instead of /libexec/ld-elf.so.1. Below in the Makefile we execute
'chflags noschg ${DESTDIR}/usr/libexec/ld-elf.so.1', which follows
symlink and removes 'schg' flag from system's /libexec/ld-elf.so.1
instead of the one in DESTDIR. It is also more friendly to use
replative paths in symlink in case of jail/chroot environments.
Obtained from: WHEEL Systems
MFC after: 2 weeks
- Do not limit recent processors to "prescott" class for i386 target. There
is no reason for this hack because clang is default now. On top of that, it
will only grow indefinitely over time.
- Add more CPUTYPEs, i.e., "athlon-fx", "core-avx2", "atom", "penryn", and
"yonah". Note "penryn" and "yonah" are intentionally undocumented because
they are not supported by gcc and marked deprecated by clang.
- Add more CPUTYPE aliases, i.e., "barcelona" (-> amdfam10), "westmere" and
"nehalem" (-> corei7). Note these are intentionally undocumented because
they are not supported by (base) gcc and/or clang. However, LLVM (backend)
seems to "know" the differences. Most likely, they were deprecated with
other vendor code names and clang did not bother implementing them at all.
- Add i686 to MACHINE_CPU for "c3-2" (VIA Nehemiah). Both gcc & clang treat
it like an i686-class processor.
- Add IDT "winchip2" and "winchip-c6" for completeness (undocumented).
- Order processors per make.conf example, i.e., CPU vendors and models.
- Tidy up make.conf example, i.e., remove "by gcc" (because we have aliases)
and remove "prescott" from AMD64 architecture (because it is not correct).
over the active list. The mount interlock is not enough to guarantee
the validity of the tailq link pointers. The __mnt_vnode_next_active()
and __mnt_vnode_first_active() active lists iterators helper functions
did not provided the neccessary stability for the list, allowing the
iterators to pick garbage.
This was uncovered after the r243599 made the active list iterators
non-nop.
Since a vnode interlock is before the vnode_free_list_mtx, obtain the
vnode ilock in the non-blocking manner when under vnode_free_list_mtx,
and restart iteration after the yield if the lock attempt failed.
Assert that a vnode found on the list is active, and assert that the
helpers return the vnode with interlock owned.
Reported and tested by: pho
MFC after: 1 week
Note that a preprocessor cannot output an empty file, since that
is interpreted as meaning there is no replacement, and the origi-
nal file is used. To avoid this, if LESSOPEN starts with two ver-
tical bars, the exit status of the script becomes meaningful. If
the exit status is zero, the output is considered to be replace-
ment text, even if it empty. If the exit status is nonzero, any
output is ignored and the original file is used. For compatibil-
ity with previous versions of less, if LESSOPEN starts with only
one vertical bar, the exit status of the preprocessor is ignored.
Use two pipe symbols for zless, so that zless'ing a compressed empty
file will give output rather than being interpreted as its compressed
form, which is typically a binary.
Thanks Mark Nudelman for pointing out this difference and the
suggested solution.
Reported by: Matthias Meyser <meyser xenet.de>
PR: bin/168839
MFC after: 2 weeks
thought I've decided its overkill,a simple tuneable for
each RX and TX limit, and then init sets the ring values
based on that, should be sufficient.
More importantly, fix a bug causing a panic, when changing
the define style to IXGBE_LEGACY_TX a taskqueue init was
inadvertently set #ifdef when it should be #ifndef.
UPDATING by URL.
As there has been some confusion over the need to run "mergemaster -p",
part of our standard upgrade procedure, following the recent addition of
an "auditdistd" user, add a note about it to UPDATING explicitly.
I couldn't think of a way to maintain the hardware TXQ locks _and_ layer
on top of that per-TXQ software queuing and any other kind of fine-grained
locks (eg per-TID, or per-node locks.)
So for now, to facilitate some further code refactoring and development
as part of the final push to get software queue ps-poll and u-apsd handling
into this driver, just do away with them entirely.
I may eventually bring them back at some point, when it looks slightly more
architectually cleaner to do so. But as it stands at the present, it's
not really buying us much:
* in order to properly serialise things and not get bitten by scheduling
and locking interactions with things higher up in the stack, we need to
wrap the whole TX path in a long held lock. Otherwise we can end up
being pre-empted during frame handling, resulting in some out of order
frame handling between sequence number allocation and encryption handling
(ie, the seqno and the CCMP IV get out of sequence);
* .. so whilst that's the case, holding the lock for that long means that
we're acquiring and releasing the TXQ lock _inside_ that context;
* And we also acquire it per-frame during frame completion, but we currently
can't hold the lock for the duration of the TX completion as we need
to call net80211 layer things with the locks _unheld_ to avoid LOR.
* .. the other places were grab that lock are reset/flush, which don't happen
often.
My eventual aim is to change the TX path so all rejected frame transmissions
and all frame completions result in any ieee80211_free_node() calls to occur
outside of the TX lock; then I can cut back on the amount of locking that
goes on here.
There may be some LORs that occur when ieee80211_free_node() is called when
the TX queue path fails; I'll begin to address these in follow-up commits.
which dumps out the actual options being used by an NFS mount.
This will be used to implement a "-m" option for nfsstat(1).
Reviewed by: alfred
MFC after: 2 weeks
This brand of controllers expects that the number of
contexts specified in the input slot context points
to an active endpoint context, else it refuses to
operate.
- Ring the correct doorbell when streams mode is used.
- Wrap one or two long lines.
Tested by: Markus Pfeiffer (DragonFlyBSD)
MFC after: 1 week
The changes were derived from what has been committed to NetBSD, with
modifications. These are:
1. Preserve the existsing GLOB_LIMIT behaviour by including the number
of matches to the set of parameters to limit.
2. Change some of the limits to avoid impacting normal use cases:
GLOB_LIMIT_STRING - change from 65536 to ARG_MAX so that glob(3)
can still provide a full command line of expanded names.
GLOB_LIMIT_STAT - change from 128 to 1024 for no other reason than
that 128 feels too low (it's not a limit that impacts the
behaviour of the test program listed in CVE-2010-2632).
GLOB_LIMIT_PATH - change from 1024 to 65536 so that glob(3) can
still provide a fill command line of expanded names.
3. Protect against buffer overruns when we hit the GLOB_LIMIT_STAT or
GLOB_LIMIT_READDIR limits. We append SEP and EOS to pathend in
those cases. Return GLOB_ABORTED instead of GLOB_NOSPACE when we
would otherwise overrun the buffer.
This change also modifies the existing behaviour of glob(3) in case
GLOB_LIMIT is specifies by limiting the *new* matches and not all
matches. This is an important distinction when GLOB_APPEND is set or
when the caller uses a non-zero gl_offs. Previously pre-existing
matches or the value of gl_offs would be counted in the number of
matches even though the man page states that glob(3) would return
GLOB_NOSPACE when gl_matchc or more matches were found.
The limits that cannot be circumvented are GLOB_LIMIT_STRING and
GLOB_LIMIT_PATH all others can be crossed by simply calling glob(3)
again and with GLOB_APPEND set.
The entire description above applies only when GLOB_LIMIT has been
specified of course. No limits apply when this flag isn't set!
Obtained from: Juniper Networks, Inc
Programming the low bits has a side-effect if unmasking the pin if it is
not disabled. So if an interrupt was pending then it would be delivered
with the correct new vector but to the incorrect old LAPIC.
This fix could be made clearer by preserving the mask bit while
programming the low bits and then explicitly resetting the mask bit
after all the programming is done.
Probability to trip over the fixed bug could be increased by bootverbose
because printing of the interrupt information in ioapic_assign_cpu
lengthened the time window during which an interrupt could arrive while
a pin is masked.
Reported by: Andreas Longwitz <longwitz@incore.de>
Tested by: Andreas Longwitz <longwitz@incore.de>
MFC after: 12 days
Also, make it explicit that V_XATTRDIR is not properly supported in gfs
code yet.
The bad code was plain incorrect: (a) it spoiled handling of v_usecount
reaching zero and (b) it leaked v_holdcnt.
The ugly code employs potentially unsafe locking tricks.
Ideally we should separate vnode lifecycle and gfs node lifecycle.
A gfs node should have its own reference count where its child nodes
should be accounted.
PR: kern/151111
Reviewed by: kib
MFC after: 13 days
