Commit Graph

56145 Commits

Author SHA1 Message Date
Sheldon Hearn
de29595584 Replace the full path to sysinstall with a standard manual page
reference.  The sysinstall binary is now in root's standard PATH,
so there's no need for explicit pathing, and there's some value
in a manual page reference.
2001-01-29 08:22:21 +00:00
Matthew Dillon
2a9737202a This patch reestablishes the spec_fsync() guarentee that synchronous
fsyncs, which typically occur during unmounting, will drain all dirty
buffers even if it takes multiple passes to do so.  The guarentee was
mangled by the last patch which solved a problem due to -current disabling
interrupts while holding giant (which caused an infinite spin loop waiting for
I/O to complete).  -stable does not have either patch, but has a similar
bug in the original spec_fsync() code which is triggered by a bug in the
softupdates umount code, a fix for which will be committed to -current
as soon as Kirk stamps it.  Then both solutions will be MFC'd to -stable.

-stable currently suffers from a combination of the softupdates bug and
a small window of opportunity in the original spec_fsync() code, and -stable
also suffers from the spin-loop bug but since interrupts are enabled the
spin resolves itself in a few milliseconds.
2001-01-29 08:19:28 +00:00
Peter Wemm
52a90b77f9 change 'count eisa' to 'optional eisa' and update the only consumer
of 'NEISA' - userconfig.c.
While there, send some defunct code to the file history.
2001-01-29 08:19:02 +00:00
Jeroen Ruigrok van der Werven
f043ac0627 Add static dependency to libisc to get isc_movefile().
Submitted by:	Munehiro Matsuda <haro@kubota.co.jp>
2001-01-29 07:56:34 +00:00
Poul-Henning Kamp
896dba5a0c Fix a braino in ccd's clone routine.
Submitted by:	tegge
2001-01-29 06:18:14 +00:00
Kenneth D. Merry
75fab00593 Back out rev 1.102. The IBM DNES drives work fine for me, jedgar and other
folks.

My guess is that reducing the number of tags is just masking the real
problem for the PR submitter.  I'll re-open the PR and see if I can work
with the submitter to diagnose the problem.

PR:		21139
2001-01-29 05:33:14 +00:00
Daniel Eischen
221b1e69c5 _exit in libc is now __sys_exit not __sys__exit.
Add another check for thread library initialization (jdp, we
really need a way to get _thread_init called at program start
before any constructors are run).
2001-01-29 03:24:23 +00:00
Daniel Eischen
c37592a194 Clean up syscall generation in libc by removing HIDDEN_SYSCALLS
and treating (almost) all system calls the same way:

	__sys_foo - actual syscall
	foo, _foo - weak definitions to __sys_foo

Change PSEUDO syscalls (currently only _exit and _getlogin) to
be __sys_foo (T) and _foo (W).

Add $FreeBSD$ to a few files to satisfy commitprep.

Suggested by:	bde
2001-01-29 03:23:46 +00:00
Marcel Moolenaar
5bcc1e51a0 Don't hard-code alignment and data declarations valid for 64-bit
machines (duh!). This was one reason why this script broke on
i386. The other being that on i386 sections did not have the
proper alignment. This has been fixed in sys/sys/linker_set.h.
2001-01-29 01:55:54 +00:00
Marcel Moolenaar
d2d42f89d5 o Add explicit alignment to linker set definitions. On i386, data
declarations will not be aligned by default.
o  Remove the alignment work-around for alpha. Our current alpha
   as(1) does not assume alignment after section switching, nor
   does the ia64 as(1).
2001-01-29 01:46:50 +00:00
Brian Somers
37b8a5c7bd Only remove socket files with ``set server open''.
Only show the mask in ``show bundle'' when it's been specified.
Complain about unexpected arguments after ``set server {none,open,closed}''
Log re-open failures as warnings rather than phase messages.
Fix some markup for the ``set server'' man page description.
2001-01-29 01:35:06 +00:00
Brian Somers
4834b77d04 Ignore leading witespace in the string given to PacketAliasProxyRule(). 2001-01-29 00:30:01 +00:00
Jeroen Ruigrok van der Werven
b54a8d8a2e Add static dependency on libisc.a to get isc_movefile() on which named
now depends.  This keeps named the same as before the import, that is: only
linking against libc dynamically, at a little space increase, which might
be due to the source code changes anyway.  Very neglectable space
difference.

Some people might dub it a hack.  It will do for now at least.
2001-01-28 23:21:00 +00:00
Jeroen Ruigrok van der Werven
dd46afd299 Update Makefile for the new sources. 2001-01-28 23:14:16 +00:00
Jeroen Ruigrok van der Werven
e11258ca5f Resolve conflicts after import. 2001-01-28 23:06:48 +00:00
Jeroen Ruigrok van der Werven
93841e4d67 This commit was generated by cvs2svn to compensate for changes in r71756,
which included commits to RCS files with non-trunk default branches.
2001-01-28 23:00:22 +00:00
Jeroen Ruigrok van der Werven
98ff752a5e Virgin import of BIND v8.2.3-REL 2001-01-28 23:00:22 +00:00
Brian Somers
021996f177 Don't pass PacketAliasProxyRule() a buffer with leading whitespace as it
can't handle it.
2001-01-28 21:56:27 +00:00
Brian Somers
f169f2f020 Call trimdomain properly for ip4 addresses.
PR:	24659
realhostname_sa() stuff submitted by: Jim.Pirzyk@disney.com
2001-01-28 21:51:25 +00:00
Kenneth D. Merry
0212e4b63b Fix region code reporting.
Reported by:	Andrew Gordon <arg@arg1.demon.co.uk>
2001-01-28 21:43:17 +00:00
Marcel Moolenaar
8e8cae2b0c Revert previous commit. I messed up my testing. 2001-01-28 21:24:05 +00:00
Poul-Henning Kamp
bfa0b2984d Use \a instead of \007 for making noise.
Submitted by:	"Jason Smethers" <jsmethers@pdq.net>
2001-01-28 21:21:37 +00:00
Poul-Henning Kamp
c93849206e Remove devstat entries in mddelete()
Spotted:	tegge
2001-01-28 20:55:55 +00:00
Poul-Henning Kamp
3b42f2f3bb Duh, the version of mdconfig.c I committed came from the wrong machine.
Commit the right version, but without the -b option which is too evil
for the present.

Remove -b and preload from the manpage as well.
2001-01-28 20:17:46 +00:00
Dag-Erling Smørgrav
7105f09c38 Revert part of previous commit and initialize locale_nroff to " -Tascii"
so man(1) works properly when no locale is set.

Spotted by:	bde
2001-01-28 20:17:14 +00:00
Poul-Henning Kamp
353f4b3966 Don't specify fragment size, it autosizes from the sectorsize.
Remember to set mode 1777 on /tmp

Submitted by:	mjacob
2001-01-28 20:03:02 +00:00
Gerard Roudier
3c9013e257 A couple of chip errata work-arounds refined:
- When used on a 33MHz PCI BUS, the 53C1010-66 revision 0
  requires extra clocks to be inserted in data out phase.
  Revision 1 is fixed.
- The 53C1010-33 revision 1 requires internal cycles to be
  disabled due to possible contentions on IO registers.
  Revision 2 is fixed.
Fix:
- The probing of HVD from GPIO3 bit by the driver was reversed.
  The driver could misprobe the bus mode of a 825 or 875 chip
  that was not previously initialized (no BIOS for example).
2001-01-28 19:58:21 +00:00
Poul-Henning Kamp
73cee67c0e Remove an outdated DEVFS non-description. 2001-01-28 19:32:23 +00:00
Wilko Bulte
4a5e0673ab Document which options to use for API UP1[01]00 2001-01-28 19:21:46 +00:00
Jake Burkholder
07ce8269b1 Clear intr_nesting_level when an interrupt thread has no more
handlers and wants to exit, so it doesn't panic in exit1()
which malloc()s with M_WAITOK.

Reported by:	Bob Bishop <rb@gid.co.uk>
2001-01-28 17:20:11 +00:00
Julian Elischer
d30293b3ff Add a new distribution algorythm to the 'one2many' node type.
The new method is 'flood' (in addition to the old round-robin)
in which incoming packets are sent to more than one outgoing hook.
(I'm not sure what Rogier is using this for but it seems generally useful
and isn't much extra)

Submitted by:   Rogier R. Mulhuijzen (drwilco@drwilco.net )
2001-01-28 15:37:06 +00:00
KATO Takenori
9ec492e57b Merged from sys/i386/isa/npx.c revisions 1.88 and 1.89. 2001-01-28 12:31:03 +00:00
KATO Takenori
c30d5afab4 Synced with sys/i386/i386/machdep.c revision 1.436. 2001-01-28 11:06:28 +00:00
Wilko Bulte
f0e20c106f API UP1100 mainboard has been verified to work. 2001-01-28 10:09:17 +00:00
Kris Kennaway
593605c60e Finish cleaning up the error reporting (standardize on err*()/warn*())
and fix some overflows.

Submitted by:   Mike Heffner <mheffner@vt.edu>
2001-01-28 09:20:47 +00:00
Marcel Moolenaar
cd682c042d Add gd_witness_spin_check. 2001-01-28 08:06:50 +00:00
Marcel Moolenaar
079c9adfc4 Fix typo. 2001-01-28 08:05:55 +00:00
Marcel Moolenaar
136345c019 Improve kernel bootstrapping:
o  Use objdump instead of gensetdefs(1) to build the linker sets.
o  Allow overriding of nm and objdump in resp. genassym.sh and
   gensetdefs.pl for non-native toolchains.

Reviewed by: arch
Perl improvements: Jos Backus <josb@cncdsl.com>, benno
2001-01-28 06:39:56 +00:00
Bosko Milekic
84e11fbc2e Move the setting of curproc to idleproc up earlier in ap_init(). The
problem is that a mutex lock, prior to this change, is acquired before
the curproc is set to idleproc, so we mess ourselves up by calling
the mutex lock routine with curproc == NULL.

Moving it up after the aps_ready spin-wait has us hopefully setting it
after idleproc is setup.

Solved by: jake (the allmighty) :-)
2001-01-28 03:41:01 +00:00
Tor Egge
48bed92485 Defer assignment of low level interrupt handlers for PCI interrupts
described in the MP table until something asks for the interrupt number
later on.
2001-01-28 01:07:54 +00:00
Will Andrews
99557a7988 De-__P()-ify
Reviewed by:	markm
2001-01-28 00:35:40 +00:00
Will Andrews
d8a3fbd50d BDECFLAGS: constify; use proper types. Add $FreeBSD$, clean up #ifndef lint.
Reviewed by:	markm
2001-01-28 00:34:29 +00:00
Dag-Erling Smørgrav
9fa2ef3da2 Remove an assertion I forgot to remove in the previous commit: sbuf_len()
may now be called with an unfinished sbuf.
For consistency, copy the related comment from sbuf_delete() to sbuf_clear()
and sbuf_len().
2001-01-28 00:33:58 +00:00
Dag-Erling Smørgrav
ea48868bf6 Add MLINKS for sbuf_clear() and sbuf_overflowed(). 2001-01-28 00:19:10 +00:00
Dag-Erling Smørgrav
e499b74df0 Document the changes in subr_sbuf.c rev. 1.2. 2001-01-28 00:18:54 +00:00
Dag-Erling Smørgrav
4dc1413915 Add sbuf_clear() and sbuf_overflowed().
Move the helper macros from sbuf.h to sbuf.c
Use ints instead of size_ts.
Relax the requirements for sbuf_finish(): it is now possible to finish an
overflowed buffer.
Make sbuf_len() return -1 instead of 0 if the sbuf overflowed.

Requested by:	gibbs
2001-01-28 00:13:01 +00:00
Wilko Bulte
45e8c4727d Document API UP1100 mainboard which is reported to work fine with FreeBSD.
UP1100 owners are invited to comment on the info provided here.
2001-01-27 21:34:33 +00:00
Andrew Gallatin
28c039e747 The API UP1100 is close enough to a UP1000 that FreeBSD just works on it, so
document that fact.

Thanks to Peter Petrakis <ppetrakis@alphalinux.org> for doing a test boot.
2001-01-27 20:56:00 +00:00
Justin T. Gibbs
64a3876fef Update Copyright notices for new year. (should have been in last commit). 2001-01-27 20:54:24 +00:00
Dag-Erling Smørgrav
0448bdfcb8 Make an effort to actually pass the correct device to groff. 2001-01-27 19:17:40 +00:00