These ioctls are not documented and only stubbed in a few drivers: mse(4),
psm(4) and syscon's sysmouse(4). The only exception is MOUSE_GETVARS
implemented in psm(4)
Given the fact that they were introduced 20 years ago and implementation
has never been completed, remove any related code.
PR: 228718 (exp-run)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D15726
OF_getprop_alloc takes element size argument and returns number of
elements in the property. There are valid use cases for such behavior
but mostly API consumers pass 1 as element size to get string
properties. What API users would expect from OF_getprop_alloc is to be
a combination of malloc + OF_getprop with the same semantic of return
value. This patch modifies API signature to match these expectations.
For the valid use cases with element size != 1 and to reduce
modification scope new OF_getprop_alloc_multi function has been
introduced that behaves the same way OF_getprop_alloc behaved prior to
this patch.
Reviewed by: ian, manu
Differential Revision: https://reviews.freebsd.org/D14850
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
'status' array passed to get_mouse_status() is usually uninitialized by
callers.
Fully populating it with values in get_mouse_status() can fail due to
read_aux_data().
Additionally, nothing in API constrains 'len' to be >= 3. In practice,
every caller passes three, so perhaps that argument should just be removed.
Refactoring is a larger change, though.
Remove use of potentially uninitialized values by:
1. Only printing 3 debug statuses if the passed array was at least
'len' >= 3;
2. Populating 'status' array up to first three elements, if read_aux_data()
failed.
No functional change intended.
Reported by: Coverity
Sponsored by: Dell EMC Isilon
synaptics or elantech sanity checker.
After packet has been rejected contents of packet buffer is not cleared
with setting of inputbytes counter to 0. So when this packet buffer is
filled again being an element of circular queue, new data appends to old
data rather than overwrites it. This leads to packet buffer overflow
after 10 rounds.
Fix it with setting of packet's inputbytes counter to 0 after rejection.
While here add extra logging of rejected packets.
PR: 222667 (for reference)
Reported by: Neel Chauhan <neel@neelc.org>
Tested by: Neel Chauhan <neel@neelc.org>
MFC after: 1 week
Most synaptics touchpads return 0x47 in middle byte in responce to identify
command as stated in p.4.4 of "Synaptics PS/2 TouchPad Interfacing Guide".
But some devices e.g. found on HP EliteBook 9470m return 0x46 here.
Allow them to be identified as Synaptics as well as 0x47.
ExtendedQueries return incorrect data on such a touchpads so we ignore
their result and set conservative defaults.
PR: 222667
Reported by: Neel Chauhan <neel@neelc.org>
Tested by: Neel Chauhan <neel@neelc.org>
Approved by: gonzo
Modern touchpads do not issue interrupts on inactivity so "lost interrupt"
message became annoying spam nowadays. This change quiets the message
if debug.psm.loglevel=5 (or less) is set in /boot/loader.conf
Approved by: gonzo
ForcePads do not have any physical buttons, instead they detect click
based on finger pressure. Forcepads erroneously report button click
if there are 2 or more fingers on the touchpad breaking multifinger
gestures. To workaround this start reporting a click only after
4 consecutive single touch packets has been received. Skip these packets
in case more contacts appear.
PR: 223369
Reported by: Neel Chauhan <neel@neelc.org>
Tested by: Neel Chauhan <neel@neelc.org>
Reviewed by: gonzo
Approved by: gonzo
This fixes a panic when `EVDEV_SUPPORT` is enabled: if a trackpoint
packet was detected but there was no trackpoint, we still tried to emit an
evdev event even though the associated relative evdev device (`evdev_r`)
was not initialized.
PR: 225339
MFC after: 1 week
In psmprobe(), we set the initial `syncmask` to the vendor default value
if the `PSM_CONFIG_NOCHECKSYNC` bit is unset. However, we currently only
set it for the Elantech touchpad later in psmattach(), thus `syncmask`
is always configured.
Now, we check `PSM_CONFIG_NOCHECKSYNC` and skip sync check if it is set.
This fixes Elantech touchpad support for units which have `hascrc` set.
To clarify that, when we log the `syncmask` and `syncbits` fields, also
mention if they are actually used.
Finally, when we set `PSM_CONFIG_NOCHECKSYNC`, clear `PSM_NEED_SYNCBITS`
flag.
PR: 225338
MFC after: 1 week
ISA PNP card support (replace by hand version in if_ed). Move module
declarations to the end of some files. Fix PCCARD_PNP_INFO to use
nitems(). Remove some stale comments about pc98, turns out the comment
was simply wrong.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
This fixes "Kernel has only x or y resolution, not both" libinput error.
Reported by: Ivan <bsd@abinet.ru>
Tested by: Ivan <bsd@abinet.ru>
Approved by: gonzo (mentor)
MFC after: 2 weeks
Both relative and absolute multitouch modes are supported.
To enable psm(4) evdev support one should:
1. Add `device evdev` and `options EVDEV_SUPPORT` to kernel config file
2. Add hw.psm.elantech_support=1 or hw.psm.synaptics_support=1 to
/boot/loader.conf for activation of absolute mode on touchpads
3. Add kern.evdev.rcpt_mask=12 to /etc/sysctl.conf to enable psm event
sourcing and disable sysmouse
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10265
Tested by: wulf, Jan Kokemueller (Lenovo devs)
Increase hw.psm.synaptics.min_pressure default value from 16 to 32
to nearly match Linux driver (30-35 hysteresis loop).
This makes libinput tap detection more reliable.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
It is already included via sys/systm.h
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10266
models. This change is based on Linux driver.
Determine logical trace size. It used for calculation of touch sizes
in surface units for MT-protocol type B evdev reports.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10266
Linux does. It should not affect gesture processing in current state as it
ignores finger coords on 3-finger tap detection but it should make evdev
reports looking more Linux-alike.
Reviewed by: gonzo
Approved by: gonzo
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10266
This is done with discarding pointer movements rather then mouse packets
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10266
Elan hw v.4 touchpads often sends touchpad release packet right after
touchpad touch one. Most probably this happens due to PS/2 limited bandwith.
Reducing of tap_min_queue size to 1 makes multifinger tap detection
more reliable in this case.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10266
Wait for all advertised head packets after status packet have been received.
This fixes rare but quite annoying issue in Elan hw v.4 touchpads support
when triple-finger taps are reported as double-finger taps under several
circumstances.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10266
On laptops like the ThinkPad X240, ClickPad buttons are located at the
top. The hw.psm.synaptics.softbuttons_y sysctl was supposed to allow this
by setting the value to a negative one (e.g. -1700). However, the
condition was wrong (double negative), and doing that placed the buttons
in an unreachable area.
PR: 216342
Submitted by: Greg V <greg@unrelenting.technology>
MFC after: 1 week
To enable event sourcing from atkbd kern.evdev.rcpt_mask value
should have bit 3 set.
Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8381
With guest trackpoint present trackpoint probing switched synaptics
device to absolute mode with different protocol instead of keeping it
in relative mode.
PR: 213757
Submitted by: Vladimir Kondratyev <wulf@cicgroup.ru>
MFC after: 1 week
- Replace tunables-only hw.psm.synaptics_support, hw.psm.trackpoint_support,
and hw.psm.elantech_support with respective sysctls declared with
CTLFLAG_TUN. It simplifies checking them in userland, also makes them
easier to get discovered by user
- Get rid of debug.psm.loglevel and hw.psm.tap_enabled TUNABLE_INT
declaration by adding CTLFLAG_TUN to read/write sysctls that were
already declared for these tunables.
Suggested by: jhb
Elantech trackpads are found in some laptops like the Asus UX31E. They
are "synaptics compatible" but use a slightly different protocol.
Elantech hardware support is not enabled by default and just like
Synaptic or TrackPoint devices it should be enabled by setting
tunable, in this case hw.psm.elantech_support, to non-zero value
PR: 205690
Submitted by: Vladimir Kondratyev <wulf@cicgroup.ru>
MFC after: 1 week
No functional change, only trivial cases are done in this sweep,
Drivers that can get further enhancements will be done independently.
Discussed in: freebsd-current
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).
Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.
Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)
Tested PAE and devinfo on virtualbox (live CD)
Special thanks to bz for his testing on ARM.
Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.
This is step one in migrating rman to use uintmax_t for resources instead of
u_long.
Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.
This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.
Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
absolute position. This seems to be correlated with only removing a single
finger. To work around this report no movement on from the first packet
when the user exits scrolling.
There was a inconsistency which led to enable passthrough commands
being interpreted as actual touchpad commands.
Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com>
MFC after: 1 week
which is default. It was broken in r281441.
It appears that set_trackpoint_parameters() call on resume disables the
mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0.
The problem is that the probe functions are used both for probing and
for reiniting on resume. And the absense of the softc parameter is used
as a mark to distinguish reinit and probe, which is quite ugly. At the
same time the softc parameter is needed to call set_trackpoint_parameters().
o Change the arguments of probefunc_t to always supply the softc, and
use additional enum argument to tell probing from initing.
o Don't call set_trackpoint_parameters() from global doinitialize(),
instead call it from the enable_trackpoint() only.
o In enable_synaptics() call enable_trackpoint() in both probe and
reinit cases.
Together with: Jan Kokemüller <jan.kokemueller gmail.com>
Several improvements to the Synaptics driver to support
semi-multitouch trackpads and some other fixes:
- Two finger scrolling support for "semi-MT" touchpads. Those include
many of the older Synaptics touchpads before "true" multitouch support
(indicated by capMultiFinger). Semi-MT touchpads can report a second
finger position, but the X or Y coordinate may be swapped with some
coordinate of the first finger. This is a result of how the hardware
works internally. Therefore, all that can be reliably extracted is the
bounding box of the two finger positions. Semi-MT touchpads can be
recognized by the capAdvancedGestures capability bit. After setting the
mode byte, advanced gestures mode has to be enabled. Then, data packets
compatible with the capMultiFinger format are sent, so the same two
finger scrolling code can be leveraged. Enabling advanced gestures mode
on true multitouch touchpads should be harmless. Linux seems to always
enable advanced gestures mode.
- Put mode setting logic into own functions synaptics_preferred_mode()
and synaptics_set_mode() to have this in one place.
synaptics_passthrough_on() and synaptics_passthrough_off() currently
always use 0xc1 as the mode byte, which may be wrong for touchpads that
don't have capExtended.
- Expose X and Y resolution of touchpad to userland. Also expose minimum
and maximum X and Y coordinates. This is useful for programs in
userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and
need to interpret the coordinates.
- Also send "extended w mode" packets (see section 3.2.9 of
511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled.
This is useful for userspace programs/drivers such as
xf86-input-synaptics that can handle these packets.
- Fix parsing of nExtendedQueries, and request extended/continued
capability bits depending on this value.
- capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must
be extracted from status[0] and not status[2], I think.
Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
Instead of trying to get the keyboard repeat rate set by the BIOS just set a
default one. This allows removing the usage of x86bios from atkbd.
Sponsored by: Citrix Systems R&D
Reviewed by: jkim, delphij
Differential Revision: https://reviews.freebsd.org/D2399
MFC after: 2 weeks
On trackpads that had support for both, we were sending two button
events when the trackpad was pressed.
Tested by: Jakob Alvermark <jakob at alvermark.net>
MFC after: 1 week
To accomplish this, we must put the Synaptics hardware in passthrough
mode when talking to the trackpoint.
I only performed minor style modifications.
Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com>
MFC after: 1 week
Enable two finger scrolling by default and disable the edge scrolling if
the touchpad has no physical zone for it. Disable directional scrolling
by default to avoid using extended buttons as scroll buttons.
Add support for ClickPad. On Lenovo laptops, this is the button
reported when one presses the touchpad.
While there, fix a problem where the extended buttons were not reporting
the button release event correctly: we need to save the state of the
buttons and report it to sysmouse until we receive a packet from the
touchpad indicating the button has been released. This makes it
possible to use an extended button to resize a window. On Lenovo
laptops, the major buttons are actually reported as extended buttons.
Tested by: many (current@)
MFC after: 1 week
