implementations can provide a base zero ffs function if they wish.
This changes
#define RQB_FFS(mask) (ffs64(mask))
foo = RQB_FFS(mask) - 1;
to
#define RQB_FFS(mask) (ffs64(mask) - 1)
foo = RQB_FFS(mask);
On some platforms we can get the "- 1" for free, eg: those that use the
C code for ffs64().
Reviewed by: jake (in principle)
Consequently, use vm_map_insert() and vm_map_delete(), which expect
the vm_map to be locked, instead of vm_map_find() and vm_map_remove(),
which do not.
Register the ISR early, but do not actually kick off the timer until we
see some activity. This still saves us from running the arp timers on
a system with no network cards.
- Added a mutex, kld_mtx, to protect the kernel_linker system. Note that
while ``classes'' is global (to that file), it is only read only after
SI_SUB_KLD, SI_ORDER_ANY.
- Add a SYSINIT to flip a flag that disallows class registration after
SI_SUB_KLD, SI_ORDER_ANY.
Idea for ``classes'' read only by: jake
Reviewed by: jake
allocator.
- Properly set M_ZERO when talking to the back end page allocators for
non malloc zones. This forces us to zero fill pages when they are first
brought into a cache.
- Properly handle M_ZERO in uma_zalloc_internal. This fixes a problem where
per cpu buckets weren't always getting zeroed.
in a user process gaining visibility into the 'old' contents of a filesystem
block. There were two cases: (1) when uiomove() fails (user process issues
illegal write), and (2) when uiomove() overlaps a mmap() of the same file at
the same offset (fault -> recursive buffer I/O reads contents of old block).
Unfortunately 1.72 also had the unintended effect of forcing the filesystem
to do a read-before-write in the case of a full-block-write (non append case),
e.g. 'dd if=/dev/zero of=test.dat bs=1m count=256 conv=notrunc'. This
destroys performance.. not only is a read forced for every write, but
clustering breaks as well.
The solution is to clear the buffer manually in the full-block case rather
then asking BALLOC to do it (BALLOC issues the read-before-write). In the
partial-block case we want BALLOC to do it because the read-before-write
is necessary. This patch should greatly improve database and news-feed
server performance.
Found by: MKI <mki@mozone.net>
MFC after: 3 days
uifind() with a proc lock held.
change_ruid() and change_euid() have been modified to take a uidinfo
structure which will be pre-allocated by callers, they will then
call uihold() on the uidinfo structure so that the caller's logic
is simplified.
This allows one to call uifind() before locking the proc struct and
thereby avoid a potential blocking allocation with the proc lock
held.
This may need revisiting, perhaps keeping a spare uidinfo allocated
per process to handle this situation or re-examining if the proc
lock needs to be held over the entire operation of changing real
or effective user id.
Submitted by: Don Lewis <dl-freebsd@catspoiler.org>
release of Giant.
o Reduce the scope of GIANT_REQUIRED in vm_map_insert().
These changes will enable us to remove the acquisition and release
of Giant from obreak().
so that /dev/mumble can be the entrypoint to some networking graph,
e.g. a tunnel or a remote tape drive or whatever...
Not fully tested (by me) yet.
Submitted by: Mark Santcroos <marks@ripe.net>
MFC after: 3 weeks
This facilitates the use in circumstances where you are using a serial
console as well. GDB doesn't support anything higher than 9600 baud (19k2
if you are lucky), but the console does.
allocated slabs and bucket caches for free items. It will not go ask the vm
for pages. This differs from M_NOWAIT in that it not only doesn't block, it
doesn't even ask.
- Add a new zcreate option ZONE_VM, that sets the BUCKETCACHE zflag. This
tells uma that it should only allocate buckets out of the bucket cache, and
not from the VM. It does this by using the M_NOVM option to zalloc when
getting a new bucket. This is so that the VM doesn't recursively enter
itself while trying to allocate buckets for vm_map_entry zones. If there
are already allocated buckets when we get here we'll still use them but
otherwise we'll skip it.
- Use the ZONE_VM flag on vm map entries and pv entries on x86.
during the previous probe are stale.
What really should be done is route the probe through
device_probe_and_attach bit this is one of those ICBBATIASS (I can't be
bothered as there is a simpler solution). The user can easily replug the
device after kldloading a new device driver.
'make load' if an object dir was, like it is used in /sys/modules. I.e.
cd /sys/modules/umass
make obj
make
make load
works again without having to install the module.
If no objdir was used the module in the current directory is used.
magic numbers. Use stxa_sync instead of stxa; membar #Sync; to ensure
that no instruction is placed between the two. This can cause random
corruption even though interrupts are already disabled.
o Move pmap_pageable() outside of Giant in vm_fault_unwire().
(pmap_pageable() is a no-op on all supported architectures.)
o Remove the acquisition and release of Giant from mlock().
CAM_QUIRK_HILUN devices we loop thru 32bits of lun. Oops.
Switch to using USEC_DELAY rather than USEC_SLEEP at isp_reset time.
Try to paper around a defect in clients that don't correctly registers
themeselves with the fabric nameserver.
Minor updates for Mirapoint support- they still use code that is not
HANDLE_LOOPSTATE_IN_OUTER_LAYERS, and, surprise surprise, this old
stuff had some bugs in it.
Clean up some target mode stuff.
MFC after: 1 week
topology, speed, loopid, WWPN/WWNN, etc.
Beef up target mode. Add isp_handle_platform_notify_scsi and
isp_handle_platform_notify_fc platform handlers to handle immediate
notifies (isp_handle_platform_notify_scsi is still stubbed out).
In implementation of isp_handle_platform_notify_fc, for IN_ABORT_TASK,
peel off a pending XPT_IMMED_NOTIFY and call xpt_done on it and hope
that somebody upstream is listening.
Make sure on final CTIO2s that we set residual correctly. These are
absolutely crucial. Make sure we set relative offset for each CTIO2
based upon bytes we've already xferred. This is what the private
adjunct datat to the original ATIO is. Note state of command so
we can figure out where to find it if we get an ABORT from the firmware.
Make sure we *always* set CAM_TAG_ACTION_VALID for ATIO2s. Make sure
we keep track of the original lun.
If se sent status (or we're otherwise done with the command), don't
forget to free the adjunct structure.
(so we can, when things get lost, find out who currently is processing
on behalf of this open exchange. Invariably, when things are lost and
wedged, it's CAM).
Keep an atio resource counter locally.
MFC after: 1 week
running ABOUT FIRMWARE with some that were started by BIOS downloads).
Redo CTIO2 dma mapping- use continuation segments instead of multiple
CTIO2s. Thanks to Veritas for sponsoring this work (in a different
context).
MFC after: 1 week
to *not* do flow control based upon resource counts for the firmware.
Increase default immediate notify count to 16.
Change isp_target_async to a function returning an integer.
within the HARP atm stack and the hea and hfa device drivers, but since
all of these systems were changed to use UMA zones, there is no use for
the api any longer.
vm_map_user_pageable().
o Remove vm_map_pageable() and vm_map_user_pageable().
o Remove vm_map_clear_recursive() and vm_map_set_recursive(). (They were
only used by vm_map_pageable() and vm_map_user_pageable().)
Reviewed by: tegge
the necesary uma_zcreate() and uma_zdestroy calls into module loading
handler and the device attach handling.
- Change the related HARP netatm code to use UMA zone functions when
dealing with the zones that were formerly the ATM interface (hea, hfa)
storage pools.
- Have atm_physif_freenifs() now get passed an uma_zone_t so that we can
properly free the allocated NIF's back to their zone.
This should be the last commit to remove any code that makes use of the
netatm storage pool api. I will be removing the api code within the near
future.
Reviewed by: mdodd
indication of whether this happenned so the calling function
knows whether or not to unlock the pcb.
Submitted by: Jennifer Yang (yangjihui@yahoo.com)
Bug reported by: Sid Carter (sidcarter@symonds.net)
Ensure that the syn cache's syn-ack packets contain the same
ip_tos, ip_ttl, and DF bits as all other tcp packets.
PR: 39141
MFC after: 2 weeks
This time, make sure that ipv4 specific code (aka all of the above)
is only run in the ipv4 case.
adding vnode to hash. The fix is to use atomic hash-lookup-and-add-if-
not-found operation. The odd thing is that this race can't happen
actually because the lowervp vnode is locked exclusively now during the
whole process of null node creation. This must be thought as a step
toward shared lookups.
Also remove vp->v_mount checks when looking for a match in the hash,
as this is the vestige.
Also add comments and cosmetic changes.
be a few bits left to clean from the HARP code in terms of what is using
the storage pools; once that's done, the memory management code can be
removed entirely.
This commit effectively changes the use of dynamic memory routines from
atm_allocate, atm_free, atm_release_pool to uma_zcreate, uma_zalloc,
uma_zfree, uma_zdestroy.
handshake between the ISR and the worker thread. Move the mutex lock
so that it only protects the cv_wait. This elimiates the not sleeping
with pccbb1 held messages some people were seeing.
Reviewed by: jhb (at least an early version)
code. Both tasks are not always performed completely by the firmware.
The former is required to get some e450 models to boot; the latter fixes
the repeated fifo underruns with hme(4)s and gem(4)s observed on some
machines (and probably performance problems with other peripherals as
well).
do not blunder around enabling interrupts and running trap handlers.
trap_pfault() will normally pass control to ddb's fault handler which
will normally do the right thing.
This bug is very old. but in old versions of FreeBSD it is probably only
serious for trap handling that involves sleeping. In -current, attempting
to examine unmapped memory while stopped at a breakpoint at mi_switch()
was always fatal.
Submitted by: tegge
o Eliminate the "!mapentzone" check from vm_map_entry_create() and
vm_map_entry_dispose(). Reviewed by: tegge
o Fix white-space usage in vm_map_entry_create().
or user vm_maps. This implementation has two key benefits when compared
to vm_map_{user_,}pageable(): (1) it avoids a race condition through
the use of "in-transition" vm_map entries and (2) it eliminates lock
recursion on the vm_map.
Note: there is still an error case that requires clean up.
Reviewed by: tegge
obviously bogous return value of ad1816chan_setformat().
PR: 37932
Submitted by: Martin Kaeske <Martin.Kaeske@Stud.TU-Ilmenau.DE>
Reviewed by: hm
MFC after: 10 days
o Add a stub for vm_map_wire().
Note: the description of the previous commit had an error. The in-
transition flag actually blocks the deallocation of a vm_map_entry by
vm_map_delete() and vm_map_simplify_entry().
in their tlb which the prom doesn't clear out, so we have to do so manually
before mapping the kernel page table or the cpu can hang due various
conditions which cause undefined behaviour from the tlb.
or user vm_maps. In accordance with the standards for munlock(2),
and in contrast to vm_map_user_pageable(), this implementation does not
allow holes in the specified region. This implementation uses the
"in transition" flag described below.
o Introduce a new flag, "in transition," to the vm_map_entry.
Eventually, vm_map_delete() and vm_map_simplify_entry() will respect
this flag by deallocating in-transition vm_map_entrys, allowing
the vm_map lock to be safely released in vm_map_unwire() and (the
forthcoming) vm_map_wire().
o Modify vm_map_simplify_entry() to respect the in-transition flag.
In collaboration with: tegge
options do. Comments should be in NOTES and having the comments in two
places usually means that one place will just bitrot. Thus, remove the
comment for KTRACE_REQUEST_POOL from the previous revision.
Requested by: bde
