trampoline page table. Also do some style cleanup.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D7934
The fill pattern was previously an ia64 instruction sequence. Presumably
ia64's linker script was copied as a starting point.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This commit adds drivers for Alpine Cache Coherency Unit
and North Bridge Service whose task is to configure
the system fabric and enable cache coherency.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Reviewed by: wma
Differential Revision: https://reviews.freebsd.org/D7565
This is required on my system, which loads nvidia, vmm, and zfs, and 48M is
no longer enough for that. nvidia-driver's recent update increased its size
by several megabytes.
Reviewed by: jhb
MFC after: 1 week
not page aligned. To do this, use the ld script gnu ld installs on my
system.
This is imperfect: LDFLAGS_BIN and LD_FLAGS_BIN describe different
things. The loader script could be better named and take into account
other architectures. And having two different mechanisms to do
basically the same thing needs study. However, it's blocking forward
progress on lld, so I'll work in parallel to sort these out.
Differential Revision: https://reviews.freebsd.org/D7409
Reviewed by: emaste
The linker script CONSTRUCTORS keyword is only meaningful "when linking
object file formats which do not support arbitrary sections, such as
ECOFF and XCOFF"[1] and is ignored for other object file formats.
LLVM's lld does not yet accept (and ignore) CONSTRUCTORS, so just remove
CONSTRUCTORS from the linker script as it has no effect.
[1] https://sourceware.org/binutils/docs/ld/Output-Section-Keywords.html
RISC-V cpu implementations.
o Update RocketChip device tree source (DTS).
We now support latest verison of RocketChip synthesized on
Xilinx FPGA (Zedboard).
RocketChip is an implementation of RISC-V processor written on
Chisel hardware construction language.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
In some Dell systems and usb stick combinations, it is found that
int13 AH=08 is reporting back bad sector information, preventing the
boot.
This update is allowing bd_int13probe() to use extended info call to
build disk properties.
It also can happen the total sectors count from extended info may be
wrong, in such case, the CHS data is used to calculate total sectors.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D7718
Add a new 'netproto' variable which can be set for now to
NET_TFTP or NET_NFS (default to NET_NONE)
From the dhcp options if one sets the root-path option to:
"ip:path", the loader will consider it is booting over NFS
(meaning same behaviour as the default current behaviour)
if the dhcp option "tftp server address" is set (option 150)
the loader will consider it is booting over tftpfs, it will then
consider the root-path options with 2 possible case
1. "path" then the IP of the tftp server will be the one passed by
the option 150, and the files will be retrieved under "path" on the tftp
server
2. "ip:path" then the IP of the tftp server will be the one passed in
the option "overwritting the IP from the option 150.
We could not "abuse" the rootpath option in the form or tftp://ip:path because
this is already used for other purpose by iPXE preventing any chainload from
iPXE to the FreeBSD loader.
Given at each open(), the loader loops over all available filesystems and keep
the "best" error, we needed to prevent tftpfs to fallback on nfs and vice versa.
the tftpfs and nfs implementation in libstand now return EINVAL early if
'netproto' for that purpose.
Reviewed by: tsoome
Relnotes: yes
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D7628
something (perhaps in loader.rc.local) that can read in .conf files
after all the other .conf files have been read and override settings
in them. This is quite handy if the .conf file name is determined
while the loader is running, but might be generically useful for other
things. If this hook exists, call it, otherwise don't do anything.
Doing it in these functions ensures that this file is reliably
read. It also works around a defect in forth where s" isn't allowed
outside a function (well, in a compile context) leading to gross
workarounds if one were to hack loader.rc like:
: maybe-some-func s" some-func" sfind if execute else drop then ;
maybe-some-func
which somehow seems worse. Though I'm sure there's some clever forthy
way of doing that with a macro.
Sponsored by: Netflix, Inc
device argument to the stage-1 bootloader. In such cases, boot1 would
only try to read the entire device rather than checking for partitions.
Instead of panic'ing, fall back to reading the partitions as normal in
such situations. This was preventing boot of installed systems on some
versions of PowerKVM.
PR: kern/211599
MFC after: 2 days
can emulate efi_cons_poll(0 with a flag and caching the last key read with
ReadKeyStroke. This fixes the loader.efi countdown timer on Pine64 (and
other U-Boot + EFI using platforms).
Reviewed by: imp, manu
Differential Revision: https://reviews.freebsd.org/D7670
beyond the end of disk. r298900 added code to prevent this. Some BIOSes
cause significant delays if asked to read past end-of-disk.
We never trusted the BIOS to accurately report the sectorsize of disks
before and this set of changes. Unfortuately they interact badly with
the infamous >2TB wraparound bugs. We have a number of relatively-recent
machines in the FreeBSD.org cluster where the BIOS reports 3TB disks as 1TB.
With pre-r298900 they work just fine. After r298900 they stop working if
the boot environment attempts to access anything outside the first 1TB on
the disk. 'ZFS: I/O error, all block copies unavailable' etc. It affects
both UFS and ZFS if they try to boot from large volumes.
This change replaces the blind trust of the BIOS end-of-disk reporting
with a read-ahead clip to prevent reads crossing the of end-of-disk
boundary. Since 2^32 (2TB) size reporting truncation is not uncommon,
the clipping is done on 2TB aliases of the reported end-of-disk.
ie: a 3TB disk reported as 1TB has readahead clipped at 1TB, 3TB, 5TB, ...
as one of them is likely to be the real end-of-disk.
This should make the loader on these broken machines behave the same as
traditional pre-r298900 loader behavior, without disabling read-ahead.
PR: 212139
Discussed with: tsoome, allanjude
set later in the function. This fixes a potential NULL pointer dereference
found on arm64.
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
As the support for large blocks was enabled in loader zfs code, the
heap in userboot was left not changed, resulting with failure of detecting
and accessing zfs pools for bhyve virtual machines.
This fix does set the heap to use same amount of memory as the zfsloader
is using. To make it possible to test and verify loader functions, bhyve
is providing very useful option, but it also means, we like to keep feature
parity with [zfs]loader as close as possible.
PR: 212038
Reported by: dfh0522@gmail.com
Reviewed by: allanjude, grehan
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D7635
Allow netbooting on efi without having to setup any NFS server by rebuilding the
loader with LOADER_TFTP_SUPPORT like for the i386 pxeloader
Sponsored by: Gandi.net
strings provided by user/config files. This update is replacing sprintf with
snprintf for cases the command_errbuf is built from dynamic content.
PR: 211958
Reported by: ecturt@gmail.com
Reviewed by: imp, allanjude
Approved by: imp (mentor), allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D7563
Updated sha512 from illumos.
Using skein from freebsd crypto tree.
Since loader itself is using 64MB memory for heap, updated zfsboot to
use same, and this also allows to support zfs large blocks.
Note, adding additional features does increate zfsboot code, therefore
this update does increase zfsboot code to 128k, also I have ported gptldr.S
update to zfsldr.S to support 64k+ code.
With this update, boot1.efi has almost reached the current limit of the size
set for it, so one of the future patches for boot1.efi will need to
increase the limit.
Currently known missing zfs features in boot loader are edonr and gzip support.
Reviewed by: delphij, imp
Approved by: imp (mentor)
Obtained from: sha256.c update and skein_zfs.c stub from illumos.
Differential Revision: https://reviews.freebsd.org/D7418
Some defines needed for exporting serial numbers from the SMBIOS were
missed during integration of SMBIOS support in the EFI boot loader (r281138).
This is needed for getting the hostid set from the system hardware UUID.
PR: 206031
Submitted by: Thomas Eberhardt <sneakywumpus@gmail.com>
MFC after: 1 week
The only difference between 3 and 3B is the size of the RJ45 port.
And now we have a uboot port that expect pcduino3.dts to be present.
Reported by: imp
SMBIOS Type 1 fields:
smbios.system.sku - SKU Number (SMBIOS 2.4 and above)
smbios.system.family - Family (SMBIOS 2.4 and above)
Add kernel environment variables under smbios.planar for the following
SMBIOS Type 2 fields:
smbios.planar.tag - Asset Tag
smbios.planar.location - Location in Chassis
Reviewed by: jhb, grembo
Approved by: sjg (mentor)
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D7453
Machine privilege level was specially designed to use in vendor's
firmware or bootloader. We have implemented operation in machine
mode in FreeBSD as part of understanding RISC-V ISA, but it is time
to remove it.
We now use BBL (Berkeley Boot Loader) -- standard RISC-V firmware,
which provides operation in machine mode for us.
We now use standard SBI calls to machine mode, instead of handmade
'syscalls'.
o Remove HTIF bus.
HTIF bus is now legacy and no longer exists in RISC-V specification.
HTIF code still exists in Spike simulator, but BBL do not provide
raw interface to it.
Memory disk is only choice for now to have multiuser booted in Spike,
until Spike has implemented more devices (e.g. Virtio, etc).
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Uses of commas instead of a semicolons can easily go undetected. The comma
can serve as a statement separator but this shouldn't be abused when
statements are meant to be standalone.
Detected with devel/coccinelle following a hint from DragonFlyBSD.
MFC after: 1 month
On Zynq 256K-512K memory region is not accessible by all bus masters.
EHCI driver fails when trying to use it for DMA transfers. Patching
memory node does not help because ubldr overrides values there with
the ones obtained from u-boot. So as a workaround we just mark first
512K as reserved.
PR: 211484
Submitted by: Thomas Skibo <thoma555-bsd@yahoo.com>
MFC after: 3 days
