Post-cold sleep instead of DELAY when waiting for firmware.
Convert softc mutex to an SX lock. Change all waits to sleeps
once interrupts are enabled (and it is safe to sleep).
Submitted by: Matt Macy <matt@mattmacy.io>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12101
These firmwares come from a pre-release snapshot. The final firmwares
in this Chelsio release cycle will likely be .61.0 or later and those
will be the next "long lived" firmwares in FreeBSD head and stable
branches. .59 is being provided in head (only) for wider test exposure.
Obtained from: Chelsio Communications
Sponsored by: Chelsio Communications
LDBL_MAX is broken on i386:
https://lists.freebsd.org/pipermail/freebsd-numerics/2012-September/000288.html
Gcc has produced +Infinity for LDBL_MAX on i386 and amd64 with -m32
for some time, and newer versions of gcc are now warning that the
"floating constant exceeds range of 'long double'". Avoid this by
referring to proxy values instead.
Reviewed by: bde
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
illumos 4185 ("add new cryptographic checksums to ZFS: SHA-512,
Skein, Edon-R") was intentionally merged only partially in r289422,
without adding support for skein, sha512 and edonr on FreeBSD.
Support for skein and sha512 was added later on, but edonr is still not
implemented in FreeBSD.
Prior to this commit zfs(8) correctly rejected edonr, but with an error
message that claimed support:
fk@r500 ~ $zfs set checksum=edonr tank
cannot set property for 'tank': 'checksum' must be one of 'on | off | fletcher2 | fletcher4 | sha256 | sha512 | skein | edonr'
PR: 204055
Submitted by: Fabian Keil
Approved by: allanjude
Obtained from: ElectroBSD
MFC after: 1 week
conversion functions use SSE2 instructions, but these are not guarded by
#ifdef __SSE2__, and there is no implementation using general purpose
registers. For these functions, use the generic C variants instead,
otherwise they will cause SIGILL on older processors.
Reported by: bsdpr@phoe.frmug.org
PR: 221733
MFC after: 1 week
This patch changes the way XPT_GDEV_TYPE works for NVMe. The current
ccb_getdev structure includes pointers to the NVMe Identify Controller
and Namespace structures, but these are kernel virtual addresses which
are not accessible from user space.
As an alternative, the patch changes the pointers into padding in
ccb_getdev and adds two new types to ccb_dev_advinfo to retrieve the
Identify Controller (CDAI_TYPE_NVME_CNTRL) and Namespace
(CDAI_TYPE_NVME_NS) data structures.
Reviewed By: rpokala, imp
Differential Revision: https://reviews.freebsd.org/D10466
Submitted by: Chuck Tuffli
Tuffli had submitted a more thorough patch that I was unaware of when
I did my work and this brings in the bits I missed from that patch.
PR: 220267
Submitted by: Chuck Tuffli
This adds support in pass(4) for data to be described with a
scatter-gather list (sglist) to augment the existing (single) virtual
address.
Differential Revision: https://reviews.freebsd.org/D11361
Submitted by: Chuck Tuffli
Reviewed by: imp@, scottl@, kenm@
Provided a better estimate for the number of transactions that can be
pending at one time. This will be number of queues * number of
trackers / 4, as suggested by Jim Harris. This gives a better estimate
of the number of transactions that CAM should queue before applying
back pressure. This should be revisted when we have real multi-queue
support in CAM and the upper layers of the I/O stack.
Sponsored by: Netflix
creating hardware VIs.
This fixes a bad race on systems with hw.cxgbe.num_vis > 1.
Reported by: olivier@
MFC after: 1 week
Sponsored by: Chelsio Communications
The actual cache line size has always been 64 bytes.
The 128 number arose as an optimization for Core 2 era Intel processors. By
default (configurable in BIOS), these CPUs would prefetch adjacent cache
lines unintelligently. Newer CPUs prefetch more intelligently.
The latest Core 2 era CPU was introduced in September 2008 (Xeon 7400
series, "Dunnington"). If you are still using one of these CPUs, especially
in a multi-socket configuration, consider locating the "adjacent cache line
prefetch" option in BIOS and disabling it.
Reported by: mjg
Reviewed by: np
Discussed with: jhb
Sponsored by: Dell EMC Isilon
Before r207410, the hold count of a page in a page queue was protected
by the queue lock, and, before laundering a page, the page daemon
removed managed writeable mappings of the page before releasing the
queue lock. This ensured that other threads could not concurrently
create transient writeable mappings using pmap_extract_and_hold() on a
user map, as is done for example by vmapbuf(). With that revision,
however, a race can allow the creation of such a mapping, meaning that
the page might be modified as it is being laundered, potentially
resulting in it being marked clean when its contents do not match
those given to the pager. Close the race by using the page lock to
synchronize the hold count check in vm_pageout_cluster() with the
removal of writeable managed mappings.
Reported by: alc
Reviewed by: alc, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12084
according to the enabled interface capability bits. Also remove
some dead code, which tried to preserve already set contents of
E1000_WUC while that register is completely overwritten shortly
after in all cases.
FAT specification requires that for valid FAT, FAT cluster 0 has a
specific value derived from the BPB media descriptor. The lowest
(little-endian) byte must be equal to bpb.bpbMedia, other bits in the
cluster number must be all 1's. Implement the check to reduce the
chance of the randomly corrupted FAT to pass the mount attempt.
Submitted by: Siva Mahadevan <smahadevan@freebsdfoundation.org>
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D12124
This fixes interrupt storms on hardware using legacy level-triggered
interrupts, since doorbell processing could take time after interrupt
handler completion, that triggered extra interrupts in a loop.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Since the doorbell bit is already set when interrupt handler is called,
the event was not propagated to upper layer. It was working normally
because present code was not using masking actively, but that is going
to change.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
The old code allowed calling vdrop() before insmntque() to place the vnode back
onto the freelist for later recycling. Some downstream consumers may rely on
this support. Normally insmntque() failing is fine since is uses vgone() and
immediately frees the vnode rather than attempting to add it to the freelist if
vdrop() were used instead.
Also assert that vhold() cannot be used on such a vnode.
Reviewed by: kib, cem, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12126
new use of the vm_object's lock to synchronize updates to a radix trie
mapping per-vm object page indices to on-disk swap blocks.
Fix a typo in a nearby comment.
Reviewed by: kib, markj
X-MFC with: r322913
Differential Revision: https://reviews.freebsd.org/D12134
vm_object page indices to on-disk swap space (r322913) has changed the
synchronization requirements for a couple swap pager functions. Whereas
before a read lock on the vm object sufficed because of the global mutex
on the hash table, a write lock on the vm object may now be required. In
particular, calls to vm_pager_page_unswapped() now require a write lock on
the vm_object. Consequently, vm_fault()'s fast path cannot call
vm_pager_page_unswapped(). The swap space will have to be released at a
later point.
Reviewed by: kib, markj
X-MFC with: r322913
Differential Revision: https://reviews.freebsd.org/D12134
This feature comes from the fact that we rely memory-backed md(4)
in our build process heavily. However, if the build goes haywire
the allocated resources (i.e. swap and memory-backed md(4)'s) need
to be purged. It is extremely useful to have ability to attach
arbitrary labels to each of the virtual disks so that they can
be identified and GC'ed if neecessary.
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D10457
There were two bugs related to the blackhole detection:
* The smalles size was tried more than two times.
* The restored MSS was not the original one, but the second
candidate.
MFC after: 1 week
Sponsored by: Netflix, Inc.
GCC only activates C11 keywords in C mode, not C++ mode. This means
that when targeting an older C++ standard, we cannot fall back to using
_Static_assert(). In this case, do define _Static_assert() as a macro
that uses a typedef'ed array.
Discussed in: r322875 commit thread
Reported by: Mark MIllard
MFC after: 1 month
Decode fields from the siginfo_t stored in the PT_LWPINFO structure when a
signal is caught by a traced process. This includes the signal code
(si_code) as well as additional members such as si_addr, si_pid, etc.
Print the full conflicting oid path, and include the function name in the
warning so it is clear that the warnings are sysctl-related.
PR: 221853
Submitted by: Fabian Keil <fk AT fabiankeil.de> (earlier version)
Sponsored by: Dell EMC Isilon
This helps reduce the WORLDTMP footprint slightly.
Based on a patch I submitted 5 years ago to GNATS.
PR: 174051
MFC after: 2 weeks
Relnotes: yes (anyone who cross-builds with MK_TCSH=yes will run into
build failures if the host doesn't have tcsh(1))
Reminded by: Fabian Keil <fk@fabiankeil.de>
Tx power values can easily fit into uint8_t + only 8 bits are written
to registers; values may overflow only in case if ROM contains
malformed data (but limit is checked anyway).
Tested with RTL8188CUS, dev.rtwn.1.debug=0x2000 (no changes).
