Commit Graph

218 Commits

Author SHA1 Message Date
John Baldwin
3aa6d94e0c Update several places that iterate over CPUs to use CPU_FOREACH(). 2010-06-11 18:46:34 +00:00
Randall Stewart
4542827d4d This pushes all of JC's patches that I have in place. I
am now able to run 32 cores ok.. but I still will hang
on buildworld with a NFS problem. I suspect I am missing
a patch for the netlogic rge driver.

JC check and see if I am missing anything except your
core-mask changes

Obtained from:	JC
2010-05-16 19:43:48 +00:00
Attilio Rao
de6648745c Fix a hang introduced in r206878 for kernel compiled with SMP support but
being not actual SMP and similar situations by always initializing the
smp ipi mutex.

Reported by:	marius
MFC after:	3 days
X-MFC:		r206878
2010-05-11 15:36:16 +00:00
Konstantin Belousov
51a6ef34fb Remove forward_roundrobin(), it is unused for quite some time.
Reviewed by:	jhb
MFC after:	1 week
2009-09-21 13:09:56 +00:00
Attilio Rao
dc6fbf6545 * Completely Remove the option STOP_NMI from the kernel. This option
has proven to have a good effect when entering KDB by using a NMI,
but it completely violates all the good rules about interrupts
disabled while holding a spinlock in other occasions.  This can be the
cause of deadlocks on events where a normal IPI_STOP is expected.
* Adds an new IPI called IPI_STOP_HARD on all the supported architectures.
This IPI is responsible for sending a stop message among CPUs using a
privileged channel when disponible. In other cases it just does match a
normal IPI_STOP.
Right now the IPI_STOP_HARD functionality uses a NMI on ia32 and amd64
architectures, while on the other has a normal IPI_STOP effect. It is
responsibility of maintainers to eventually implement an hard stop
when necessary and possible.
* Use the new IPI facility in order to implement a new userend SMP kernel
function called stop_cpus_hard(). That is specular to stop_cpu() but
it does use the privileged channel for the stopping facility.
* Let KDB use the newly introduced function stop_cpus_hard() and leave
stop_cpus() for all the other cases
* Disable interrupts on CPU0 when starting the process of APs suspension.
* Style cleanup and comments adding

This patch should fix the reboot/shutdown deadlocks many users are
constantly reporting on mailing lists.

Please don't forget to update your config file with the STOP_NMI
option removal

Reviewed by:	jhb
Tested by:	pho, bz, rink
Approved by:	re (kib)
2009-08-13 17:09:45 +00:00
Jeff Roberson
7b55ab0534 - Remove the bogus idle thread state code. This may have a race in it
and it only optimized out an ipi or mwait in very few cases.
 - Skip the adaptive idle code when running on SMT or HTT cores.  This
   just wastes cpu time that could be used on a busy thread on the same
   core.
 - Rename CG_FLAG_THREAD to CG_FLAG_SMT to be more descriptive.  Re-use
   CG_FLAG_THREAD to mean SMT or HTT.

Sponsored by:   Nokia
2009-04-29 03:15:43 +00:00
Jung-uk Kim
c66d2b38c8 Initial suspend/resume support for amd64.
This code is heavily inspired by Takanori Watanabe's experimental SMP patch
for i386 and large portion was shamelessly cut and pasted from Peter Wemm's
AP boot code.
2009-03-17 00:48:11 +00:00
Dmitry Chagin
b2421c29f6 as suggested by jhb@, panic in case the ncpus == 0.
it helps to catch bugs in the callers.

Approved by:	kib (mentor)
MFC after:	5 days
2009-03-03 17:34:09 +00:00
Dmitry Chagin
6485a22ccb Fix range-check error introduced in r182292. Also do not do anything
if all processors in the map are not available, simply return.

Approved by:	kib (mentor)
MFC after:	1 week
2009-03-01 14:26:24 +00:00
John Baldwin
4e30a2db51 Whitespace tweak. 2009-01-26 15:32:39 +00:00
John Baldwin
4482f952b1 Adjust the license statement to more closely match a standard 3-clause BSD
license.

MFC after:	3 days
2008-11-03 21:17:02 +00:00
John Baldwin
9c2bf0cce2 - Only count the number of CPUs in the rendezvous map once rather than
doing it on every CPU.
- Use CPU_ABSENT() rather than pcpu_find() to determine if a CPU is not
  present.
- Count up to mp_maxid rather than MAXCPU when iterating over CPUs to
  match the rest of the code in the kernel.

MFC after:	1 week
2008-08-27 18:23:55 +00:00
John Birrell
833b4a131a Allow a rendezvous with just a specified CPU too.
Make the API work in the non-smp case too so that a kernel module
can work the same regardless of whether or not it is loaded on a SMP
kernel or not.
2008-05-23 04:05:26 +00:00
Robert Watson
237fdd787b In keeping with style(9)'s recommendations on macros, use a ';'
after each SYSINIT() macro invocation.  This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.

MFC after:	1 month
Discussed with:	imp, rink
2008-03-16 10:58:09 +00:00
Jeff Roberson
1bf6461e98 - Add the missing '2' case to the switch table for kern.smp.topology and
assign it to create the flat 'none' topology where all cpus are scheduled
   as if they are equal and unrelated.
2008-03-10 01:38:53 +00:00
Jeff Roberson
81aa71755b - Remove the old smp cpu topology specification with a new, more flexible
tree structure that encodes the level of cache sharing and other
   properties.
 - Provide several convenience functions for creating one and two level
   cpu trees as well as a default flat topology.  The system now always
   has some topology.
 - On i386 and amd64 create a seperate level in the hierarchy for HTT
   and multi-core cpus.  This will allow the scheduler to intelligently
   load balance non-uniform cores.  Presently we don't detect what level
   of the cache hierarchy is shared at each level in the topology.
 - Add a mechanism for testing common topologies that have more information
   than the MD code is able to provide via the kern.smp.topology tunable.
   This should be considered a debugging tool only and not a stable api.

Sponsored by:	Nokia
2008-03-02 07:58:42 +00:00
John Baldwin
c0cfd9d113 A few whitespace fixes. 2008-01-02 17:09:15 +00:00
Stephan Uphoff
f53d15fe1b Initial checkin for rmlock (read mostly lock) a multi reader single writer
lock optimized for almost exclusive reader access. (see also rmlock.9)

TODO:
    Convert to per cpu variables linkerset as soon as it is available.
    Optimize UP (single processor)  case.
2007-11-08 14:47:55 +00:00
Attilio Rao
0b2e598c14 This is a follow-up, cleaning-up commit about recent changes involving
topology foo functions.
Working at the patch for topology problems in ia32/amd64 evicted some
problems regarding functions ordering in the SI_SUB_CPU family of
SYSINIT'ed subsystems.
In order to avoid problems with new modified to involved functions, a
correct ordering is not semantically specified for SI_SUB_CPU functions
(for a larger view of the issue please visit:
http://lists.freebsd.org/pipermail/freebsd-current/2007-July/075409.html )

Discussed with: peter
Tested by: kris, Rui Paulo <rpaulo@FreeBSD.org>
Approved by: jeff
Approved by: re
2007-09-11 22:54:09 +00:00
John Baldwin
fb1faf2082 Tweak the low-level MI SMP code some:
- Use cpu_spinwait() in the spin loops in stop_cpus(), restart_cpus(), and
  smp_rendezvous_action().
- Remove unneeded acq memory barriers in stop_cpus(), restart_cpus(), and
  smp_rendezvous_action().
- Add an additional synch point in smp_rendezvous() to ensure that all the
  CPUs will always see an up-to-date value of smp_rv_setup_func.

Reviewed by:	attilio
Approved by:	re (kensmith)
Tested on:	alpha, amd64, i386, sparc64 SMP (for several years)
2007-07-03 18:37:06 +00:00
Jeff Roberson
982d11f836 Commit 14/14 of sched_lock decomposition.
- Use thread_lock() rather than sched_lock for per-thread scheduling
   sychronization.
 - Use the per-process spinlock rather than the sched_lock for per-process
   scheduling synchronization.

Tested by:      kris, current@
Tested on:      i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-05 00:00:57 +00:00
Julian Elischer
486a941418 Instead of doing comparisons using the pcpu area to see if
a thread is an idle thread, just see if it has the IDLETD
flag set. That flag will probably move to the pflags word
as it's permenent and never chenges for the life of the
system so it doesn't need locking.
2007-03-08 06:44:34 +00:00
John Baldwin
58553b9925 Rename the KDB_STOP_NMI kernel option to STOP_NMI and make it apply to all
IPI_STOP IPIs.
- Change the i386 and amd64 MD IPI code to send an NMI if STOP_NMI is
  enabled if an attempt is made to send an IPI_STOP IPI.  If the kernel
  option is enabled, there is also a sysctl to change the behavior at
  runtime (debug.stop_cpus_with_nmi which defaults to enabled).  This
  includes removing stop_cpus_nmi() and making ipi_nmi_selected() a
  private function for i386 and amd64.
- Fix ipi_all(), ipi_all_but_self(), and ipi_self() on i386 and amd64 to
  properly handle bitmapped IPIs as well as IPI_STOP IPIs when STOP_NMI is
  enabled.
- Fix ipi_nmi_handler() to execute the restart function on the first CPU
  that is restarted making use of atomic_readandclear() rather than
  assuming that the BSP is always included in the set of restarted CPUs.
  Also, the NMI handler didn't clear the function pointer meaning that
  subsequent stop and restarts could execute the function again.
- Define a new macro HAVE_STOPPEDPCBS on i386 and amd64 to control the use
  of stoppedpcbs[] and always enable it for i386 and amd64 instead of
  being dependent on KDB_STOP_NMI.  It works fine in both the NMI and
  non-NMI cases.
2005-10-24 21:04:19 +00:00
Peter Wemm
48033188a6 Second part of commit for moving KDB_STOP_NMI from opt_global.h to
opt_kdb.h.

Found by:     kris
Approved by:  re
2005-06-30 03:38:10 +00:00
Doug White
fdc9713bf7 Implement an alternate method to stop CPUs when entering DDB. Normally we use
a regular IPI vector, but this vector is blocked when interrupts are disabled.
With "options KDB_STOP_NMI" and debug.kdb.stop_cpus_with_nmi set, KDB will
send an NMI to each CPU instead. The code also has a context-stuffing
feature which helps ddb extract the state of processes running on the
stopped CPUs.

KDB_STOP_NMI is only useful with SMP and complains if SMP is not defined.
This feature only applies to i386 and amd64 at the moment, but could be
used on other architectures with the appropriate MD bits.

Submitted by:	ups
2005-04-30 20:01:00 +00:00
Warner Losh
9454b2d864 /* -> /*- for copyright notices, minor format tweaks as necessary 2005-01-06 23:35:40 +00:00
Julian Elischer
82a1dfc16d Move 4bsd specific experimental IP code into the 4bsd file.
Move the sysctls into kern.sched
2004-09-03 07:42:31 +00:00
Julian Elischer
7e37fb1729 *Blush* forgot to test non SMP builds.. oddly enough some UP code (particularly
in the acpi code) seems to want this in a UP build. (I guess so you can have
a sigle kernel module that works for both)
2004-09-01 18:05:43 +00:00
Julian Elischer
6804a3ab6d Give the 4bsd scheduler the ability to wake up idle processors
when there is new work to be done.

MFC after:	5 days
2004-09-01 06:42:02 +00:00
David E. O'Brien
dd68efd05b s/smp_rv_mtx/smp_ipi_mtx/g
Requested by:	jhb
2004-08-28 00:49:55 +00:00
Peter Wemm
f1009e1e1f Commit Doug White and Alan Cox's fix for the cross-ipi smp deadlock.
We were obtaining different spin mutexes (which disable interrupts after
aquisition) and spin waiting for delivery.  For example, KSE processes
do LDT operations which use smp_rendezvous, while other parts of the
system are doing things like tlb shootdowns with a different mutex.

This patch uses the common smp_rendezvous mutex for all MD home-grown
IPIs that spinwait for delivery.  Having the single mutex means that
the spinloop to aquire it will enable interrupts periodically, thus
avoiding the cross-ipi deadlock.

Obtained from: dwhite, alc
Reviewed by:   jhb
2004-08-23 21:39:29 +00:00
Julian Elischer
c00661f83c Don't keep evaluating our own cpu mask..
it's not likely to have changed....
2004-08-13 00:57:43 +00:00
Nate Lawson
88d2c61ee8 Move the CPU newbus attachment to i386 legacy. The acpi_cpu device will
become just "cpu" and provide attachments in the !legacy case.

Tested by:	des
2004-05-06 15:54:02 +00:00
Marcel Moolenaar
b2ae7ed72c Change the type of the various CPU masks to cpumask_t. Note that as
long as there are still explicit uses of int, whether in types or
in function names (such as atomic_set_int() in sched_ule.c), we can
not change cpumask_t to be anything other than u_int. See also the
commit log for sys/sys/types.h, revision 1.84.
2004-03-27 18:21:24 +00:00
Peter Grehan
721b6196d5 Add powerpc to temporary fix. The new cpu device claims all
'generic' OpenFirmware nexus nodes, since it uses bus_generic_probe.
Maybe the cpu device probe should be MD.
2004-03-16 13:34:50 +00:00
Ken Smith
db322c7eba This is a temporary fix to solve a regression issue on sparc64 that
is caused by the way sparc64 registers its CPUs.  Nate will work on
a real fix shortly.

Approved by:	njl
2004-03-12 20:35:21 +00:00
Nate Lawson
29f5b9a8c1 Hook CPUs up to newbus. CPUs will ultimately be a bus driver so that
multiple CPU-specific drivers can attach.  This is a work in progress
so children aren't supported yet.

Help from:	jhb
2004-03-09 03:37:21 +00:00
Jeff Roberson
b9509b56fa - Move smp_topology to subr_smp.c so that it is defined on all architectures. 2004-01-24 19:52:48 +00:00
Alfred Perlstein
1805ed0772 Introduce mp_maxcpus which can be used by libkvm utils to find out
how many CPUs the system was compiled for.
Export the variable via a sysctl node 'kern.smp.maxcpus' as well.
2003-12-23 13:54:16 +00:00
John Baldwin
45c1c90f6a Export a few SMP related symbols in UP kernels as well. This is needed to
aid other kernel code, especially code which can be in a module such as
the acpi_cpu(4) driver, to work properly with both SMP and UP kernels.
The exported symbols include mp_ncpus, all_cpus, mp_maxid, smp_started, and
the smp_rendezvous() function.  This also means that CPU_ABSENT() is now
always implemented the same on all kernels.

Approved by:	re (scottl)
2003-12-03 14:55:31 +00:00
John Baldwin
798a45964d - Split cpu_mp_probe() into two parts. cpu_mp_setmaxid() is still called
very early (SI_SUB_TUNABLES - 1) and is responsible for setting mp_maxid.
  cpu_mp_probe() is now called at SI_SUB_CPU and determines if SMP is
  actually present and sets mp_ncpus and all_cpus.  Splitting these up
  allows an architecture to probe CPUs later than SI_SUB_TUNABLES by just
  setting mp_maxid to MAXCPU in cpu_mp_setmaxid().  This could allow the
  CPU probing code to live in a module, for example, since modules
  sysinit's in modules cannot be invoked prior to SI_SUB_KLD.  This is
  needed to re-enable the ACPI module on i386.
- For the alpha SMP probing code, use LOCATE_PCS() instead of duplicating
  its contents in a few places.  Also, add a smp_cpu_enabled() function
  to avoid duplicating some code.  There is room for further code
  reduction later since much of this code is also present in cpu_mp_start().
- All archs besides i386 still set mp_maxid to the same values they set it
  to before this change.  i386 now sets mp_maxid to MAXCPU.

Tested on:	alpha, amd64, i386, ia64, sparc64
Approved by:	re (scottl)
2003-11-21 22:23:26 +00:00
John Baldwin
e57ea233d9 Ensure that mp_ncpus is set to 1 if mp_cpu_probe() fails. 2003-10-30 21:44:01 +00:00
Mike Silbersack
184dcdc7c8 Change all SYSCTLS which are readonly and have a related TUNABLE
from CTLFLAG_RD to CTLFLAG_RDTUN so that sysctl(8) can provide
more useful error messages.
2003-10-21 18:28:36 +00:00
Dag-Erling Smørgrav
633f506489 Document some sysctl variables.
Submitted by:	hmp
2003-06-12 19:46:51 +00:00
David E. O'Brien
677b542ea2 Use __FBSDID(). 2003-06-11 00:56:59 +00:00
Julian Elischer
060563ec50 Move the _oncpu entry from the KSE to the thread.
The entry in the KSE still exists but it's purpose will change a bit
when we add the ability to lock a KSE to a cpu.
2003-04-10 17:35:44 +00:00
Jeff Roberson
4093529dee - Move p->p_sigmask to td->td_sigmask. Signal masks will be per thread with
a follow on commit to kern_sig.c
 - signotify() now operates on a thread since unmasked pending signals are
   stored in the thread.
 - PS_NEEDSIGCHK moves to TDF_NEEDSIGCHK.
2003-03-31 22:49:17 +00:00
Julian Elischer
4a338afd7a Move a bunch of flags from the KSE to the thread.
I was in two minds as to where to put them in the first case..
I should have listenned to the other mind.

Submitted by:	 parts by davidxu@
Reviewed by:	jeff@ mini@
2003-02-17 09:55:10 +00:00
Jake Burkholder
dcc4093c7a Add a tunable kern.smp.disabled for disabling explicitly smp on an smp
kernel.
2002-12-28 23:21:13 +00:00
Julian Elischer
71fad9fdee Completely redo thread states.
Reviewed by:	davidxu@freebsd.org
2002-09-11 08:13:56 +00:00