IPV6_EXs in RSS never mean fragment. They mean:
"- Home address from the home address option in the IPv6 destination
options header. If the extension header is not present, use the
Source IPv6 Address.
- IPv6 address that is contained in the Routing-Header-Type-2 from
the associated extension header. If the extension header is not
present, use the Destination IPv6 Address."
UDP_IPV4_EX is an invalid RSS hash type, which will be removed.
Quoted from:
https://docs.microsoft.com/en-us/windows-hardware/drivers/network/rss-hashing-types#ndishashipv6ex
Reviewed by: erj
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D12450
queue lock when the uppoer stack is called inside TCP_LRO
Submitted by: Kevin Bowling <kevin.bowling@kev009.com>
Reviewed by: erj
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11724
Fix minor -Werror issues when building with gcc from -Wredundant-decls,
-Wunused, -Wbool-operations. Also ensure the M_IXL malloc type is only
defined once.
Reviewed by: efj
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11414
From Brett:
In short, busdma maps for received packets were not being unloaded in the
interrupt handler before the packets were passed up the network stack. The fix
was to add a busdma sync and unload for the two receive maps.
This bug is significant for certain busdma providers, for example IOMMUs,
where not unloading the maps means that 1) the IOMMU mappings that allow the
NIC to DMA the received packets into host memory stay open indefinitely,
potentially violating a desired security policy, and 2) resources such as
device address space addresses and host memory for bookkeeping are never freed.
Without an IOMMU or bounce buffering enabled for the ixl device, I don't think
adding these calls will have any significant performance impact. With the
IOMMU enabled, I have noticed a performance impact on the receive side, which
is expected.
Submitted by: Brett Gutstein <bgutstein@rice.edu>
Reviewed by: erj@
MFC after: 1 week
Description from Brett:
"The busdma tags used to create mappings for the tx and rx rings did not have
the device's tag as parents, meaning that they did not respect the device's
busdma properties. The other tags used in the driver had their parents set
appropriately.
Also, the dma maps for each buffer in ixl_txeof() were being NULLed after
being unloaded, which is an error because those maps are then reused without
being recreated (I believe this also leaked resources since the maps were not
destroyed). Simply removing the line that sets the maps to NULL gives the
desired behavior. There does not seem to be a similar problem with ixl_rxeof().
Functions to free the tx and rx rings also NULL out the dma maps for each
buffer, but this seems okay because the maps are destroyed and not reused in
this case.
With these fixes, my ixl card seems to be working with the IOMMU enabled."
Submitted by: Brett Gutstein <bgutstein@rice.edu>
Reviewed by: erj
Approved by: Alan Cox <alc@rice.edu>
MFC after: 1 week
Refresh upstream driver before impending conversion to iflib.
Major new features:
- Support for Fortville-based 25G adapters
- Support for I2C reads/writes
(To prevent getting or sending corrupt data, you should set
dev.ixl.0.debug.disable_fw_link_management=1 when using I2C
[this will disable link!], then set it to 0 when done. The driver implements
the SIOCGI2C ioctl, so ifconfig -v works for reading I2C data,
but there are read_i2c and write_i2c sysctls under the .debug sysctl tree
[the latter being useful for upper page support in QSFP+]).
- Addition of an iWARP client interface (so the future iWARP driver for
X722 devices can communicate with the base driver).
- Compiling this option in is enabled by default, with "options IXL_IW" in
GENERIC.
Differential Revision: https://reviews.freebsd.org/D9227
Reviewed by: sbruno
MFC after: 2 weeks
Sponsored by: Intel Corporation
Original log:
Do not initialize the adapter on MTU change when adapter status is down.
This fixes long-standing problems when changing settings of the adapter.
Discussed in:
https://lists.freebsd.org/pipermail/freebsd-net/2016-June/045509.html
Reported by: Franco Fichtner <franco@opnsense.org>
MFH: 2 days
The variables that are extern in the netmap header file should be
defined in ixl_txrx.c (the file that is included in both ixl(4)/ixlv(4),
not in the main driver source files.
Reported by: ed@, dim@, ngie@
Several files use the internal name of `struct device` instead of
`device_t` which is part of the public API. This patch changes all
`struct device *` to `device_t`.
The remaining occurrences of `struct device` are those referring to the
Linux or OpenBSD version of the structure, or the code is not built on
FreeBSD and it's unclear what to do.
Submitted by: Matthew Macy <mmacy@nextbsd.org> (previous version)
Approved by: emaste, jhibbits, sbruno
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7447
in GENERIC.
Fixup #ifdef RSS code blocks so that they build and add/delete variables
that were missesd during the creation of this code.
This code is untested and should have a big red warning on it.
Reported by: npn@
MFC after: 2 days
Changes:
Kevin Scott i40e-shared: Save off VSI resource count when updating VSI
Anjali Singhai Jain i40e-shared: Expose some registers to program parser, FD and RSS logic
Eric Joyner ixl: Fix errors in queue interrupt setup in MSIX mode.
Shannon Nelson i40e-shared: implement and use rx ctl helper functions
Shannon Nelson i40e-shared: don't use AQ calls from clear_hw
Eric Joyner ixl: Use rx ctl read/write functions instead of register accesses in certain places.
Shannon Nelson i40e-shared: add adminq commands for rx ctl registers
Shannon Nelson i40e-shared: implement and use rx ctl helper functions
Jeremiah Kyle i40e-shared: Corrected function name in comment block
Deepthi Kavalur i40e-shared: correcting a HW capability display info
Shannon Nelson i40e-shared: fixups for (Linux) upstream consistency
Eric Joyner ixl: Only stop firmware's LLDP agent on older firmware versions.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Eric Joyner ixl: Fix compile error when IXL_DEBUG is defined.
Eric Joyner ixl: Fix taskqueues created in init() not being freed in stop().
Eric Joyner ixl: Add additional debug sysctls, for Tx and Rx queue stats.
Eric Joyner ixl: Enable dynamic itr by default.
Eric Joyner ixl: Edit spacing, comments, function signatures (to conform to style(9)).
Eric Joyner ixl: Check for errors when tearing down msix interrupts.
Eric Joyner ixl: Remove unnecessary register reads/writes.
Eric Joyner ixl: Remove admin queue interrupt enable from general interrupt enable.
Eric Joyner ixl: Update switch config after teardown/reset flow in init().
Eric Joyner ixl: Add additional admin queue error code output to admin queue call errors.
Eric Joyner ixl: Don't destroy i40e spinlock if it's already uninitialized.
Shannon Nelson i40e-shared: clean event descriptor before use
Anjali Singhai Jain i40e-shared: When in promisc mode apply promisc mode to Tx Traffic as well
Kevin Scott i40e_shared: Increase timeout when checking GLGEN_RSTAT_DEVSTATE bit
Eric Joyner ixlv: Fix IXL_DEBUG compile issue.
Eric Joyner ixlv: Attempt to fix panic/other issues when rapidly unloading/loading driver.
Eric Joyner ixl/ixlv: Revert m_collapse() in ixl_xmit() to m_defrag().
Deepthi Kavalur i40e_shared: Trace logging HW capabilities
Eric Joyner ixlv: Correctly unlock/relock around init() call in vc_completion().
Eric Joyner ixl: Stop preventing changing flow control mode for CR4 media.
Eric Joyner ixl: Set IPv6 TCP offload flag when doing TSO.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Eric Joyner ixl: Add more error messages/checks to ixl_vsi_assign_msix().
Eric Joyner ixl/ixlv: Clarify a comment about descriptors.
Eric Joyner ixl/ixlv: Improve i40e_debug() implementation.
Eric Joyner ixl/ixlv: Remove unused ASSERT() macro; move struct around.
Eric Joyner ixl: Set initial advertised speed value in init_locked().
Eric Joyner ixl: Fix flow control sysctl value being stored when new value is invalid.
Eric Joyner Edit comments and spacing.
Carolyn Wyborny i40e-shared: Add functions to blink led on Coppervale PHY
Eric Joyner ixl: Re-do interrupt setup.
Eric Joyner ixl: Remove VFLR task setup from legacy flow.
Eric Joyner ixl: Shutdown/setup HMC when handling an EMPR reset.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes:
Kiran Patil i40e-shared: APIs to Add/remove port mirroring rules
Shannon Nelson i40e-shared: add VEB stat control and remove L2 cloud filter
Eric Joyner ixl: Update NVM version information shown.
Eric Joyner ixl: Remove empty else block.
Eric Joyner ixl: Slightly re-work ixl_init_msix().
Eric Joyner ixl: Remove duplicate queue enablement.
Shannon Nelson i40e-shared: implement the API function for aq_set_switch_config
Eric Joyner ixl: Update nvm version string shown in sysctl.
Eric Joyner ixl/ixlv: Changes to PF/VF minor version checking/handling.
Eric Joyner ixlv: Reduce maximum wait time for responses to VF AQ messages.
Eric Joyner ixl/ixlv: Edit comments, comment out code, and edit spacing.
Eric Joyner ixl: Print log message when SR-IOV init is successful.
Eric Joyner ixl: Add Tx Flow Control filter from main PF VSI.
Eric Joyner ixlv: Add extra error message when ixlv_get_vf_config times out.
Eric Joyner ixl: Assign current MOCS optics the XLPPI media type.
Eric Joyner ixl: Remove conditional wait after link status event.
Eric Joyner ixl: Add line break and remove extraneous return statement.
Eric Joyner ixl: Allow 40G speeds in the advertise_speed sysctl.
Eric Joyner ixl: Add "CRC enable" field to link_status sysctl output.
Eric Joyner ixl: Move sbuf.h include out of IXL_DEBUG* defines.
Eric Joyner ixl: Move remaining debug sysctl funcs to IXL_DEBUG_SYSCTL define.
Eric Joyner ixl: Add cases for all remaining media types in shared code to media_status().
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes:
Shannon Nelson i40e-shared: set shared bit for multicast filters
Piotr Raczynski i40e-shared: Bump AQ minor version for FVL/FPK
Eric Joyner ixl: Remove call to i40e_aq_set_mac_config() in init path.
Eric Joyner ixl: Always add interface mac address to driver+hw filter list.
Eric Joyner ixl: Edit comments.
Eric Joyner ixl: Add more descriptive sysctl help messages.
Eric Joyner ixl: Report more info in link_status sysctl.
Eric Joyner ixl: Flip set_aq_phy_int_mask mask bits.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Eric Joyner ixl: Remove substitution of EACCES for EPERM when perrno is set on an nvmupdate command return.
Eric Joyner ixl: Print message when hardware sends GRST interrupt.
Eric Joyner ixl: Fix kernel panic when driver fails to initialize admin queue.
Eric Joyner ixl: Print out messages when a non-handled other interrupt occurs.
Eric Joyner ixl: Fix spaces in a couple messages.
Eric Joyner ixl: Add lock around nvmupd command entry point and reconvert EPERM errors to EACCES.
Anjali Singhai Jain i40e-shared: Make some changes in the nvm read code
Shannon Nelson i40e-shared: AQ Add Run PHY Activity struct
Shannon Nelson i40e-shared: AQ Add Geneve cloud tunnel type
Shannon Nelson i40e-shared: AQ Add external power class to get link status response struct
Shannon Nelson i40e-shared: AQ Add shared resource flags for macvlan filters
Shannon Nelson i40e-shared: AQ Add set_switch_config
Shannon Nelson i40e-shared: AQ Add VXLAN-GPE tunnel type for cloud filter and tunnel commands
Shannon Nelson i40e-shared: AQ thermal sensor control struct
Shannon Nelson i40e-shared: Bump AQ minor version to 1.5 for FVL5 features
Shannon Nelson i40e-shared: add a little more to an NVM update debug message
Carolyn Wyborny i40e-shared: Fix for PHY NVM interaction problem
Eric Joyner i40e-shared: Add prototypes for private NVM write functions
Eric Joyner ixl/ixlv: Remove unused define from ixl.h.
Eric Joyner ixl: Add handling of EMP reset for nvm update purposes.
Eric Joyner ixl: Move addition of device sysctls to separate function.
Eric Joyner ixl: Fix up a couple error messages in ixl_attach().
Eric Joyner ixl: Update the hardware resource allocation debug sysctl.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Kamil Krawczyk i40e-shared: use explicit cast from u16 to u8
Anjali Singhai Jain i40e-shared: Add a Virtchnl offload for RSS PCTYPE V2
Eric Joyner ixl: Remove HP device IDs.
Jesse Brandeburg i40e-shared: add small bit of debug
Mitch Williams i40e-shared: check for stopped admin queue
Mitch Williams i40e-shared: set aq count after memory allocation
Jesse Brandeburg i40e-shared: remove forever unused ID
Eric Joyner ixl: Fix bug where RSS does not hash to more than 16 queues.
Shannon Nelson i40e-shared: define function capabilities in only one place
Eric Joyner ixl: Change spacing, comments, and a single error message.
Eric Joyner ixl: Save admin queue phy interrupt mask as a define.
Eric Joyner ixl: Move callout_reset() to later in init_locked(), and stop clearing OACTIVE in driver flags.
Eric Joyner ixl: Add new reset+build flow to init() if it detects that the admin queue is stopped.
Eric Joyner ixl: Return EACCES instead of EPERM when an nvmupdate command fails.
Eric Joyner ixl: Remove KX_A device ID.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Helin Zhang i40e_shared: Fix compilation error - pointer-arith
Paul M Stillwell Jr i40e-shared: Replace sprintf with i40e_debug
Anjali Singhai Jain i40e-shared: Fix an accidental error with BIT_ULL replacement
Jesse Brandeburg i40e-shared: remove useless assignments
Anjali Singhai Jain i40e-shared: Add a workaround to drop all flow control frames
Anjali Singhai Jain i40e-shared: Add new response struct from FW for AQ command i40e_aqc_lldp_set_local_mib
Anjali Singhai Jain i40e-shared: Acquire NVM, before issuing an AQ read nvm command
Eric Joyner ixl/ixlv: Remove unused MAX_LOOP define.
Eric Joyner ixl: Remove extra aq_get_link_info() call in attach().
Eric Joyner ixl: Modify a couple error messages in attach() to be more informative.
Eric Joyner ixl: Add i40e_get_link_status() call to init_locked().
Eric Joyner ixl: Move callout_stop() to earlier in ixl_stop().
Eric Joyner ixl: Add extra comments around link ITR code.
Eric Joyner ixl: Attempt to enhance link event handling.
Eric Joyner ixl: Style, spacing, and comment changes.
Eric Joyner ixl: Add I40E_NVM_ACCESS definition.
Eric Joyner ixl: Add interface for nvmupdate tool ioctl to driver.
Eric Joyner ixl: Don't strip out nvm update support from the driver anymore.
Eric Joyner ixl: Interrupts are now allocated/setup and torn down/released on init()/stop().
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Greg Rose ixl: Add MAC+VLAN filter for LAA MAC assignment
Carolyn Wyborny i40e_shared: fix for PHY NVM interaction problem
Anjali Singhai Jain i40e-shared: Fix an accidental error with BIT_ULL replacement
Eric Joyner ixl: Fix potential crash when loading driver a startup and cannot setup all requested MSIX vectors.
Eric Joyner ixl: Add max of 8 queues limit to autoconfig.
Eric Joyner ixl: Re-add ian@'s sysctl fixes from upstream (r280043).
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
This first update will revert some upstream changes; forthcoming updates will reinstate them.
Changes, by author:
Anjali Singhai Jain i40e-shared: Add WB_ON_ITR offload support
Shannon Nelson i40e-shared: fix phy_types bitmap type
Kevin Scott i40e-shared: Store off PHY capabilities
Shannon Nelson i40e-shared: fix byteswap of phy_type
Jingjing Wu i40e-shared: Fix compile issue related to const string
Greg Bowers i40e-shared: Add AQ defines for non-willing Apps (DCB)
Greg Bowers i40e-shared: Support for non-willing Apps (DCB)
Shannon Nelson i40e-shared: use upper-32 bit macro for address
Shannon Nelson i40e-shared: grab the AQ spinlocks before clearing registers
Eric Joyner ixl: Properly strip out X722_SUPPORT (temporarily).
Eric Joyner ixl: Allow Fort Pond devices to advertise 100M in set_advertise sysctl.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
And factor out tcp_lro_rx_done, which deduplicates the same logic with
netinet/tcp_lro.c
Reviewed by: gallatin (1st version), hps, zbb, np, Dexuan Cui <decui microsoft com>
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5725
- Limit queue autoconfiguration to 8 queues to prevent the driver from
requesting a large number of MSI-X vectors at boot.
- Fix potential kernel panic that occurs when the driver loads and cannot
get all requested MSIX vectors. Instead, attach() will fail with an error.
- Move taskqueue setup to later in attach() to prevent having to free
taskqueues if some other error in attach() occurs.
Differential Revision: https://reviews.freebsd.org/D5205
MFC after: 1 month
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
The m_collapse() call would fail when transmitting medium-sized packets
when the interface mtu was set to 9000, so revert back to m_defrag(),
which does not fail.
Differential Revision: https://reviews.freebsd.org/D5207
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
- I40E_PFINT_DYN_CTLN needs to be cleared, and not have a queue index
written to it.
- The interrupt linked list for each queue is changed to only include
the queue's Rx and Tx queues.
Differential Revision: https://reviews.freebsd.org/D5206
Reviewed by: sbruno
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
- Change tc_mapping field to assign 64 queues instead of 16 to the PF's VSI;
add comments to describe how this is done.
- Set hash lut size to 512 when setting filter control; the lut size defaults
to 128 if this isn't set.
Differential Revision: https://reviews.freebsd.org/D5203
Reviewed by: gallatin
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
Fix the inverted set of interrupts being used as the mask for ixl.
Without this ixl devices fail to detect link state changes.
Reviewed by: erj, sbruno
MFC after: 2 days
Sponsored by: Multiplay
stable/10 doesn't have the if_getdrvflags(9) KPI. Reference the field in the
structure directly if the __FreeBSD_version is < 1100022, so the driver can
be built with PCI_IOV support on stable/10, without backporting all of
r266974 (which requires additional changes due to projects/ifnet, etc)
Differential Revision: https://reviews.freebsd.org/D4759
Reviewed by: erj, sbruno
Sponsored by: EMC / Isilon Storage Division
Remove the use of sbuf_data on drained sbufs from the debug sysctls:
* ixl_sysctl_hw_res_alloc
* ixl_sysctl_switch_config
This prevents a kernel panic when accessing these values under a kernel
compiled with INVARIANTS.
Sponsored by: Multiplay
- Add required MAC/VLAN filter when adding an LAA
- Fix bug where code did not check for I40E_SUCCESS from a successful
i40e_validate_mac_address() call in ixl_init_locked(), when setting
an LAA.
PR: 201240
Differential Revision: https://reviews.freebsd.org/D3111
Submitted by: Gregory Rose <gregory.v.rose@intel.com>
Reviewed by: gnn, rstone
Approved by: gnn
MFC after: 2 weeks
code update, with supporting changes in the CORE. Changes for the extended
media types, VF driver has virtual channel protocol changes, and some
register use corrections. This software change should be coordinated with
Firmware updates to your hardware, contact your support channels for that.
MFC after: 1 week
Leaf drivers should not import the PCI bus interface to add IOV handling.
Instead, move the IOV client methods to a separate kobj interface.
Differential Revision: https://reviews.freebsd.org/D2584
Reviewed by: rstone
- Use hardware counters for ifnet stats in igb(4) when possible. This
ensures these stats include packets that bypass the regular stack via
netmap.
- Don't derefence values off the end of the igb(4) VF stats structure.
Instead, add a dedicated if_get_counter method for igb(4) VF interfaces.
- Report missed packets on igb(4) as input queue drops rather than an
input error.
- Report bug_ring drop counts as output queue drops for igb(4) and ixgbe(4).
- Export the buf_ring drop stats for individual rings via sysctl on
ixgbe(4).
- Fix a typo that in ixl(4) that caused output queue drops to be reported
as input queue drops and input queue drops to be unreported.
Differential Revision: https://reviews.freebsd.org/D2402
Reviewed by: jfv, rstone (6)
Sponsored by: Norse Corp, Inc.
adding this major feature to the driver. Secondly, this updates the base
driver with new 20G device support, and with the new firmware levels some
changes to link handling and initialization were required.
MFC after: 1 week
Preliminary tests indicate 32 Mpps on tx, 24 Mpps on rx
with source and receiver on two different ports of the same 40G card.
Optimizations are likely possible.
The code follows closely the one for ixgbe so i do not
expect stability issues.
Hardware kindly supplied by Intel.
Reviewed by: Jack Vogel
MFC after: 1 week
bits.
The motivation here is to eventually teach netisr and potentially
other networking subsystems a bit more about how RSS work queues / buckets
are configured so things have a hope of auto-configuring in the future.
* net/rss_config.[ch] takes care of the generic bits for doing
configuration, hash function selection, etc;
* topelitz.[ch] is now in net/ rather than netinet/;
* (and would be in libkern if it didn't directly include RSS_KEYSIZE;
that's a later thing to fix up.)
* netinet/in_rss.[ch] now just contains the IPv4 specific methods;
* and netinet/in6_rss.[ch] now just contains the IPv6 specific methods.
This should have no functional impact on anyone currently using
the RSS support.
Differential Revision: D1383
Reviewed by: gnn, jfv (intel driver bits)
if_ixl to version 1.3.0, if_ixlv to version 1.2.0
- Major change in both drivers is to add RSS support
- In ixl fix some interface speed related issues, dual
speed was not changing correctly, KR/X media was not
displaying correctly (this has a workaround until a
more robust media handling is in place)
- Add a warning when using Dell NPAR and the speed is
less than 10G
- Wrap a queue hung message in IXL_DEBUG, as it is non-fatal,
and without tuning can display excessively
MFC after: 1 week
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.
This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.
"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.
Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.
MFC after: 1 month
Sponsored by: Mellanox Technologies
-Improved VF stability, thanks to changes from Ryan Stone,
and Juniper.
- RSS fixes in the ixlv driver
- link detection in the ixlv driver
- New sysctl's added in ixl and ixlv
- reset timeout increased for ixlv
- stability fixes in detach
- correct media reporting
- Coverity warnings fixed
- Many small bug fixes
- VF Makefile modified - nvm shared code needed
- remove unused sleep channels in ixlv_sc struct
Submitted by: Eric Joyner (committed by jfv)
MFC after: 1 week
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
In some code that is shared between the ixl(4) and ixlv(4) drivers,
a macro hard-coded a register offset that was not valid on ixlv devices.
Fix this by having each driver define a variable that contains the correct
offset.
Reviewed by: Eric Joyner <ricera10 AT gmail.com>
MFC after: 3 days
Sponsored by: Sandvine Inc
Rather than #define-ing common code function calls to OS-dependent
ones, make the osdep versions match the common code expectations,
adjust the FreeBSD specific code to use those, and remove the
#defines.
In the FreeBSD specific code, use "i40e_mem_reserved" for the
now expected but unused argument to i40e_allocate_dma_mem().
Reviewed by: gnn, eric.joyner intel.com
MFC after: 3 days
with mbufs normally called *m in one place), rename the function
arguments to "mem".
This is a non-functional change.
Reviewed by: gnn, eric.joyner intel.com
MFC after: 3 days
extension. Provide prototypes for the actual implementations.
Correct function arguments to match the implementations.
MFC after: 3 days
X-MFC with: r270755
and code to make the code compile.
Give the function seems to be slightly mixed with csum and tso,
make it non-fatal if we try to setup thing on a kernel without IP
support. In practise the printf on the console will probably still
make your machine unhappy.
MFC after: 3 days
X-MFC with: r270755
In general theraven is right that we should factr this out and provide
a general and per-arch implementation that everything can use.
MFC after: 3 days
X-MFC with: r270755
- use proper __FreeBSD_version check and more importantly check for __am64__
to be defined. Whether the FreeBSD(_version) checks are needed is a
different question.
- cast uint64_t to uintmax_t and use %jx for printing.
Note: there are more values that could be printed in that status function
but leave that for the future; printf doesn't seem to be the right
way to do it anyway.
Note: there is more breakage related to i40e_allocate_dma*() having
conflicting declarations, so more fixes to come.
PR: 193112
MFC after: 3 days
X-MFC with: r270755
Fix missing includes and invalid vars in ixl / ixlv driver added by r270346
which caused build failures for GENERIC kernel after it was made default
by r270755.
X-MFC-With: r270346 / r270755
Sponsored by: Multiplay
- It was decided to change the driver name to if_ixl for FreeBSD
- This release adds the VF Driver to the tree, it can be built into
the kernel or as the if_ixlv module
- The VF driver is independent for the first time, this will be
desireable when full SRIOV capability is added to the OS.
- Thanks to my new coworker Eric Joyner for his superb work in
both the core and vf driver code.
Enjoy everyone!
Submitted by: jack.vogel@intel.com and eric.joyner@intel.com
MFC after: 3 days (hoping to make 10.1)
