Recent binutils considered the .gnu.warning.symbol section as a fatal error when
run with --fatal-warnings which makes any users of "insecure" functions from
libc failing to build with recent binutils.
Introduce a new macro: LD_FATAL_WARNINGS=no to run ld(1) with
--no-fatal-warnings for the users of "insecure" functions
Differential Revision: https://reviews.freebsd.org/D1320
A _NEW flag passed to _init_flags() to avoid check for double-init.
Differential Revision: https://reviews.freebsd.org/D1208
Reviewed by: jhb, wblock
MFC after: 1 Month
for counter mode), and AES-GCM. Both of these modes have been added to
the aesni module.
Included is a set of tests to validate that the software and aesni
module calculate the correct values. These use the NIST KAT test
vectors. To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors. Using a port
is necessary as the test vectors are around 25MB.
All the man pages were updated. I have added a new man page, crypto.7,
which includes a description of how to use each mode. All the new modes
and some other AES modes are present. It would be good for someone
else to go through and document the other modes.
A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.
Add a timing safe bcmp for use to compare MACs. Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.
Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place. The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.
We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.
Obtained from: p4: //depot/projects/opencrypto
Relnotes: yes
Sponsored by: FreeBSD Foundation
Sponsored by: NetGate
support, make this explicit in src.opts.mk, by updating the default
settings.
The defaults become as follows:
* If the host compiler is not C++11 capable, use gcc and disable clang.
* On x86, enable clang, make it the default cc, and disable gcc.
* On little-endian ARM, enable clang, but not the full build, make it
the default cc, and disable gcc.
* On PowerPC, enable clang, but enable gcc and make that the default cc.
* On everything else, use gcc, and disable clang.
This can be amended later, if we get e.g. sparc64 or big-endian ARM
working with clang.
Reviewed by: imp, brooks
Differential Revision: https://reviews.freebsd.org/D1294
termcap entry reordering requires ex (which is available via usr.bin/vi), which
breaks on build hosts where installworld is run with MK_VI == no (or when
make delete-old is run on ^/projects/building-blocks as vi, et al, are
removed on the branch when the knob is tweaked to => "no")
Reordering termcap was believed to improve performance, but the file is now
accessed via /etc/termcap.db, so /etc/termcap (and /usr/share/misc/termcap by
proxy) access is less preferred.
Reordering the file broke the historical comment <-> entry mapping as well,
which could muddle the purpose of entries in the file, so it could be
potentially harmful to readers in its reordered state.
Discussion took place on hackers@ here:
https://lists.freebsd.org/pipermail/freebsd-hackers/2014-December/046657.html
Discussed with: -hackers, mp
MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division
Set WITH_ELFTOOLCHAIN_TOOLS in src.conf to use the elftoolchain version
of the following tools:
* addr2line
* elfcopy (strip / mcs)
* nm
* size
* strings
Reviewed by: bapt (earlier version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1224
to how they differ. This will assist users in selecting which interface
is more appropriate for their purposes.
Approved by: grog (co-mentor)
MFC after: 2 week
- MK_FILE will conditionalize building lib/libmagic and usr.bin/file
- MK_SQLITE3 will conditionalize building lib/libsqlite3, and will disable
MK_SVN/MK_SVNLITE by proxy
Customize according to MK_GAMES and MK_VI, in particular comment out lines
that would change behavior
Change dot.cshrc and dot.profile to not check for /usr/games/fortune based
on the new behavior in customizing the files
implementation, merge ^/head r275078 through r275117.
Note that all the extraneous mergeinfo is there because Subversion
created it. I'll hopefully be able to remove it again when merging back
to head.
- bootparamd
- bootpd
- finger/fingerd
- ftp/ftpd
- hastctl/hastd
- iscsid, et al
- rbootd
- talk/talkd
- tcpd, et al
- tftp/tftpd
Add src.conf entries for the various components and do a best effort
at adding components to tools/build/mk/OptionalObsoleteFiles.inc
This is a thin wrapper around the kernel interface which should make
it easier to write GPIO applications. gpioctl(8) will be converted to
use this library in a separate commit.
Differential Revision: https://reviews.freebsd.org/D1183
Reviewed by: adrian, loos
Discussed on: arm@, embedded@
Relnotes: yes
LIBADD will automatically set DPADD and LDADD when needed including their
dependencies, LIBADD automatically handles private and internal libs so that
the end user Makefile does not have to care about it.
This allows to reduce overlinking on the base system leaving the framework get
the dependencies properly.
It also allows to built components binaries statically.
To use it:
Replace:
DPADD= ${LIBARCHIVE} ${LIBSSL}
LDADD= -larchive -lssl
by:
LIBADD= archive ssl
Differential Revision: https://reviews.freebsd.org/D1209
Reviewed by: brooks imp
supported hardware list. Judging by the PCI driver attachment, dpt_pci.c
only supports a single adapter rather than the various PCI adapters listed.
The list of EISA adapters listed somewhat overlaps with the device IDs in
dpt_eisa.c. It's not clear which devices are ISA-only devices.
Initially in_matrote() in_clsroute() in their current state was introduced by
r4105 20 years ago. Instead of deleting inactive routes immediately, we kept them
in route table, setting RTPRF_OURS flag and some expire time. After that, either
GC came or RTPRF_OURS got removed on first-packet. It was a good solution
in that days (and probably another decade after that) to keep TCP metrics.
However, after moving metrics to TCP hostcache in r122922, most of in_rmx
functionality became unused. It might had been used for flushing icmp-originated
routes before rte mutexes/refcounting, but I'm not sure about that.
So it looks like this is nearly impossible to make GC do its work nowadays:
in_rtkill() ignores non-RTPRF_OURS routes.
route can only become RTPRF_OURS after dropping last reference via rtfree()
which calls in_clsroute(), which, it turn, ignores UP and non-RTF_DYNAMIC routes.
Dynamic routes can still be installed via received redirect, but they
have default lifetime (no specific rt_expire) and no one has another trie walker
to call RTFREE() on them.
So, the changelist:
* remove custom rnh_match / rnh_close matching function.
* remove all GC functions
* partially revert r256695 (proto3 is no more used inside kernel,
it is not possible to use rt_expire from user point of view, proto3 support
is not complete)
* Finish r241884 (similar to this commit) and remove remaining IPv6 parts
MFC after: 1 month
The canonical standalone debug directory established by the GNU
toolchain is /usr/lib/debug, and we use it when WITH_DEBUG_FILES is set.
Mention it in the file system hierarchy page.
Reviewed by: bcr
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1134
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.
No objections from: net@
Split it into two modules: if_gre(4) for GRE encapsulation and
if_me(4) for minimal encapsulation within IP.
gre(4) changes:
* convert to if_transmit;
* rework locking: protect access to softc with rmlock,
protect from concurrent ioctls with sx lock;
* correct interface accounting for outgoing datagramms (count only payload size);
* implement generic support for using IPv6 as delivery header;
* make implementation conform to the RFC 2784 and partially to RFC 2890;
* add support for GRE checksums - calculate for outgoing datagramms and check
for inconming datagramms;
* add support for sending sequence number in GRE header;
* remove support of cached routes. This fixes problem, when gre(4) doesn't
work at system startup. But this also removes support for having tunnels with
the same addresses for inner and outer header.
* deprecate support for various GREXXX ioctls, that doesn't used in FreeBSD.
Use our standard ioctls for tunnels.
me(4):
* implementation conform to RFC 2004;
* use if_transmit;
* use the same locking model as gre(4);
PR: 164475
Differential Revision: D1023
No objections from: net@
Relnotes: yes
Sponsored by: Yandex LLC
Otherwise there's nothing for ctfconvert to do, and it ends up emitting an
error for each object file. Also remove some redundant checks from
bsd.prog.mk and bsd.lib.mk.
Differential Revision: https://reviews.freebsd.org/D1111
Reviewed by: imp
a kludge. However, it also effectively works around the issues for
high -j builds on systems that do not have the rm fixes.
A better fix would be to rmdir here, and fix the places where we're
sloppy and not list all the files we create in CLEANFILES, should
anybody have the time to chase them all to ground.
generating files from various sources instead of calling cat ${.ALLSRC} | sed
The perl case was skipped because it's not being used in the tree at this time
contrib/netbsd-tests
This Makefile snippet handles polluting testcases with -lnetbsd, specific
headers for ATF version differences, and does necessary rewriting for the
testcases to match the format discussed on the TestSuite wiki page
(t_<foo> -> <foo>_test)
One must define SRCTOP (inspired by projects/bmake), OBJTOP, and TESTSRC
(e.g. contrib/netbsd-tests/lib/libc/gen) to use the Makefile snippet
Test programs are specific either via NETBSD_ATF_TESTS_C or NETBSD_ATF_TESTS_SH
C++ analogs aren't currently implemented.
The imported testcases will be cleaned up to use this Makefile snippet pseudo
"API".
Those tunables are used to set a specific mode in vt(4) instead of using
the default mode.
Differential Revision: https://reviews.freebsd.org/D1098
Reviewed by: ak@, emaste@, kwm@
MFC after: 1 week
pjdfstest execution is opt-in and must be done as root due to some of the
assumptions made by the test suite and lack of error checking in the non-root
case
A description of how to execute pjdfstest with kyua is provided in
share/pjdfstest/README
Phabric: D824 (an earlier prototype patch)
MFC after: 1 month
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
whether the shared request for already shared-locked lock could be
granted. Both problems result in the exclusive locker starvation.
The concurrent exclusive request is indicated by either
LK_EXCLUSIVE_WAITERS or LK_EXCLUSIVE_SPINNERS flags. The reverse
condition, i.e. no exclusive waiters, must check that both flags are
cleared.
Add a flag LK_NODDLKTREAT for shared lock request to indicate that
current thread guarantees that it does not own the lock in shared
mode. This turns back the exclusive lock starvation avoidance code;
see man page update for detailed description.
Use LK_NODDLKTREAT when doing lookup(9).
Reported and tested by: pho
No objections from: attilio
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
of fuword(9) and suword(9). This makes the functions type-compatible
with volatile objects and does not require devolatile force, e.g. in
kern_umtx.c.
Requested by: bde
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
bsd.progs.mk generates a separate depend file for every program being
built, but then it does not properly tell each submake to use those
individual files. Properly propagate the depend file to use.
Discovered while preparing the update of atf to 0.21 and noticing that
the test programs were not being relinked to the new library.
This change is "make tinderbox" clean.
This code has had an extensive rewrite and a good series of reviews, both by the author and other parties. This means a lot of code has been simplified. Pluggable structures for high-rate entropy generators are available, and it is most definitely not the case that /dev/random can be driven by only a hardware souce any more. This has been designed out of the device. Hardware sources are stirred into the CSPRNG (Yarrow, Fortuna) like any other entropy source. Pluggable modules may be written by third parties for additional sources.
The harvesting structures and consequently the locking have been simplified. Entropy harvesting is done in a more general way (the documentation for this will follow). There is some GREAT entropy to be had in the UMA allocator, but it is disabled for now as messing with that is likely to annoy many people.
The venerable (but effective) Yarrow algorithm, which is no longer supported by its authors now has an alternative, Fortuna. For now, Yarrow is retained as the default algorithm, but this may be changed using a kernel option. It is intended to make Fortuna the default algorithm for 11.0. Interested parties are encouraged to read ISBN 978-0-470-47424-2 "Cryptography Engineering" By Ferguson, Schneier and Kohno for Fortuna's gory details. Heck, read it anyway.
Many thanks to Arthur Mesh who did early grunt work, and who got caught in the crossfire rather more than he deserved to.
My thanks also to folks who helped me thresh this out on whiteboards and in the odd "Hallway track", or otherwise.
My Nomex pants are on. Let the feedback commence!
Reviewed by: trasz,des(partial),imp(partial?),rwatson(partial?)
Approved by: so(des)
expression (:M) is empty, not the not matched (:N) is empty. The former case
means we have not found the TEST_SUBDIR value in SUBDIR
Reported by: rodrigc
X-MFC with: r273803
Pointyhat to: me (did not use a clean install root)
Sponsored by: EMC / Isilon Storage Division
appending the TESTS_SUBDIRS variable to SUBDIR
Duplicate directory entries can cause unexpected side effects, like
installing the same files multiple times. This can be easily
reproduced via the following testcase prior to this commit:
SUBDIR= dir
TESTS_SUBDIRS+= dir
.include <bsd.test.mk>
Sponsored by: EMC / Isilon Storage Division
and casuword(9), but do not mix value read and indication of fault.
I know (or remember) enough assembly to handle x86 and powerpc. For
arm, mips and sparc64, implement fueword() and casueword() as wrappers
around fuword() and casuword(), which means that the functions cannot
distinguish between -1 and fault.
On architectures where fueword() and casueword() are native, implement
fuword() and casuword() using fueword() and casuword(), to reduce
assembly code duplication.
Sponsored by: The FreeBSD Foundation
Tested by: pho
MFC after: 2 weeks (ia64 needs treating)
While I'm there also correct typos in OptionalObsoleteFiles and add
information of the command line options for hv_kvp_daemon(8).
Reported by: jmg [1]
Reviewed by: jmg
MFC after: 2 weeks
create a new code block and thus must be balanced at the same lexical
scope. (This is also a requirement in POSIX.)
PR: 194280
Submitted by: dr2867.business@pacbell.net
MFC after: 1 week
Support for the multiport feature is mostly implemented, but currently
disabled due to some potential races in the hot plug code paths.
Requested by: marcel
MFC after: 1 month
Relnotes: yes
Check for -static in LDFLAGS or LDFLAGS.<test>, then pass in the appropriate
dependency (LIBATF or LDATF)
This unbreaks the build with some of the NetBSD tests that need to be compiled
statically
Reviewed by: imp, jmmv
Phabric: D991
Sponsored by: EMC / Isilon Storage Division
issue. lib/atf isn't a prereq_lib, since it isn't required for other
libraries to build. Remove it. The old kludge of always building it
had effectively been retired. Since we don't want to build the
libraries with the tests when we're bootstrapping, invent
MK_TESTS_SUPPORT which normally defaults to the current MK_TESTS
value, except when explicitly defined. Make lib/atf depend on it being
yes. When building the libraries set MK_TESTS to no, and
MK_TESTS_SUPPORT to the current value of MK_TESTS so that later stages
of the build work correctly. This should fix (and does for me)
people's issues with parallel builds racing between lib/atf and
libexec/atf. Since lib/atf is built during the libraries phase, the
race disappears.
userland defaults to no. This caused issues for the automated option
documenation script. Turns out, this isn't used in userland at all, so
just remove it from here.
time and gnu.warnings.symbol are now being fatal preventing building world.
in the futur we want to investigate only making the gnu.warning.symbol non fatal
Reviewed by: imp
when building with an external gcc, we want to be able to pass the path to
the libc++ headers so dependencies are correctly computed for C++ source files.
Add a DEPFLAGS for that purpose
Reviewed by: imp
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
* anchor search strings appropriately,
* use .ALLSRC to pass the full path to the D script to dtrace(1),
* don't insert the auto-generated header into SRCS - it doesn't
accomplish anything, and we end up having to remove it from OBJS anyway.
Reviewed by: rpaulo
Differential Revision: https://reviews.freebsd.org/D978
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
vxlan creates a virtual LAN by encapsulating the inner Ethernet frame in
a UDP packet. This implementation is based on RFC7348.
Currently, the IPv6 support is not fully compliant with the specification:
we should be able to receive UPDv6 packets with a zero checksum, but we
need to support RFC6935 first. Patches for this should come soon.
Encapsulation protocols such as vxlan emphasize the need for the FreeBSD
network stack to support batching, GRO, and GSO. Each frame has to make
two trips through the network stack, and each frame will be at most MTU
sized. Performance suffers accordingly.
Some latest generation NICs have begun to support vxlan HW offloads that
we should also take advantage of. VIMAGE support should also be added soon.
Differential Revision: https://reviews.freebsd.org/D384
Reviewed by: gnn
Relnotes: yes
vt(4) is the default console for UEFI boot [1], and the bitmapped
kern.vt.spclkeys sysctl has been replaced with individual kern.vt.kbd_*
enable sysctls.
PR: 193710
Submitted by: wblock [1]
Reviewed by: wblock
MFC after: 3 days
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D953
r273170:
MK_ARB_EABI was removed in r272350 so remove the documentation.
r273171:
Per r273155, HYPERV is built by default on platforms where it makes
sense and ignored on others.
r273172:
Document that WITHOUT_TOOLCHAIN causes headers to not be installed, not
just programs.
for i386/amd64. Rather, it only works on i386/amd64 and should only be
built there. Rather than change the default based on which
architecutre, do things more directly by only building it on
i386/amd64 and having it always on. This is how we handle other
options that are relevant only for a few architectures.
The '-f' check works fine on a regular file but not if the backing file is
a device (e.g., /dev/md0). In this case it would print a misleading but
otherwise benign message about the backing file not being present.
Submitted by: Marcus Reid (marcus@blazingdot.com)
Discussed with: grehan
o convert to if_transmit;
o use rmlock to protect access to gif_softc;
o use sx lock to protect from concurrent ioctls;
o remove a lot of unneeded and duplicated code;
o remove cached route support (it won't work with concurrent io);
o style fixes.
Reviewed by: melifaro
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
This allows us to use libevent for other application in the future.
For now libevent is still INTERNALLIB and no shared library is installed.
MFC after: 1 month
of timeout(9) to the end and mark it prominently as deprecated. Document
somewhat how times are specified for the 'sbt' variants. Better explain
how using callout_init_*() to associate a lock with a callout resolves
common races.
Differential Revision: https://reviews.freebsd.org/D847
Reviewed by: wblock, bjk
MFC after: 1 week
r272234, r272236, r272262, r272264, r272269, r272271, r272272,
r272277, r272279, r272376, r272380, r272381, r272392, r272234,
r272412:
r272234:
Initial commit to include virtual machine images as part
of the FreeBSD release builds.
This adds a make(1) environment variable requirement,
WITH_VMIMAGES, which triggers the virtual machine image
targets when not defined to an empty value.
Relevant user-driven variables include:
o VMFORMATS: The virtual machine image formats to create.
Valid formats are provided by running 'mkimg --formats'
o VMSIZE: The size of the resulting virtual machine
image. Typical compression is roughly 140Mb, regardless
of the target size (10GB, 15GB, 20GB, 40GB sizes have been
tested with the same result).
o VMBASE: The prefix of the virtual machine disk images.
The VMBASE make(1) environment variable is suffixed with
each format in VMFORMATS for each individual disk image, as
well as '.img' for the source UFS filesystem passed to
mkimg(1).
This also includes a new script, mk-vmimage.sh, based on how
the VM images for 10.0-RELEASE, 9.3-RELEASE, and 10.1-RELEASE
were created (mk-vmimage.sh in ^/user/gjb/thermite/).
With the order in which the stages need to occur, as well as
sanity-checking error cases, it makes much more sense to
execute a shell script called from make(1), using env(1) to
set specific parameters for the target image than it does to
do this in make(1) directly.
r272236:
Use VMBASE in place of a hard-coded filename in the CLEANFILES
list.
r272262:
Remove a 'set -x' that snuck in during testing.
r272264:
release/Makefile:
Connect the virtual machine image build to the release
target if WITH_VMIMAGES is set to a non-empty value.
release/release.sh:
Add WITH_VMIMAGES to RELEASE_RMAKEFLAGS.
release/release.conf.sample:
Add commented entries for tuning the release build if the
WITH_VMIMAGES make(1) environment variable is set to
a non-empty value.
r272269:
release/Makefile:
Include .OBJDIR in DESTDIR in the vm-base target.
release/release.sh:
Provide the full path to mddev.
r272271:
Fix UFS label for the root filesystem.
r272272:
Remove comments left in accidentally while testing, so the
VM /etc/fstab is actually created.
r272277:
Remove the UFS label from the root filesystem since it is added
by mkimg(1) as a gpt label, consistent with the fstab(5) entry.
r272279:
Comment cleanup in panic() message when mkimg(1) does not support
the requested disk image format.
r272376:
Separate release/scripts/mk-vmimage.sh to machine-specific
scripts, making it possible to mimic the functionality for
non-x86 targets.
Move echo output if MAKEFLAGS is empty outside of usage().
Remove TARGET/TARGET_ARCH evaluation.
r272380:
Avoid using env(1) to set values passed to mk-vmimage.sh,
and instead pass the values as arguments to the script,
making it easier to run this by hand, without 'make release'.
Add usage_vm_base() and usage_vm_image() usage helpers.
r272381:
After evaluating WITH_VMIMAGES is non-empty, ensure
the mk-vmimage.sh script exists before running it.
r272392:
Add WITH_COMPRESSED_VMIMAGES variable, which when set enables
xz(1) compression of the virtual machine images.
This is intentionally separate to allow more fine-grained
tuning over which images are compressed, especially in cases
where compressing 20GB sparse images can take hours.
r272412:
Document the new 'vm-image' target, and associated release.conf
variables.
r272413:
Remove two stray comments added during the initial iterations
of testing, no longer needed.
MFC after: 5 days
X-MFC-10.1: yes
Tested on: r272269, r272272, r272279, r272380, r272392
Sponsored by: The FreeBSD Foundation
if_lagg(4) interfaces which were cloned in a vnet jail.
Sysctl nodes which are dynamically generated for each cloned interface
(net.link.lagg.N.*) have been removed, and use_flowid and flowid_shift
ifconfig(8) parameters have been added instead. Flags and per-interface
statistics counters are displayed in "ifconfig -v".
CR: D842
This has the side effect of ensuring that realpath is also run for the
nominal case of PORTSDIR=/usr/ports (assuming .CURDIR is a ports directory
that relies on /usr/ports but is not rooted in it). This ensures that any
generated PORTSDIR used is always the actual location.
Submitted by: jkim (different implementation)
Use standard mdoc macros instead of pure roff, fix some other mdoc usage,
make the style consistent, and fix some grammar issues.
Approved by: hrs (mentor)
the oabi is still in the tree, but it is expected this will be removed
as developers work on surrounding code.
With this commit the ARM EABI is the only supported supported ABI by
FreeBSD on ARMa 32-bit processors.
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D876
that this means full checksum coverage for received packets.
If an application is willing to accept packets with partial
coverage, it is expected to use the socekt option and provice
the minimum coverage it accepts.
Reviewed by: kevlo
MFC after: 3 days
tethering functionality only. Add a "bugs" section to give a pointer
to usbconfig set_config if the device isn't automatically detected.
MFC after: 3 days
This will only take effect if PORTSDIR is not set, as previously supported.
Use .if exists(), for four specific possibilities relative to .CURDIR:
., .., ../.., and ../../.. The fourth possibility is primarily in case
ports ever grows a third level. If none of these paths exist, fall back to
the old default of /usr/ports.
This removes the need to set PORTSDIR explicitly (or via wrapper script) if
one is running out of a ports tree that is not in /usr/ports, but in a
home directory.
Reviewed by: bapt, bdrewery (older version)
CR: D799
MFC after: 1 week
Sponsored by: Spectra Logic
1. Do not install FILES/SCRIPTS multiple times if PROGS is specified; this is
already handled via bsd.prog.mk when it's called recursively (PR: 191055,
191955).
2. Some variables, like BINDIR and PROGNAME, default to a value if unset
whereas others get appended to, like CFLAGS. Add support for the former case
(PR: 191056)
3. Make "checkdpadd" and "clean" available targets for recursive execution.
Reviewed by: marcel, sjg
Phabric: D822
PR: 191055, 191056, 191955
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
- Priority argument is introduced to sleepq_*wait* in r177085
- sleepq_calc_signal_retval is removed from implementation
- sleepq_catch_signals is internal now
Differential Revision: https://reviews.freebsd.org/D794
Reviewed by: jhb
Approved by: jhb
struct ifnet if_oqdrops.
Some netgraph modules used ifqueue w/o ifnet. Accounting of queue drops
is simply removed from them. There were no API to read this statistic.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
The FreeBSD is the only system that has the FEC protocol, that is a simple alias
to loadbalance protocol and does not implement the ancient Cisco FEC standard.
From now on, we remove the fec protocol from the documentation and keep the FEC
code only for compatibility.
Phabric: D539
Reviewed by: glebius, thompsa
Approved by: glebius
Sponsored by: QNAP Systems Inc.
and receives frames on any port of the lagg(4).
Phabric: D549
Reviewed by: glebius, thompsa
Approved by: glebius
Obtained from: OpenBSD
Sponsored by: QNAP Systems Inc.
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
This is a stable/10 candidate for inclusion with 10.1-RELEASE.
Submitted by: Wei Hu <weh microsoft com>
MFC after: 1 week
ISO will appear to be mounted on a /dev/cd device
instead of /dev/vtbd. This is similar to how other
virtualization environments handle mounting ISO images.
Reviewed by: neel
ifa_ifwithdstaddr. For the sake of backwards compatibility, the new
arguments were added to new functions named ifa_ifwithnet_fib and
ifa_ifwithdstaddr_fib, while the old functions became wrappers around the
new ones that passed RT_ALL_FIBS for the fib argument. However, the
backwards compatibility is not desired for FreeBSD 11, because there are
numerous other incompatible changes to the ifnet(9) API. We therefore
decided to remove it from head but leave it in place for stable/9 and
stable/10. In addition, this commit adds the fib argument to
ifa_ifwithbroadaddr for consistency's sake.
sys/sys/param.h
Increment __FreeBSD_version
sys/net/if.c
sys/net/if_var.h
sys/net/route.c
Add fibnum argument to ifa_ifwithbroadaddr, and remove the _fib
versions of ifa_ifwithdstaddr, ifa_ifwithnet, and ifa_ifwithroute.
sys/net/route.c
sys/net/rtsock.c
sys/netinet/in_pcb.c
sys/netinet/ip_options.c
sys/netinet/ip_output.c
sys/netinet6/nd6.c
Fixup calls of modified functions.
share/man/man9/ifnet.9
Document changed API.
CR: https://reviews.freebsd.org/D458
MFC after: Never
Sponsored by: Spectra Logic
addresses generated by an address range specification. The default
value is 2048. This can be increased by setting $netif_ipexpand_max
in rc.conf.
- Fix warning messages when an address range spec exceeds the upper limit.
PR: 186841
- Reduce DPADD and LDADD in checkdpadd to -l<foo>
- Skip over -Wl,[es]*-group because -Wl,--end-group and
-Wl,--start-group might be required to properly link objects (see
usr.bin/clang/lldb as an example)
This caveat has been present for a while with some components of
the build. However, these false positives were made more more apparent
after r269648.
Phabric: D635
Reviewed by: jmmv (an earlier version)
PR: 192730
MFC after: 2 weeks
tree support includes a device tree source compiler dtc(8) which
converts .dts files into .dtb files. /boot/loader will load dtb files
from this directory by default, allowing for fewer differences between
images for different SoCs. Compiled dts files will wind up here
eventually as an alternative to embedding them into the kernel.
Document this in hier(7), as well as add missing entries for
/boot/firmware and /boot/zfs, though the latter two should only be
considered place holders if someone wants to make them better.
Use of "find ." resulted in METALOG entries with an extra ./ -- e.g.,
./usr/share/zoneinfo/./America/Toronto. Avoid this by using globbing
via "find *" instead.
Reviewed by: brooks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D719
This allows WITH_DEBUG_FILES to produce standalone debug for the ELF
runtime linker.
We previously disabled standalone debug files for bsd.prog.mk consumers
that included a non-default ${PROG} target, but this is not required.
Consumers that do not support standalone debug are still handled by
disabling it for statically linked binaries, and for those that specify
a non-default binary format.
Sponsored by: DARPA, AFRL
While there, add a NO_WTHREAD_SAFETY flag that can be used to disable
this specific warning flag. Disable it for auditdistd. We can easily
patch up auditdistd to have the right annotations to build, but as
auditdistd is intended to be portable across other operating systems,
it's not worth the effort.
Approved by: brueffer@
packets at all. Swapping byte order on SOCK_RAW was actually a bug, an
artifact from the BSD network stack, that used to convert a packet to
native byte order once it is received by kernel.
Other operating systems didn't follow this, and later other BSD
descendants fixed this, leaving us alone with the bug. Now it is
clear that we should fix the bug.
In collaboration with: Olivier Cochard-Labbé <olivier cochard.me>
See also: https://wiki.freebsd.org/SOCK_RAW
Sponsored by: Nginx, Inc.
appropriate (i.e. where syscons was already mentioned and vt supports the
feature). Comments in defaults/rc.conf are updated to match the contents
of the modified man-page rc.conf(5).
Reviewed by: pluknet, emaste
MFC after: 3 days
Add LIBSSP_NONSHARED to bsd.libnames.mk and append LIBSSP_NONSHARED to DPADD in
lib/libc when MK_SSP != no
Approved by: rpaulo (mentor)
MFC after: 3 days
Phabric: D675 (as part of a larger diff)
PR: 192728
then it is no longer necessary to "bhyvectl --destroy" the VM when it reboots.
Move the "bhyvectl --destroy" outside of the while loop.
Reviewed by: neel
several updates to the converter tools. There is now support for hybrid
source keymaps, which e.g. use ISO8859-1 (not -15) but still provide an
Euro key (on the "E" key). ISO8859-1 currency symbols on other keys are
still converted to that character, not the Euro sign. A similar hack was
applied to the Japanese keyboards to add the Yen key, that could not be
expressed in SYSCONS.
Several modifications have been applied after the conversion (removal of
unused accents tables, some reformatting, exchange of a few key symbols).
The German keymap (de.kbd) is now using deadkeys only for those keys,
that behave that way under Windows. There are now ".acc" and ".noacc"
variants, which use deadkeys vs. nodeadkeys for all accent keys.
I'm still in the process of comparing keymaps that existed in different
encodings in SYSCONS. These are generally translated slightly differently,
either because of mistakes, or because of different preferences, or due
to limitations of the respective encoding.
MFC after: 3 days
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
but shall provide an Euro sign - similar for Japanese Yen).
The Brazilian keymap "br.kbd" now has accents, by default - the no-accents
version has been renamed to "br.noacc.kbd".
MFC after: 3 days
I have spent many hours comparing source and destination formats, and hope
to have caught the most severe conversion errors.
Files were converted with a Perl script which I'll shortly commit to the
tools directory. This script is a much enhanced version of the one
provided by ray@ and is expected to support the full kbdmap(5) syntax.
The naming convention used is:
<2-letter country code>.<variant>.kbd
Only if there are multiple layouts for different languages:
<2-letter country code>-<2-letter language code>.<variant>.kbd
In nearly all cases, the keyboards are country specific, only. Currently
there is only one case where the language was added ("ch-fr.kbd" for
the Swiss-French keyboard layout).
I choose to write Unicode character codes as hex numbers. While this
increases the diff to the SYSCONS keymap files for the trivial cases
(conversion from ISO8859-1), it really helps to verify the more complex
cases against a Unicode table (which is indexed by hex numbers).
This commit does not cover all files that have been converted, since I
need to sort out which ones to use, if there were several with different
source encodings to choose from.
Review and test of the keymap files is highly desirable before 10.1 is
released. I'd also appreciate educated opinions regarding the optimum
variant (to be made available as the default for each language).
Since there are no NEWCONS keymaps in 10-STABLE, I plan to MFC after
the minimum allowed delay of 3 days, to allow at least a few weeks to
test and improve what will be in the next release.
MFC after: 3 days
The use of the old ISO language code "iw" for Hebrew was inconsistent
and it is replaced by the new language code "he" (which was already
used for the keyboard menu entry, but not for the menu heading or the
default font).
These changes are in preparation of the conversion of this file and
the keymap definitions to Unicode for use with NEWCONS.
UNIX systems, eg. MacOS X and Solaris. It uses Sun-compatible map format,
has proper kernel support, and LDAP integration.
There are still a few outstanding problems; they will be fixed shortly.
Reviewed by: allanjude@, emaste@, kib@, wblock@ (earlier versions)
Phabric: D523
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
These were copied from share/syscons/keymaps/??.iso.kbd. They were
not actually ISO 8859-1 as assumed. When interpreted as Unicode they
ended up with the generic currency sign (U+00A4) instead of the euro
(U+20AC).
Reported by: Claude Buisson, tijl@
the build starts.
This adds a new variable DHDRS that contains a list of all DTrace
header files. Then, we use the beforedepend hook to make sure the
heaeder files are built.
Introduce a beforebuild dependency (from projects/bmake) based on
feedback from Simon J. Gerraty. This lets us generate the header
files without running make depend.
Reviewed by: sjg, imp
MFC after: 3 days
This doesn't work like I expected and the if clause is never matched.
It turns out that the problem with the older make is unrelated.
MFC after: 3 days
* Include OBJDIR to make sure the generated file is found;
* Simplify the definition of OBJS;
* Add targets for shared objects and for profiled objects.
MFC after: 3 days
Make sure everything linking to a privatelib and/or an internallib does it directly
from the OBJDIR rather than DESTDIR.
Add src.libnames.mk so bsd.libnames.mk is not polluted by libraries not existsing
in final installation
Introduce the LD* variable which is what ld(1) is expecting (via LDADD) to link to
internal/privatelib
Directly link to the .so in case of private library to avoid having to complexify
LDFLAGS.
Phabric: https://phabric.freebsd.org/D553
Reviewed by: imp, emaste
We continue to use pmap_enter() for that. For unwiring virtual pages, we
now use pmap_unwire(), which unwires a range of virtual addresses instead
of a single virtual page.
Sponsored by: EMC / Isilon Storage Division
Update the copyright to be more in line with the current version in
our tree.
Remove the ancient rcsid.
Add a proper return from the main function
Pointed out by: bz
SYSCTL code. Added description of new macros and functions.
- Merged dynamic and static SYSCTL related content into a single
manual page, hence parameters and functionality is very much the same.
- Uppercased all occurrences of "OID".
- Updated all SYSCTL examples.
PR: 192101
This particular program attempts to use the TSC to measure how long
certainly libpmc operations take. Depending on the quality of
the rdtsc() macro on a particular architecture this may work
more or less well.
get them flagged as .NOPATH. This hurts people who don't use obj dirs.
Since its clean target seprate rm's for things, use NOPATH_FILES as list
to collect things that need .NOPATH.
bsd.obj.mk will add CLEANFILES to NOPATH_FILES and do the deed if needed.
Reviewed by: sbruno
code. The consensus on arch@ is that this feature might have been useful
in the distant past, but is now just unnecessary bloat.
The int_rman_activate_resource() and int_rman_deactivate_resource()
functions become trivial, so manually inline them.
The special deferred handling of RF_ACTIVE is no longer needed in
reserve_resource_bound(), so eliminate the associated code at the
end of the function.
These changes reduce the object file size by more than 500 bytes on i386.
Update the rman.9 man page to reflect the removal of the RF_TIMESHARE
feature.
MFC after: 2 weeks
This is a redo of r267424, which was reverted in r267432 because it broke
"make buildworld" from FreeBSD 9.x. This issue has been resolved and this
change is still "make tinderbox" clean.
While here also reword 'show buffer' to have an 'addr' argument and to
match other struct documentation.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
nothing more. Force it to be "no" when MK_CXX is "no" to simplify
usage. It no longer also means "build g++" since we no longer have a
platform where that's interesting now that pc98 no longer needs clang
and gcc, but not g++. pc98 now just uses clang after boot2 changes.
statically linked into consumers (GDB and variants) in the base
system, and the shared library is no longer installed.
That also allows ports to be able to use a modern version of readline
PR: 162948
Reviewed by: emaste
With the move of atf-sh into /usr/libexec in r267181, some of the
tests in the integration_test program broke because they could not
execute atf-sh from the path any longer.
This slipped through because I do have a local atf installation in
my home directory that appears in my path, hence the tests could
still execute my own version.
Fix this by forcing /usr/libexec to appear at the beginning of the
path when attempting to execute atf-sh.
To make upgrading easy (and to avoid an unnecessary entry in UPDATING),
make integration_test depend on the Makefile so that a rebuild of the
shell script is triggered. This requires a hack in the *.test.mk files
to ensure the Makefile is not treated as a source to the generated
program. Ugly, I know, but I don't have a better way of doing this at
the moment. Will think of one once I address the TODO in the *.test.mk
files that suggests generalizing the file generation functionality.
PR: 191052
Reviewed by: Garrett Cooper
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
When building world when WITH_DEBUG_FILES is set,
avoid building ar(1) archives with '-g'.
Tested on: head@r267801
Reviewed by: emaste, imp
Sponsored by: The FreeBSD Foundation
The _SUPPORT knobs have a consistent meaning which differs from the
behaviour controlled by this knob. As the knob is opt-out and has not
appeared in a release the impact should be low.
Suggested by: imp, wblock
MFC after: 1 week
implement options TERMINAL_{KERN,NORM}_ATTR. These are aliased to
SC_{KERNEL_CONS,NORM}_ATTR and like these latter, allow to change the
default colors of normal and kernel text respectively.
Note on the naming: Although affecting the output of vt(4), technically
kern/subr_terminal.c is primarily concerned with changing default colors
so it would be inconsistent to term these options VT_{KERN,NORM}_ATTR.
Actually, if the architecture and abstraction of terminal+teken+vt would
be perfect, dev/vt/* wouldn't be touched by this commit at all.
Reviewed by: emaste
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
- vt_vga(4) is a driver rather than a function so reference it accordingly.
- Uncomment HISTORY section given that vt(4) will first appear in 9.3.
Reviewed by: emaste (modulo last part)
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
With this change and previous work from ray@ it will be possible to put
both in GENERIC, and have one enabled by default, but allow the other to
be selected via the loader.
(The previous implementation had separate kern.vt.disable and
hw.syscons.disable tunables, and would panic if both drivers were
compiled in and neither was explicitly disabled.)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
is identified as "DOS/MBR boot sector" as opposed to "x86 boot sector".
This trips up vmrun.sh when using the new file(1) and makes it want to boot
into the installer instead.
Fix this by just looking for "boot sector" instead.
Many thanks to jmg for reviewing the (previous version) of the text
and providing grammar and content fixes.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
separate argument structure with added level_type field for
CPUID_CPUID_COUNT request.
Reviewed by: attilio (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
performing cpuid calls.
Add also a new way to specify the level type to cpucontrol(8) as
reported in the manpage.
Sponsored by: EMC / Isilon storage division
Reviewed by: bdrewery, gcooper
Testerd by: bdrewery
This consists of the unique glyphs from the following font files in
/usr/share/syscons/fonts:
iso*.fnt ISO-8859-1 West European
iso02*.fnt ISO-8859-2 Central European
iso04*.fnt ISO-8859-4 Baltic
iso05*.fnt ISO-8859-5 Cyrillic
iso07*.fnt ISO-8859-7 Greek
iso08*.fnt ISO-8859-8 Hebrew
iso09*.fnt ISO-8859-9 Turkish
iso15*.fnt ISO-8859-15 West European
Sponsored by: The FreeBSD Foundation
This allows you to give a bhyve instance multiple network devices
and disk devices easily by specifying additional "-d " and "-t "
options.
Reviewed by: neel
Sponsored by: Norse
during SUBDIR_PARALLEL builds. This augments the coarse .WAIT mechanism,
which is still useful if you've got a situation such as "almost everything
depends on A and B".
Because the parallel subdir mechanism uses non-obvious mangling of
target names, which should probably remain a private detail of the
implementation, it's not easy to do things like "libfoo: libbar", so
instead the new mechanism lets you set a variable that lists dependencies:
SUBDIR_DEPEND_libfoo= libgroodah libpouet
Note that while I'm using libraries as an example here, it really has
nothing to do with the generated library files. This is really saying
"build in directory libfoo after building in the libgroodah and libpouet
directories."
This updates lib/Makefile with dependency information based on the old
almost-accurate comment block and by combing through lib/* makefiles
looking for LDADD dependencies to other libraries within lib/*.
Reviewed by: Jia-Shiun Li <jiashiun@gmail.com>
This was never intended to be off by default but was done this way
because the initial patches broke the build. Things seem stable now
(have been so for a while too) and "make tinderbox" is clean so let's
try again.
Announced in freebsd-current; all reported shortcomings have been
addressed.
vtfontcvt(8) is now built during buildworld, so can be used as a
bootstrap tool to create vt(4) fonts from source .hex or .bdf font
files, rather than having uuencoded binary fonts in the tree.
Sponsored by: The FreeBSD Foundation
Force all the contents of /usr/tests to go into a separate distribution
file so that users of binary releases can easily choose to not install it.
To make this possible, we need two fixes:
- bsd.subdir.mk needs to properly honor NO_SUBDIR in all cases so that we
do not recurse into 'tests' subdirectories when we needn't. Otherwise,
we end up with some Kyuafiles in base.txz.
- etc/Makefile needs to skip installing tests in its 'distribute' target
so that a Kyuafile doesn't leak into base.txz.
Approved by: gjb
When FILES is defined in a Makefile that _also_ includes bsd.subdir.mk, the
build of the files (if any) was not properly triggered during the build
stage. This was because bsd.files.mk did not define the buildfiles target
if it was already defined... and bsd.subdir.mk defined this target on its
own, thus causing a conflict.
Fix this by unconditionally defining buildfiles from bsd.files.mk; this is
safe because nothing else in the tree needs to redefine this and because the
target itself contains no commands: all it does is define dependencies.
Also ensure that bsd.files.mk is always pulled in by bsd.test.mk regardless
of what bsd.prog.mk does.
These fixes allow "make installworld" to run cleanly on a system with
read-only src and obj trees.
This is "make tinderbox" clean.
Reviewed by: imp
Obtained from: jilles
