Add an SDT probe, using the newly created DT5 macro, in similar vein
to DEBUG_PARSE printf for when FTP junk is anticipated and ok. This
will assist in debugging port (active) FTP proxy issues.
MFC after: 3 days
Rather than save the return code into an intermediate variable, which BTW
is optimized out anyway, explicitly remove the return code from the stack.
MFC after: 3 days
Over the past few months we published multiple snapshots for this
Linux derived driver and it has become fairly stable in terms of
minimal local changes needed for new updates.
The current version is based on iwlwifi-next update at
cbaa6aeedee5f92dafa5982eceea2a1f98ce4f7d with the addition of
a hand full of files replaced for FreeBSD.
Given the lack of full license texts on non-local files this is
imported under the draft policy for handling SPDX files (D29226). [1]
Do not yet hook this to the build until the remaining compat code
is all in. Along with the firmware import this will make publishing
the last bits and final testing a lot easier.
Sponsored by: The FreeBSD Foundation
Approved by: core (imp) [1]
MFC after: 10 days
Import the most recent versions of the firmware images for iwlwifi
chipsets supported by the "mvm" sub-driver.
This is based on linux-firmware at f5d519563ac9d2d1f382a817aae5ec5473811ac8.
The license of the firmware matches the previous iwnfw(4) and
iwmfw(4) firmware files and you can find a copy in
sys/contrib/dev/iwlwififw/LICENCE.iwlwifi_firmware .
Add build infrastructure to create the .ko files but do not yet hook
it up to the build until all parts are in the tree.
There is an open issue concerning kldxref that we need to resolve
(D32383).
Sponsored by: The FreeBSD Foundation
MFC after: 10 days
This avoids needing to inspect the mount point every time.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D33125
When rolling back a dataset, ZFS has to purge file data resident in the
system page cache. To do this, it loops over all vnodes for the
mountpoint and calls vn_pages_remove() to purge pages associated with
the vnode's VM object. Each page is thus exclusively busied while the
dataset's teardown write lock is held.
When handling a page fault on a mapped ZFS file, FreeBSD's page fault
handler busies newly allocated pages and then uses VOP_GETPAGES to fill
them. The ZFS getpages VOP acquires the teardown read lock with vnode
pages already busied. This represents a lock order reversal which can
lead to deadlock.
To break the deadlock, observe that zfs_rezget() need only purge those
pages marked valid, and that pages busied by the page fault handler are,
by definition, invalid. Furthermore, ZFS pages always transition from
invalid to valid with the teardown lock held, and ZFS never creates
partially valid pages. Thus, zfs_rezget() can use the new
vn_pages_remove_valid() to skip over pages busied by the fault handler.
PR: 258208
Tested by: pho
Reviewed by: avg, sef, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32931
Notable upstream pull request merges:
#12285 Introduce a tunable to exclude special class buffers from L2ARC
#12689 Check l2cache vdevs pending list inside the vdev_inuse()
#12735 Enable edonr in FreeBSD
#12743 FreeBSD: fix world build after de198f2#12745 Restore dirty dnode detection logic
Obtained from: OpenZFS
OpenZFS commit: 269b5dadcf
Notable upstream pull request merges:
#12333: Creating gang ABDs for Raidz optional IOs
#12668: FreeBSD: Catch up with recent VFS changes
#12687: Skip spacemaps reading in case of pool readonly import
#12704: Fix some FreeBSD VOPs to synchronize properly with teardown
#12724: Fix lseek(SEEK_DATA/SEEK_HOLE) mmap consistency
Obtained from: OpenZFS
OpenZFS commit: 6c8f03232a
Hide historical Class A/B/C macros unless IN_HISTORICAL_NETS is defined;
define it for user level. Define IN_MULTICAST separately from IN_CLASSD,
and use it in pf instead of IN_CLASSD. Stop using class for setting
default masks when not specified; instead, define new default mask
(24 bits). Warn when an Internet address is set without a mask.
MFC after: 1 month
Reviewed by: cy
Differential Revision: https://reviews.freebsd.org/D32708
This reverts commit 59eab1093a.
The change suppressed EFAULT originating from uiomove(). The deadlock
avoidance mechanism implemented by vn_io_fault1() in the VFS handles
such errors by wiring the user pages and retrying, but this change
caused read() to return early instead. This can result in short I/O,
causing misbehaviour in some applications, and possibly other
consequences.
Until this is resolved somehow, revert the commit.
Approved by: mm
Notable upstream pull request merges:
#12392 Avoid panic in case of pool errors and missing L2ARC
#12448 skip snapshot in zfs_iter_mounted()
#12516 Fix NFS and large reads on older kernels
#12533 Fail invalid incremental recursive send gracefully
#12569 FreeBSD: Really zero the zero page
#12575 Reject zfs send -RI with nonexistent fromsnap
#12602 Correct refcount_add in dmu_zfetch
#12650 zpool should call zfs_nicestrtonum() with non-NULL handle
Obtained from: OpenZFS
OpenZFS commit: ec64fdb93d
NAT hash tables are inverted for inbound vs outbound. Rather than spend
the time and cycles swapping them, let's simply calculate the bucket
lengths inversely.
MFC after: 1 week
TCP sequence numbers in the FTP proxy are maintained in a two dimensional
array. The debug message prints the same seq[N] for both. Fix that.
MFC after: 3 days
When WITHOUT_INET6 is selected we generate a null if-then-else blocks
due to incorrect placment of #if statments. Move the #if statements
reducing unnecessary runtime comparisons WITHOUT_INET6.
MFC after: 1 week
According to https://github.com/NuxiNL/cloudlibc:
CloudABI is no longer being maintained. It was an awesome experiment,
but it never got enough traction to be sustainable.
There is no reason to keep it in FreeBSD.
Approved by: ed (private mail)
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D31923
Notable upstream pull request merges:
#11312 Temporarily use root credentials to mount snapshots in .zfs
#12246 arc: Drop an incorrect assert
#12443 Fixed data integrity issue when underlying disk returns error
to zfs
#12522 Compressed receive with different ashift can result in incorrect
PSIZE on disk
#12535 Verify embedded blkptr's in arc_read()
#12541 Allow sending corrupt snapshots even if metadata is corrupted
Obtained from: OpenZFS
OpenZFS commit: 4a1195ca50
When a nvlist(9) is converted into a binary buffer by nvlist_pack(9),
the host endianness is encoded in the nvlist_header of the binary
buffer. The nvlist_unpack(9) function converts a given binary buffer
to an nvlist. In the conversion process the endianness encoded in the
nvlist_header is evaluated and -- should the encoded endianness differ
from the endianess of the decoding host -- endianness conversion is
applied to nvlist_header and nvpair_header elements as well as
to some nvpair values.
In 2015 @oshogbo extended libnv with array support (in 347a39b).
The unpacking code misses the possible need to convert the endianness
of the nvph_nitems element of nvpair_headers.
The patch (re)enables libnv to unpack nvlists regardless of the
endianness of the packing host.
Pull Request: https://github.com/freebsd/freebsd-src/pull/528
Notable upstream pull request merges:
#12022 Fix endianness issues with zstd
#12319 Extend zpool-iostat to account for ZIO_PRIORITY_REBUILD
#12458 Add hole punching support on FreeBSD version 1400032
#12473 Initialize parity blocks before RAID-Z reconstruction benchmarking
#12511 Make 'zpool labelclear -f' work on offlined disks
#12514 FreeBSD: Don't remove SA xattr if not SA znode
Obtained from: OpenZFS
OpenZFS commit: 3b89d9518d
Clang 13.0.0 produces a new -Werror warning about the ACPI_TO_INTEGER(p)
and ACPI_OFFSET(d, f) macros in acpica's actypes.h:
sys/contrib/dev/acpica/components/dispatcher/dsopcode.c:708:31: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction]
ObjDesc->Region.Address = ACPI_PTR_TO_PHYSADDR (Table);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
sys/contrib/dev/acpica/include/actypes.h:664:41: note: expanded from macro 'ACPI_PTR_TO_PHYSADDR'
#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i)
^~~~~~~~~~~~~~~~~~
sys/contrib/dev/acpica/include/actypes.h:661:41: note: expanded from macro 'ACPI_TO_INTEGER'
#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sys/contrib/dev/acpica/include/actypes.h:656:82: note: expanded from macro 'ACPI_PTR_DIFF'
#define ACPI_PTR_DIFF(a, b) ((ACPI_SIZE) (ACPI_CAST_PTR (UINT8, (a)) - ACPI_CAST_PTR (UINT8, (b))))
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
This problem of undefined behavior was also reported to acpica by @cem
in 2018: https://github.com/acpica/acpica/issues/407, but it seems there
was never any fix committed for it upstream.
Instead fix these locally, for ACPI_TO_INTEGER by simply casting the
incoming pointer to ACPI_SIZE (which corresponds roughly to uintptr_t
and size_t), and for ACPI_OFFSET by reusing our __offsetof definition
from sys/cdefs.h.
Reviewed by: emaste, kib, imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D31710
Implement kernel support for RFC 5549/8950.
* Relax control plane restrictions and allow specifying IPv6 gateways
for IPv4 routes. This behavior is controlled by the
net.route.rib_route_ipv6_nexthop sysctl (on by default).
* Always pass final destination in ro->ro_dst in ip_forward().
* Use ro->ro_dst to exract packet family inside if_output() routines.
Consistently use RO_GET_FAMILY() macro to handle ro=NULL case.
* Pass extracted family to nd6_resolve() to get the LLE with proper encap.
It leverages recent lltable changes committed in c541bd368f.
Presence of the functionality can be checked using ipv4_rfc5549_support feature(3).
Example usage:
route add -net 192.0.0.0/24 -inet6 fe80::5054:ff:fe14:e319%vtnet0
Differential Revision: https://reviews.freebsd.org/D30398
MFC after: 2 weeks
When a prefix gets deleted from the RIB, dpdk_lpm algo needs to know
the nexthop of the "parent" prefix to update its internal state.
The glue code, which utilises RIB as a backing route store, uses
fib[46]_lookup_rt() for the prefix destination after its deletion
to fetch the desired nexthop.
This approach does not work when deleting less-specific prefixes
with most-specific ones are still present. For example, if
10.0.0.0/24, 10.0.0.0/23 and 10.0.0.0/22 exist in RIB, deleting
10.0.0.0/23 would result in 10.0.0.0/24 being returned as a search
result instead of 10.0.0.0/22. This, in turn, results in the failed
datastructure update: part of the deleted /23 prefix will still
contain the reference to an old nexthop. This leads to the
use-after-free behaviour, ending with the eventual crashes.
Fix the logic flaw by properly fetching the prefix "parent" via
newly-created rt_get_inet[6]_parent() helpers.
Differential Revision: https://reviews.freebsd.org/D31546
PR: 256882,256833
MFC after: 1 week
This does not appear to change generated code with the default
toolchain. However, KMSAN makes use of output operand specifications to
instrument inline asm, and with incorrect specifications we get false
positives in code that uses the CK_(S)LIST macros.
This was submitted upstream:
https://github.com/concurrencykit/ck/pull/175
The commit applies the same change locally to make KMSAN usable until
something equivalent is merged upstream.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).
Sponsored by: The FreeBSD Foundation
Notable upstream pull request merges:
#12339 Read past end of argv array in zpool_do_import()
#12365 Fixes in persistent L2ARC
#12383 Fixes for KMSAN reports
#12425 Avoid small buffer copying on write
#12428 Fix unfortunate NULL in spa_update_dspace
#12446 Allow disabling of unmapped I/O on FreeBSD
Obtained from: OpenZFS
OpenZFS commit: f3678d70ff
Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.
Linux commit:
f696bf6d64b195b83ca1bdb7cd33c999c9dcf514
7bb1fafc2f163ad03a2007295bb2f57cfdbfb630
d34ac5cd3a73aacd11009c4fc3ba15d7ea62c411
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
Currently all PCIE windows point to bus address 0x0, which does not match
the values obtained from hardware during EA.
Replace those values with CPU addresses, since in reality we
have a 1:1 mapping between the two.
This patch is queued for Linux v5.14 in linux-next tree:
6bee93d93111 "arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges"
Notable upstream pull request merges:
#12183 Optimize small random numbers generation
#12227 Revert Consolidate arc_buf allocation checks
#12266 Fix flag copying in resume case
#12273 zfs_metaslab_mem_limit should be 25 instead of 75
#12276 Update cache file when setting compatibility property
#12280 Help compiller optimize out abd_verify()
#12282 FreeBSD: fix compilation of FreeBSD world after 29274c9f6
Obtained from: OpenZFS
OpenZFS commit: 5e2c8338bf
The last commit (538ef055b7) accidentally
set the executable bits for this file. This is not intended to be
executed at all. (Would that even work?)
Sponsored by: Intel Corporation
This version is intended to be used with the 0.29.4 version of the
ice(4) driver, which will be be committed afterwards.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: stallamr_netapp.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D30887
Update the driver in order not to break its compilation
and make use of the new ENA logging system
Migrate platform code to the new logging system provided by ena_com
layer.
Make ENA_INFO the new default log level.
Remove all explicit use of `device_printf`, all new logs requiring one
of the log macros to be used.
If we had a multiple nvlist, during nvlist_pack, we calculated the size
of every nvlist separately. For example, if we had a nvlist with three
nodes each containing another (A contains B, and B contains C), we first
calculated the size of nvlist A (which contains B, C), then we calculate
the size of B (which contains C, notice that we already did the
calculation of B, when we calculate A), and finally C. This means that
this calculation was O(N!). This was done because each time we pack
nvlist, we have to put its size in the header
(the separate header for A, B, and C).
To not break the ABI and to reduce the complexity of nvlist_size,
instead of calculating the nvlist size when requested,
we track the size of each nvlist.
Reported by: pjd, kp
Tested by: kp
Notable upstream pull request merges:
#11710 Allow zfs to send replication streams with missing snapshots
#11751 Avoid taking global lock to destroy zfsdev state
#11786 Ratelimit deadman zevents as with delay zevents
#11803 ZFS traverse_visitbp optimization to limit prefetch
#11813 Allow pool names that look like Solaris disk names
#11822 Atomically check and set dropped zevent count
#11822 Don't scale zfs_zevent_len_max by CPU count
#11833 Refactor zfsdev state init/destroy to share common code
#11837 zfs get -p only outputs 3 columns if "clones" property is empty
#11843 libzutil: zfs_isnumber(): return false if input empty
#11849 Use dsl_scan_setup_check() to setup a scrub
#11861 Improvements to the 'compatibility' property
#11862 cmd/zfs receive: allow dry-run (-n) to check property args
#11864 receive: don't fail inheriting (-x) properties on wrong dataset type
#11877 Combine zio caches if possible
#11881 FreeBSD: use vnlru_free_vfsops if available
#11883 FreeBSD: add support for lockless symlink lookup
#11884 FreeBSD: add missing seqc write begin/end around zfs_acl_chown_setattr
#11896 Fix crash in zio_done error reporting
#11905 zfs-send(8): Restore sorting of flags
#11926 FreeBSD: damage control racing .. lookups in face of mkdir/rmdir
#11930 vdev_mirror: don't scrub/resilver devices that can't be read
#11938 Fix AVX512BW Fletcher code on AVX512-but-not-BW machines
#11955 zfs get: don't lookup mount options when using "-s local"
#11956 libzfs: add keylocation=https://, backed by fetch(3) or libcurl
#11959 vdev_id: variable not getting expanded under map_slot()
#11966 Scale worker threads and taskqs with number of CPUs
#11994 Clean up use of zfs_log_create in zfs_dir
#11997 FreeBSD: Don't force xattr mount option
#11997 FreeBSD: Implement xattr=sa
#11997 FreeBSD: Use SET_ERROR to trace xattr name errors
#11998 Simplify/fix dnode_move() for dn_zfetch
#12003 FreeBSD: Initialize/destroy zp->z_lock
#12010 Fix dRAID self-healing short columns
#12033 Revert "Fix raw sends on encrypted datasets when copying back snapshots"
#12040 Reinstate the old zpool read label logic as a fallback
#12046 Improve scrub maxinflight_bytes math
#12049 FreeBSD: avoid memory allocation in arc_prune_async
#12052 FreeBSD: incorporate changes to the VFS_QUOTACTL(9) KPI
#12061 Fix dRAID sequential resilver silent damage handling
#12072 Let zfs diff be more permissive
#12077 FreeBSD: Retry OCF ENOMEM errors.
#12088 Propagate vdev state due to invalid label corruption
#12091 libzfs: On FreeBSD, use MNT_NOWAIT with getfsstat
#12097 FreeBSD: Update dataset_kstats for zvols in dev mode
#12104 FreeBSD boot code reminder after zpool upgrade
#12114 Introduce write-mostly sums
Obtained from: OpenZFS
OpenZFS commit: 75b4cbf625
uni_msg_extend() may fail due to a memory allocation failure. In this
case, though, the message is freed, so callers shouldn't touch it.
PR: 255861
Reviewed by: harti
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30611
Instead of requiring all implementations of vfs_quotactl to unbusy
the mount for Q_QUOTAON and Q_QUOTAOFF, add an "mp_busy" in/out param
to VFS_QUOTACTL(9). The implementation may then indicate to the caller
whether it needed to unbusy the mount.
Also, add stbool.h to libprocstat modules which #define _KERNEL
before including sys/mount.h. Otherwise they'll pull in sys/types.h
before defining _KERNEL and therefore won't have the bool definition
they need for mp_busy.
Reviewed By: kib, markj
Differential Revision: https://reviews.freebsd.org/D30556
Parts of libprocstat like to pretend they're kernel components for the
sake of including mount.h, and including sys/types.h in the _KERNEL
case doesn't fix the build for some reason. Revert both the
VFS_QUOTACTL() change and the follow-up "fix" for now.
Instead of requiring all implementations of vfs_quotactl to unbusy
the mount for Q_QUOTAON and Q_QUOTAOFF, add an "mp_busy" in/out param
to VFS_QUOTACTL(9). The implementation may then indicate to the caller
whether it needed to unbusy the mount.
Reviewed By: kib, markj
Differential Revision: https://reviews.freebsd.org/D30218
Unfortunately the wrong elemet is freed, also resulting in use-after-free.
PR: 255859
Submitted by: lylgood@foxmail.com
Reported by: lylgood@foxmail.com
MFC after: 3 days
While here, fix all links to older en_US.ISO8859-1 documentation
in the src/ tree.
PR: 255026
Reported by: Michael Büker <freebsd@michael-bueker.de>
Reviewed by: dbaio
Approved by: blackend (mentor), re (gjb)
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D30265
The NAV (network allocation vector) register reflects the current MAC
tracking of NAV - when it will stay quiet before transmitting.
Other devices transmit their frame durations in their 802.11 PHY headers
and all devices that hear a frame - even if it's one in an encoding
they don't understand - will understand the low bitrate PHY header that
includes the frame duration. So, they'll set NAV to this value so
they'll stay quiet until the transmit completes.
Anyway, sometimes the PHY NAV header is garbled and sometimes, notably
older broadcom devices, will fake a long NAV so they can get "cleaner" air
for local calibration. When this happens, the hardware will stay quiet
for quite some time and this can lead to missed/stuck beacons, or
(for Very Large Values) a MAC hang.
This code just adds the ability to get/set the NAV; the driver will
need to take care of using it during transmit hangs and beacon misses
to see if it's due to a trash looking NAV.
The 'ticket' and 'my_ticket' arguments are both read and written within
the same asm block. Clang is stricter with the constraints than gcc4
was, so accepts the '=r' at face value and will happily overwrite
registers that "should" be preserved.
Mark these operands to not clobber other operands, so they get their own
registers.
This fixes a panic on bringing up the octe interfaces.
Notable upstream pull request merges:
#11742 When specifying raidz vdev name, parity count should match
#11744 Use a helper function to clarify gang block size
#11771 Support running FreeBSD buildworld on Arm-based macOS hosts
This is the last update that will be MFCed into stable/13.
From now on, the tracking of OpenZFS branches will be different:
- main continues tracking openzfs/zfs/master
- stable/13 is going to track openzfs/zfs/zfs-2.1-release
Obtained from: OpenZFS
MFC after: 1 week
44c125c4ce switched the nvlist allocations
to be M_WAITOK, but this precludes the use in non-sleepable contexts.
(E.g. with a nonsleepable lock held).
All callers for these allocation functions already cope with memory
alloation failures, so there's no reason to allow sleeping during
allocations.
Reviewed by: melifaro, oshogbo
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29556
Upstream commit message:
Support running FreeBSD buildworld on Arm-based macOS hosts
Arm-based Macs are like FreeBSD and provide a full 64-bit stat from the
start, so have no stat64 variants. Thus, define stat64 and fstat64 as
aliases for the normal versions.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Closes#11771
MFC after: 1 week
ipf_proxy_check() returns -1 for an error and 0 or 1 for success.
ipf_proxy_check()'s callers check for error and if the return code
is 0, they change it to 1 prior to returning to their callers. Simply
by returning -1 or 1 we reduce complexity and cycles burned changing
0 to 1.
MFC after: 1 week
The global list has a marker with an invariant that free vnodes are
placed somewhere past that. A caller which performs filtering (like ZFS)
can move said marker all the way to the end, across free vnodes which
don't match. Then a caller which does not perform filtering will fail to
find them. This makes vn_alloc_hard sleep for 1 second instead of
reclaiming, resulting in significant stalls.
Fix the problem by requiring an explicit marker by callers which do
filtering.
As a temporary measure extend vnlru_free to restart if it fails to
reclaim anything.
Big thanks go to the reporter for testing several iterations of the
patch.
Reported by: Yamagi <lists yamagi.org>
Tested by: Yamagi <lists yamagi.org>
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29324
Notable upstream pull request merges:
#11153 Scalable teardown lock for FreeBSD
#11651 Don't bomb out when using keylocation=file://
#11667 zvol: call zil_replaying() during replay
#11683 abd_get_offset_struct() may allocate new abd
#11693 Intentionally allow ZFS_READONLY in zfs_write
#11716 zpool import cachefile improvements
#11720 FreeBSD: Clean up zfsdev_close to match Linux
#11730 FreeBSD: bring back possibility to rewind the
checkpoint from bootloader
Obtained from: OpenZFS
MFC after: 2 weeks
Add parsing of the rewind options.
When I was upstreaming the change [1], I omitted the part where we
detect that the pool should be rewind. When the FreeBSD repo has
synced with the OpenZFS, this part of the code was removed.
[1] FreeBSD repo: 277f38abff
[2] OpenZFS repo: f2c027bd6a
Originally reviewed by: tsoome, allanjude
Originally reviewed by: kevans (ok from high-level overview)
Signed-off-by: Mariusz Zaborski <oshogbo@vexillium.org>
PR: 254152
Reported by: Zhenlei Huang <zlei.huang at gmail.com>
Obtained from: https://github.com/openzfs/zfs/pull/11730
The current preference number were copied from IPv4 code,
assuming 500k routes to be the full-view. Adjust with the current
reality (100k full-view).
Reported by: Marek Zarychta <zarychtam at plan-b.pwste.edu.pl>
MFC after: 3 days
After the merge of OpenZFS master-9312e0fd1 it has become possible to
import ZFS pools witn an active org.illumos:edonr feature on FreeBSD,
leading to a panic.
In addition, "zpool status" reported all pools without edonr as upgradable
and "zpool upgrade -v" lists edonr in the list of upgradable features.
This is an accepted but not yet included bugfix by upstream.
Obtained from: https://github.com/openzfs/zfs/pull/11653
Differential Revision: https://reviews.freebsd.org/D28935
Reported by: garga (on freebsd-current@)
Reviewed by: freqlabs
X-MFC-with: ba27dd8be8
This package is intended to be used with ice(4) version 0.28.1-k.
That update will happen in a forthcoming commit.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
LARGE_NAT is a C macro that increases
NAT_SIZE from 127 to 2047,
RDR_SIZE from 127 to 2047,
HOSTMAP_SIZE from 2047 to 8191,
NAT_TABLE_MAX from 30000 to 180000, and
NAT_TABLE_SZ from 2047 to 16383.
These values can be altered at runtime using the ipf -T command however
some adminstrators of large firewalls rebuild the kernel to enable
LARGE_NAT at boot. This revision adds the tunable net.inet.ipf.large_nat
which allows an administrator to set this option at boot instead of build
time. Setting the LARGE_NAT macro to 1 is unaffected allowing build-time
users to continue using the old way.
Notable upstream changes:
778869fa1 Fix reporting of mount progress
e7adccf7f Disable use of hardware crypto offload drivers on FreeBSD
03e02e5b5 Fix checksum errors not being counted on repeated repair
64e0fe14f Restore FreeBSD resource usage accounting
11f2e9a49 Fix panic if scrubbing after removing a slog device
MFC after: 2 weeks
Notable upstream changes:
bf156c966 Remove unused abd_alloc_scatter_offset_chunkcnt
658fb8020 Add "compatibility" property for zpool feature sets
This update introduces a new pool property called "compatibility"
that can be used to enable a limited set of pool features on pool
creation and "stick" to it, so the "zpool upgrade" does not
accidentally enable features that are not desired. The value of
this property may then be changed later.
See zpool-features(5) for more information about the "compatibility"
pool property.
Obtained from: OpenZFS
MFC after: 2 weeks
From openzfs-master 0ae184a6b commit message:
If we do not write any buffers to the cache device and the evict hand
has not advanced do not update the cache device header.
Cherry-picked from openzfs 0ae184a6ba
Patch Author: George Amanakis <gamanakis@gmail.com>
MFC after: 3 days
Reviewed by: delphij
Differential Revision: https://reviews.freebsd.org/D28682
