others can be replaced cleanly by the amd64 versions. There is no
current amd64 version to merge, but there is an old one which is
similar.
Fix the following bugs in fpresetsticky():
- garbage args clobbered non-sticky bits in the status register
- the return value was usually garbage since it was masked with the
arg instead of with the field selector.
Optimize fpresetsticky() to avoid using the environment as in
feclearexcept() (use only fnclex() if possible) and also to avoid
using fnclex() for null changes. The second of these optimizations
might not be so good since its branch might cost more than it saves.
Remove this argument and pass curthread directly to underlying
VOP_LOCK1() VFS method. This modify makes the code cleaner and in
particular remove an annoying dependence helping next lockmgr() cleanup.
KPI results, obviously, changed.
Manpage and FreeBSD_version will be updated through further commits.
As a side note, would be valuable to say that next commits will address
a similar cleanup about VFS methods, in particular vop_lock1 and
vop_unlock.
Tested by: Diego Sardina <siarodx at gmail dot com>,
Andrea Di Pasquale <whyx dot it at gmail dot com>
pv_list_count from struct md_page. Ever since Peter rewrote the pv
entry allocator for amd64 and i386 pv_list_count has been correctly
maintained but otherwise unused.
instead of writing apologetic comments. As it turns out, I need every
kernel page table page to have a legitimate pindex to support superpage
promotion on kernel memory.
Correct a nearby style error: Pointers should be compared to NULL.
implemented with macros. This patch improves code readability. Reasoning
behind vidd_* is a sort of "video discipline".
List of macros is supposed to be complete--all methods of video_switch
ought to have their respective macros from now on.
Functionally, this code should be no-op. My intention is to leave current
behaviour of touched code as is.
No objections: rwatson
Silence on: freebsd-current@
Approved by: cognet
for that argument. This will allow DDB to detect the broad category of
reason why the debugger has been entered, which it can use for the
purposes of deciding which DDB script to run.
Assign approximate why values to all current consumers of the
kdb_enter() interface.
old code special cased them too early which caused a few differences for
these sort of links relative to other PCI links:
- They were always re-routed via the BIOS call instead of assuming that
they were already routed if the BIOS had programmed the IRQ into a
matching device during POST.
- If the BIOS did route that link to a different IRQ that was marked as
invalid, we trusted the $PIR table rather than the BIOS IRQ.
This change moves the special casing for "unique IRQ" links to only take
that into account when picking an IRQ for an unrouted link so that these
links will now not be routed if the BIOS appears to have routed it already
(some BIOSen have problems with that) and so that if the BIOS uses a
different IRQ than the $PIR, we trust the BIOS routing instead (this is
what we do for all other links as well).
Reported by: Bruce Walter walter of fortean com
MFC after: 1 week
cards:
o RocketRAID 172x series
o RocketRAID 174x series
o RocketRAID 2210
o RocketRAID 222x series
o RocketRAID 2240
o RocketRAID 230x series
o RocketRAID 231x series
o RocketRAID 232x series
o RocketRAID 2340
o RocketRAID 2522
Many thanks to Highpoint for their continued support of FreeBSD.
Submitted by: Highpoint
register (MacBooks only).
This allows MacBooks to boot in SMP mode without any trick and solves
the timer problems with HZ=1000.
MFC after: 1 week
Reviewed by: njl (mentor), jhb
Approved by: njl (mentor), jhb
with insufficient protection mode.
For the i386 and amd64, create the tunable, machdep.prot_fault_translation,
with the following behaviour:
0 = autodetect the signal to be delivered on KERN_PROTECTION_FAILURE
from vm_fault based on the ELF OSABI note:
no note or __FreeBSD_version < 700004 - SIGBUS/BUS_PAGE_FAULT
note, and __FreeBSD_version >= 700004 - SIGSEGV/SEGV_ACCERR
1 = always SIGBUS/BUS_PAGE_FAULT
2 = always SIGSEGV/SEGV_ACCERR
This would do mostly automatic correction of ABI breakage, with the exception
of the untaged binaries for 7-CURRENT/RELENG_7 before the note is fixed. For
them, sysctl would allow to run the binary with manual settings.
Discussed with: portmgr (kris)
PR: kern/118304
MFC after: 3 days
- Introduce per-architecture stack_machdep.c to hold stack_save(9).
- Introduce per-architecture machine/stack.h to capture any common
definitions required between db_trace.c and stack_machdep.c.
- Add new kernel option "options STACK"; we will build in stack(9) if it is
defined, or also if "options DDB" is defined to provide compatibility
with existing users of stack(9).
Add new stack_save_td(9) function, which allows the capture of a stacktrace
of another thread rather than the current thread, which the existing
stack_save(9) was limited to. It requires that the thread be neither
swapped out nor running, which is the responsibility of the consumer to
enforce.
Update stack(9) man page.
Build tested: amd64, arm, i386, ia64, powerpc, sparc64, sun4v
Runtime tested: amd64 (rwatson), arm (cognet), i386 (rwatson)
allocation fails and pv entries are reclaimed, there may be an unused pv
entry in a pv chunk that survived the reclamation. However, previously,
after reclamation, get_pv_entry() did not look for an unused pv entry in
a surviving pv chunk; it simply retried the page allocation. Now, it
does look for an unused pv entry before retrying the page allocation.
Note: This only applies to RELENG_7. Earlier branches use a different
pv entry allocator.
MFC after: 6 weeks
since the branch caches on at least Athlon XP through Athlon 64 CPU's
don't understand such instructions and guarantee a cache miss taking
at least 10 cycles. Use the documented workaround "ret $0" instead
("nop; ret" also works, but "ret $0" is probably faster on old CPUs).
Normal code (even asm code) doesn't branch to "ret", since there is
usually some cleanup to do, but the __mcount, .mcount and .mexitcount
entry points were optimized too well to have the minimum number of
instructions (3 instructions each if profiling is not enabled) and
they did this. I didn't see a significant number of cache misses for
.mexitcount, but for the shared "ret" for __mcount and .mcount I
observed cache misses costing 26 cycles each. For a send(2) syscall
that makes about 70 function calls, the cost of these cache misses
alone increased the syscall time from about 4000 cycles to about 7000
cycles. 4000 is for a profiling (GUPROF) kernel with profiling disabled;
after this fix, configuring profiling only costs about 600 cycles in the
4000, which is consistent with almost perfect branch prediction in the
mcounting calls.
unused except to obfuscate disassemblies. -mprofiler-epilogue is
currently with gcc-4 (it does too little), but -finstrument-functions
is broken in a different way (it does too much).
amd64 version: meger whitespace fixes from i386 version.
- On amd64, just assume type #1 is always used. PCI 2.0 mandated
deprecated type #2 and required type #1 for all future bridges which
was well before amd64 existed.
- For i386, ignore whatever value was in 0xcf8 before testing for type #1
and instead rely on the other tests to determine if type #1 works. Some
newer machines leave garbage in 0xcf8 during boot and as a result the
kernel doesn't find PCI at all (which greatly confuses ACPI which expects
PCI to exist when PCI busses are in the namespace).
MFC after: 3 days
Discussed with: scottl
Currently, Giant is not too much contented so that it is ok to treact it
like any other mutexes.
Please don't forget to update your own custom config kernel files.
Approved by: cognet, marcel (maintainers of arches where option is
not enabled at the moment)
routine. It is not needed as the existing tests for segment coalescing
already handle bounced addresses and it prevents legal segment coalescing
in certain edge cases.
MFC after: 1 week
Reviewed by: scottl
include the ithread scheduling step. Without this, a preemption might
occur in between the interrupt getting masked and the ithread getting
scheduled. Since the interrupt handler runs in the context of curthread,
the scheudler might see it as having a such a low priority on a busy system
that it doesn't get to run for a _long_ time, leaving the interrupt stranded
in a disabled state. The only way that the preemption can happen is by
a fast/filter handler triggering a schduling event earlier in the handler,
so this problem can only happen for cases where an interrupt is being
shared by both a fast/filter handler and an ithread handler. Unfortunately,
it seems to be common for this sharing to happen with network and USB
devices, for example. This fixes many of the mysterious TCP session
timeouts and NIC watchdogs that were being reported. Many thanks to Sam
Lefler for getting to the bottom of this problem.
Reviewed by: jhb, jeff, silby
First, a file is mmap(2)ed and then mlock(2)ed. Later, it is truncated.
Under "normal" circumstances, i.e., when the file is not mlock(2)ed, the
pages beyond the EOF are unmapped and freed. However, when the file is
mlock(2)ed, the pages beyond the EOF are unmapped but not freed because
they have a non-zero wire count. This can be a mistake. Specifically,
it is a mistake if the sole reason why the pages are wired is because of
wired, managed mappings. Previously, unmapping the pages destroys these
wired, managed mappings, but does not reduce the pages' wire count.
Consequently, when the file is unmapped, the pages are not unwired
because the wired mapping has been destroyed. Moreover, when the vm
object is finally destroyed, the pages are leaked because they are still
wired. The fix is to reduce the pages' wired count by the number of
wired, managed mappings destroyed. To do this, I introduce a new pmap
function pmap_page_wired_mappings() that returns the number of managed
mappings to the given physical page that are wired, and I use this
function in vm_object_page_remove().
Reviewed by: tegge
MFC after: 6 weeks
communicate that it relates to (is called by) thread_alloc()
o Add cpu_thread_free() which is called from thread_free()
to counter-act cpu_thread_alloc().
i386: Have cpu_thread_free() call cpu_thread_clean() to
preserve behaviour.
ia64: Have cpu_thread_free() call mtx_destroy() for the
mutex initialized in cpu_thread_alloc().
PR: ia64/118024
opposed to what process. Since threads by default have teh name of the
process unless over-written with more useful information, just print the
thread name instead.
sys/dev/acpica/acpi.c rev 1.196 a while ago:
Grab Giant around calls to DEVICE_SUSPEND/RESUME in
acpi_SetSleepState().
If we are resuming non-MPSAFE drivers, they need Giant held for them.
This may fix some obscure suspend/resume problems. It has fixed keyrate
setting problems that were triggered by cardbus (MPSAFE) changing the
ordering for syscons resume (non-MPSAFE). Also, add some asserts that
Giant is held in our suspend/resume and shutdown methods.
Submitted by: Marko Zec
amd64 mechanism over. Instead of page table hackery that isn't
actually needed, just use 'struct pcpu __pcpu[MAXCPU]' for backing like
all the other platforms do. Get rid of 'struct privatespace' and a
while mess of #ifdef SMP garbage that set it up. As a bonus, this
returns the 4MB of KVA that we stole to implement it the old way.
This also allows you to read the pcpu data for each cpu when reading a
minidump.
Background information: Originally, pcpu stuff was implemented as having
per-cpu page tables and magic to make different data structures appear
at the same actual address. In order to share page tables, we switched
to using the GDT and %fs/%gs to access it. But we still did the evil
magic to set it up for the old way. The "idle stacks" are not used
for the idle process anymore and are just used for a few functions during
bootup, then ignored. (excercise for reader: free these afterwards).
This includes:
o mtree (for legal/intel_wpi)
o manpage for i386/amd64 archs
o module for i386/amd64 archs
o NOTES for i386/amd64 archs
Approved by: mlaier (comentor)
must be globally performed before calling any of the TLB invalidation
functions.
With one exception, on amd64, this requirement was already met. Fix this
one case. Also, as a clarification, change an existing atomic op into a
release. (Suggested by: jhb)
Reported and reviewed by: ups
MFC after: 3 days
silent NULL pointer dereference in the i386 and sparc64 pmap_pinit()
when the kmem_alloc_nofault() failed to allocate address space. Both
functions now return error instead of panicing or dereferencing NULL.
As consequence, vmspace_exec() and vmspace_unshare() returns the errno
int. struct vmspace arg was added to vm_forkproc() to avoid dealing
with failed allocation when most of the fork1() job is already done.
The kernel stack for the thread is now set up in the thread_alloc(),
that itself may return NULL. Also, allocation of the first process
thread is performed in the fork1() to properly deal with stack
allocation failure. proc_linkup() is separated into proc_linkup()
called from fork1(), and proc_linkup0(), that is used to set up the
kernel process (was known as swapper).
In collaboration with: Peter Holm
Reviewed by: jhb
warnings. Specifically, whenever vm_page_alloc(9) returned NULL to
get_pv_entry(), we issued a warning regardless of the number of pv
entries in use. (Note: The older pv entry allocator in RELENG_6 does
not have this problem.)
Reported by: Jeremy Chadwick
Eliminate the direct call to pagedaemon_wakeup() by get_pv_entry().
This was a holdover from earlier times when the page daemon was
responsible for the reclamation of pv entries.
MFC after: 5 days
refactored it to be a generic device.
Instead of being part of the standard kernel, there is now a 'nvram' device
for i386/amd64. It is in DEFAULTS like io and mem, and can be turned off
with 'nodevice nvram'. This matches the previous behavior when it was
first committed.
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
macros to treat the 'slice' field as a real part of the bootdev instead
of as hack that spans two other fields (adaptor (sic) and controller)
that are not used in any modern FreeBSD boot code.
MFC after: 1 week
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it turns out that most of these
calls actually end up being moved back to the thread version
when it's added. but we need to make this cosmetic change first.
I'd LOVE to do this rename in 7.0 so that we can eventually MFC the
new kthread_xxx() calls.
optimization level (-march=pentium-mmx for example) does not insert
intermediate ops which would trash the carry.
Change both sys/i386/i386/in_cksum.c[1] and sys/i386/include/in_cksum.h.
To my best understanding the same problem was addressed in rev. 1.16
of src/sys/i386/include/in_cksum.h for just a single function 3y ago.
Reviewed by: jhb
Submitted by: Zhouyi ZHOU <zhouzhouyi FreeBSD.org> (intial version of [1])
MFC after: 5 days
PR: 115678, 69257
support machines having multiple independently numbered PCI domains
and don't support reenumeration without ambiguity amongst the
devices as seen by the OS and represented by PCI location strings.
This includes introducing a function pci_find_dbsf(9) which works
like pci_find_bsf(9) but additionally takes a domain number argument
and limiting pci_find_bsf(9) to only search devices in domain 0 (the
only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are
changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order
to no longer report false positives when searching for siblings and
dupe devices in the same domain respectively.
Along with this change the sole host-PCI bridge driver converted to
actually make use of PCI domain support is uninorth(4), the others
continue to use domain 0 only for now and need to be converted as
appropriate later on.
Note that this means that the format of the location strings as used
by pciconf(8) has been changed and that consumers of <sys/pciio.h>
potentially need to be recompiled.
Suggested by: jhb
Reviewed by: grehan, jhb, marcel
Approved by: re (kensmith), jhb (PCI maintainer hat)
ways:
(1) Cached pages are no longer kept in the object's resident page
splay tree and memq. Instead, they are kept in a separate per-object
splay tree of cached pages. However, access to this new per-object
splay tree is synchronized by the _free_ page queues lock, not to be
confused with the heavily contended page queues lock. Consequently, a
cached page can be reclaimed by vm_page_alloc(9) without acquiring the
object's lock or the page queues lock.
This solves a problem independently reported by tegge@ and Isilon.
Specifically, they observed the page daemon consuming a great deal of
CPU time because of pages bouncing back and forth between the cache
queue (PQ_CACHE) and the inactive queue (PQ_INACTIVE). The source of
this problem turned out to be a deadlock avoidance strategy employed
when selecting a cached page to reclaim in vm_page_select_cache().
However, the root cause was really that reclaiming a cached page
required the acquisition of an object lock while the page queues lock
was already held. Thus, this change addresses the problem at its
root, by eliminating the need to acquire the object's lock.
Moreover, keeping cached pages in the object's primary splay tree and
memq was, in effect, optimizing for the uncommon case. Cached pages
are reclaimed far, far more often than they are reactivated. Instead,
this change makes reclamation cheaper, especially in terms of
synchronization overhead, and reactivation more expensive, because
reactivated pages will have to be reentered into the object's primary
splay tree and memq.
(2) Cached pages are now stored alongside free pages in the physical
memory allocator's buddy queues, increasing the likelihood that large
allocations of contiguous physical memory (i.e., superpages) will
succeed.
Finally, as a result of this change long-standing restrictions on when
and where a cached page can be reclaimed and returned by
vm_page_alloc(9) are eliminated. Specifically, calls to
vm_page_alloc(9) specifying VM_ALLOC_INTERRUPT can now reclaim and
return a formerly cached page. Consequently, a call to malloc(9)
specifying M_NOWAIT is less likely to fail.
Discussed with: many over the course of the summer, including jeff@,
Justin Husted @ Isilon, peter@, tegge@
Tested by: an earlier version by kris@
Approved by: re (kensmith)
In particular:
- smp_tlb_mtx is no longer used, so it is axed.
- smp rendezvous lock isn't really a leaf spin-mutex. Its bad placement in
the table, however, has been the source of a false positive LOR reporting
with the dt_lock. However, smp rendezvous lock would have had sched_lock
there for older lock, so it wasn't still a leaf lock.
- allpmaps is only used in ia32 architecture, so it is inserted in the
appropriate stub.
Addictionally:
- kse_zombie_lock is no longer present, so its definition is axed out.
- zombie_lock doesn't need to have an exported symbol, so just let's it be
declared as static.
Tested by: kris
Approved by: jeff (mentor)
Approved by: re
Together with the sys/i386/i386/trap.c rev. 1.306 it fixes the PR.
Submitted by: rdivacky
Suggested by: jhb
Sponsored by: Google Summer of Code 2007
PR: kern/77710
Approved by: re (kensmith)
3 arguments, but we had forgotten the second argument. Also make the
Linux statfs64 struct depend on the architecture because it has an
extra 4 bytes padding on amd64 compared to i386.
The three argument fix is from David Taylor, the struct statfs64
stuff is my fault. With this patch I can install i386 Linux matlab
on an amd64 machine.
Submitted by: David Taylor <davidt_at_yadt.co.uk>
Approved by: re (kensmith)
was used in assembler code in such a way that no unresolved relocation
records were generated, so ld didn't flag the problem. You can see
this with an 'nm' of the kernel. There will be 'U MAXCPU' on SMP systems.
The impact of this is that the intrcount/intrnames arrays do not have
the intended amount of space reserved. This could lead to interesting
problems due to the arrays being present in the middle of kernel code.
An overflow would be rather interesting as executable code would be used
as per-cpu incrementing interrupt counters.
This fixes it for now by exporting MAXCPU to the assembler. A better fix
might be to define these data structures in C - they're only referenced
in the kernel from C code these days anyway.
Approved by: re (kensmith)
- p_sflag was mostly protected by PROC_LOCK rather than the PROC_SLOCK or
previously the sched_lock. These bugs have existed for some time.
- Allow swapout to try each thread in a process individually and then
swapin the whole process if any of these fail. This allows us to move
most scheduler related swap flags into td_flags.
- Keep ki_sflag for backwards compat but change all in source tools to
use the new and more correct location of P_INMEM.
Reported by: pho
Reviewed by: attilio, kib
Approved by: re (kensmith)
topology foo functions.
Working at the patch for topology problems in ia32/amd64 evicted some
problems regarding functions ordering in the SI_SUB_CPU family of
SYSINIT'ed subsystems.
In order to avoid problems with new modified to involved functions, a
correct ordering is not semantically specified for SI_SUB_CPU functions
(for a larger view of the issue please visit:
http://lists.freebsd.org/pipermail/freebsd-current/2007-July/075409.html )
Discussed with: peter
Tested by: kris, Rui Paulo <rpaulo@FreeBSD.org>
Approved by: jeff
Approved by: re
When any PnP device exists, isa_release_resource() is called with no
activated resource. So a bushandle is not allocated yet.
Approved by: re (kensmith)
with Linux 2.6 emulation. This shall be reimplemented once FreeBSD gets
native scheduler affinity syscalls.
Submitted by: rdivacky
Reviewed by: jkim
Sponsored by: Google Summer of Code 2007
Approved by: re (kensmith)
longer create a pv entry for that mapping. (The two exceptions are
mappings into the kernel's exec and pipe submaps.) Consequently, there is
no reason for get_pv_entry() to dig deep into the free page queues, i.e.,
use VM_ALLOC_SYSTEM, by default. This revision changes get_pv_entry() to
use VM_ALLOC_NORMAL by default, i.e., before calling pmap_collect() to
reclaim pv entries.
Approved by: re (kensmith)
and newer CPUs (including Core 2 and Core / Core 2 based Xeons). The
driver attaches to each cpu device and creates a sysctl node in that
device's sysctl context (dev.cpu.N.temperature). When invoked, the
handler binds to the appropriate CPU to ensure a correct reading.
Submitted by: Rui Paulo <rpaulo@fnop.net>
Sponsored by: Google Summer of Code 2007
Tested by: des, marcus, Constantine A. Murenin, Ian FREISLICH
Approved by: re (kensmith)
MFC after: 3 weeks
cr0-4, etc. Support should be added for other platforms that have a
different set of registers for system use.
Loosely based on: OpenBSD
Approved by: re
cpu_start_mp(). This is after we have read the cpuid registers to
calculate the hyperthreading_cpus value for the sysctl that enables or
disables hyperthread cores. Change mp_topology() to use that information
rather than trying to do it itself.
This solves the problem of ULE being incorrectly told that dual core
Athlon64 X2 or Operton cpus are hyperthreading cores. At the very least,
we now have a single piece of code to identify hyperthreading.
Obtained from: jhb
Approved by: re (kensmith)
day of week field correctly, or they remember bad values that are
written into the day of week field. For this reason, ignore the day
of week field when reading the clock on i386 rather than bailing if
it is set incorrectly.
Problems were seen on a number of platforms, including VMWare, qemu,
EPIA ME6000, Epox-3PTA and ABIT-SL30T.
This is a slightly different fix to that proposed by Ted in his PR,
but the same basic idea.
PR: 111117
Submitted by: Ted Faber <faber@lunabase.org>
Approved by: re (rwatson)
MFC after: 3 weeks
value, then we would use a negative index into the trap_msg[] array
resulting in a nested page fault. Make the 'type' variable holding the
trap number unsigned to avoid this.
MFC after: 2 weeks
Approved by: re (rwatson)
print a one line error message. Add some comments on not being able to
trust the day of week field (I'll act on these comments in a follow up
commit).
Approved by: re
MFC after: 3 weeks
- When a LDT entry changes, the old one is freed while it is still
referenced by gdt and ldtr. This can lead to disruptive behaviours in
particular on SMP machines.
- When a LDT entry changes, it is assumed that the only one entity sharing
the same LDT are threads in the same proc. It doesn't take in account
edge cases where two processes share the same VM (rfork'ed ones, for
example).
This patch addresses these two problems and addictionally it fixes the
usage of refcount switching back it to the old manually-grown refcount
(since in this case would be faster).
Diagnosed by: tegge
Tested by: pho (a former version)
Reviewed by: kib
Approved by: jeff (mentor)
Approved by: re
the 7.0 timeframe.
This is needed because I4B is not locked and NET_NEEDS_GIANT goes away.
The plan is to lock I4B and bring everything back for 7.1.
Approved by: re (kensmith)
holding the page queues lock. Thus, the page table pages released by
pmap_remove() and pmap_remove_pages() can be freed after the page queues
lock is released.
Approved by: re (kensmith)
Improvements:
* /etc/rc.suspend,rc.resume are always run, no matter the source of the
suspend request (user or kernel, apm or acpi)
* suspend now requires positive user acknowledgement. If a user program
wants to cancel the suspend, they can. If one of the user programs
hangs or doesn't respond within 10 seconds, the system suspends anyway.
* /dev/apm is clonable, allowing multiple listeners for suspend events.
In the future, xorg-server can use this to be informed about suspend
even if there are other listeners (i.e. apmd).
Changes:
* Two new ACPI ioctls: REQSLPSTATE and ACKSLPSTATE. Request begins the
process of suspending by notifying all listeners. acpi is monitored by
devd(8) and /dev/apm listener(s) are also counted. Users register their
approval or disapproval via Ack. If anyone disapproves, suspend is vetoed.
* Old user programs or kernel modules that used SETSLPSTATE continue to
work. A message is printed once that this interface is deprecated.
* acpiconf gains the -k flag to ack the suspend request. This flag is
undocumented on purpose since it's only used by /etc/rc.suspend. It is
not intended to be a permanent change and will be removed once a better
power API is implemented.
* S5 (power off) is no longer supported via acpiconf -s 5 or apm -z/-Z.
This restores previous behavior of halt/shutdown -p being the interface.
* Miscellaneous improvements to error reporting
Approved by: re
of the magic string is passed in a 32-bit register, we can't use high
memory in the PAE case. This also eliminates a use of vtophys().
Tested by: Jeff Shimbo <jts767 / gmail.com>
MFC after: 1 week
