These commands show the route resolved for a specified destination, or
print out the entire routing table for a given address family (or all
families, if none is explicitly provided).
Discussed with: emaste
Differential Revision: https://reviews.freebsd.org/D21510
There are several mechanisms by which a vm_page reference is held,
preventing the page from being freed back to the page allocator. In
particular, holding the page's object lock is sufficient to prevent the
page from being freed; holding the busy lock or a wiring is sufficent as
well. These references are protected by the page lock, which must
therefore be acquired for many per-page operations. This results in
false sharing since the page locks are external to the vm_page
structures themselves and each lock protects multiple structures.
Transition to using an atomically updated per-page reference counter.
The object's reference is counted using a flag bit in the counter. A
second flag bit is used to atomically block new references via
pmap_extract_and_hold() while removing managed mappings of a page.
Thus, the reference count of a page is guaranteed not to increase if the
page is unbusied, unmapped, and the object's write lock is held. As
a consequence of this, the page lock no longer protects a page's
identity; operations which move pages between objects are now
synchronized solely by the objects' locks.
The vm_page_wire() and vm_page_unwire() KPIs are changed. The former
requires that either the object lock or the busy lock is held. The
latter no longer has a return value and may free the page if it releases
the last reference to that page. vm_page_unwire_noq() behaves the same
as before; the caller is responsible for checking its return value and
freeing or enqueuing the page as appropriate. vm_page_wire_mapped() is
introduced for use in pmap_extract_and_hold(). It fails if the page is
concurrently being unmapped, typically triggering a fallback to the
fault handler. vm_page_wire() no longer requires the page lock and
vm_page_unwire() now internally acquires the page lock when releasing
the last wiring of a page (since the page lock still protects a page's
queue state). In particular, synchronization details are no longer
leaked into the caller.
The change excises the page lock from several frequently executed code
paths. In particular, vm_object_terminate() no longer bounces between
page locks as it releases an object's pages, and direct I/O and
sendfile(SF_NOCACHE) completions no longer require the page lock. In
these latter cases we now get linear scalability in the common scenario
where different threads are operating on different files.
__FreeBSD_version is bumped. The DRM ports have been updated to
accomodate the KPI changes.
Reviewed by: jeff (earlier version)
Tested by: gallatin (earlier version), pho
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20486
If ipv4_prefer is specified, Section 10.3 is relevant.
If ipv6_prefer is specified, Section 2.1 is relevant.
This change makes the corresponding options/sections 'respective'
PR: docs/234249
Submitted by: David Fiander <david@fiander.info>
Both clang and gcc development branches have reached version 10. Since we
only parse for a single digit in the major version number, this causes
COMPILER_VERSION to be set to its default of 0.0.0, meaning version checks
fail with these newer compilers.
Reviewed by: emaste
Approved by: markj (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21413
We cannot use file (without :T) to name targets
but we can use the destination directory (with / replaced by _)
This has the benefit of minimizing the targets created.
Reviewed by: bdrewery
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org//D21283
The EXAMPLES section does not contain any examples of output formats for
the old-style scripts. Remove the misleading bits stating otherwise.
Reviewed by: bcr, imp
Approved by: src (imp)
Differential Revision: https://reviews.freebsd.org/D21552
A user may set ${name}_env variable in rc.conf(5) in order to set additional
environment variables for a service command. Unfortunately, at the moment
this variable is only honored when the command is specified via the command
variable. Those additional environment variables coming from ${name}_env
are never set if the service is started via the ${rc_arg}_cmd variable (for
example start_cmd).
PR: 239692
Reviewed by: bcr, jilles
Approved by: src (jilles)
Differential Revision: https://reviews.freebsd.org/D21228
The default package use to be FreeBSD-runtime but it should only contain
binaries and libs enough to boot to single user and repair the system, it
is also very handy to have a package that can be tranform to a small mfsroot.
So create a new package named FreeBSD-utilities and make it the default one.
Also move a few binaries and lib into this package when it make sense.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21506
All of them are needed to be able to boot to single user and be able
to repair a existing FreeBSD installation so put them directly into
FreeBSD-runtime.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21503
The page daemon periodically invokes uma_reclaim() to reclaim cached
items from each zone when the system is under memory pressure. This
is important since the size of these caches is unbounded by default.
However it also results in bursts of high latency when allocating from
heavily used zones as threads miss in the per-CPU caches and must
access the keg in order to allocate new items.
With r340405 we maintain an estimate of each zone's usage of its
(per-NUMA domain) cache of full buckets. Start making use of this
estimate to avoid reclaiming the entire cache when under memory
pressure. In particular, introduce TRIM, DRAIN and DRAIN_CPU
verbs for uma_reclaim() and uma_zone_reclaim(). When trimming, only
items in excess of the estimate are reclaimed. Draining a zone
reclaims all of the cached full buckets (the previous behaviour of
uma_reclaim()), and may further drain the per-CPU caches in extreme
cases.
Now, when under memory pressure, the page daemon will trim zones
rather than draining them. As a result, heavily used zones do not incur
bursts of bucket cache misses following reclamation, but large, unused
caches will be reclaimed as before.
Reviewed by: jeff
Tested by: pho (an earlier version)
MFC after: 2 months
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16667
- Fix warnings from igor and mandoc.
- Provide a brief description of the separation between zones and their
backend slab allocators.
- Document cache zones and secondary zones.
- Document the kernel config options added in r350659.
- Document the uma_zalloc_pcpu() and uma_zfree_pcpu() wrappers.
- Document uma_zone_reserve(), uma_zone_reserve_kva() and
uma_zone_prealloc().
- Document uma_zone_alloc() and uma_zone_freef().
- Add some missing MLINKs and Xrefs.
MFC after: 2 weeks
This makes it possible to perform mathematical operations on
fractional values without using floating point. It operates on Q
numbers, which are integer-sized, opaque structures initialized
to hold a chosen number of integer and fractional bits.
For a general description of the Q number system, see the "Fixed Point
Representation & Fractional Math" whitepaper[1]; for the actual
API see the qmath(3) man page.
This is one of dependencies for the upcoming stats(3) framework[2]
that will be applied to the TCP stack in a later commit.
1. https://www.superkits.net/whitepapers/Fixed%20Point%20Representation%20&%20Fractional%20Math.pdf
2. https://reviews.freebsd.org/D20477
Reviewed by: bcr (man pages, earlier version), sef (earlier version)
Discussed with: cem, dteske, imp, lstewart
Sponsored By: Klara Inc, Netflix
Obtained from: Netflix
Differential Revision: https://reviews.freebsd.org/D20116
KTLS adds support for in-kernel framing and encryption of Transport
Layer Security (1.0-1.2) data on TCP sockets. KTLS only supports
offload of TLS for transmitted data. Key negotation must still be
performed in userland. Once completed, transmit session keys for a
connection are provided to the kernel via a new TCP_TXTLS_ENABLE
socket option. All subsequent data transmitted on the socket is
placed into TLS frames and encrypted using the supplied keys.
Any data written to a KTLS-enabled socket via write(2), aio_write(2),
or sendfile(2) is assumed to be application data and is encoded in TLS
frames with an application data type. Individual records can be sent
with a custom type (e.g. handshake messages) via sendmsg(2) with a new
control message (TLS_SET_RECORD_TYPE) specifying the record type.
At present, rekeying is not supported though the in-kernel framework
should support rekeying.
KTLS makes use of the recently added unmapped mbufs to store TLS
frames in the socket buffer. Each TLS frame is described by a single
ext_pgs mbuf. The ext_pgs structure contains the header of the TLS
record (and trailer for encrypted records) as well as references to
the associated TLS session.
KTLS supports two primary methods of encrypting TLS frames: software
TLS and ifnet TLS.
Software TLS marks mbufs holding socket data as not ready via
M_NOTREADY similar to sendfile(2) when TLS framing information is
added to an unmapped mbuf in ktls_frame(). ktls_enqueue() is then
called to schedule TLS frames for encryption. In the case of
sendfile_iodone() calls ktls_enqueue() instead of pru_ready() leaving
the mbufs marked M_NOTREADY until encryption is completed. For other
writes (vn_sendfile when pages are available, write(2), etc.), the
PRUS_NOTREADY is set when invoking pru_send() along with invoking
ktls_enqueue().
A pool of worker threads (the "KTLS" kernel process) encrypts TLS
frames queued via ktls_enqueue(). Each TLS frame is temporarily
mapped using the direct map and passed to a software encryption
backend to perform the actual encryption.
(Note: The use of PHYS_TO_DMAP could be replaced with sf_bufs if
someone wished to make this work on architectures without a direct
map.)
KTLS supports pluggable software encryption backends. Internally,
Netflix uses proprietary pure-software backends. This commit includes
a simple backend in a new ktls_ocf.ko module that uses the kernel's
OpenCrypto framework to provide AES-GCM encryption of TLS frames. As
a result, software TLS is now a bit of a misnomer as it can make use
of hardware crypto accelerators.
Once software encryption has finished, the TLS frame mbufs are marked
ready via pru_ready(). At this point, the encrypted data appears as
regular payload to the TCP stack stored in unmapped mbufs.
ifnet TLS permits a NIC to offload the TLS encryption and TCP
segmentation. In this mode, a new send tag type (IF_SND_TAG_TYPE_TLS)
is allocated on the interface a socket is routed over and associated
with a TLS session. TLS records for a TLS session using ifnet TLS are
not marked M_NOTREADY but are passed down the stack unencrypted. The
ip_output_send() and ip6_output_send() helper functions that apply
send tags to outbound IP packets verify that the send tag of the TLS
record matches the outbound interface. If so, the packet is tagged
with the TLS send tag and sent to the interface. The NIC device
driver must recognize packets with the TLS send tag and schedule them
for TLS encryption and TCP segmentation. If the the outbound
interface does not match the interface in the TLS send tag, the packet
is dropped. In addition, a task is scheduled to refresh the TLS send
tag for the TLS session. If a new TLS send tag cannot be allocated,
the connection is dropped. If a new TLS send tag is allocated,
however, subsequent packets will be tagged with the correct TLS send
tag. (This latter case has been tested by configuring both ports of a
Chelsio T6 in a lagg and failing over from one port to another. As
the connections migrated to the new port, new TLS send tags were
allocated for the new port and connections resumed without being
dropped.)
ifnet TLS can be enabled and disabled on supported network interfaces
via new '[-]txtls[46]' options to ifconfig(8). ifnet TLS is supported
across both vlan devices and lagg interfaces using failover, lacp with
flowid enabled, or lacp with flowid enabled.
Applications may request the current KTLS mode of a connection via a
new TCP_TXTLS_MODE socket option. They can also use this socket
option to toggle between software and ifnet TLS modes.
In addition, a testing tool is available in tools/tools/switch_tls.
This is modeled on tcpdrop and uses similar syntax. However, instead
of dropping connections, -s is used to force KTLS connections to
switch to software TLS and -i is used to switch to ifnet TLS.
Various sysctls and counters are available under the kern.ipc.tls
sysctl node. The kern.ipc.tls.enable node must be set to true to
enable KTLS (it is off by default). The use of unmapped mbufs must
also be enabled via kern.ipc.mb_use_ext_pgs to enable KTLS.
KTLS is enabled via the KERN_TLS kernel option.
This patch is the culmination of years of work by several folks
including Scott Long and Randall Stewart for the original design and
implementation; Drew Gallatin for several optimizations including the
use of ext_pgs mbufs, the M_NOTREADY mechanism for TLS records
awaiting software encryption, and pluggable software crypto backends;
and John Baldwin for modifications to support hardware TLS offload.
Reviewed by: gallatin, hselasky, rrs
Obtained from: Netflix
Sponsored by: Netflix, Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21277
As discussed on arch@, gcc 4.2.1 is on its way out. Turn off Werror on gcc
versions < 5.0 permantly. This will allow older platforms to continue to compile
w/o new errors once we take them out of universe by default. This will also free
developers from chasing down obsolete warnings that produce no beneficial
changes to the source.
Discussed on: arch@
Reviewed by: jhb@, emaste@, pfg@
Differential Revision: https://reviews.freebsd.org/D21378
They follow the conventions set by rw and sx lock probes. There is
an additional lockstat:::lockmgr-disown probe.
Update lockstat(1) to report on contention and hold events for
lockmgr locks. Document the new probes in dtrace_lockstat.4, and
deduplicate some of the existing probe descriptions.
Reviewed by: mjg
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21355
This adds safety net for the case of misconfigured NTB with too big
memory window, for which we may be unable to allocate a memory buffer,
which does not make much sense for the network interface. While there,
fix the code to really work with asymmetric window sizes setup.
This makes driver just print warning message on boot instead of hanging
if too large memory window is configured.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
expression howmany(BBSIZE, PAGE_SIZE), where BBSIZE is the size of the
boot block area. That can be less than 2 if PAGE_SIZE is big.
swapon(8) has an option to trim (delete) all the blocks of a device at
startup. However, if the first of those blocks is a bsd label, then
trimming those blocks is destructive. Change swapon to leave the
first BBSIZE bytes untrimmed.
Update manual pages to reflect changes in how swapon and how it may be
used, espeically in association with savecore.
Reviewed by: alc
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21191
