Commit Graph

28 Commits

Author SHA1 Message Date
Mark Johnston
0203558fe6 Be sure to actually decrement the "count" parameter for each processed
descriptor so that we return when the threshold has been reached.

Reviewed by:	yongari
MFC after:	1 week
2013-06-17 22:59:47 +00:00
Pyun YongHyeon
088dd4b78a Rework jumbo frame handling. QAC confirmed that the controller
requires 8 bytes alignment on RX buffer.  Given that non-jumbo
frame works on any alignments I guess this DMA limitation for RX
buffer could be jumbo frame specific one.  Also I'm not sure
whether this DMA limitation is related with 64bit DMA.  Previously
age(4) disabled 64bit DMA addressing due to silent data corruption.
So we may need more testing on re-enabling 64bit DMA in future.

While I'm here, change mbuf chaining algorithm to use fixed sized
buffer and force software checksum if controller reports length
error. According to QAC, RFD is not updated at all for jumbo frame
so it works just like alc(4) controllers.  This change also added
alignment fixup for strict alignment architectures.  Because I'm
not aware of any non-x86 machines that use age(4) controllers it's
just for completeness at this moment.

Wit this change, jumbo frame should work with age(4).

Tested by:	Christian Gusenbauer < c47g <> gmx dot at >
MFC after:	1 week
2013-02-05 00:37:45 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Pyun YongHyeon
9bdff6fffa TSO engine of L1 requires a separate DMA descriptor for TCP
payload.  This means driver has to split a TX buffer into two
pieces of TX buffers when the TX buffer contains both
ethernet/IP/TCP header and partial TCP payload.  The controller
does not require all header should be in a TX buffer but driver
forced it to compute IP/TCP header size/offset which is required
parameter to configure DMA descriptor for TSO.
While here, slightly reorder DMA descriptor setup to enhance
readability and remove unnecessary code for TSO(upper stack never
requests TSO when the frame length is less than or equal to MTU).

Reported by:	Yamagi Burmeister <lists <> yamagi dot org>
Tested by:	Yamagi Burmeister <lists <> yamagi dot org>
MFC After:	1 week
2012-10-30 07:55:03 +00:00
Pyun YongHyeon
57c81d92ae Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.
Because driver is accessing a common MII structure in
mii_pollstat(), updating user supplied structure should be done
before dropping a driver lock.

Reported by:	Karim (fodillemlinkarimi <> gmail dot com)
2011-10-17 19:49:00 +00:00
Marius Strobl
3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
Pyun YongHyeon
595615e6a4 Partially revert r184106. RX buffer ring also needs bus_dmamap_sync().
Tested by:	Yamagi Burmeister (lists <> yamagi dot org)
MFC after:	1 week
2011-04-01 18:53:41 +00:00
Pyun YongHyeon
525e40979b 64bit DMA caused data corruption. Unfortunately there is no known
workaround to use 64bit DMA.
Disable 64bit DMA on Attansic L1 controller.

Tested by:	Yamagi Burmeister (lists <> yamagi dot org)
MFC after:	1 week
2011-04-01 16:45:26 +00:00
John Baldwin
3b0a4aef96 Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
pci_find_cap() instead.
2011-03-23 13:10:15 +00:00
John Baldwin
86a11f3a96 Forgot to remove unlock of the driver lock from age_start_locked() when
converting it to a locked variant.

PR:		kern/153948
2011-01-13 13:04:49 +00:00
John Baldwin
32341ad63c Add a 'locked' variant of the foo_start() routine and call it directly
from interrupt handlers and watchdog routines instead of queueing a task
to call foo_start().

Reviewed by:	yongari
MFC after:	1 month
2011-01-03 18:28:30 +00:00
Marius Strobl
8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
Pyun YongHyeon
96486faa6e Make sure to not use stale ip/tcp header pointers. The ip/tcp
header parser uses m_pullup(9) to get access to mbuf chain.
m_pullup(9) can allocate new mbuf chain and free old one if the
space left in the mbuf chain is not enough to hold requested
contiguous bytes. Previously drivers can use stale ip/tcp header
pointer if m_pullup(9) returned new mbuf chain.

Reported by:	Andrew Boyer (aboyer <> averesystems dot com)
MFC after:	10 days
2010-10-14 18:31:40 +00:00
Pyun YongHyeon
3ca447da3d Remove unnecessary controller reinitialization.
PR:	kern/87506
2010-08-24 19:41:15 +00:00
Pyun YongHyeon
6da6d0a9e3 With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify
drivers to take into account for the change. Basically CSUM_TSO
should be checked before checking CSUM_TCP.
2010-04-19 22:10:40 +00:00
Pyun YongHyeon
0fe060a8f5 Add TSO support on VLANs. While I'm here remove unnecessary check
of VLAN hardware checksum offloading. vlan(4) already takes care of
this.
2010-02-26 22:43:23 +00:00
Pyun YongHyeon
cb2cdeceb5 Fix multicast handling. All Atheros controllers use big-endian form
in computing multicast hash.

PR:	kern/139137
2009-09-29 23:03:16 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Pyun YongHyeon
e32035ce1e pci(4) handles PCIM_CMD_INTxDIS so there is no need to poke this
bit in driver.
2009-05-20 03:33:27 +00:00
Pyun YongHyeon
06ca18c161 o Don't access VPD even if hardware advertised the capability.
It seems that some revision of controller hang while accessing
  the VPD. Because VPD access routine are unused, nuke it.
o Let TWSI reload EEPROM if VPD capability is detected. Reloading
  EEPROM will also set ethernet address so age(4) now reads AGE_PAR0
  and AGE_PAR1 register to get ethernet address. This removes a lot
  of hack and enhance readability a lot.
o Double PHY reset timeout as it takes more time to take PHY out of
  power-saving state.
o Explicitly check power-saving state by checking undocumented PHY
  registers. If link is not up, poke undocumented registers to take
  PHY out of power-saving state. This is the same way what Linux
  does. On resume, make sure to wake up PHY.
o Don't rely on auto-clearing feature of master reset bit, just wait
  1ms and check idle status of MAC.
o Add PCI device revision information in bootverbose mode.
This should fix occasional controller hang in device attach phase.

Reported by:	barbara < barbara.xxx1975 at libero DOT it >
Tested by:	barbara < barbara.xxx1975 at libero DOT it >
2009-03-28 07:39:35 +00:00
Pyun YongHyeon
df284b3c3a Fix inversed logic. pci_find_extcap() returns 0 when it finds
specified capability.
2009-03-23 00:27:46 +00:00
Pyun YongHyeon
dca3a3a011 Remove informational messages left. These messages were intended to
show up in verbose boot mode.

Reported by:	pluknet ( pluknet<> gmail DOT com )
2008-11-07 07:02:28 +00:00
Kevin Lo
8dd3202c26 Remove unused age_txdq 2008-10-21 03:18:02 +00:00
Kevin Lo
381a7c1a83 No need to sync descriptors twice in age_rxintr() 2008-10-21 03:16:50 +00:00
Kevin Lo
7cdd50e189 Fix a typo: jme -> age 2008-08-14 02:43:18 +00:00
Pyun YongHyeon
91216e1ef1 Use DELAY() instead of pause if waiting time is less than 1ms.
This will fix driver hang if hz < 1000.

Pointed out by:	thompsa
2008-07-18 01:00:54 +00:00
Rui Paulo
5a9555b9aa Fix typo in comment. 2008-06-08 14:42:43 +00:00
Pyun YongHyeon
16199571c5 Add age(4), a driver for Attansic/Atheros L1 gigabit ethernet
controller. L1 has several threshold/timer registers and they
seem to require careful tuned parameters to get best
performance. Datasheet for L1 is not available to open source
driver writers so age(4) focus on stability and correctness of
basic Tx/Rx operation. ATM the performance of age(4) is far from
optimal which in turn means there are mis-programmed registers or
incorrectly configured registers.
Currently age(4) supports all known hardware assistance including
  - MSI support.
  - TCP Segmentation Offload.
  - Hardware VLAN tag insertion/stripping.
  - TCP/UDP checksum offload.
  - Interrupt moderation.
  - Hardware statistics counter support.
  - Jumbo frame support.
  - WOL support.

L1 gigabit ethernet controller is mainly found on ASUS
motherboards. Note, it seems that there are other variants of
hardware as known as L2(Fast ethernet) and newer gigabit ethernet
(AR81xx) from Atheros. These are not supported by age(4) and
requires a seperate driver. Big thanks to all people who reported
feedback or tested patches.

Tested by:	kevlo, bsam, Francois Ranchin < fyr AT fyrou DOT net >
		Thomas Nystroem < thn AT saeab DOT se >
		Roman Pogosyan < asternetadmin AT gmail DOT com >
		Derek Tattersal < dlt AT mebtel DOT net >
		Oliver Seitz < karlkiste AT yahoo DOT com >
2008-05-19 01:39:59 +00:00