Commit Graph

332 Commits

Author SHA1 Message Date
Peter Wemm
810b4d751f Reconnect 'bktr' now that world won't (I hope) break again from it.
'make depend' was falling over in it before.
1999-09-28 07:28:59 +00:00
Peter Wemm
5e6016775c Make the bktr module build. The Makefile was badly mangled, including
leaving the ".c" out of most of the SRCS= source files.
1999-09-28 07:23:59 +00:00
Warner Losh
7cbb6373b9 /tmp/cvswGS523 1999-09-28 02:45:34 +00:00
Peter Wemm
f274c85d8b Zap some unused echo "#define NFOO 1" > foo.h style defunct stuff. 1999-09-27 01:04:44 +00:00
Peter Wemm
972c1f6945 Don't set an unused make(1) variable (NBPF) 1999-09-27 01:00:20 +00:00
Peter Wemm
8182b2bfce bktr (as a module) doesn't build. 1999-09-27 00:56:32 +00:00
Peter Wemm
26fe698c67 Don't generate 'bpf.h' since it's not used. 1999-09-27 00:39:29 +00:00
Peter Wemm
18b039eb04 Don't generate 'bpf.h' since it's not used. 1999-09-27 00:34:02 +00:00
Roger Hardiman
450880b4e0 Update to use new Bt848 driver 1999-09-26 22:13:06 +00:00
Peter Wemm
18e2e348fb Minor tidy up of PPP_FILTER and NBPF stuff. Don't generate bpf.h in the
module and don't #include "bpf.h".
1999-09-26 18:44:29 +00:00
Brian Feldman
9811e1f1a1 Add phk's m(4) Memory Disk driver as a KLD. I don't believe it
works properly after unloading, however.
1999-09-22 21:28:19 +00:00
Roger Hardiman
fdc2eae112 Use new location of Bt848 driver.
Remove NPCI generation as the driver no longer checks for NPIC > 0
1999-09-22 08:31:05 +00:00
Bill Paul
1088f6c7c1 Spruce up the ADMtek driver: conver to newbus, miibus and add support
for the AN985 "Centaur" chip, which is apparently the next genetation
of the "Comet." The AN985 is also a tulip clone and is similar to the
AL981 except that it uses a 99C66 EEPROM and a serial MII interface
(instead of direct access to the PHY registers).

Also updated various documentation to mention the AN985 and created
a loadable module.

I don't think there are any cards that use this chip on the market yet:
the datasheet I got from ADMtek has boxes with big X's in them where the
diagrams should be, and the sample boards I got have chips without any
artwork on them.
1999-09-22 05:07:51 +00:00
David E. O'Brien
40ec3caac8 Change the name of the installed KLM to contain a leading "if_".
Except for miibus which is now installed as miibus.ko.

Discussed by:	msmith, peter, and wpaul
1999-09-20 06:11:48 +00:00
Bill Paul
977f4ed148 RealTek driver module wasn't being built; add it to the Makefile. 1999-09-19 23:19:59 +00:00
Bill Paul
ae3b8c19b1 Convert the VIA Rhine driver to miibus. 1999-09-19 22:03:31 +00:00
Dag-Erling Smørgrav
58e21863da Clean up and reorder. 1999-09-08 19:17:15 +00:00
Nick Hibma
fe3cac87c1 1) s/mod(un)?load/kld$1load/
2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables
(KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the
Makefile of the ATAPI module

3) textual fixups
1999-09-06 20:11:59 +00:00
Bill Paul
e5a9fd5435 This commit adds driver support for PCI fast ethernet NICs based on
the Davicom DM9100 and DM9102 chipsets, including the Jaton Corporation
XPressNet. Datasheet is available from www.davicom8.com.

The DM910x chips are still more tulip clones. The API is reproduced
pretty faithfully, unfortunately the performance is pretty bad. The
transmitter seems to have a lot of problems DMAing multi-fragment
packets. The only way to make it work reliably is to coalesce transmitted
packets into a single contiguous buffer. The Linux driver (written by
Davicom) actually does something similar to this. I can't recomment this
NIC as anything more than a "connectivity solution."

This driver uses newbus and miibus and is supported on both i386
and alpha platforms.
1999-09-06 06:14:30 +00:00
Bill Paul
bbf7ca2249 Add a driver for the AMD AM79c873 10/100 PHY. By some strange coincidence,
this PHY and the Davicom DM9101 have exactly the same register definitions.
One of them is probably a clone of the other. I'm not sure which.

This is needed for the Davicom DM9102 10/100 PCI ethernet driver which
will be committed shortly.
1999-09-06 05:27:55 +00:00
Bill Paul
9555e59a1e This commit adds driver support for the Silicon Integrated Systems
SiS 900 and SiS 7016 PCI fast ethernet chipsets. Full manuals for the
SiS chips can be found at www.sis.com.tw.

This is a fairly simple chipset. The receiver uses a 128-bit multicast
hash table and single perfect entry for the station address. Transmit and
receive DMA and FIFO thresholds are easily tuneable. Documentation is
pretty decent and performance is not bad, even on my crufty 486. This
driver uses newbus and miibus and is supported on both the i386 and
alpha architectures.
1999-09-05 21:01:03 +00:00
David E. O'Brien
22167446c5 Install {ibcs2,svr4}.sh in /usr/sbin and not in /usr/bin.
related to PR:		13545
1999-09-05 05:19:08 +00:00
Bruce Evans
dd6898f64e Don't generate opt_debug_nullfs.h. It is no longer necessary.
Removed bogus definition of NULLFS
1999-09-04 12:40:07 +00:00
Bruce Evans
a5f3f7510a Backed out the quick fix in the previous commit. Depending on opt_ddb.h
was a mistake.  umapfs no longer depends on any options headers.
1999-09-04 12:01:32 +00:00
Marcel Moolenaar
48adcae922 Install linux.sh in /usr/sbin and not in /usr/bin.
PR: 13545
Submitted by: Jose M. Alcaide <jose@we.lc.ehu.es>
1999-09-03 07:15:38 +00:00
Mark Newton
c2de70091b Add MAINTAINER line 1999-09-01 00:32:18 +00:00
Bill Paul
59519ca74f Convert the RealTek 8139 driver to newbus and miibus in one swell foop.
Also set it up to be compiled as a module.
1999-08-31 14:45:51 +00:00
Bill Paul
a4f02d20ed Add a driver for the internal PHY in the RealTek 8139. 1999-08-31 14:43:30 +00:00
Roger Hardiman
ec4d750134 add vnode_if.h 1999-08-31 11:13:47 +00:00
Bill Paul
4ae17070a2 Convert the Adaptec and Winbond drivers to miibus. 1999-08-30 23:08:32 +00:00
Bruce Evans
de5104ae7c "Fixed" my recent world breakage (umap_subr.c now includes opt_ddb.h).
Fixed some style bugs, especially the bogus definition of UMAPFS.
1999-08-30 03:26:45 +00:00
Bill Paul
1ef8fbeabf Convert the 3Com XL driver to miibus. This one is a little tricky
due to the fact that there are non-MII cards supported by the same
driver and I don't have all of the cards available for testing. There's
also the 3c905B-COMBO which has MII, AUI and BNC media ports all in one
package. Supporting the COMBO is difficult because we have to add the
10base5 and 10base2 media types to the same ifmedia struct as the
MII-attached types, however there is no way to force the miibus and
child PHYs into existence before xl_attach() completes, so there is
no ifmedia struct available in xl_attach(). What we do inistead is
use the mediainit method as a callback: when a child PHY is attached,
it calls the miibus mediainit routine which selects a default media.
This routing also calls the NIC driver's mediainit method (if it
implements one) at which point we can safely add the other media
types.
1999-08-29 15:52:19 +00:00
Marcel Moolenaar
9e8b10d186 Add MAINTAINER and remove the unused COMPAT_LINUX and VM_STACK defines. 1999-08-28 09:04:21 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Bill Paul
b3bc7a4bb0 Fix path for miibus_if.m (mii > dev/mii); 1999-08-27 21:21:53 +00:00
Marcel Moolenaar
c6dfea0ebd Add sysctl variables for the Linuxulator. These reside under `compat.linux' as
discussed on current.

The following variables are defined (for now):

    osname (defaults to "Linux")
        Allow users to change the name of the OS as returned by uname(2),
        specially added for all those Linux Netscape users and statistics
        maniacs :-) We now have what we all wanted!

    osrelease (defaults to "2.2.5")
        Allow users to change the version of the OS as returned by uname(2).
        Since -current supports glibc2.1 now, change the default to 2.2.5
        (was 2.0.36).

    oss_version (defaults to 198144 [0x030600])
        This one will be used by the OSS_GETVERSION ioctl (PR 12917) which I
        can commit now that we have the MIB. The default version number is the
        lowest version possible with the current 'encoding'.

A note about imprisoned processes (see jail(2)):
  These variables are copy-on-write (as suggested by phk). This means that
  imprisoned processes will use the system wide value unless it is written/set
  by the process. From that moment on, a copy local to the prison will be
  used.

A note about the implementation:
  I choose to add a single pointer to struct prison, because I didn't like the
  idea of changing struct prison every time I come up with a new variable. As
  a side effect, the extra storage is only needed when a variable is set from
  within the prison. This also minimizes kernel bloat when the Linuxulator is
  not used; both compiled in or as a module.

Reviewed by: bde (first version only) and phk
1999-08-27 19:47:41 +00:00
Bill Paul
d0dca9afa4 Update these Makefiles; add mlphy and tlphy to the mii module, add
miibus_if.h to tl module's dependencies.
1999-08-27 19:45:19 +00:00
Greg Lehey
2de219e97f Change asf function to use the new name of the list in kern_linker.c.
See revision 1.35 of sys/kern/kern_linker.c.
1999-08-26 04:01:37 +00:00
Bill Paul
23e4757cd7 This commit adds device driver support for the Sundance Technologies ST201
PCI fast ethernet controller. Currently, the only card I know that uses
this chip is the D-Link DFE-550TX. (Don't ask me where to buy these: the
only cards I have are samples sent to me by D-Link.)

This driver is the first to make use of the miibus code once I'm sure
it all works together nicely, I'll start converting the other drivers.

The Sundance chip is a clone of the 3Com 3c90x Etherlink XL design
only with its own register layout. Support is provided for ifmedia,
hardware multicast filtering, bridging and promiscuous mode.
1999-08-21 18:34:58 +00:00
Bill Paul
d00275330d This commit adds support for the NetBSD MII abstraction layer and
MII-compliant PHY drivers. Many 10/100 ethernet NICs available today
either use an MII transceiver or have built-in transceivers that can
be programmed using an MII interface. It makes sense then to separate
this support out into common code instead of duplicating it in all
of the NIC drivers. The mii code also handles all of the media
detection, selection and reporting via the ifmedia interface.

This is basically the same code from NetBSD's /sys/dev/mii, except
it's been adapted to FreeBSD's bus architecture. The advantage to this
is that it automatically allows everything to be turned into a
loadable module. There are some common functions for use in drivers
once an miibus has been attached (mii_mediachg(), mii_pollstat(),
mii_tick()) as well as individual PHY drivers. There is also a
generic driver for all PHYs that aren't handled by a specific driver.
It's possible to do this because all 10/100 PHYs implement the same
general register set in addition to their vendor-specific register
sets, so for the most part you can use one driver for pretty much
any PHY. There are a couple of oddball exceptions though, hence
the need to have specific drivers.

There are two layers: the generic "miibus" layer and the PHY driver
layer. The drivers are child devices of "miibus" and the "miibus" is
a child of a given NIC driver. The "miibus" code and the PHY drivers
can actually be compiled and kldoaded as completely separate modules
or compiled together into one module. For the moment I'm using the
latter approach since the code is relatively small.

Currently there are only three PHY drivers here: the generic driver,
the built-in 3Com XL driver and the NS DP83840 driver. I'll be adding
others later as I convert various NIC drivers to use this code.

I realize that I'm cvs adding this stuff instead of importing it
onto a separate vendor branch, but in my opinion the import approach
doesn't really offer any significant advantage: I'm going to be
maintaining this stuff and writing my own PHY drivers one way or
the other.
1999-08-21 17:40:53 +00:00
Mike Pritchard
3eaf789e97 Sort xrefs.
Submitted by:	Alexey Zelkin <phantom@cris.net>
1999-08-19 00:10:37 +00:00
Greg Lehey
efabbb14f9 Bring up to date to work with -CURRENT. 1999-08-14 04:56:14 +00:00
Bill Paul
8674aa45c7 Convert the Winbond driver to newbus and have it compiled as a module. 1999-08-10 21:09:12 +00:00
Bill Paul
08339b4fa4 Convert the VIA Rhine driver to newbus and set it up to be compiled as
a module. Also modified the code to work on FreeBSD/alpha and added
device vr0 to the alpha GENERIC config.

While I was in the neighborhood, I noticed that I was still using
#define NFPX 1 in all of the Makefiles that I'd copied from the fxp
module. I don't really use #define Nfoo X so it didn't matter, but
I decided to customize this correctly anyway.
1999-08-10 17:15:20 +00:00
Greg Lehey
d50c8ea07f Add vinumraid5.c to list of sources. 1999-08-07 08:35:54 +00:00
Nik Clayton
bf9c09f910 "Linux emulator" -> "Linux image activator"
PR:             docs/12882
Submitted by:   des
1999-08-04 18:58:37 +00:00
Mark Newton
1cd528f787 Initial checkin 1999-07-30 12:50:48 +00:00
Mark Newton
60037843ce Clarify use of the 'streams' pseudo-device (i.e.: static or kld).
Trust me, this stuff will be in a real manpage before 4.0 ships :-)
1999-07-30 12:46:16 +00:00
Bill Paul
74432d0d13 Add a module Makefile for the PNIC driver. 1999-07-28 02:21:56 +00:00
Bill Paul
691c152864 This commit adds device driver support for Adaptec Duralink PCI fast
ethernet controllers based on the AIC-6915 "Starfire" controller chip.
There are single port, dual port and quad port cards, plus one 100baseFX
card. All are 64-bit PCI devices, except one single port model.

The Starfire would be a very nice chip were it not for the fact that
receive buffers have to be longword aligned. This requires buffer
copying in order to achieve proper payload alignment on the alpha.
Payload alignment is enforced on both the alpha and x86 platforms.
The Starfire has several different DMA descriptor formats and transfer
mechanisms. This driver uses frame descriptors for transmission which
can address up to 14 packet fragments, and a single fragment descriptor
for receive. It also uses the producer/consumer model and completion
queues for both transmit and receive. The transmit ring has 128
descriptors and the receive ring has 256.

This driver supports both FreeBSD/i386 and FreeBSD/alpha, and uses newbus
so that it can be compiled as a loadable kernel module. Support for BPF
and hardware multicast filtering is included.
1999-07-25 04:32:50 +00:00