removed stale references to atf-config and atf-run.
- convert boot1.efi to corrrectly calculate the lba for what the
media reports and convert the size based on what FreeBSD uses.
The existing code would use the 512 byte lba and convert the
size using 4K byte size.
- make fsck_msdosfs read the boot block as 4K so the read doesn't
fail on a 4Kn drive since FreeBSD will error out parition reads
of a block. Make the bpbBytesPerSec check a multiple of 512 since
it can be 512 or 4K depending on the disk. This allows fsck to
pass checking the EFI partition on a 4Kn disk.
To create the EFI file system I used:
newfs_msdos -F 32 -S 4096 -c 1 -m 0xf8 <partition>
This works for booting 512 and 4Kn disks.
Caveat is that loader.efi cannot read the 4Kn EFI partition. This isn't
critical right now since boot1.efi will read loader.efi from the ufs
partition. It looks like loader.efi can be fixed via making some of the
512 bytes reads more flexible. loader.efi doesn't have trouble reading
the ufs partition. This is probably a simple fix.
I now have FreeBSD installed on a system with 4Kn drives and tested the
same code works on 512.
MFC after: 1 week
in the radeonkms driver.
Note: In PCI mode virtual addresses on the graphics card that map to system
RAM are translated to physical addresses by the graphics card itself. In
AGP mode address translation is done by the AGP chipset so fictitious
addresses appear on the system bus. For the CPU cache management to work
correctly when the CPU accesses this memory it needs to use the same
fictitious addresses (and let the chipset translate them) instead of using
the physical addresses directly.
Reviewed by: kib
MFC after: 1 month
When multicast capable interface goes away, it leaves multicast groups,
this leads to generate MLD reports, but MLD code does deffered send and
MLD reports are queued in the in6_multi's in6m_scq ifq. The problem is
that in6_multi structures are freed when interface leaves multicast groups
and thread that does deffered send will not take these queued packets.
PR: 194577
MFC after: 1 week
Sponsored by: Yandex LLC
