can be found at
https://wiki.freebsd.org/SummerOfCode2016/HDAudioEmulationForBhyve
This commit has evolved from the original work to include Capsicum
integration. As part of that, it only opens the host audio devices once
and leaves them open, instead of opening and closing them on each guest
access. Thanks to Peter Grehan and Marcelo Araujo for their help in
bringing the work forward and providing some of the final techncial push.
Submitted by: Alex Teaca <iateaca@freebsd.org>
Differential Revision: D7840, D12419
The seg_max value reported to the guest should be two less than the
host's maximum, in order to leave room for the request and the
response. This is analogous to r347033 for virtio_block.
We hit the "too many segments to enqueue" assertion on OneFS because
we increase MAXPHYS to 256 KB.
Reviewed by: bryanv
Discussed with: cem jhb rgrimes
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20529
bsnmpd(1) main does that early on init and the connection is available
to all loaded modules
Event: Vienna Hackathon 2019
PR: 233431 , 221487
MFC after: 2 weeks
Otherwise duplicate messages can trigger a reinitialization of the
compression stream while the update thread is running. Also ensure
that the stream is initialized before the update thread may attempt
to use it.
PR: 238333
Reviewed by: cem, rgrimes
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20673
The vsc_rx_ready and the RX virtqueue is protected by the rx_mtx lock.
However, pci_vtnet_ping_rxq() (currently called only once after each
device reset) accesses those without acquiring the lock.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20609
can be combined with configuring the period and duty cycle (the same ioctl
sets all 3 values at once, so there's no reason to require the user to run
the program twice to get all 3 things set).
The driver now names its cdev nodes pwmcX.Y where X is unit number and
Y is the channel within that unit. Change the default device name from
pwmc0 to pwmc0.0. The driver now puts cdev files and label aliases in
the /dev/pwm directory, so allow the user to provide unqualified names
with -f and automatically prepend the /dev/pwm part for them.
Update the examples in the manpage to show the new device name format
and location within /dev/pwm.
ioctl definitions and related datatypes that allow userland control of pwm
hardware via the pwmc device. The new name and location better reflects its
assocation with a single device driver.
Both virtio_net and e82545 network frontends have code to validate and
generate MAC addresses. These functionalities are replicated in the two
files, so we move them in a separate compilation unit.
Reviewed by: rgrimes, bryanv, imp, kevans
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20626
The VirtIO standard supports two schemes for notification suppression:
a notification enable bit and a more sophisticated one (event_idx) that
also supports delayed notifications. Currently bhyve fully supports
only the first scheme. This patch hides the notification suppression
internals by means of two inline routines, vq_kick_enable() and
vq_kick_disable(), and makes the code more readable.
Moreover, further improve readability by replacing the call to mb()
with a call to atomic_thread_fence_seq_cst(), which is already used
in virtio.c
Reviewed by: pmooney_pfmooney.com, bryanv
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20581
On vtnet device reset it is necessary to wait for threads to stop TX and
RX processing. However, the rx_in_progress variable (used for to wait for
RX processing to stop) is actually useless, and can be removed. Acquiring
and releasing the RX lock is enough to synchronize correctly. Moreover,
it is possible to reset the device while holding both TX and RX locks, so
that the "resetting" variable becomes unnecessary for the RX thread, and
can be protected by the TX lock (instead of being volatile).
Reviewed by: jhb, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20543
The NVMe CAM driver reports the PCIe Link Capability and Status for
devices. For emulated bhyve NVMe devices, this looks like:
nda0: nvme version 1.3 x63 (max x63) lanes PCIe Gen15 (max Gen15) link
The driver outputs this because the emulated device doesn't include the
PCIe Capability structure. The NVMe specification requires these
registers, so the fix is to add this set of capability registers to the
emulated device.
Note that PCI Express devices that are integrated into the Root Complex
(i.e. Bus 0x0) do not have to support the Link Capability or Status
registers. Windows will fail to start (i.e. Code 10) devices that appear
to be part of the Root Complex but report being a PCI Express Endpoint.
So also add a check to pci_emul_add_pciecap() to check if the device is
integrated and change the device type.
Reviewed by: imp, ken, araujo, jhb, rgrimes
Approved by: imp (mentor), ken (mentor), jhb (maintainer)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19904
This ensures that bhyve properly recognizes when decoding is disabled
for BARs on passthru devices. To properly handle writes to the
register, export a pci_emul_cmd_changed function from pci_emul.c that
the pass through device model invokes for config writes that change
PCIR_COMMAND.
Reviewed by: rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20531
Rather than uncoditionally setting the MEMEN and PORTEN bits in
PCIR_COMMAND for PCI devices, set the respective bit when the first
BAR of a given type is added to the device. This more closely matches
what firmware does on bare metal.
BUSMASTEREN is still set unconditionally. Eventually this bit should
move into the device models as not all device models need this set.
Reviewed by: rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20530
Coverity warned about gdb_write_mem sign extending the result of
parse_byte shifted left by 24 bits when generating a 32-bit memory
write value for MMIO. Simplify the code by using parse_integer
instead of unrolled parse_byte calls.
CID: 1401600
Reviewed by: cem
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20508
bhyve has to virtualize the MSI-X table to trap reads and writes to
that table and map those to virtual interrupts that it maps real host
interrupts on to. For the pending-bit-array (PBA), bhyve passes
accesses from the guest directly to the hardware.
bhyve's virtualization of the MSI-X table is done by intercepting all
reads and writes to the BAR holding the MSI-X table. However, if the
PBA is stored in the same BAR as the MSI-X table, accesses to the PBA
portion of this BAR have to be forwarded to the real BAR.
However, in the case that the PBA was stored in a separate BAR and
it's offset in that separate BAR overlapped with the portion of the
MSI-X table BAR that the table used, the handlers for the table BAR
would incorrectly think that some accesses were PBA reads and writes.
This caused a crash in bhyve when it indirected a NULL pointer. Fix
this case by never trying to handle PBA access if the PBA lives in a
separate BAR.
Reported by: gallatin
Tested by: gallatin
Reviewed by: markj, Patrick Mooney
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20523
I believe this was introduced in the original '-r' commit, r231911 (2012).
At the time, the scope was limited to a 1 second sleep. r332518 (2018)
added '-R', which increased the potential duration of the affected interval
(from 1 to N seconds) by permitting arbitrary restart intervals.
Instead, handle SIGTERM normally during restart-sleep, when the monitored
process is not running, and shut down promptly.
(I noticed this behavior when debugging a child process that exited quickly
under the 'daemon -r -R 30' environment. 'kill <daemonpid>' had no
immediate effect and the monitor process slept until the next restart
attempt. This was annoying.)
Reviewed by: allanjude, imp, markj
Differential Revision: https://reviews.freebsd.org/D20509
Without this patch, mountd would delete/load all exports from the exports
file(s) when it receives a SIGHUP. This works fine for small exports file(s),
but can take several seconds to do when there are large numbers (10000+) of
exported file systems. Most of this time is spent doing the system calls
that delete/export each of these file systems. When the "-S" option
has been specified (the default these days), the nfsd threads are suspended
for several seconds while the reload is done.
This patch changes mountd so that it only does system calls for file systems
where the exports have been changed/added/deleted as compared to the exports
done for the previous load/reload of the exports file(s).
Basically, when SIGHUP is posted to mountd, it saves the exportlist structures
from the previous load and creates a new set of structures from the current
exports file(s). Then it compares the current with the previous and only does
system calls for cases that have been changed/added/deleted.
The nfsd threads do not need to be suspended until the comparison step is
being done. This results in a suspension period of milliseconds for a server
with 10000+ exported file systems.
There is some code using a LOGDEBUG() macro that allow runtime debugging
output via syslog(LOG_DEBUG,...) that can be enabled by creating a file
called /var/log/mountd.debug. This code is expected to be replaced with
code that uses dtrace by cy@ in the near future, once issues w.r.t. dtrace
in stable/12 have been resolved.
The patch should not change the usage of the exports file(s), but improves
the performance of reloading large exports file(s) where there are only a
small number of changes done to the file(s).
Tested by: pen@lysator.liu.se
PR: 237860
Reviewed by: kib
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20487
install -> ${INSTALL}
mtree -> ${MTREE_CMD}
services_mkdb -> ${SERVICES_MKDB_CMD}
cap_mkdb -> ${CAP_MKDB_CMD}
pwd_mkdb -> ${PWD_MKDB_CMD}
kldxref -> ${KLDXREF_CMD}
If you do custom FreeBSD builds you may want to override those
in some cases.
Sponsored by: Sippy Software, Inc.
mountd.c uses a single linked list of "struct exportlist" structures,
where there is one of these for each exported file system on the NFS server.
This list gets long if there are a large number of file systems exported and
the list must be searched for each line in the exports file(s) when
SIGHUP causes the exports file(s) to be reloaded.
A simple benchmark that traverses SLIST() elements and compares two 32bit
fields in the structure for equal (which is what the search is)
appears to take a couple of nsec. So, for a server with 72000 exported file
systems, this can take about 5sec during reload of the exports file(s).
By replacing the single linked list with a hash table with a target of
10 elements per list, the time should be reduced to less than 1msec.
Peter Errikson (who has a server with 72000+ exported file systems) ran
a test program using 5 hashes to see how they worked.
fnv_32_buf(fsid,..., 0)
fnv_32_buf(fsid,..., FNV1_32_INIT)
hash32_buf(fsid,..., 0)
hash32_buf(fsid,..., HASHINIT)
- plus simply using the low order bits of fsid.val[0].
The first three behaved about equally well, with the first one being
slightly better than the others.
It has an average variation of about 4.5% about the target list length
and that is what this patch uses.
Peter Errikson also tested this hash table version and found that the
performance wasn't measurably improved by a larger hash table, so a
load factor of 10 appears adequate.
Tested by: pen@lysator.liu.se (with other patches)
PR: 237860
MFC after: 1 month
Probably due to historical reasons the driver uses In/Out arguments in
odd way. While this tool still never uses Out arguments to see that,
make the code to not trigger EINVAL in possible future uses.
MFC after: 2 weeks
struct xucred. Do not bump XUCRED_VERSION as struct layout is not changed.
PR: 215202
Reviewed by: tijl
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20415
MDT_MODULE info is required to be ordered before any other MDT metadata for
a given kld because it serves as an implicit record boundary between
distinct klds for linker.hints consumers. kldxref(8) has previously relied
on the assumption that MDT_MODULE was ordered relative to other module
metadata in kld objects by source code ordering.
However, C does not require implementations to emit file scope objects in
any particular order, and it seems that GCC 6.4.0 and/or binutils 2.32 ld
may reorder emitted objects with respect to source code ordering.
So: just take two passes over a given .ko's module metadata, scanning for
the MDT_MODULE on the first pass and the other metadata on subsequent
passes. It's not super expensive and not exactly a performance-critical
piece of code. This ensures MDT_MODULE is always ordered before
MDT_PNP_INFO and other MDTs, regardless of compiler/linker movement. As a
fringe benefit, it removes the requirement that care be taken to always
order MODULE_PNP_INFO after DRIVER_MODULE in source code.
Reviewed by: emaste, imp
Differential Revision: https://reviews.freebsd.org/D20405
This doesn't recognize any features yet, but does parse the features
string. It advertises an arbitrary packet size of 4k.
Reviewed by: markj, Scott Phillips <d.scott.phillips@intel.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20308
- Add a write_mem counterpart to read_mem to handle writes to MMIO.
- Add support for the GDB 'M' packet to write bytes to the guest's
memory. For MMIO writes, attempt to batch writes up into words.
This is imprecise, but if you write a single 2 or 4-byte aligned
word, it should be treated as a single MMIO write operation.
- While here, tidy up the parsing of the 'm' command used for reading
memory to match 'M'.
Reviewed by: markj, Scott Phillips <d.scott.phillips@intel.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20307
Use the .PATH mechanism instead so keep installing them from lib/libc/gen
While here revert 347961 and 347893 which are no longer needed
Discussed with: manu
Tested by: manu
ok manu@
Rather than the tedious and error-prone grep of sys/conf/newvers.sh,
use the new -v arg to dig out the data that's desired.
Differential Revision: https://reviews.freebsd.org/D19849
Some i2c controller hardware does not provide a way to do individual START,
REPEAT-START and STOP actions on the i2c bus. Instead, they can only do
a complete transfer as a single operation. Typically they can do either
START-data-STOP or START-data-REPEATSTART-data-STOP. In the i2c driver
framework, this corresponds to the iicbus_transfer method. In the userland
interface they are initiated with the I2CRDWR ioctl command.
These changes add a new 'tr' mode which can be specified with the '-m'
command line option. This mode should work on all hardware; when an i2c
controller driver doesn't directly support the iicbus_transfer method,
code in the i2c driver framework uses the lower-level START/REPEAT/STOP
methods to implement the transfer. After this new mode has gotten some
testing on various hardware, the 'tr' mode should probably become the
new default mode.
PR: 189914
It's invalid to reference a C++ string's c_str() buffer after the object
goes out of scope. Adjust the scope of the string to match the use in
write(2) to fix the misuse.
CID: 1393383
Reported by: Coverity
ed(4) and ep(4) have been removed. fxp(4) remains popular in older
systems, but isn't as future proof as em(4).
Reviewed by: bz, jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20311
Under certain tight race conditions, we found that the lack of a memory
barrier in bhyve's virtio handling causes it to miss a NO_NOTIFY state
transition on block devices, resulting in guest stall. The investigation
is recorded in OS-7613. As part of the examination into bhyve's use of
barriers, one other section was found to be problematic, but only on
non-x86 ISAs with less strict memory ordering. That was addressed in
this patch as well, although it was not at all a problem on x86.
PR: 231117
Submitted by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: jhb, kib, rgrimes
Approved by: jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19501
Check the legacy directory and use it instead if present.
Install these first if using beinstall.
UPDATING entry to follow.
Approved by: allanjude (mentor, in person)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20279
leap-seconds file from NIST at ftp://ftp.nist.gov/pub/time.
Future updates should use the NIST version of file, available
at ftp://ftp.nist.gov/pub/time/leap-seconds.list .
Requested by: ian@
Obtained from: ftp://ftp.nist.gov/pub/time/leap-seconds.3676924800
MFC after: 3 days
In mountd.c, the grouplist structures are linked into a single global
linked list headed by "grphead". The only use of this linked list is
to free all list elements when the exportlist elements are also all being
free'd at the time the exports are being reloaded.
This patch replaces this one global linked list head with a list head in
each exportlist structure, where the grouplist elements for that exported
file system are linked.
The only change is that now the grouplist elements are free'd with the
associated exportlist element as they are free'd instead of all grouplist
elements being free'd after the exportlist elements are free'd. This
change should have no effect in practice.
This is being done, since a future patch that will add a "-I" option for
incrementally updating the exports in the kernel needs to know which
grouplist elements are associated with each exported file system and
having them linked into a list headed by the exportlist element does that.
MFC after: 1 month
Factor code into two functions.
read_exportfile() a functon which reads the exports file(s) and calls
get_exportlist_one() to process each of them.
delete_export() a function which deletes the exports in the kernel for a file
system.
The contents of these functions is just the same code as was used to do the
operations, moved into separate functions. As such, there is no semantic change.
This is being done in preparation for a future commit that will add an
option to do incremental changes of kernel exports upon receiving SIGHUP.
MFC after: 1 month
As per https://datacenter.iers.org/data/latestVersion/16_BULLETIN_C16.txt:
INTERNATIONAL EARTH ROTATION AND REFERENCE SYSTEMS SERVICE (IERS)
SERVICE INTERNATIONAL DE LA ROTATION TERRESTRE ET DES SYSTEMES DE REFERENCE
SERVICE DE LA ROTATION TERRESTRE DE L'IERS
OBSERVATOIRE DE PARIS
61, Av. de l'Observatoire 75014 PARIS (France)
Tel. : +33 1 40 51 23 35
e-mail : services.iers@obspm.frhttp://hpiers.obspm.fr/eop-pc
Paris, 07 January 2019
Bulletin C 57
To authorities responsible
for the measurement and
distribution of time
INFORMATION ON UTC - TAI
NO leap second will be introduced at the end of June 2019.
The difference between Coordinated Universal Time UTC and the
International Atomic Time TAI is :
from 2017 January 1, 0h UTC, until further notice : UTC-TAI = -37 s
Leap seconds can be introduced in UTC at the end of the months of December
or June, depending on the evolution of UT1-TAI. Bulletin C is mailed every
six months, either to announce a time step in UTC, or to confirm that there
will be no time step at the next possible date.
Christian BIZOUARD
Director
Earth Orientation Center of IERS
Observatoire de Paris, France
Requested by: rgrimes
Obtained from: ftp://tycho.usno.navy.mil/pub/ntp/leap-seconds.3757622400
MFC after: 3 days
This patch moves the code that removes and frees all exportlist elements
out into a separate function called free_exports().
It does the same for the insertion of a new exportlist entry into a list.
It also adds a second argument to ex_search() for the list to use.
None of these changes have any semantic effect. They are being done to
prepare the code for future patches that convert the single linked list
for the exportlist to a hash table of lists and a patch that will do
incremental changes of exports in the kernel.
And it fixes the argument for SLIST_HEAD_INITIALIZER() to be a pointer,
which doesn't really matter, since SLIST_HEAD_INITIALIZER() doesn't use
the argument.
MFC after: 1 month
- Remove Tn macros
- Refernce sysctl(8) instead of sysctl(1)
- Start new sentences on new lines
- Capitalize NFS where needed
- Use Fx for FreeBSD
- Remove a list block (Bl) that was added to the manual page
by accident in r335174
Reviewed by: bcr
Approved by: doc (bcr)
Differential Revision: https://reviews.freebsd.org/D20215
Remove unnecessary `char*` casting for arguments passed to `cget*(3)`, and
deconst `_PATH_PRINTCAP` before passing it to `cget*` via the `printcapdb`
variable.
This unblocks ^/projects/runtime-coverage-v2 from building cleanly on
universe13a.freebsd.org. I suspect the issue was introduced through some
changes to `bsd.*.mk` inclusion on the branch, which I will continue to
investigate/isolate.
MFC after: 1 week
Tested with: clang 8 (arm64)
The Windows virtio driver ignores the advertized seg_max field and
assumes the host can accept up to 67 segments in indirect descriptors,
triggering an assert in the bhyve process.
This brings back r282922 but with a couple of changes:
- It raises the block interface segment limit to 128 instead of 67.
- Linux's virtio driver assumes that the segment limit is no
larger than the ring size. To avoid breaking Linux guests,
raise the VirtIO ring size to 128, and cap the VirtIO segment
limit at ring size - 2 (effectively 126).
Reviewed by: rgrimes, Patrick Mooney <pmooney@pfmooney.com>
Obtained from: Joyent (Linux workaround)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18831
Port the logic used by getifaddrs(3) to handle the case where
NET_RT_IFLIST returns ENOMEM, which can occur if the list size changes
between the buffer allocation and sysctl read.
PR: 195191
Submitted by: Guy Yur <guyyur@gmail.com> (original version)
MFC after: 1 week
It was reported that without #ifdef INET6 around the declaration of "nbuf",
a build would report an unused variable. For some reason, I didn't see that
warning when I did a build, but it seems reasonable to add these #ifdef INET6's.
Submitted by: dmitryluhtionov@gmail.com
MFC after: 1 week
When the CPU Topology was added to bhyve in r332298 the SMBIOS table was
missed, this table passes topology information to the system and was still
using the old concept of each vCPU is a socket with 1 core and 1 thread.
This code did not even try to use the old sysctl information to adjust
this data.
Correct that by building a proper SMBios table, mapping the > 254 cases to
0 per the SMBios 2.6 specification that is claimed by the structure.
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Approved by: bde and/or phk (mentor), jhb (maintainer)
MFC: 3 days
Differential Revision: https://reviews.freebsd.org/D18998
The bhyve acpi MADT table was given a static space of 256 (0x100) bytes,
this is enough space to allow VM_MAXCPU to be 21, this patch changes that
so VM_MAXCPU can be of arbitrary value and not overflow the space by
actually calculating the space needed for the table.
PR: 212782
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Approved by: bde (mentor), jhb (maintainer)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18815
r346190 added support for printing of INET6 addresses for the "-o" option
(all opens) but missed adding support for INET6 addresses for the "-l" option.
This patch adds that support.
PR: 223036
MFC after: 1 week
Parse the R_MIPS_32 and R_MIPS_64 relocations. Both Elf_Rel and
Elf_Rela relocations are handled since O32 MIPS uses Elf_Rel while N64
uses Elf_Rela. Note that R_MIPS_32 is only handled for 32-bit mips
and R_MIPS_64 for 64-bit. N32 is untested.
Reviewed by: imp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D19870
points at the "latest" branch and one which points at the "quarterly"
branch. Install the "latest" version unless overridden via the newly
added PKGCONFBRANCH variable.
This does not change user-visible behaviour (assuming said vairable is
not set) but will make it easier to change the defaults in the future --
on stable branches we will want "latest" on x86 but "quarterly" elsewhere.
Discussed with: gjb
MFC after: 3 days
X-MFC: After MFCing this I'll make a direct commit to stable/* to
switch non-x86 architectures to "quarterly".
Previous spellings of my name (NGie, Ngie) weren't my legal spelling. Use Enji
instead for clarity.
While here, remove "All Rights Reserved" from copyrights I "own".
MFC after: 1 week
bhyve was previously using stdin for both reading and writing to the
console, which made it difficult to redirect console output. Use
stdin for reading and stdout for writing. This makes it easier to use
bhyve as a backend for syzkaller.
As a side effect, the change fixes a minor bug which would cause bhyve
to fail with ENOTCAPABLE if configured to use nmdm for com1 and stdio
for com2.
bhyveload already uses separate descriptors, as does the bvmcons driver.
Reviewed by: jhb
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19788
Jobs using the @<second> syntax currently only get executed if they exist
when cron is started. The simplest reproducer of this is:
echo '@20 root echo "Hello!"' >> /etc/cron.d/myjob
myjob will get loaded at the next second==0, but this echo job will not
run until cron restarts. These jobs are normally handled in
run_reboot_jobs(), which sets e->lastexit of INTERVAL jobs to the startup
time so they run 'n' seconds later.
Fix this by special-casing TargetTime > 0 in the database load. Preexisting
jobs will be handled at startup during run_reboot_jobs as normal, but if
we've reloaded a database during runtime we'll hit this case and set
e->lastexit to the current time when we process it. They will then run every
'n' seconds from that point, and a full restart of cron is no longer
required to make these jobs work.
Reported by: Juraj Lutter (otis_sk.freebsd.org)
Reviewed by: allanjude, bapt, bjk (earlier version), Juraj Lutter
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19924
This is useful for arm (possibly other arches too) where we want to have
a GENERIC kernel that only include files for the different SoC. Since
multiple SoCs/Board needs the same device we would need to do either :
Include the device in a generic file
Include the device in each file that really needs it
Option 1 works but if someone wants to create a specific kernel config
(which isn't uncommon for embedded system), he will need to add a lots
of nodevice to it.
Option 2 also works but produce a lots of warnings.
Reviewed by: kevans
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19424
This changes the sender mail address in a similar fashion to how MAILTO may
change the recipient. The default from address remains unchanged.
MFC after: 1 week
Backing out commit pending further discussion on the PCIe version
supported by pseudo (i.e. emulated) devices. See Differential for
details.
Reviewed by: imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D19580
The patch adds support for printing of INET6 callback addresses.
It also adds the #ifdef INET, INET6 as requested by bz@.
PR: 223036
Reviewed by: bz, rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19839
DEBUG_FLAGS is always added to CFLAGS. This setting appears to be
accidental and came in with r243327.
Reviewed by: anish, emaste, jhb, rgrimes
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19787
r345994 has finally fixed the bug that caused the nfsuserd(8) daemon to
fail when jails were enabled, so delete the BUGS entry from the man page.
PR: 205193
MFC after: 2 weeks
are enabled.
The nfsuserd(8) daemon does not function correctly when jails are enabled,
since localhost gets mapped to another IP address and, as such, the upcall
RPC fails.
This patch fixes the problem by doing a getsockname(2) of a socket mapped
to localhost to find out what the correct address is for the comparison
test with the upcall's from IP address.
This patch also adds INET6 support and the required #ifdef's for INET and
INET6. It now uses INET6 by default for the upcalls, if the kernel has
INET6 support and the daemon is also built with INET6 support.
Tested by: freebsd@danielengel.com (earlier version)
PR: 205193
Reviewed by: bz, rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19218
bhyve's NVMe emulation was transferring Identify data back to the guest
incorrectly causing memory corruptions. These corruptions resulted in
core dumps and other system level errors in the guest.
In their simplest form, NVMe Physical Region Page (PRP) values in
commands indicate which physical pages to use for data transfer. The
first PRP value is not required to be page aligned but does not cross a
page boundary. The second PRP value must be page aligned, does not cross
a page boundary, and need not be contiguous with PRP1.
The code was copying Identify data past the end of PRP1. This happens to
work if PRP1 and PRP2 are physically contiguous but will corrupt guest
memory in unpredictable ways if they are not.
Fix is to copy the Identify data back to the guest piecewise (i.e. for
each PRP entry). Also fix a similarly wrong problem when copying back
Log page data.
Reviewed by: imp (mentor), araujo, jhb, rgrimes, bhyve
Approved by: imp (mentor), bhyve (jhb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19695
The NVMe specification defines bits 13:4 of BAR0 as Reserved (i.e. 0x0).
Most drivers do not enforce this, but the Windows NVMe driver does and
will refuse to start the device (i.e. error 10) if any of these bits are
set.
The current BAR size calculation tries to minimize the amount of memory
the device reserves by scaling the BAR size by the maximum number of
queues supported by the device. But unless the device supports a large
number of queue pairs (over 1536), it will reserve too little memory.
The fix is to allocate a minimum of 16K bytes for BAR0.
Tested on Windows Server 2016 and 2019
Reviewed by: imp (mentor), araujo, jhb, bhyve
Approved by: imp (mentor), bhyve (jhb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19676
This patch adds a new table begemotSnmpdTransInetTable that uses the
InetAddressType textual convention and can be used to create listening
ports for IPv4, IPv6, zoned IPv6 and based on DNS names. It also supports
future extension beyond UDP by adding a protocol identifier to the table
index. In order to support this gensnmptree had to be modified.
Submitted by: harti
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16654
CXXSTD was added as the C++ analogue to CSTD.
CXXSTD defaults to `-std=c++11` with supporting compilers; `-std=gnu++98`,
otherwise for older versions of g++.
This change standardizes the CXXSTD variable, originally added to
googletest.test.inc.mk as part of r345203.
As part of this effort, convert all `CXXFLAGS+= -std=*` calls to use `CXXSTD`.
Notes:
This value is not sanity checked in bsd.sys.mk, however, given the two
most used C++ compilers on FreeBSD (clang++ and g++) support both modes, it is
likely to work with both toolchains. This method will be refined in the future
to support more variants of C++, as not all versions of clang++ and g++ (for
instance) support C++14, C++17, etc.
Any manual appending of `-std=*` to `CXXFLAGS` should be replaced with CXXSTD.
Example:
Before this commit:
```
CXXFLAGS+= -std=c++14
```
After this commit:
```
CXXSTD= c++14
```
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 1 month
MFC with: r345203, r345704, r345705
Relnotes: yes
Tested with: make tinderbox
Differential Revision: https://reviews.freebsd.org/D19732
